EBBERT RIVETING SOLUTIONS SALES & ENGINEERING GUIDE 06-05-015 HK1060
CONTENTS CONTENTS... TOOLS ERT1S... & 4 ERTS...5 & 6 ERTS...7 & 8 ERT4S...9 & 10 ERT5S...11 & 1 ERT6S...1 & 14 ERTSMQ...15 & 16 ERT9 & ERT9V...17 & 18 POWER SYSTEMS EPS1V & EPS1... 19 EPS4MP-4... 0 EPS6V (PNEUMATIC POWER SOURCE)... 1 ERT7 & ERT8 (PNEUMATIC TOOLS)... - 4 PULLING HEAD SAMPLE PULLING HEAD DRAWINGS... 5 NOSEPIECES AND RELATED RIVET TYPE/SIZE...6 & 7 HUCK WORLD-WIDE LOCATIONS... 8
ERT1S (Single Acting) - / - /16 Blind Rivets - Pistol Style Tool - Lightest Weight Tool In The Product Line (lbs.) - Fastest Cycle Time - /4 Of Pull Stroke - Rated Pull Force 1,99 lbs. - Tool Designed For Remote Pintail Collection.97 4.6.00 76. 6.08 154.6 5.0 17.4 1.5 1.7.69 17.5.00 50.8 7.04 178.8 8.10 05.7 INCHES MM
ERT1S (Single Acting Tool) Available Pulling Heads P H _ F 1 1 4 5 6 H Available Hose Assemblies HA1x 6 8 10 1 15 A B C Note: 8 & 1 are Standard Call for Price and Available for all other lengths Note: A = Vacuum Tube /16-1/4 B = Vacuum Tube /16 C = Vacuum Tube / - 1/8 Available Power Sources: EPS1V P H 1 F 1 I H Pulling Head Jaw Type: F = Follower Nose Length: Tool: Nose Piece Thread Size: S = Spreader 1 = / - 5/ Piece Jaw Blind Rivet = /16-1/4 Piece Jaw Blind Rivet = /16-1/4 Piece Jaw Blind Rivet 4 = Plastic Blind Rivet 1/8 5 = Plastic Blind Rivet 5mm & 6mm PULLING HEAD DESIGNATION CHART 1 = 1-1/4 (Standard) = -/4 = 5-5/8 4 = 7-/4 5 = 8-/4 6 = 11 Notes: - 1-6 Refer to A Dimension on Tech Data Drawings in Rear of Manual. - If Nose Piece Thread Size is Designated as H Add 1/8 to Nose Length. If Follower: No Letter = ERT1S, S & ERT1D I = ERTS & 4S P = ERT9 & 9V L = ERT5S & 6S If Spreader: No Letter = ERTD, ERT4D If Plastic Rivet: No Letter = ERT7S I = ERT8S No Letter = Standard (/8) H = Heavy Duty (7/16) 4
ERTS (Single Acting) - / 1/4 Blind Rivets - Pistol Style Tool - Light Weight Tool (.5 lbs.) - Fast Cycle Time - 15/16 Of Pull Stroke - Tool Designed For Remote Pintail Collection - Rated Pull Force 4,0 lbs..50 88.9.05 5.0 6. 158.0 5.14 10.5.00 50.8 7.4 188. 1.44 6.5.88. 8.66 0.1 INCHES MM 5
ERTS (Single Acting Tool) Available Pulling Heads P H _ F 1 1 4 5 6 H Available Hose Assemblies HA1x 6 8 10 1 15 A B C Note: 8 & 1 are Standard Call for Price and Available for all other lengths Note: A = Vacuum Tube /16-1/4 B = Vacuum Tube /16 C = Vacuum Tube / - 1/8 Available Power Sources: EPS1V P H 1 F 1 I H Pulling Head Jaw Type: F = Follower Nose Length: Tool: Nose Piece Thread Size: S = Spreader 1 = / - 5/ Piece Jaw Blind Rivet = /16-1/4 Piece Jaw Blind Rivet = /16-1/4 Piece Jaw Blind Rivet 4 = Plastic Blind Rivet 1/8 5 = Plastic Blind Rivet 5mm & 6mm PULLING HEAD DESIGNATION CHART 1 = 1-1/4 (Standard) = -/4 = 5-5/8 4 = 7-/4 5 = 8-/4 6 = 11 Notes: - 1-6 Refer to A Dimension on Tech Data Drawings in Rear of Manual. - If Nose Piece Thread Size is Designated as H Add 1/8 to Nose Length. If Follower: No Letter = ERT1S, S & ERT1D I = ERTS & 4S P = ERT9 & 9V L = ERT5S & 6S If Spreader: No Letter = ERTD, ERT4D If Plastic Rivet: No Letter = ERT7S I = ERT8S No Letter = Standard (/8) H = Heavy Duty (7/16) 6
