ADC s OmniReach FTTX Solutions are the industry s first infrastructure solutions designed from the ground up to meet the unique requirements of FTTX networks. Designed for operational efficiency and scalability, OmniReach solutions simplify FTTX network installation, maintenance and management from the central office/headend to the outside plant. ADC s family of NEMA fiber demarcation products provides termination and splicing for fiber cables in environments requiring secure, low profile enclosures. Built with traditional ADC quality and durability, the products promise long service life in harsh environments and help ensure network reliability and flexibility. Features SPEC SHEET Designed to meet NEMA 250 - Type 12 (dust proof, drip proof) Wall mountable in harsh indoor and remote environments Quick installation and cable routing; reduces cost of installation and network maintenance time Accommodates top or bottom cable entry High density, aesthetically attractive design; features rounded, removable front door Space saving, dual fold design with locking, technician-friendly splice area and easy hand access to fiber connectors Separation of termination, splicing functions protects circuit integrity Multiple locking options, including separate lock on splice area; control access to critical parts of the wall box Uses familiar industry interfaces; ADC sliding adapter packs (six packs) with FC, SC, ST, LX.5 or LC connectors, provide high density with superior hand access Accommodates MicroVAMs for signal distribution, WDM and monitoring/test applications Ideal for ribbon splicing; supports stranded splicing
12- and 24-Position Termination side 24-position shown (12-position loaded with two sliding adapter packs) Splicing Side Cable and Panel Compression Fitting Location Grounding (top and bottom) Front View Strength Member Tie-off Location 9.00" (22.86 cm) Optional Splice Tray Shown 7.20" (18.29 cm Patch cord exit (location top and bottom) Sliding adapter pack for customer access Top View 5.49" (13.94 cm) 13.50" (34.29 cm) 2
48-Position Termination side Splicing side Compression Fitting Location (top and bottom) Front View 9.00" (22.86 cm) Cable and Panel Grounding Strength Member Tie-off Locations Patch Cord Exit (location top and bottom) Sliding Adapter Pack for Customer Access Optional Splice Trays Shown Top View Or Lock Available Or Lock Available 10.00" (25.40 cm) 6.34" (16.10 cm) 13.50" (34.29 cm) 3
72-Position Termination side Grounding Stud Splicing Side Optional Splice Trays Shown Cable and Panel Grounding Compression Fitting Location (top and bottom) Front View Strength Member Tie-off Locations 11.00" (27.94 cm) Grounding Stud Patch cord exit (location top and bottom) Sliding adapter pack for customer access Top View 12.80" (32.51 cm 5.69" (14.45 cm) 15.00" (38.10 cm) 4
96-Position Termination side Splicing Side Cable and Panel Grounding Compression Fitting Location (top and bottom) Front View Strength Member Tie-off Locations 11.00" (27.94 cm) Patch Cord Exit (location top and bottom) Sliding Adapter Pack for Customer Access Optional Splicetrays Shown Quarter Turn Latch Top View Quarter Turn Latch Quarter Turn Latch 16.10" (40.89 cm) 6.39" (16.23 cm) 15.00" (38.10 cm) 5
with Pigtails Catalog Number FDB- _S _S X 0 0 Box Size 1 12 fibers 2 24 fibers 4 48 fibers 7 72 fibers 9 96 fibers Adapter/Connector Type Multimode 9 SC 5 ST Y LX.5 6 LC Singlemode OR 2 FC ultra polish L FC with zirconia adapter 7 SC ultra polish N SC with zirconia adapter J SC angled polish 4 ST ultra polish P ST with zirconia adapter K E-2000 angled polish X LX.5 8 LC Pigtail or Adapter Type A Adapters only U 12-fiber stranded R 12-fiber ribbon 4 12-fiber Maxi-Strip (stranded) Number of 6packs loaded Strength Member Tie-offs 0 No strength member tie-offs included 1 1 strength member tie-off included Lock Options A Front lock 1, rear lock 2 B Front lock 2, rear lock 1 C Front lock 1, rear quarter turn D No front lock, rear lock 1 E No front lock, rear lock 2 F No front lock, rear quarter turn G Front lock 1, rear lock 1 Cable Clamps 0 No clamps included 1 1 clamp included 2 2 clamps included Splice Tray/Chip Style 0 None 2 Heat shrink fusion 3 Mechanical/ribbon 6
Preterminated with Multifiber Cable Catalog Number FDB- M 00 Box Size 1 12 fibers 2 24 fibers 4 48 fibers 7 72 fibers 9 96 fibers Adapter/Connector Type Multimode 9 SC 5 ST Y LX.5 6 LC Singlemode OR 2 FC ultra polish L FC with zirconia adapter 7 SC ultra polish N SC with zirconia adapter J SC angled polish 4 ST ultra polish P ST with zirconia adapter K E-2000 angled polish X LX.5 8 LC Cable Type Multimode C IFC stranded 62.5/125 Y IFC stranded (50/125) Singlemode OR A IFC stranded riser-rated F Plenum stranded G OSP single armor stranded H Indoor-outdoor stranded J OSP dielectric stranded K IFC stranded Maxi-Strip M IFC ribbon riser-rated T OSP dielectric ribbon L OSP armored ribbon Cable Size 1 12 2 24 3 36 4 48 7 72 9 96 A 144 Z 2x12 Y 2x24 X 2x36 W 2x48 Strength Member Tie-offs 0 No strength member tie-offs included 1 1 strength member tie-off included Lock Options A Front lock1, rear lock 2 B Front lock 2, rear lock 1 C Front lock 1, rear quarter turn D No front lock, rear lock 1 E No front lock, rear lock 2 F No front lock, rear quarter turn G Front lock 1, rear lock 1 Cable Exit Location U Up D Down Cable Clamps 0 No clamps included 1 1 clamp included 2 2 clamps included Cable Length (in meters) 7
SPEC SHEET Web Site: www.adc.com From North America, Call Toll Free: 1-800-366-3891 Outside of North America: +1-952-938-8080 Fax: +1-952-917-3237 For a listing of ADC s global sales office locations, please refer to our web site. ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101 Specifications published here are current as of the date of publication of this document. Because we are continuously improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc. views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or features contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer 1269044 8/05 Revision 2003, 2004, 2005 ADC Telecommunications, Inc. All Rights Reserved