J Cabinets In This Section Portable Hot Box J-1...237 ER-18 Enclosed Rack For Display J-2...239 Econoline Cabinets Aluminum For Storage J-3...241 Transport Cabinets J-4...243 Stackable Cabinets J-5...245 Heated Cabinet/Proofer Aluminum, Non-Insulated & Insulated J-6...247 Universal Heated Proofer Aluminum, Non-Insulated & Insulated J-7...249 Aluminum Tray Delivery Carts Steam Table Pans, Meal Trays, & Bun Pans J-8...251
Portable Hot Box Back View: Canned fuel access panel 1100 Shown with wire rack option. JOB ITEM # QTY # MODEL NUMBER 1100 1110 1120 The Original Piper Hot Box is the perfect food transporter and meal storage unit for keeping food at appetizing serving temperatures, especially in a situation when external power is not readily available. Fully insulated, it can be used with Canned Fuel for transport of hot food items, or with dry ice for delivering cold foods. It is also available in AC or DC powered versions for complete versatility. It is lightweight and easy to clean. Construction consists of a strong textured aluminum exterior and a smooth, easily cleaned aluminum interior. A heavy-duty aluminum frame is incorporated for exceptional strength and rigidity, yet it weighs only 25 lbs when empty. The Hot Box is fully insulated to ensure even temperatures. STANDARD FEATURES Holds Up To Six 16 Pizzas Available in AC, DC or Canned Fuel Models Keeps Temperatures Up To 205 Degrees* Fully insulated, double wall aluminum construction DIMENSIONS H 17-1/4 x W 20-3/4 x D 22-1/4 CONTINUOUS LINER Easily wiped clean No bothersome shelf brackets to hinder cleaning WIRE RACK (OPTIONAL) Holds up to six 16 pizzas Removes for easy clean STAINLESS STEEL DOOR LATCH Easy thumb-release action 16 Gauge stainless steel for extra durability Handle is reinforced with 14 gauge steel plate INSULATED DOORS Double perforated aluminum construction Continuous aluminum hinging Locks securely in place WAANTY One year parts and labor. Warranty is detailed on inside front cover of the price list. SPEC J-1 237
Portable Hot Box DEGREES FAHRENHEIT TEMPERATURE PROFILE 210 200 190 180 170 160 150 130 AC/Canned 120 DC 110 100 0 1 HR 2 HR 3 HR 4 HR 5 HR 6 HR Model# Description Height Width Depth Watts Amps Pre-Heat Time 1100 Canned fuel 17-1/4" 20-3/4" 22-1/4" 0 0 30-Min 1110 AC Powered 17-1/4" 20-3/4" 22-1/4" 200 1.7 45-Min 1120 DC Powered 17-1/4" 20-3/4" 22-1/4" 140 11.6 45-Min Interior Dimensions: 13-1/2" x 17-1/4" x 16-1/2" Cord length: 6 ft. Canned Fuel operation - Holds up to 205 degrees DC Powered 12 Volt operation - Holds up to 180 degrees AC Powered 115 Volt operation - Holds up to 180 degrees OPTION Wire Rack - holds up to six 16 pizzas at 2 inch spacing (300003) CANNED FUEL OPTION Rear panel opens to Canned fuel container Keeps heat source safely contained Holds one 6-hour burn containers which is enough for up to 3 uses for most occasions.* Maintains 180 to 205 degrees fahrenheit for optimum food pan temperatures. J-1 SPEC LIMITED WAANTY: piper products warrants to the original purchaser parts and labor for a period of twelve (12) months from the date of purchase. See manufacturer s complete warranty for details. It is our policy to build equipment which is design certified by companies that have been accredited at the Federal Level by the Occupational Safety and Health Agency (OSHA) and ANSI as a National Recognized Testing Laboratory. These companies include CSA International, Underwriters Laboratories, and the National Sanitation Foundation. However, a continuing program of product improvement makes it necessary to submit new models to the agencies as they are developed. Consequently, all models may not bear the appropriate labels at all times. We reserve the right to change specifications and product design without notice. Such revisions do not entitle buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment. Information is not for design purposes. 238