ERTS (Single Acting) - / /16 Blind Rivets - Inline Style Tool - Tool Designed To Be Used With Counter Balancer - Fastest Cycle Time - /4 Of Pull Stroke - Tool Designed For Remote Pintail Collection - Rated Pull Force (1,99 lbs.) - Weight (.5 lbs.).05 5.0 INCHES MM 9.71 46.5 8.6 19. 1.5 19..50 88.9.75 95. 1.7 4.7.00 50.8 7
ERTS (Single Acting Tool) Available Pulling Heads P H _ F _ I _ 1 1 4 5 6 H Available Hose Assemblies HA1x 6 8 10 1 15 A B C Note: 8 & 1 are Standard Call for Price and Available for all other lengths Note: A = Vacuum Tube /16-1/4 B = Vacuum Tube /16 C = Vacuum Tube / - 1/8 Available Power Sources: EPS1V P H 1 F 1 I H Pulling Head Jaw Type: F = Follower Nose Length: Tool: Nose Piece Thread Size: S = Spreader 1 = / - 5/ Piece Jaw Blind Rivet = /16-1/4 Piece Jaw Blind Rivet = /16-1/4 Piece Jaw Blind Rivet 4 = Plastic Blind Rivet 1/8 5 = Plastic Blind Rivet 5mm & 6mm PULLING HEAD DESIGNATION CHART 1 = 1-1/4 (Standard) = -/4 = 5-5/8 4 = 7-/4 5 = 8-/4 6 = 11 Notes: - 1-6 Refer to A Dimension on Tech Data Drawings in Rear of Manual. - If Nose Piece Thread Size is Designated as H Add 1/8 to Nose Length. If Follower: No Letter = ERT1S, S & ERT1D I = ERTS & 4S P = ERT9 & 9V L = ERT5S & 6S If Spreader: No Letter = ERTD, ERT4D If Plastic Rivet: No Letter = ERT7S I = ERT8S No Letter = Standard (/8) H = Heavy Duty (7/16) 8
ERT4S (Single Acting) - / 1/4 Blind Rivets - Inline Style Tool - Tool Designed To Be Used With Counter Balancer - Fast Cycle Time - 15/16 Of Pull Stroke - Tool Designed For Remote Pintail Collection - Rated Pull Force (4,0 lbs.) - Weight (.5 lbs.).05 5.0 INCHES MM 9.71 46.8 8.6 19. 1.5 19..50 88.9.75 95. 1.7 4.7.00 50.8 9
ERT4S (Single Acting Tool) Available Pulling Heads P H _ F _ I _ 1 1 4 5 6 H Available Hose Assemblies HA1x 6 8 10 1 15 A B C Note: 8 & 1 are Standard Call for Price and Available for all other lengths Note: A = Vacuum Tube /16-1/4 B = Vacuum Tube /16 C = Vacuum Tube / - 1/8 Available Power Sources: EPS1V P H 1 F 1 I H Pulling Head Jaw Type: F = Follower Nose Length: Tool: Nose Piece Thread Size: S = Spreader 1 = / - 5/ Piece Jaw Blind Rivet = /16-1/4 Piece Jaw Blind Rivet = /16-1/4 Piece Jaw Blind Rivet 4 = Plastic Blind Rivet 1/8 5 = Plastic Blind Rivet 5mm & 6mm PULLING HEAD DESIGNATION CHART 1 = 1-1/4 (Standard) = -/4 = 5-5/8 4 = 7-/4 5 = 8-/4 6 = 11 Notes: - 1-6 Refer to A Dimension on Tech Data Drawings in Rear of Manual. - If Nose Piece Thread Size is Designated as H Add 1/8 to Nose Length. If Follower: No Letter = ERT1S, S & ERT1D I = ERTS & 4S P = ERT9 & 9V L = ERT5S & 6S If Spreader: No Letter = ERTD, ERT4D If Plastic Rivet: No Letter = ERT7S I = ERT8S No Letter = Standard (/8) H = Heavy Duty (7/16) 10
