ENTERPRISE 3000 BED with people in mind
3000 electric profiling hospital bed
Smart, safe The Enterprise 3000 electric profiling hospital bed offers first-rate features and a modern, stylish design at a very competitive price. it offers excellent benefits in key areas: Falls Prevention: An excellent low height of 38cm helps to reduce the risk of patient injury through falls, and facilitates patient transfers to and from the bed. Pressure Area Care: The patented profiling system gives better pressure reduction than standard profiling beds, which helps to reduce the risk of pressure ulcers. Infection Control: The bed has been designed to be easy to clean and decontaminate, which helps to reduce infection control rsiks. Moving and Handling: To cater for heavier patients, the bed has a safe working load of 230kg. This, combined with the fully electric operation, minimises the risk of injury to carers and helps to increase patient independence....and affordable
Integral Bed Extension With mattress retainer Easy to Clean Smooth surfaces, head/foot end panels and deck sheets are removable Manual CPR Release Dual sided for backrest
Improved risk management 1 2 2 Intelligent Profiling System On descent, the knee-break stays raised until the backrest is semi-flat (1). Both the backrest and knee-break then descend together until they reach a flat position simultaneously (2). This is unique on other beds the knee-break descends regardless of backrest angle, which can result in the client sliding down the bed. The intelligent profiling on the Enterprise 3000 bed maximises comfort and reduces pressure, shear and friction. This helps to reduce the risk of pressure ulcers. Pro-Contour Advance Profiling Enhanced Safety Conventional Beds Enterprise 3000 bed Pivot points Movements unique to Enterprise 3000 bed Compared to a conventional profiling bed (A), the Pro-Contour Advance Profiling on the Enterprise 3000 bed raises the pivot point of the backrest and thigh section closer to the client s natural pivot point (their hip joint) (B). It mimics the way a person s tissues stretch as they move from lying to sitting and reduces compression on the mattress surface at the seat section. This offers major benefits over conventional profiling beds: Enhanced pressure, shear and friction reduction Excellent postural support Exceptional comfort Exceptional Low Height The excellent low height of 38cm enhances the safety of both patients and carers. It allows easier downward transfers from wheelchairs, chairs etc. In addition, for patients who are at risk of falling and the use of safety sides is considered to be inappropriate, the bed can be left at its lowest height. Safe Working Load The safe working load of 230kg allows for the safe management of heavier patients, without the need to source specialist equipment.
Features Electrically operated backrest, knee-break, height adjustment Electrically operated Trendelenberg /Reverse Trendelenberg tilt Patient and nurse handsets with raised, embossed buttons Auto-Contour button Pro-Contour Advance profiling Intelligent profiling system Attendant control panel to lock out handset functions Battery back-up Retracting, rising backrest Ratchet calf section adjustment Dual-sided manual CPR levers for backrest Perforated removable dimple sheet mattress platform Removable moulded head and foot ends Technical Details Overall length 224cm (88 ) Overall length (extended) 237cm (93 1 /4 ) Overall width 102cm (40 ) Mattress size (length x width) 198 x 86cm (78 x 34 ) Height range 38 79cm (14 3 /4 31 ) Trendelenberg and Reverse Trendelenberg +12 / 8 Backrest angle (maximum) 70 Knee-break angle (maximum) 30 Safe working load 230kg (506lbs) Product weight without safety sides 113kg (249lbs) Electrical Details Dual sided integral drainage bag rails with hooks Power in 2A max at 230V a.c. 50/60 Hz Linked braking/steering system Electrical shock protection Class 1, Type B 150mm under-bed clearance for hoist access Linen shelf Integral bed extension with mattress retainer Liquid ingress protection Batteries IP54 2 x 12V series connected, rechargeable, lead/acid gel 1.2 amp hrs Moulded plastic base cover 125mm single-wheel castors 150mm single or twin-wheel castors () Integral folding safety sides () Standard () Optional Head/Foot Panel Infill Colour Options Light Blue White Lilac Green Beech Sea Blue Peach Mushroom Medical Beds Product Division 310-312 Dallow Road, Luton, Bedfordshire, LU1 1TD, United Kingdom T: +44 (0)1582 413104 F: +44 (0)1582 459100 E: sales.admin@huntleigh-healthcare.com Rental 24hr Helpline Lo-call T: 08457 342000 W: www.huntleigh.co.uk Registered No: 942245 England. Registered Office: As Above. Huntleigh Healthcare Limited 2008 MEMBER OF THE GETINGE GROUP with people in mind and are trademarks of Huntleigh Technology Limited As our policy is one of continuous improvement, we reserve the right to modify designs without prior notice. GENLIT 001/07 LIT 1131/01