Make a great improvement of Engine fuel efficiency. Explanation

Similar documents
Hydrocarbons 1 of 29 Boardworks Ltd 2016

Edexcel GCSE Chemistry. Topic 8: Fuels and Earth science. Fuels. Notes.

Unit 7 Part 2 Introduction to Organic Chemistry Crude Oil: Sources and Uses of Alkanes UNIT 7 INTRODUCTION TO ORGANIC CHEMISTRY

Q1. The table shows how much carbon dioxide is produced when you transfer the same amount of energy by burning coal, gas and oil.

M1.(a) C 6 H [5] Page 2. PhysicsAndMathsTutor.com

Premium biological fuel additive for reduction in fuel consumption, particulates & carbon emissions

NGP2010 Diesel Engine Briefing Sept. 18, 2007

Q1. Useful fuels can be produced from crude oil. Crude oil is a mixture of hydrocarbons.

PRACTICE EXAMINATION QUESTIONS FOR 1.6 ALKANES (includes some questions from 1.5 Introduction to Organic Chemistry)

New Energy Activity. Background:

The influence of thermal regime on gasoline direct injection engine performance and emissions

TECHNOLOGY HANDBOOK by THE YOKOHAMA RUBBER CO., LTD. Printed in Germany Printed on recycled paper. CE047 O-TKS abc

ECOMAX Product Details

Module 2:Genesis and Mechanism of Formation of Engine Emissions Lecture 3: Introduction to Pollutant Formation POLLUTANT FORMATION

Fraction Distillation of Crude Oil

Automobiles. Introductory Question. 6 Questions about Automobiles. Observations about Automobiles. Question 1. Heat Engines

V25 THE GREEN FUEL TREATMENT

Focus on Training Section: Unit 2

CHAPTER 1 INTRODUCTION

Emission Reduction Technologies towards zero emissions

Potential of Large Output Power, High Thermal Efficiency, Near-zero NOx Emission, Supercharged, Lean-burn, Hydrogen-fuelled, Direct Injection Engines

EXPERIMENTAL INVESTIGATION OF THE EFFECT OF HYDROGEN BLENDING ON THE CONCENTRATION OF POLLUTANTS EMITTED FROM A FOUR STROKE DIESEL ENGINE

STATE OF THE ART OF PLASMATRON FUEL REFORMERS FOR HOMOGENEOUS CHARGE COMPRESSION IGNITION ENGINES

The table below gives information about milk bottles. Raw materials Sand, limestone, salt Crude oil. Bottle material Soda-lime glass HD poly(ethene)

CH 6. S.S.E.R. Ltd. Registered in England & Wales. Company Registration No

Question: Automobiles. Observations About Automobiles. Heat Engines. Heat Pumps. Question:

Internal Combustion Engines

Lubricative Performance Enhancer By Nano Technology

3.2 The alkanes. Isomerism: Alkanes with 4 or more carbons show a type of structural isomerism called chain isomerism

Oil & Gas. From exploration to distribution. Week 3 V19 Refining Processes (Part 1) Jean-Luc Monsavoir. W3V19 - Refining Processes1 p.

Topic 1.6 PETROLEUM AND ALKANES. Fractional Distillation Cracking Combustion

E-power car matcher What is E-power How it use? European Conformity E-MARK 1, Research and development foundation Working principle

CSR Report Environmental Performance

PERFORMANCE AND EMISSION ANALYSIS OF DIESEL ENGINE BY INJECTING DIETHYL ETHER WITH AND WITHOUT EGR USING DPF

Internal Combustion Engines

Comprehensive Review of Three way Catalytic Converter

Basic Requirements. ICE Fuel Metering. Mixture Quality Requirements. Requirements for Metering & Mixing

EVERY ALTERNATIVE ISLG Combustion Air and Emission Devices. Why Cooled EGR? 4/23/2013. Why Exhaust Gas Recirculation.

Q1.This question is about the temperature of the Earth s atmosphere. Give one reason why it is difficult to produce models for future climate change.

The Prime Glass DeNOx solutions in the present scenario of the glass industry NOx containment technologies

Alkylate. Alkylate petrol has been used in many years as an environmentally and healthy adjusted fuel for forest workers and other. WHY?

Commercial Grade Industrial Strength Pure Concentrate, No Filler

C1.4 CRUDE OIL AND FUELS / C1.5 PRODUCTS FROM OIL

Design and Development of Micro Controller Based Automatic Engine Cooling System

1 The diagram shows the separation of petroleum into fractions. gasoline. petroleum Z. bitumen. What could X, Y and Z represent?