ER-18 Enclosed Rack For Display JOB ITEM # QTY # MODEL NUMBER ER-18-L ER-18-R ER-18-L Piper s Enclosed Rack offers a cooling rack for product coming out of the oven while providing merchandising to display product. Removable doors and tray glides allow for easy cleaning and maintenance. STANDARD FEATURES Includes wider spacing between glides to eliminate possibility of slicing tops of rolls when sliding pans in and out - 3-1/4 spacing Units will hold 18 of the 18 x 26 standard sheet pans or 36 of the 18 x 13 half size sheet pans Side glides and bottom are removable for ease of cleaning, simply lift up and out Magnetic closure adjustable for tight fitting door Sturdy framed doors provide strength and attractive clarity Adjustable vent at top of unit to relieve excess heat Four 5 heavy-duty non-marking swivel casters, front include brakes Removable doors lift off for easy access during busy times DIMENSIONS 70-1/4 H x 21-1/2 W x 28-3/4 D CAPACITY Eighteen, 18 x 26 sheet pans Thirty-six, 14 x 18 sheet pans CONSTRUCTION The cabinet frame shall be constructed of 1 x 1,.063, square tube aluminum. The cabinet wrapper shall be.063 PVC coated aluminum. There shall be four removable interior side racks constructed of aluminum tubing with.063, 1 x 1.5 angle glides welded on 3.25 spacing. Cabinet doors shall be constructed of clear coat anodized aluminum extrusion with lexan inserts. Cabinet shall have two separate compartments with removable doors and magnetic enclosures. Top compartment shall be vented. HEAVY-DUTY CASTERS 5" x 1-1/4" sealed wheel stem casters 350 lbs. capacity Maximum resistance to chemicals, acids, bases, alcohol, water and steam Maximum low temperature flexibility for superior performance, even in freezing temperatures WAANTY One year parts and labor. Warranty is detailed on inside front cover of the price list. SPEC J-2 239
ER-18 Enclosed Rack For Display Adjustable vent on top of unit vents heat and moisture The Piper ER-18 Enclosed Rack is designed to provide an attractive storage cabinet. Height Width Depth Door Width Exterior Dimensions 70-1/4 21-1/2 28-3/4 20-3/4 Interior Dimensions 61-1/2 18-1/2 24-1/2 3-1/4 spacing between glides Capacity is 18 standard 18 x 26 sheet pans Specify door hinge right or left. Shipping weight approximately 140 lbs. Shipping class: 125 Interior racks are easily removed for cleaning and maintenance J-2 SPEC LIMITED WAANTY: piper products warrants to the original purchaser parts and labor for a period of twelve (12) months from the date of purchase. See manufacturer s complete warranty for details. It is our policy to build equipment which is design certified by companies that have been accredited at the Federal Level by the Occupational Safety and Health Agency (OSHA) and ANSI as a National Recognized Testing Laboratory. These companies include CSA International, Underwriters Laboratories, and the National Sanitation Foundation. However, a continuing program of product improvement makes it necessary to submit new models to the agencies as they are developed. Consequently, all models may not bear the appropriate labels at all times. We reserve the right to change specifications and product design without notice. Such revisions do not entitle buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment. Information is not for design purposes. 240
Econoline Cabinets Aluminum For Storage JOB ITEM # QTY # MODEL NUMBER 540 540 PIPER S SUPERIOR FOUNDATION Featured on our toughest racks: Two 14 gauge aluminized steel reinforcing channels support our.090 thick aluminum bottom panel. The edges are formed and rolled to create a built-in bumper and heavy duty plate casters make this the strongest foundation in the industry. When work loads increase and you need more cabinets, Econoline Cabinets from Piper Products may be just the thing. Built to demanding Piper specifications, these cabinets provide most of the same great features found on our heavy-duty cabinets. Though constructed without some of the cosmetic enhancements and touches of our standard cabinets, the Econoline series still provides the service and reliability you ve come to expect from all Piper products. They are offered in three of our most popular sizes to work flawlessly along side your other equipment. STANDARD FEATURES Base is a solid bottom constructed of.090 aluminum, rolled edge acts as built in bumper