MOVE TO ZERO Setting new standards for performance and reliability with near-zero emissions.
THE B6.7N. MOVE TO ZERO. Reliability and Performance with Low Emissions. The Cummins Westport B6.7N medium-duty natural gas engine offers ultra low emissions and reliable power for school bus fleets, shuttle bus, medium-duty truck and vocational vehicles. Next Generation Natural Gas Technology The B6.7N is certified to California Air Resources Board Optional Low NOx standard of 0.1 g/bhphr 50% fewer NOx emissions than current EPA regulations and meets 2017 EPA greenhouse gas (GHG) emissions requirements. Cummins Westport (CWI) natural gas engines have met the 2010 EPA standard for particulate matter (0.01 g/bhp-hr) since 2001. Cummins Westport natural gas engines feature spark-ignited stoichiometric combustion with cooled exhaust gas recirculation. They use a simple maintenance-free, Three-Way Catalyst (TWC) for consistent emissions control. Beginning in 2018, Cummins Westport natural gas engines include a new engine control module, on-board diagnostic (OBD) capability, an enhanced TWC, and a closed crankcase ventilation system. Natural gas is a low carbon, domestically abundant fuel source. All CWI engines offer customers the choice of using compressed natural gas (CNG), liquefied natural gas (LNG), or renewable natural gas (RNG) as a fuel. RNG is pipeline-quality natural gas produced from the decomposition of organic wastes, which can come from a variety of sources such as dairy farm waste, landfills, and urban waste treatment plants. Combining Cummins Westport ultra low emission engines with RNG fuel provides additional and significant GHG reductions. Learn more with the Cummins Westport GHG Emissions calculator at cwiplaybook.com.
Maintenance Maintenance Item^ Distance Hours Months Oil and Filter* 15,000 mi (24,000 km) 500 6 Spark Plugs 25,000 mi (40,000 km) 750 9 Spin-on Fuel Filter 30,000 mi (48,000 km) 1,000 12 Overhead Set Adjustment 45,000 mi (72,000 km) 1,500 18 Coolant System Drain 60,000 mi (96,000 km) 2,000 2 yrs Closed Crankcase Ventilation Filter 60,000 mi (96,000 km) 2,000 2 yrs Ignition Coil Extension 150,000 mi (240,000 km) 5,000 5 yrs Air Cleaner / Element Follow manufacturer s published recommendations Consult your Owners or Operation and Maintenance manual for the complete daily and routine maintenance schedule. ^Based on a duty cycle of 30 mph / 48 kph average speed. Distance intervals may decrease based on average speed. *Requires Natural Gas Engine Oil Torque Curves 800 Engine Torque (LB-FT) 750 700 650 600 550 500 450 400 350 B6.7N 200 / 520 B6.7N 220 / 520 B6.7N 240 / 560 300 600 800 1000 1200 1400 1600 1800 2000 2200 2400 2600 2800 Engine Speed (RPM)
B6.7N Ratings Truck Engine Model Advertised hp (kw) @ rpm Peak Torque lb-ft (N-m) @ rpm Governed Speed B6.7N 200 200 (149) @ 2400 520 (705) @ 1600 2630 rpm B6.7N 220 220 (164) @ 2400 520 (705) @ 1600 2630 rpm B6.7N 240 240 (179) @ 2400 560 (759) @ 1600 2600 rpm School Bus Engine Model Advertised hp (kw) @ rpm Peak Torque lb-ft (N-m) @ rpm Governed Speed B6.7N 200 200 (149) @ 2400 520 (705) @ 1600 2630 rpm B6.7N 220 220 (164) @ 2400 520 (705) @ 1600 2630 rpm B6.7N 240 240 (179) @ 2400 560 (759) @ 1600 2600 rpm Shuttle Bus Engine Model Advertised hp (kw) @ rpm Peak Torque lb-ft (N-m) @ rpm Governed Speed B6.7N 200 200 (149) @ 2400 520 (705) @ 1600 2630 rpm B6.7N 220 220 (164) @ 2400 520 (705) @ 1600 2630 rpm B6.7N 240 240 (179) @ 2400 560 (759) @ 1600 2600 rpm