IMPROVING YOUR CAR S GAS MILEAGE. Page 2

Part No oz. (946 ml) bottle 11 oz. (325 ml) can

1 In all circumstances, it can be easily ignited by the spark. 2 The maximum possible amount of chemical energy can be

PRINCIPLES OF COMBUSTION

Stoichiometry and Pollution Control

GASOLINE DIRECT INJECTION IN SI ENGINES B. PAVAN VISWANADH P. ASHOK KUMAR. Mobile No : Mobile No:

DEPENDENCE OF THE TOXIC COMPONENTS EXHAUST EMISSION FROM THE CAR ENGINE STARTING TEMPERATURE

Thermal Stress Analysis of Diesel Engine Piston

The Role of Fuel Additives

An Experimental Analysis of IC Engine by using Hydrogen Blend

Greenhouse gases affect the temperature of the Earth. Which gas is a greenhouse gas? Tick one box. Argon Methane Nitrogen Oxygen

DOT Tire Quality Grading (U.S. Cars)

IN CYLINDER PRESSURE MEASUREMENT AND COMBUSTION ANALYSIS OF A CNG FUELLED SI ENGINE TESTING

This engine is certified to operate on regular 87 octane unleaded fuel (R+M)/2 Idle Speed (in gear): 650 RPM. Timing: Idle: 4-8 ATDC WOT:28 BTDC

Normal vs Abnormal Combustion in SI engine. SI Combustion. Turbulent Combustion

Potential of Modern Internal Combustion Engines Review of Recent trends

Module8:Engine Fuels and Their Effects on Emissions Lecture 36:Hydrocarbon Fuels and Quality Requirements FUELS AND EFFECTS ON ENGINE EMISSIONS

Combustion Equipment. Combustion equipment for. Solid fuels Liquid fuels Gaseous fuels

General Guide of Lubricants Recycle

Distillation process of Crude oil

8.21 The Physics of Energy Fall 2009

Name Date. True-False. Multiple Choice

EXPERIMENTAL INVESTIGATION ON 4 STROKE SINGLE CYLINDER DIESEL ENGINE BLENDED WITH TYRE OIL

PRODUCT INFORMATION SHEET

Chapter 4 ANALYTICAL WORK: COMBUSTION MODELING

Your energy solutions to reduce pollution and fuel consumption ENG v1.2

Railway Lubrication & Fuel Technology

5. Combustion of liquid fuels. 5.1 Atomization of fuel

THE ULTIMATE CHOICE. Engine Cleaning System Fuel Economy System. What is Τ2

ENVIRONMENT. The Diesel Engine and the Environment

Physical Properties of Alkanes

ENGINE TECHNOLOGY. Bobcat Engine_B _ _EN_reworked.indd 1

VALVE TIMING DIAGRAM FOR SI ENGINE VALVE TIMING DIAGRAM FOR CI ENGINE

Experimental investigation of ethanol-gasoline dual-fuel on particle emissions at the exhaust of a small displacement engine

Module 2:Genesis and Mechanism of Formation of Engine Emissions Lecture 9:Mechanisms of HC Formation in SI Engines... contd.

THE FOURTH STATE. Gaining a universal insight into the diagnosis of automotive ignition systems. By: Bernie Thompson

Unit 1. Naphtha Catalytic Reforming. Assistant lecturers Belinskaya Nataliya Sergeevna Kirgina Maria Vladimirovna

1. CAUTIONS. 1) Standard pattern of soot accumulation Normal Soot Combustion. Abnormal Soot Accumulation

Exhaust System - 2.2L Diesel

How does Common Rail Injection work?

Internal Combustion Engines

THE ULTIMATE CHOICE. Engine Cleaning System Fuel Economy System. What is Τ2

Powertrain Efficiency Technologies. Turbochargers

Study on the performance and emissions of a compression ignition engine fuelled with dimethyl ether

Improving car environmental and operational characteristics using a multifunctional fuel additive

THE THERMAL BEHAVIOR OF THE COAL-WATER- FUEL (CWF)

Development of In-Line Coldstart Emission Adsorber System (CSEAS) for Reducing Cold Start Emissions in 2 Stroke SI Engine

AN ANALYSIS OF SMOKE EMISSIONS FROM A RAPE BIOFUEL FED TRACTOR ENGINE. Jacek Wasilewski

Rocketry and Spaceflight Teleclass Webinar!

Expert Group on Maritime Policy

Honda. Helping our environment.

SUCCESSFUL DIESEL COLD START THROUGH PROPER PILOT INJECTION PARAMETERS SELECTION. Aleksey Marchuk, Georgiy Kuharenok, Aleksandr Petruchenko

Prediction of Physical Properties and Cetane Number of Diesel Fuels and the Effect of Aromatic Hydrocarbons on These Entities

FUEL OIL BURNERS. By Mark Butterfield March 09

New Direct Fuel Injection Engine Control Systems for Meeting Future Fuel Economy Requirements and Emission Standards

Transcription:

Make a great improvement of Engine fuel efficiency OIL GRACE 2 Explanation K C K CO., Ltd.

