One-touch Mini : Metric Size Connecting : M3, M5, R1/8 Outside diameter reduced y 0% (Compared with series KQ), allowing piping in a narrower space. Thread sealant as standard. For application requiring copper-free material. (Electroless nickel plating) Compatile with vacuum to 100 kpa of pressure. ø tuing type is newly added. KJ ø KJ ø, ø, ø material Note1) O.D. Note 1) ø is availale in polyurethane only. Specifications Fluid Max. operating pressure Operating vacuum pressure Proof pressure Amient and fluid temperature Thread Thread lael (Standard) For application requiring copper-free material (Standard) Chuck Packing Gasket Guide to nylon and polyurethane. Large retaining force. Secure engagement and large retaining force with chuck. Compatile with low vacuum to 1.0 MPa of pressure. The special shape ensures sealing and reduces resistance of tuing insertion. Mounting Nut Guide 1 Air, Water Note1) 1.0 MPa 100 kpa 3.0 MPa 5 to 0 C, In case of water: 0 to 0 C (No freezing) JIS B003 (Taper for piping) JIS B009, Class (Metric coarse ) Stud Nylon, Soft nylon, Polyurethane ø, ø, ø, ø JIS B011, Class (Metric fine ) With sealant Brass parts are all electroless nickel plated. Note 1) to general industrial water. Consult SMC if using for other fluids. Surge pressure must e under the maximum operating pressure. O-ring Release ush (Light grey) Requires little force for removal. Releases the chuck to remove the tuing. Prevents the chuck from iting too deeply into the tuing. removal is easier. Body (White) Enales piping in a narrower space. Body and can e rotated (For positioning). Electroless nickel plated. R1/8 with sealant. PAT. Refer to Best Pneumatics 00 Vol.15 for the inch size. 5
One-touch Mini Male connector Female hole Straight union Plug-in elow One-touch fittings KQ /KQ KJ KS /KX KJS Hexagon socket head male connector KJE Bulkhead union Union elow KJR Reducer Reducer elow KC KM KB Male elow Union tee Plug-in "Y" KDM DM DMK KJW Extended male elow Union "Y" KJX Reducer union plug-in "Y" KQG KG Male ranch tee KJY Male run tee Different dia. straight Different dia. tee KJF Female connector Male KP KPQ /KPG KA Branch "Y" Different dia. union "Y" KJP Plug KR KRM KK KKH KKA KF KFG H,DL, L,LL M MS LQ1 /LQ
Female hole Male Connector Most coon style used to pipe from female in the same direction. Hexagon Socket Head Male Connector Connecting 0-M3 3-M3 0-M3 0 The hexagon socket in the ody is used to tighten the socket head male connector with a hexagon wrench. Useful in a confined space. Male Elow KJS KJS0-M3 KJS3-M3 KJS0-M3 KJS0 Most coon style used to pipe from female at a right angle. Branch "Y" To ranch a tuing in the same direction. <M5> Connecting Connecting Connecting 0-M3 3-M3 0-M3 0 3 0 0 Extended Male Elow KJW Basically used in the same way as a male elow. But also used in 3 dimensional piping to prevent interference of fittings. Male Branch Tee KJW0-M3 KJW3-M3 KJW0-M3 KJW0 To ranch the line from the female at 90 in each direction. Male Run Tee Connecting 0-M3 3-M3 0-M3 0 KJY To ranch the line from the female in the same direction and at 90. Connecting Connecting KJY0-M3 KJY3-M3 KJY0-M3 KJY0 7
Straight Union Different Dia. Straight KQ /KQ To connect tuing in the same direction. To connect tuing of different diameters. KJ 0-00 3-00 0-00 0-00 a a 0-3 -0 3-0 -0 0-0 KS /KX KC KM Bulkhead Union To connect tuing through a panel. KJE KJE0-00 KJE3-00 KJE0-00 KJE0-00 Different Dia. Tee To ranch the tuing into two at a right angle and reduce the resulting ranches in size. - a a 3-0 0-0 KB KDM DM DMK KQG KG Union Elow To connect tuing at right angles to each other. Union Tee 3-00 0-00 0-00 To ranch tuing into directions each at 90 to the original one. 0-00 3-00 0-00 0-00 - a Different Dia. Union "Y" To ranch tuing into smaller tuing in the same direction as the original one. Union "Y" a To ranch tuing in the same direction. 0-3 -0 3-0 0-0 0-00 3-00 0-00 0-00 KP KPQ /KPG KA KR KRM KK KKH KKA KF KFG H,DL, L,LL M 8 MS LQ1 /LQ
One-touch Plug-in Elow To change the tuing direction from a one-touch fitting y 90. Plug-in "Y" To ranch the line from a one-touch fitting into tuing in the same direction. Aplicale 3-99 0-99 0-99 3-99 0-99 0-99 Plug-in Reducer To connect to a smaller one-touch fitting. Aplicale KJR KJR0-0 KJR3-0 -0 KJR0-0 Reducer Union Plug-in "Y" KJX To ranch the line from a one-touch fitting into smaller diameter in the same direction. KJX3-0 KJX0-0 Reducer Elow To change the tuing direction from a one-touch fitting y 90 as well as to connect to a tuing of a smaller diameter. 3-0 -0 0-0 Plug To plug unused One-touch fittings. KJP KJP-0 Male Female Connector KJF To pipe from the male ed portion of a pressure gauge, etc. Connecting M3 X 0.5 M5 X 0.8 M3 X 0.5 M5 X 0.8 M5 X 0.8 KJF3-M3 KJF0-M3 KJF0 9
One-touch Mini Made to Order Seal, O-ring: Fluororesin Coating Oil Free: No Lurication (Example) 0-X17 No Lurication (Example) 0-X57 X17 X57 Made to Order Luricant: Vaseline (Example) 0-X1 X1 Clean Series Luricant: Fluororesin grease Release utton: White Doule packaging (Example) 10-0 10- KQ /KQ KJ KS /KX KC KM KB KDM DM DMK KQG KG KP KPQ /KPG KA KR KRM KK KKH KKA KF KFG H,DL, L,LL M MS 30 LQ1 /LQ