ERT5S (Single Acting) - / 5/ Blind Rivets - Limited Access Style Tool (Not Core Product) - Tool Designed To Be Used In Confined Spaces - Fast Cycle Time - 7/8 Of Pull Stroke.98.8.8 85.9.0 76. 6.407 16.7.0 51.4 10.75 7.75 19 1.19 0. INCHES mm 11
ERT5S (Single Acting Tool) Available Pulling Heads Available Hose Assemblies P H 1 F 1 L HA5x 1 Available Power Sources: EPS1 P H 1 F 1 I H Pulling Head Jaw Type: F = Follower Nose Length: Tool: Nose Piece Thread Size: S = Spreader 1 = / - 5/ Piece Jaw Blind Rivet = /16-1/4 Piece Jaw Blind Rivet = /16-1/4 Piece Jaw Blind Rivet 4 = Plastic Blind Rivet 1/8 5 = Plastic Blind Rivet 5mm & 6mm PULLING HEAD DESIGNATION CHART 1 = 1-1/4 (Standard) = -/4 = 5-5/8 4 = 7-/4 5 = 8-/4 6 = 11 Notes: - 1-6 Refer to A Dimension on Tech Data Drawings in Rear of Manual. - If Nose Piece Thread Size is Designated as H Add 1/8 to Nose Length. If Follower: No Letter = ERT1S, S & ERT1D I = ERTS & 4S P = ERT9 & 9V L = ERT5S & 6S If Spreader: No Letter = ERTD, ERT4D If Plastic Rivet: No Letter = ERT7S I = ERT8S No Letter = Standard (/8) H = Heavy Duty (7/16) 1
ERT6S (Single Acting) - /16 1/4 Blind Rivets - Limited Access Style Tool (Not Core Product) - Tool Designed To Be Used In Confined Spaces - Fast Cycle Time - 7/8 Of Pull Stroke.98.8.8 85.9.0 76. 6.407 16.7.0 51.4 10.75 7.75 19 1.19 0. INCHES mm 1
ERT6S (Single Acting Tool) Available Pulling Heads Available Hose Assemblies P H _ F 1 L _ HA5x 1 H Available Power Sources: EPS1 P H 1 F 1 I H Pulling Head Jaw Type: F = Follower Nose Length: Tool: Nose Piece Thread Size: S = Spreader 1 = / - 5/ Piece Jaw Blind Rivet = /16-1/4 Piece Jaw Blind Rivet = /16-1/4 Piece Jaw Blind Rivet 4 = Plastic Blind Rivet 1/8 5 = Plastic Blind Rivet 5mm & 6mm PULLING HEAD DESIGNATION CHART 1 = 1-1/4 (Standard) = -/4 = 5-5/8 4 = 7-/4 5 = 8-/4 6 = 11 Notes: - 1-6 Refer to A Dimension on Tech Data Drawings in Rear of Manual. - If Nose Piece Thread Size is Designated as H Add 1/8 to Nose Length. If Follower: No Letter = ERT1S, S & ERT1D I = ERTS & 4S P = ERT9 & 9V L = ERT5S & 6S If Spreader: No Letter = ERTD, ERT4D If Plastic Rivet: No Letter = ERT7S I = ERT8S No Letter = Standard (/8) H = Heavy Duty (7/16) 14
ERTSMQ (Single Acting) - / 1/4 Blind Rivets - Manifold Base Tool With Quick Change Fittings - Fast Cycle Time - 15/16 Of Pull Stroke - Rated Pull Force 4,0 lbs. - Tool Designed For Remote Pintail Collection.05 5.04 1.0 6.0 6.15 156.1 5.06 18.6.4 61.4.875..00 50.8 1/4-0 X 1/" DP PLACES Mounting Holes.65 66.7.50 6.4 INCHES mm.500 1.7 5/16-18 X 1/" DP Mounting Hole.75 9.5.50 6.4.750 19.1 1.500 8.1 15