Two 14-gauge aluminized steel reinforcing channels attach the casters and support the bottom panel Frame consist of four extruded channels 1-1/2 x 5/8 x.094 aluminum. Corners have.190 channel supports for reinforcement Single pan top constructed of one.080 thick aluminum panel, fully welded corners Glides are channels spaced on 1-1/2 centers with 5/8 ledge,.090 thick extruded aluminum continuously welded to the frame Door panel is.125 PVC coated aluminum attached to cabinet with bakery hinges, 270 degree door swing with card clip Back panel is.080 aluminum fully welded 1/2 extruded aluminum tie bar keeps cabinet square 16-gauge stainless steel positive gravity latch is provided to keep door closed during transport Stainless steel side door latch holds door open Card clip, easy identification of cabinet content when door is closed DIMENSIONS H68-1/4 x W21 x D27-3/8 HEAVY-DUTY CASTERS 5 diameter x 1/1/4 wide swivel sealed wheels, two with brakes 350 lb. capacity Maximum resistance to chemicals, acids, bases, alcohol, water and steam Maximum low temperature flexibility or superior performance even in freezing temperatures COMMON OPTIONS Wheel brakes Push handle Personalized embossment Corner of perimeter bumpers See reverse side for additional options WAANTY One year parts and labor. Warranty is detailed on inside front cover of the price list. SPEC J-3 241
Econoline Cabinets Aluminum For Storage Glides are channels spaced on 1-1/2 centers with 5/8 ledge Model# Description Height Width Depth Channel Spacing (in.) Pan Capacity Ship Wt. (lbs) 540 Cabinet 68-1/4" 21" 27-3/8" 1.5 40 136 *Rack capacities are for 18 x 26 sheet pans Height includes casters. Custom height sizes and glide spacing available. Typical freight class: 100 OPTIONS / ACCESSORIES R R (LD) Lexan full-view door R R (DD) Dutch door, only available on 941 units R R (CH) Chest handles, set of 2 R R (EMB) Personalized embossment, 12 letters per line R R (PH) Push handle R R (I) Insulating transport cabinet R R (B) Set of 4 non-marking rubber corner bumpers R R (PB) Full perimeter non-marking bumper R R (WB) Wheel brakes, set of 2 R R (5x2) Heavy-duty casters, set of 4 R R (CP) Correctional package, includes welded casters and hole in door latch for paddlelock R R (CHT-2) Canned heat tray insert R R (Y4) Polyurethane 4" casters (set of 4) R R (Y5) Polyurethane 5" casters (set of 4) R R (FL) Floor lock J-3 SPEC LIMITED WAANTY: piper products warrants to the original purchaser parts and labor for a period of twelve (12) months from the date of purchase. See manufacturer s complete warranty for details. It is our policy to build equipment which is design certified by companies that have been accredited at the Federal Level by the Occupational Safety and Health Agency (OSHA) and ANSI as a National Recognized Testing Laboratory. These companies include CSA International, Underwriters Laboratories, and the National Sanitation Foundation. However, a continuing program of product improvement makes it necessary to submit new models to the agencies as they are developed. Consequently, all models may not bear the appropriate labels at all times. We reserve the right to change specifications and product design without notice. Such revisions do not entitle buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment. Information is not for design purposes. 242
Transport Cabinets JOB ITEM # QTY # MODEL NUMBER 918 922 926 933 936 941 941-EX 941-HD 941 PIPER S SUPERIOR FOUNDATION Featured on our toughest racks: Two 14 gauge aluminized steel reinforcing channels support our.090 thick aluminum bottom panel. The edges are formed and rolled to create a built-in bumper and heavy duty plate casters make this the strongest foundation in the industry. Piper Transport Cabinets are built extra-strong to withstand the rigors of transporting bakery and food service products. A welded bottom ensures rigidity as well as permits forklift loading and unloading. Heavyduty plate casters promote easy mobility, and with many sizes to choose from, storage space will never be a problem. Model Differences Model 941 is the standard cabinet. This unit does not