Engine Features & Enhancements New Engine Control Module (ECM) The ECM provides full monitoring and control of the engine sensors, and the fuel and ignition systems. Cummins Westport 2018 engines feature a new ECM, Model CM2380, which offers faster processing to support heavy duty OBD requirements (500K baud rate). It is also telematics capable, and provides improved diagnostics and durability. On-Board Diagnostics (OBD) The OBD system continuously monitors the engine and after-treatment system. It gives the vehicle owner or repair technician electronic access to the status of various vehicle subsystems for diagnostic purposes. A Malfunction Indicator Lamp (MIL) is connected to the OBD system and is located on the vehicle s instrument panel. If the OBD system detects a malfunction related to the emissions control system, the MIL will come on and alert the operator. The engine will continue to operate normally until a diagnosis is made. Closed Crankcase Ventilation (CCV) system A CCV system reduces engine emissions by capturing crankcase emissions and rerouting these gases back to the engine. This results in more complete combustion and lower emissions. Enhanced Three-Way Catalyst (TWC) TWCs are effective, simple, passive devices. They provide consistent emissions control performance, are maintenance-free and can be mounted vertically or horizontally on the vehicle. Cummins Westport engines don t require active aftertreatment such as a diesel particulate filter or selective catalytic reduction. Control System Full drive-by-wire ECM provides full monitoring and control of engine sensors, fuel system and ignition system. Full interface capability to Cummins INSITE and diagnostic service tools. Electronic Features Road-speed governing Accelerator interlock SAE J1587/J1939 Power Take-Off (PTO) control Cruise control Engine protection system Wastegate Turbocharger Water-cooled bearing housing for durability, and electronic control for precise air handling. Specifications NOx Emission Maximum Horsepower Peak Torque Governed Speed Type Engine Displacement Number of Cylinders 6 Operating Cycles 4 0.1 g / bhp-hr. (50% below EPA) 240 HP 179 kw 560 LB-FT 759 Nm 2,630 RPM 4-cycle, spark-ignited, in-line 6-cylinder, turbocharged, CAC 409 CU IN 6.7 LITERS High-Energy Ignition System New ignition control module provides better performance and improved spark plug and coil durability, plus self-diagnostics. Net Weight (dry) Fuel Type Aftertreatment 1,150 lb 522 KG CNG / LNG / RNG Three-Way Catalyst
Base Warranty Cummins Westport engines feature the same factory base warranty coverage as Cummins diesel engines. This comprehensive warranty includes 2 years / unlimited miles or kilometers with full parts and labor coverage on warrantable failures. Standard coverage for the B6.7N in school bus applications is 5 years / 100,000 miles (160,935 km). Major components coverage is also available contact your local Cummins distributor or Cummins Westport representative for details. Extended Coverage Cummins Westport Inc. also offers a variety of extended coverage plans to meet every customer s need. For full extended coverage plan details, contact your local Cummins distributor or Cummins Westport representative. Cummins Westport The Natural Choice Cummins Westport Inc. designs, engineers and markets 6- to 12-liter spark-ignited natural gas engines for commercial transportation applications such as trucks and buses. Our natural gas engines are manufactured by Cummins, and are available from leading truck and bus manufacturers. Natural Gas Playbook To learn more about how to incorporate natural gas engines into your fleet, visit our Natural Gas Playbook website. We ll guide you through what you need to know to ensure successful implementation and operation of your natural gas engines. cwiplaybook.com Better Customer Care Cummins Westport-powered vehicles are supported by the Cummins service network, the largest and most capable in North America. Cumminsauthorized technicians are fully trained on Cummins Westport natural gas engines, with ready access to Cummins parts and warranty support. For questions regarding your Cummins Westport engine or for assistance in finding a repair facility in the United States or Canada, call Cummins Care at 1-800-CUMMINS (1-800-286-6467). Bulletin 5544077 Printed in U.S.A. 5/18 2018 Cummins Westport Inc. cumminswestport.com