ERTSMQ (Single Acting Tool) Available Pulling Heads P H _ F 1 1 4 5 6 H Available Hose Assemblies HA6x10 (Air Trigger Hose Assembly) HA7x _ (Hydraulic Hose Assembly) 8 10 15 HA8x (Vacuum Hose Assembly) 10 1 A B C Note: A = Vacuum Tube /16-1/4 B = Vacuum Tube /16 C = Vacuum Tube / - 1/8 Available Power Sources: EPS4MP-4 & EPS4MP-7 P H 1 F 1 I H Pulling Head Jaw Type: F = Follower Nose Length: Tool: Nose Piece Thread Size: S = Spreader 1 = / - 5/ Piece Jaw Blind Rivet = /16-1/4 Piece Jaw Blind Rivet = /16-1/4 Piece Jaw Blind Rivet 4 = Plastic Blind Rivet 1/8 5 = Plastic Blind Rivet 5mm & 6mm PULLING HEAD DESIGNATION CHART 1 = 1-1/4 (Standard) = -/4 = 5-5/8 4 = 7-/4 5 = 8-/4 6 = 11 Notes: - 1-6 Refer to A Dimension on Tech Data Drawings in Rear of Manual. - If Nose Piece Thread Size is Designated as H Add 1/8 to Nose Length. If Follower: No Letter = ERT1S, S & ERT1D I = ERTS & 4S P = ERT9 & 9V L = ERT5S & 6S If Spreader: No Letter = ERTD, ERT4D If Plastic Rivet: No Letter = ERT7S I = ERT8S No Letter = Standard (/8) H = Heavy Duty (7/16) 16
ERT9 & ERT9V (Not Shown) (Pneudraulic Tool) - / 1/4 Blind Rivets - Self Contained Pneudraulic Tool (90 psi) - Available with pintail Collection system (ERT9V) - Lightweight (Only 5.4 Pounds) - 1-1/16 Of Pull Stroke - Capacity: 477 lbs @ 90 psi ERT9.87 98.17 1.81 ø 46.0.87 98.17 1.81 ø 46.0 1.10 7.98 ø 1.580 40.1 1.10 7.98.91.0 8.86 55.04 9.49 41.05.91.0 10.7 6.40 11.45 90.8 10 10 1.40 1.5 ERT9 ERT9V ø.480 6.99 1.54 18.41 1.54 18.41 5.8 16.7 5.8 16.7 4.6 ø 110.6 4.6 ø 110.6 17
ERT9 & 9V (Pneudraulic Tool) Available Pulling Heads P H _ F _ P _ 1 1 4 5 6 H P H 1 F 1 I H Pulling Head Jaw Type: F = Follower Nose Length: Tool: Nose Piece Thread Size: S = Spreader 1 = / - 5/ Piece Jaw Blind Rivet = /16-1/4 Piece Jaw Blind Rivet = /16-1/4 Piece Jaw Blind Rivet 4 = Plastic Blind Rivet 1/8 5 = Plastic Blind Rivet 5mm & 6mm PULLING HEAD DESIGNATION CHART 1 = 1-1/4 (Standard) = -/4 = 5-5/8 4 = 7-/4 5 = 8-/4 6 = 11 Notes: - 1-6 Refer to A Dimension on Tech Data Drawings in Rear of Manual. - If Nose Piece Thread Size is Designated as H Add 1/8 to Nose Length. If Follower: No Letter = ERT1S, S & ERT1D I = ERTS & 4S P = ERT9 & 9V L = ERT5S & 6S If Spreader: No Letter = ERTD, ERT4D If Plastic Rivet: No Letter = ERT7S I = ERT8S No Letter = Standard (/8) H = Heavy Duty (7/16) 18
590441 REV B Ebbert Sales & Engineering Guide EPS1V & EPS1 (Not Shown) Standard Power Unit For Single Acting Tools - Weight: EPS1V - 5lbs. EPS1-45lbs. - Remote Vacuum Mandrel Collector System: (EPS1V Only) 1/4 Mandrels -,600 1/8 Mandrels - 6,000 - Hydraulic Output 4,000psi @ 90psi Air Pressure - Hydraulic Fluid - HYDREX AW 68 - Air Consumption: 0.5 per Stroke Vacuum Generator - 1CFM @ 90psi (EPS1V only) - Incoming Air Line - 1/ I.D. minimum 8. REF 10.6 6.6 4.5 5.4.0 9. 7.7.69.90 1. THIS SIDE VENTED WHEN CLOSED.0 EPS1V MADE IN THE U.S.A. EBBERT ENGINEERING 1 CORPORATE DRIVE KINGSTON, NEW YORK 1401 (800)65-80 (FAX) 845-4-7 E-mail: ebbert@huck.com www.hucktools.com TM.1 9.4 14. 19
