VAN DEN Machine building PV15 RPR (Rail Piling Rig)
VAN DEN w w w.v dh e u v e lw e r k e n d a m.n l PV15-RPR, rail piling rig The PV15-RPR is a multifunctional compact pile driver, designed for pile driving up and around the track. The undercarriage is suitable for driving on the track by its hydraulic rail boogies. However, it is also possible to use this machine next to the track or in other areas. Characteristic is its compactness. The machine sits completely within the track profile, so that at any time both work and train traffic on the adjacent track can be continued. The machine is based on a 22 tons short radius tracked excavator and equipped with a 2.5 ton block weight Junttan type hydraulic hammer that has a maximum drop height of 800 mm and a total weight of 5 tons. Piles up to 7.5 meters can be used. The machine can also be made suitable for drilling. The PV15 is standard available the original colour of the used basis machine. Other colours are optional. The machine is built according to the guidelines of the NVAF and BS EN 996. Van den Heuvel specializes in custom made projects. It is always possible to adjust machines according to your requirements. Our sales team can advise you about the possibilities.
VAN DEN Dimensions machine in tunnel 7580 7040 12300 Basic data MACHINE SPECIFICATIONS 22 tons short radius tracked excavator Engine Tier-3A Approx. 160 hp Cabin equipped with Air condition Specifications depending on chosen basic machine PUMPS 2 variable delivery axial piston pumps Max. flow 2 x 220 l/min / Max. operating pressure 378 bar Pilot circuit gear type pump 20 l/min / 50 bar Extra pump 44 l/min / 230 bar BOOGIES Driven side fixed boogie with 4 hydraulic motors Pivoting boogie with pivot locking Maximum load per wheel 10 ton Maximum load per axle 20 ton Pull bar with connection Ø40mm, max. speed 25 km/h, max. towing speed 16 km/h UPPER CARRIAGE Max rear diameter from centre: 1750 mm UNDER CARRIAGE Traction force is sufficient and will not be increased TRANSPORT Max. height on tracks 3.550 mm Length 7,0 meter Approx. base machine weight: 30.000 kg Approx. hammer weight: 5.700 kg Extra counterweight 7.750 kg Approx. total weight: 44.000 kg
VAN DEN LEADER Telescopic leader (3 pieces) Horizontal slide 850 mm Centre pile to centre machine min 2900 mm & max 3750 mm Maximum pile length 7.5 meter Maximum pile weight vertical: 2580 kg 2 lifting cylinders to bring the pile under the hammer WINCHES Main winch 5,0 ton. (3e layer) Auxiliary winch 3,0 ton. (4e layer) HAMMER VDH 2.5 Max. energy 19,62 knm Hydraulic rotating drive cap (optional) DRIVE CAPS BI/ BII/ BIII Pile dimensions square 25x25 / 30x30 / 40x40 Including CE declaration of conformity Hydraulic and electric diagrams Painting company colour basis machine (other colours optional) Triple grouser with 8 cm filled and angled edges An operator manual in English language Automatic lubrication system Spare parts: One complete hammer cylinder (HHK2,5AL-800) Standard tools from the basic machine Complete set of filters for the basic machine Tools for the hammer One cushion Optional Hydraulic Rotary Head : KLEMM KH16 hydraulic system for rotary head is available Suitable for : Max. torque : Swan neck diameter : Measuring system : CFA and Pre-drilling 15.200 Nm 102 mm Kinetic Energy measuring System BREM-Ekal
VAN DEN Transport dimensions
VAN DEN w w w.v dh e u v e lw e r k e n d a m.n l VAN DEN HANDEL & TECHNIEK B.V. VAN DEN METAALWERK B.V. VAN DEN REPARATIE & REVISIE B.V. Van den Heuvel is a versa le company. We repair and maintain your equipment, but we are also an expert in the construc on or renova on of machinery or a achments, from sketch to end product. Whether it comes to electrical, mechanical or hydraulic systems, we are all-round. We are ac ve in many sectors, under which civil engineering, handling & recycling, agriculture and also the construc on sector (both piling and construc on equipment). We turn your idea or desire into a high quality final product. Our engineers develop a thoroughly design and provide the needed 3D-drawings, capacity determina ons and strength calcula ons. We have a metal and a hydraulic workshop available, both fully and well equipped, where the machines and a achments are assembled, hydraulic adjusted, compiled and preserved. And to ensure that your equipment remains opera onal, you can always contact our service department. Besides repairs, new built, rebuilt and service ac vi es, we are also importer of new piling equipment. We supply the Finnish top brand Jun an: innova ve techniques for special circumstances. In short, Van den Heuvel provides a total package: ac vi es for both new and used machinery, from engineering and manufacturing to support of your machinery.
VAN DEN VAN DEN HANDEL & TECHNIEK B.V. VAN DEN METAALWERK B.V. VAN DEN REPARATIE & REVISIE B.V. P.O. box 69 4250 DB Werkendam The Netherlands Hulsenboschstraat 2 4251 LR Werkendam The Netherlands T : +31 (0)183-502655 F : +31 (0)183-507050 E : info@vdheuvelwerkendam.nl sales@vdheuvelwerkendam.nl I :
Your nearest distributor: VAN DEN T +31 (0)183 502655 - info@vdheuvelwerkendam.nl