1. Introduction Automotive service industries as follows are conducting the study of energy saving and less pollution emission to solve environmental problems and other global issues, then many are in practical use now. (A) Automobile Manufactures are trying to develop various mechanisms such as CVCC, GDI and all how well burning a mixture of the air and fuel in engines. (B) Oil manufactures are constantly making effort to study to decrease the frictional resistance of engine oil more, which enables them to keep selling as energy-saving oils in market. As a result of these effects by the automobile related industries, wonderful outcomes create for the present. However, the efficiency of combustion of fuel (droplet ignition) in these engines has limitations as long as the rate of Oxygen in the atmosphere is 21%. On the other hand, the development of friction reducer and adjustment of viscosity in these oils has also limitations due to the difficulty of the processing accuracy enhancement of the engines. In this way, these conventional technology skills have so far been limited, thus they are trying to improve the technology in the way of combination of electric and battery in electric, hybrid car and all. Despite considerable research as above, the ways of 2 items noted below are that no one else has ever been thought and studied. (1) You have to take advantage of the Oxygen in the atmosphere by turning into highly-reactive and highly-combustible feature (not to take in more air like a supercharger) in combustion. (2) You have to take advantage of the enhancing of conformation of oil molecule to harden the oil film strength and restrain the metal from contact and reduce the dynamic viscosity at a time in engine oil. If you could achieve the challenging goal above mentioned (1, 2) in the existing internal-combustion engine, it makes a major breakthrough in this field. Now a product called Oil Grace 2 is developed under a new technology to solve these problems which product is completely free from the traditional technology.

Oil Grace 2 is made from natural materials which is harmless to humans and is ultra-microparticulated through the equipment that is developed by our own company. All you have to do is to put Oil Grace 2 into engine oil as additive for your engine and the combustion performance is promoted because it conducts to more efficient burning of Oxygen by the increased number of its electron spin. Almost complete engine combustion (gas, gasoline and diesel oil) is achieved. Therefore it helps to solve the problems; fuel economy, gas emissions and acceleration that have been currently required for any vehicles. Moreover, by its functions in the oil, Oil Grace 2 upgrades the oil film strength by not only the activation of engine oil molecule electron and the enhancement of its steric constitution but also the decrease in its dynamic viscosity, viscosity resistance and idling engine speed, thus reduces the engine noise. Then, it is expected more effective in driving; keeping low-temperature startability and qualities and long of engine oil, torque-speed characteristic improvement and acceleration power up especially in going uphill and passing.

2. Functional mechanism All internal combustion engine of gasoline engine vehicle and engine generator is an engine where the combustion of a fuel (gasoline and diesel oil) occurs with Oxygen molecule in the atmosphere in a combustion chamber to convert the heat energy into mechanical energy, which is obtained from the combustion of the fuel by the conversion of Carbon Hydrocarbon and Hydrogen molecule in a state of finely-divided atomic element. When you put Oil Grace 2 in engine oil as additive, it can improve combustion quality and reduce fuel use because of that the covalent bond energy of Carbon Hydrogen molecule is declined and activation energy of combustion reaction is decreased, and thus are increasing the heat quantity by the acceleration of miniaturization of generated particle moving more vigorous in the reaction after uptake into combustion system such as engine combustion chamber and all. This is the function of Oil Grace 2 it brought into being a tremendous energy-saving effect.

3. The function of Oil Grace 2 as an additive to improve the gas mileage The combustion of gasoline or diesel oil (Hydrocarbon compound) occurs with Oxygen in the atmosphere inside an engine to move the vehicle by using thermal energy generation. The equation describing combustion reaction is as follows. Hydrocarbon compound Heat energy H H Oxygen Molecule Carbon Dioxide Water H C C C H + O = O O = C = O + H O H + Kcal H H A combustion reaction occurs by scission of bonds of Hydrocarbon compounds or Oxygen molecules in the state of atom. H H H C C C H O = O O H H High amount of heat energy is needed when the combustion reaction is occurred as a process by which molecular bond is cut and transformed into atomic state. A wave nature energy radiating from Oil Grace 2 is acted in the direction of the cut of bonds in the combustion reaction, thus the necessary quantity of heat energy is decreased and which energy is used in the engine performance and the necessary quantity of fuel is decreased in accordance with the effectiveness.

4. Effects and Features 1 It realizes 10-40% in fuel oil saving, the lower combustion efficiency engines (old cars), the more efficiency. 2 You can immediately sense the acceleration power and torque after use on a hill or passing lane in particular. 3 It cuts down on the amount of exhaust with less smoke all along with the clean burning. 4 It runs more than twice without a change of engine oil, but it is needed to keep the right amount of the oil in the engine. 5 It deadens the engine noise and vibration. 6 The car s air conditioner is turned into good condition because the engine is being high-powered.

5. Intended end-usage All of the internal-combustion engine with engine oil can be used. 6. All-too-common question Q. Why is it turns engines into good condition?

A. Combustion is the sequence of exothermic chemical reactions between a fuel and an oxidant accompanied by the production of heat and conversion of chemical species, and giving reduction energy is needed to control the oxidation. The optimum velocity, temperature and pressure for the engine getting the best effect by control of the oxidation reaction, it can be, as a result, improved its fuel efficiency and reduced its development of oxidized substance in the exhaust gas at the same instant. Q. What are the contents? A. It is made of several ingredients consisted mainly of microelement, plant, seafood and all which is good to eat. (Environmentally-friendly product) Which ingredients is formed as ultra-microparticulated-size particle by 0.3-1.0μ. Q. Any other question? A. It helps prolong the change of engine oil due to the increase in the oil life. Currently, the rise in crude oil prices worldwide also affects in all areas. We hope that our new product Oil Grace 2 could be one of the cost-cutting measures.