Digital Catalog Click here to display the contents. Click here to download the PDF file. Operation can be made from the toolbar at the center of the lower portion of the screen.
O-ring O-ring Retainer Spring One-touch fitting (built-in self-seal mechanism) to prevent air exhaust when removing tube. Best for multiple use areas when pressure cannot be shut down. styles are available. Electroless nickel plated for copper-free applications. Sealant is standard. Self-seal Fittings Series KC Before insertion of Valve Built-in self-seal mechanism ir does not exhaust after removal of. Body(Black) Stopper Cushion Stud Effective when piping in a confined space. he body and the threaded portion can rotate. (o the degree for positioning) With electroless nickel plated With thread sealant ubing Specifications Release button(blue) Guide Collet Chuck ubing material ubing O.D. Fluid aximum operating pressure Proof pressure mbient and fluid temperature ounting section hread Nut section Seal on the threads (Standard) Copper-free (Standard) Principal Parts aterial Body Stud Chuck, Spring Guide Collet, Release button Valve, Retainer Stopper Seal, O-ring Gasket fter insertion of ube Nylon, Soft nylon, Polyurethane ø, ø, ø, ø, ø ir 1 Pa 3 Pa 5 to 0 C (No freezing) JIS B 0203 (aper thread for piping) JIS B 0205 (etric fine thread) JIS B 0205 (etric fine thread) With thread seal Brass parts are all electroless nickel plated C30, PB C30 (hread portion) Stainless steel 30 Stainless steel 30, PB PO PO C30, PO NBR Stainless steel 30, NBR RoHS KQ2 KQB2 KS KX K KF H/D / KC KK KK130 D KD KB KR K KQG2 KG KFG2 S KK KP Q QR 11
Series KC odel ale connector KCH P. 13 Use to pipe in the same direction from female thread. Straight union KCH P. Use to connect tubes in the same direction. One of two ports has a self-seal function. ale elbow KC P. 13 Use to pipe at right angles to female thread. Straight plug for frequent use KCH P. It can save tube cutting labor in the case of frequent tube installation and removal. Use to connect a selfseal fitting and a tube in the same dierection. Union tee KC P. 13 Use to connect tubes in both 90 directions. Elbow plug for frequent use KC P. It can save tube cutting labor in the case of frequent tube installation and removal. Use to connect a self-seal fitting and a tube at the right angles to a self-seal fitting. Union Y KCU P. 1 Use to branch line in the same direction. 2 branched ports has a self-seal function. Check adaptor KCJ P. 1 Use to add the selfseal mechanism to the usual One-touch fittings, Series KQ. Bulkhead union KCE P. 1 Use to connect tubes through a panel. One of two ports has a self-seal function. Bulkhead connector KCE P. 1 Use to connect male thead and tube through a panel. 12
Self-seal Fittings Series KC ale Connector: KCH <5> <R> ale Elbow: KC Union ee: KC Connection thread R 5 x 0. 1 5 x 0. 1 1 1 1 3 1 3 3 1 2 Connection thread R 5 x 0. 1 5 x 0. 1 1 1 1 3 1 3 3 1 2 odel KCH0-5 KCH0-01S KCH0-5 KCH0-01S KCH0-02S KCH0-01S KCH0-02S KCH0-03S KCH-02S KCH-03S KCH-03S KCH-0S odel KC0-5 KC0-01S KC0-5 KC0-01S KC0-02S KC0-01S KC0-02S KC0-03S KC-02S KC-03S KC-03S KC-0S odel KC0-00 KC0-00 KC0-00 KC-00 KC-00 H (width 1 across flats) 1 1.. 1.5 H (width across flats) 9. 30. 27.3 2.1 2.1 1 2.1.1 2. 2. 11. 32. 2.9.5 2. 2. 37. 33. 1.. 1 2.9.9 1 2. 3. 20 1 5.7 39.7.5 1.2 13.1 27 3 27.5 25 50.5.5 3 25. 20. 51.5 5 3 5.2 7.7 35. 30. 1. 33. 1 Reference dimensions after R thread installation. 2 1 2 1.7 1.. 25.3 1.1.2 2.. 20.3.5..2 27.5 2 2. 29.5 1 2.2 3.1 30. 30 30.7 32.7.5 3.2 1.5 3 33. 37.2 3. 3.7 39.2.3 0.7 2.3 5.7 2. 32.7 39.2 5.5 9.2 Q 5.3.1 7.1 7.9. 1.5 2. 2. 7. 7. 13.7 11.1.1.0 2.3.3 1.9 1.9 2.3 2.3 11 2.2 2.2 7.2.2 13 13.0.5 1.5 1.5 37 29 3..3 3 1 39 52 <5> <R> Reference dimensions after R thread installation. 1: ax. diameter : ax. diameter Width across flats 5 x 0. Connection thread (With sealant) Connection thread (With sealant) 3 x applicable KQ2 KQB2 KS KX K KF H/D / KC KK KK130 D KD KB KR K KQG2 KG KFG2 S KK KP Q QR 13