590441 REV B Ebbert Sales & Engineering Guide EPS4MP-4 Standard Power Unit For Single Acting Multiple Tools - Weight: EPS4MP-4-69lbs. (Operates 4 Tools)* - Hydraulic Output: @ 90psi Air Pressure - 4,410psi @ 80psi Air Pressure - 4,010psi - Hydraulic Fluid - HYDREX AW 68 - Air Consumption - 0.5 per Stroke - Plant Air Supply - 80/90psi non-oiled - Incoming Air Line - 1/ I.D. minimum - Hose Assemblies Available Up To 15 (Depending On Application) *SIMULTANEOUS OPERATION ONLY 0.8 REF 6.6 4. 9..90 1. THIS SIDE VENTED WHEN CLOSED EPS4MP-4 EBBERT ENGINEERING TM 14..0 MADE IN THE U.S.A. 1 CORPORATE DRIVE KINGSTON, NEW YORK 1401 (800)65-80 (FAX) 845-4-7 E-mail: ebbert@huck.com www.hucktools.com.1 0
EPS6V (Pneumatic Power Source) - / 1/4 Plastic Blind Rivets - EPS6V Is A Pneumatic Power Source With Remote Vacuum Collection System - ERT7 Pistol Style Tool, Fully Pneumatic ERT8 Inline Style Tool, Fully Pneumatic - 1-1/16 Of Pull Stroke ERT7 ERT8 1.0 16. 7.55 1.1 1.1 1
ERT7 Pneumatic Tool.10 5.4.10 5.4 5. 1 6. 160.6 7.14 181.4 8.9 1. 1.44 6.5.875..0 50.8 INCHES mm ERT8 Pneumatic Tool.05 5.0 10.47 65.9 9.8 8.4 1. 8.6 INCHES mm.50 88.9.75 95. 1.7 4.7.00 50.8
ERT7 (Pneumatic Tool) Available Pulling Heads P H 4 5 1 4 Available Hose Assemblies HAx 10 A Available Power Sources: EPS6V P H 1 F 1 I H Pulling Head Jaw Type: F = Follower Nose Length: Tool: Nose Piece Thread Size: S = Spreader 1 = / - 5/ Piece Jaw Blind Rivet = /16-1/4 Piece Jaw Blind Rivet = /16-1/4 Piece Jaw Blind Rivet 4 = Plastic Blind Rivet 1/8 5 = Plastic Blind Rivet 5mm & 6mm PULLING HEAD DESIGNATION CHART 1 = 1-1/4 (Standard) = -/4 = 5-5/8 4 = 7-/4 5 = 8-/4 6 = 11 Notes: - 1-6 Refer to A Dimension on Tech Data Drawings in Rear of Manual. - If Nose Piece Thread Size is Designated as H Add 1/8 to Nose Length. If Follower: No Letter = ERT1S, S & ERT1D I = ERTS & 4S P = ERT9 & 9V L = ERT5S & 6S If Spreader: No Letter = ERTD, ERT4D If Plastic Rivet: No Letter = ERT7S I = ERT8S No Letter = Standard (/8) H = Heavy Duty (7/16)
ERT8 (Pneumatic Tool) Available Pulling Heads P H I 4 5 1 4 Available Hose Assemblies HAx 10 A Available Power Sources: EPS6V P H 1 F 1 I H Pulling Head Jaw Type: F = Follower Nose Length: Tool: Nose Piece Thread Size: S = Spreader 1 = / - 5/ Piece Jaw Blind Rivet = /16-1/4 Piece Jaw Blind Rivet = /16-1/4 Piece Jaw Blind Rivet 4 = Plastic Blind Rivet 1/8 5 = Plastic Blind Rivet 5mm & 6mm PULLING HEAD DESIGNATION CHART 1 = 1-1/4 (Standard) = -/4 = 5-5/8 4 = 7-/4 5 = 8-/4 6 = 11 Notes: - 1-6 Refer to A Dimension on Tech Data Drawings in Rear of Manual. - If Nose Piece Thread Size is Designated as H Add 1/8 to Nose Length. If Follower: No Letter = ERT1S, S & ERT1D I = ERTS & 4S P = ERT9 & 9V L = ERT5S & 6S If Spreader: No Letter = ERTD, ERT4D If Plastic Rivet: No Letter = ERT7S I = ERT8S No Letter = Standard (/8) H = Heavy Duty (7/16) 4
Sample Pulling Head Drawings 00117 (F) FOLLOWER TYPE PULLING HEAD 50571 009 0018 0018 500778 00181 00184 SLEEVE 00118 JAW BUMPER 50571 SPRING (F) FOLLOWER TYPE PULLING HEAD IF USED WITH L STYLE TOOL JAWS JAW FOLLOWER ASSEMBLY 0017 50755 (S) SPREADER TYPE PULL HEAD 50755 00118 00117 5