have U-Channels built into the back and door of the cabinet Model 941-EX is an extended depth cabinet with the same general construction as the standard 941 unit. THis unit does not have U-Channels built into the back and door of the cabinet. The 941-EX will hold 2, 14x18 trays per slide. Model 941-HD does have the U-Channels built into the back and door of the cabinet. It also has double tie bars and L braket corner supports at the top and bottom of the cabinet. This unit also has a louvered back panel. STANDARD FEATURES Base is a solid bottom constructed of.125 aluminum, rolled edge base acts as a built-in bumper Two 14-gauge aluminized steel reinforcing channels attach the casters and support the bottom panel Frame consist of four extruded channels 1-1/2 x 5/8 x.094 aluminum. Corners have.190 channel supports for reinforcement Double pan top constructed of two.080 thick aluminum panels, fully welded corners Glides are channels spaced on 1-1/2 centers with 5/8 ledge,.090 thick extruded aluminum continuously welded to the frame Door panel is.125 PVC coated aluminum attached to cabinet with bakery hinges, 270 degree door swing with card clip Back panel is.080 aluminum fully welded 1/2 extruded aluminum tie bar keeps cabinet square 16-gauge stainless steel positive gravity latch is provided to keep door closed during transport Stainless steel side door latch holds door open One inch insulation surround the cabinet (Insulated models only) Card clip, easy identification of cabinet content when door is closed 941-EX features 4 Tie bars (2 in front, 2 in back). 941-HD features heavy duty corner gussets on the top panel for extra support Dimensions 918-34-3/4 x 21 x 27-3/8 922-40-3/4 x 21 x 27-3/8 926-46-3/4 x 21 x 27-3/8 933-57-1/4 x 21 x 27-3/8 936-63-1/4 x 21 x 27-3/8 941-69-1/4 x 21 x 27-3/8 941-EX - 69-3/4 x 21 x 31 941-HD - 69-3/4 x 21 x 31 HEAVY-DUTY CASTERS 5 diameter x 1-1/4 wide swivel sealed wheels 350 lb. capacity Maximum resistance to chemicals, acids, bases, alcohol, water and steam Maximum low temperature flexibility or superior performance even in freezing temperatures COMMON OPTIONS Wheel brakes Push handle Chest handles Personalized embossment See reverse side for additional options WAANTY One year parts and labor. Warranty is detailed on inside front cover of the price list. SPEC J-4 243
Transport Cabinets Glides are channels spaced on 1-1/2 centers with 5/8 ledge 941 Model# Height Width Depth Channel Spacing (in.) *Pan Capacity Ship Wt. (lbs) 918 34-3/4 21 27-3/8 1-1/2 18 96 922 40-3/4 21 27-3/8 1-1/2 22 100 926 46-3/4 21 27-3/8 1-1/2 26 109 933 57-1/4 21 27-3/8 1-1/2 33 117 936 63-1/4 21 27-3/8 1-1/2 36 120 941 69-1/4 21 27-3/8 1-1/2 41 136 941-EX 69-3/4 21 31 1-1/2 41 148 941-HD 69-3/4 21 31 1-1/2 41 175 *Rack capacities are for 18 x 26 sheet pans Height includes casters. Custom height sizes and glide spacing available. Typical freight class: 175 OPTIONS / ACCESSORIES R R (LD) Lexan full-view door R R (DD) Dutch door, only available on 941 units R R (CH) Chest handles, set of 2 R R (EMB) Personalized embossment, 12 letters per line R R (PH) Push handle R R (I) Insulating transport cabinet R R (B) Set of 4 non-marking rubber corner bumpers R R (PB) Full perimeter non-marking bumper R R (WB) Wheel brakes, set of 2 R R (5x2) Heavy-duty casters, set of 4 R R (CP) Correctional package, includes welded casters and hole in door latch for paddlelock R R (CHT-2) Canned heat tray insert R R (Y4) Polyurethane 4" casters (set of 4) R R (Y5) Polyurethane 5" casters (set of 4) R R (FL) Floor lock J-4 SPEC LIMITED WAANTY: piper products warrants to the original purchaser parts and labor for a period of twelve (12) months from the date of purchase. See manufacturer s complete warranty for details. It is our policy to build equipment which is design certified by companies that have been accredited at the Federal Level by the Occupational Safety and Health Agency (OSHA) and ANSI as a National Recognized Testing Laboratory. These companies include CSA International, Underwriters Laboratories, and the National Sanitation Foundation. However, a continuing program of product improvement makes it necessary to submit new models to the agencies as they are developed. Consequently, all models may not bear the appropriate labels at all times. We reserve the right to change specifications and product design without notice. Such revisions do not entitle buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment. Information is not for design purposes. 244