Series KC Union Y : KCU odel KCU0-00 KCU0-00 KCU0-00 KCU-00 KCU-00.. 1.5 1 3.1 57. 5.2 70.1 2 27.3 31.2 3.9.9. P.. 1.5 Q..5 1.7.1.1 1 1.5 2 1 1.5 3.7 3.7.0.0.7.1 33.3 25..9 3.7 : ax. diameter 1 37 9 3 x applicable Check daptor: KCJ odel KCJ0-99 KCJ0-99 KCJ0-99 KCJ-99 KCJ-99 fitting size ød 9. 11. 1 9.5 5 1 70. 7. 33.5 37 2.5 9. 52. 1.5 Nylon Urethane 2. 2... 1.2 13.1 25. 20. 35. 30. : ax. diameter Connecting products with metal rods Products with metal rods cannot be connected to Series KQ2 One-touch fittings. If connected, the metal rod cannot be retained by the chuck of the One-touch fitting and products with metal rods may project during pressurization, causing serious personal injury or accident. 9 13 20 33 3 fitting size ød Bulkhead Union: KCE odel KCE0-00 KCE0-00 KCE0-00 KCE-00 KCE-00 () x 1 1 x 1 1 x 1 20 x 1 x 1 H (width across flats) ounting hole 1 2 13 27 5.5 52.5 59.5 3.2 1 1.5 2 1 2. 2... 1.5 1.2 13.1 25. 20. 35. 30. 30 39 1 ounting plate thickness 11 mm or less 2 x applicable Bulkhead Connector: KCE Connection thread Rc 1 1 3 3 3 odel KCE0-02 KCE0-02 KCE0-03 KCE-03 KCE-03 () x 1 1 x 1 1 x 1 20 x 1 x 1 H1 H2 (width (width across across flats) flats) 1 27 1 0.5 2.7 9. 53.9 5.1 2 1.7 1.7 1.2 13.7 ounting hole 13 1.5 2... 1.2 13.1 25. 20. 35. 30. 2. 32 3 2 79 5 Connection thread ounting plate thickness 7 mm or less 1
Self-seal Fittings Series KC Straight Union: KCH KCH0-00 KCH0-00 KCH0-00 KCH-00 KCH-00 Straight Plug for Frequent Use:KCH Elbow Plug for Frequent Use: KC odel odel KCH0-99 KCH0-99 KCH0-99 KCH-99 KCH-99 odel KC0-99 KC0-99 KC0-99 KC-99 KC-99.. 1.5 fitting size ød fitting size ød 2.1 5. 52. 59. 3.5 9. 11. 1 1 1 2.. 1.5 1 1.5 0. 3.1.7 52. 5.9 2 1 1.5 1 20 2.5 2.5 Nylon 2.. 1.2 25. 35. 2 3.3 3.5 0.3.3...1 25.2 2. 29. Urethane 2.. 13.1 20. 30. : ax. diameter..1 25.2 2. 29. 1 1.5 1 1.5 5 7 1 Nylon Urethane 5. 13.1. 2.1 1.0 1.5 29.5 5.3.1 : ax. diameter 5 11 1.2.2 11. 9.0. 1.9 35.2 25.0 50.2 39.7 1, 2: ax. diameter 7 25 30 2 x applicable fitting size ød fitting size ød KQ2 KQB2 KS KX K KF H/D / KC KK KK130 D KD KB KR K KQG2 KG KFG2 S KK KP Q QR
Series KC/ Specific Product Precautions Be sure to read before handling. Refer to front matter 5 for Safety Instructions and pages 13 to 1 for Fittings and ubing Precautions. No. of Insertions and Removals from Self-seal Fittings 1. he number of insertions and removals as a rough guide is as follows. ube 300 times etal stem 00 times Self-seal fittings that have once been attached to connecting plugs cannot be used for tube connection. It cannot be secured and the fittings will be lurched. Distinction of Plug and Fittings 1. he applicable fitting should be chosen depending on the style of plug. Check daptor How to use: Use it for addition of self-seal mechanism to a standard One-touch fitting. Self-seal fittings with check adaptor are not available. It causes air leakage. Installation of Self-seal Fittings 1. he fitting should be installed (installation of R thread portion) by screwing with a spanner at the hexagonal portion of the body. he position of spanner should be a root as close as possible to R thread. Hex. across flats may be deformed, if using an improper wrench for hex. across flats. ightening the hread Portion of an 5 Size Fittings 1. First, tighten it by hand, then give it an additional 1/ turn with the wrench. Excessive tightening may damage the threaded portion or deform the gasket to cause air leakage. Insufficient tightening may leave the thread loosened or cause air leakage. Elbow plug for frequent use KC -99 arking exclusive to self-seal fitting One-touch fitting Elbow plug for frequent use, straight plug for frequent use. How to use: For use in the case of frequent tube installation and removal, tube cutting labor can be saved. hese plugs cannot be connected to One-touch fittings other than self-seal fittings Series KC. If connected, the metal rod cannot be retained by the chuck of the One-touch fitting and elbow plug for frequent use/straight plug for frequent use may project during pressurization, causing serious personal injury or accident. Note the exclusive marking for self-seal fittings before use. arking Self-seal fitting Series KC Built-in self-seal mechanism Straight plug for frequent use KCH -99 2. Connecting products with metal rods Products with metal rods cannot be connected to Series KQ2 One-touch fittings. If connected, the metal rod cannot be retained by the chuck of the One-touch fitting and products with metal rods may project during pressurization, causing serious personal injury or accident. fter attaching products with attached metal rods, to the One-touch fitting, do not use tubes, resin plugs, or reducers, etc. his may cause releasing. For details about One-touch fittings that can connect KCJ model, contact SC. 1 ube Insertion and Removal under Pressurized Condition 1. When inserting/removing the is difficult under a pressurized condition, it should be inserted or removed by lowering the pressure or after fully exhausting.