NOSEPIECES AND RELATED RIVET TYPE/SIZE (STANDARD NOSEPIECE - /8-4 THREAD) 6
NOSEPIECES AND RELATED RIVET TYPE/SIZE (STANDARD NOSEPIECE - 7/16-0 THREAD) 7
A Global Organization Alcoa Fastening Systems (AFS) maintains company offices throughout the United States and Canada, with subsidiary offices in many other countries. Authorized AFS distributors are also located in many of the world s industrial and Aerspace centers, where they provide a ready source of AFS fasteners, installation tools, tool parts, and application assistance. Alcoa Fastening Systems world-wide locations: Americas Far East Europe Alcoa Fastening Systems Aerospace Products Tucson Operations 74 East Columbia Tucson, AZ 85714 800-4-485 50-747-9898 FAX: 50-748-14 Alcoa Fastening Systems Aerospace Products Carson Operations PO Box 568 900 Watson Center Rd. Carson, CA 90749 800-41-1459 10-80-800 FAX: 10-80-146 Alcoa Fastening Systems Commercial Products Kingston Operations 1 Corporate Drive Kingston, NY 1401 800-41-091 845-1-700 FAX: 845-4-7 www.hucktools.com Alcoa Fastening Systems Commercial Products Canada Operations 6150 Kennedy Road, Unit 10 Mississagua, Ontario L5TJ4 Canada 905-564-485 FAX: 905-564-196 Alcoa Fastening Systems Commercial Products Australia Operations 14 Viewtech Place Rowville, Victoria Australia 178 0-764-5500 Toll Free: 008-5-00 FAX: 0-764-5510 Alcoa Fastening Systems Commercial Products United Kingdom Operations Unit C, Stafford Park 7 Telford, Shropshire England TF BQ 0195-90011 FAX: 095-90459 Alcoa Fastening Systems Aerospace Products France Operations Clos D Asseville BP4 95450 Us Par Vigny France -1-0-7-9500 FAX: -1-4-66-0600 Alcoa Fastening Systems Commercial Products Waco Operations PO Box 8117 8001 Imperial Drive Waco, TX 76714-8117 800-88-485 54-776-000 FAX: 54-751-559 Alcoa Fastening Systems Commercial Products Latin America Operations Avenida Parque Lira. 79-40 Tacubaya Mexico, D.F. C.P. 11850 FAX: 55-515-1776 TELEX: 11750 LUKSME For The Long Haul, The Future of Fastening Technology, The Future of Assembly Technology, The Future of Tooling Technology, and Tools of Productivity are service marks of Huck International. Huck provides technical assistance regarding the use and application of Huck fasteners and tooling. NOTICE: The information contained in this publication is only for general guidance with regard to properties of the products shown and/or the means for selecting such products, and is not intended to create any warranty, express, implied, or statutory; all warranties are contained only in Huck s written quotations, acknowledgements, and/or purchase orders. It is recommended that the user secure specific, up-to-date data and information regarding each application and/or use of such products. HWB898 100-5M 00 Alcoa Fastening Systems 1 Corporate Drive, Kingston, NY 1401 Tel: 800-41-091 Fax: 845-4-7 E-mail: hkitoolinfo@alcoa.com www.alcoafasteningsystems.com 8