Stackable Cabinets JOB ITEM # QTY # MODEL NUMBER 912 918 922 2-2128 (Dolly for 912) 2-Model 912 with optional Dolly (2-2128) and chest handle 922 912 Shown with optional chest handle PIPER S SUPERIOR FOUNDATION Featured on our toughest racks: Two 14 gauge aluminized steel reinforcing channels support our.090 thick aluminum bottom panel. The edges are formed and rolled to create a built-in bumper and heavy duty plate casters make this the strongest foundation in the industry. Piper Stackable Cabinets form a handy modular system that provides unmatched versatility, space efficiency and food management options. Easily stacked on top of each other, the cabinets unique design keeps them securely together. When used on a dolly, these cabinets offer the modular flexibility that allows you to segregate menu items, even hot and cold, for service or delivery. DIMENSIONS 912 H20-1/2 x W 21 x D27-3/8 918 H34-3/4 x W21 x D27-3/8 922 H40-3/4 x W21 x D27-3/8 2-2128 H7-3/4 x W21-3/4 x D28-3/8 HEAVY-DUTY CASTERS Casters standard on 918, 922, and 2-2128. 5 diameter x 1/1/4 wide swivel sealed wheels, two with brakes. 350 lb. capacity Maximum resistance to chemicals, acids, bases, alcohol, water and steam Maximum low temperature flexibility or superior performance even in freezing temperatures STANDARD FEATURES Base is a solid bottom constructed of.125 aluminum, option for full perimeter bumper Two 14-gauge aluminized steel reinforcing channels attach the casters and support the bottom panel (On 2-2128, 918, & 922 models) Frame consist of four extruded channels 1-1/2 x 5/8 x.094 aluminum. Corners have.190 channel supports for reinforcement Double pan top constructed of two.080 thick aluminum panels, fully welded corners Glides are channels spaced on 1-1/2 centers with 5/8 ledge,.090 thick extruded aluminum continuously welded to the frame Door panel is.125 PVC coated aluminum attached to cabinet with bakery hinges, 270 degree door swing Back panel is.080 aluminum fully welded 1/2 extruded aluminum tie bar keeps cabinet square 16-gauge stainless steel positive gravity latch is provided to keep door closed during transport Stainless steel side door latch holds door open One inch insulation surround the cabinet (Insulated models only) Card clip, easy indentification of cabinet content when door is closed COMMON OPTIONS Wheel brakes Push handle Corner or perimeter bumper Personalized embossment Canned heat tray insert See reverse side for additional options WAANTY One year parts and labor. Warranty is detailed on inside front cover of the price list. SPEC J-5 245
Stackable Cabinets Model# Description Height Width Depth Channel Spacing (in.) 12x26 Tray Capacity 912 Stackable Cabinet 20-1/2" 21" 27-3/8" 1.5 12 70 918 Cabinet 34-3/4" 21" 27-3/8" 1.5 18 96 Ship Wt. (lbs) 922 Cabinet 40-3/4" 21" 27-3/8" 1.5 22 100 2-2128 Tray Dolly 7-3/4" 21-3/4" 28-3/8" - - 25 Approximate 912 box dimensions: 35" x 23" x 29" Typical freight class: 175 OPTIONS / ACCESSORIES Part # Description 2-2128 Dolly CHT-2 Canned Heat Tray Insert -LD Lexan Full-View Door -DD Dutch Doors -CH Chest Handles -EMB Personalized Embossment -PH Push Handle -I Insulating Transport Cabinet -B Non-Marking Rubber Bumpers Corner (set of 4) -PB Full Perimeter -WB Wheel Brakes (set of 2) -5x2 Heavy-duty Casters (set of 4) -CP Correctional Package -Y4 Polyurethane 4" casters (set of 4) -Y5 Polyurethane 5" casters (set of 4) -FL Floor Lock -CHI Canned heat tray insert CANNED HEAT TRAY INSERT Preheats quickly and keeps a variety of products at peak temperature for hours. Maintains 190 to 205 degrees fahrenheit for optimum food temperature. Tray holds up to two 6-hour burn containers. Tray is designed to fit inside any of our standard cabinets by resting on the existing tray glides. Dutch doors not available on 912. J-5 SPEC LIMITED WAANTY: piper products warrants to the original purchaser parts and labor for a period of twelve (12) months from the date of purchase. See manufacturer s complete warranty for details. It is our policy to build equipment which is design certified by companies that have been accredited at the Federal Level by the Occupational Safety and Health Agency (OSHA) and ANSI as a National Recognized Testing Laboratory. These companies include CSA International, Underwriters Laboratories, and the National Sanitation Foundation. However, a continuing program of product improvement makes it necessary to submit new models to the agencies as they are developed. Consequently, all models may not bear the appropriate labels at all times. We reserve the right to change specifications and product design without notice. Such revisions do not entitle buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment. Information is not for design purposes. 246
Heated Cabinet/Proofer Aluminum, Non-Insulated & Insulated JOB ITEM # QTY # MODEL NUMBER 915-H 934-H 934-H-LD 1034-LD 1015 (Insulated) 1034 (Insulated) 934-H 915-H PIPER S SUPERIOR FOUNDATION Featured on our toughest racks: Two 14 gauge aluminized steel reinforcing channels support our.125 thick aluminum bottom panel. The edges are formed and rolled to create a built-in bumper andheavy duty plate casters make this the strongest foundation in the industry. Piper s aluminum Heated Cabinets /Proofers are designed with features to make your operation efficient. Controls can be easily accessed at the front of the Cabinet without opening the doors and the entire heater unit can be removed for cleaning and maintenance. STANDARD FEATURES Base is a solid bottom constructed of.125 aluminum, rolled edge base acts as a built-in bumper Two 14-gauge aluminized steel reinforcing channels attach the casters and support the bottom panel Frame consist of four extruded channels 1-1/2 x 5/8 x.094 aluminum. Corners have.190 channel supports for reinforcement Double pan top constructed of two.080 thick aluminum panels, fully welded corners Glides are channels spaced on 1-1/2 centers with 5/8 ledge,.090 thick extruded aluminum continuously welded to the frame Door panel is.125 PVC coated aluminum attached to cabinet with bakery hinges, 270 degree door swing with card clip Back panel is.080 aluminum fully welded with removable multiple louvered vent stack 1/2 extruded aluminum tie bar keeps cabinet square 16-gauge stainless steel positive gravity latch is provided to keep door closed during transport Stainless steel side door latch holds door open One inch insulation surround the cabinet (Insulated models only) Card clip, easy identification of cabinet content when door is closed Dimensions 915-H - 40-3/4 H x 21-1/2 W x 31 D 934-H - 68-3/4 H x 25W x 31 D 934-H-LD - 68-3/4 H x 21-1/2"W x 31 D 1034-LD - 68-3/4 H x 21-1/2 W x 31 D 1015 (Insulated) - 40-3/4 H x 21-1/2 W x 31 D 1034 (Insulated) - 68-3/4 H x 21-1/2 W x 31 D HEAT SYSTEM Individual heat and food moisture controls Digital read-out for accuracy Stainless steel 1 gallon water pan Unit removable for easy cleaning & maintenance 60 minute timer 120 volt, 12.5 AMP, 1500 Watts HEAVY-DUTY CASTERS 5 diameter x 1/1/4 wide swivel sealed wheels, two with brakes 350 lb. capacity Maximum resistance to chemicals, acids, bases, alcohol, water and steam Maximum low temperature flexibility or superior performance even in freezing temperatures COMMON OPTIONS Lexan full-view door Push handle Dutch doors Personalized embossment See reverse side for additional options WAANTY One year parts and labor. Warranty is detailed on inside front cover of the price list. SPEC J-6 247
Heated Cabinet/Proofer Aluminum, Non-Insulated & Insulated Glides are channels spaced on 1-1/2 centers with 5/8 ledge Shown with optional Bumper Glides Model # Description (A) Height Width Depth Channel Spacing 18x26 Pan Capacity Ship Wt.(lbs) NON-INSULATED 915-H half size 40-3/4 21-1/2 31 1-1/2 15 140 100 934-H full size 68-3/4 21-1/2 31 1-1/2 34 190 100 INSULATED 1015 half size 40-3/4 21-1/2 31 1-1/2 15 160 100 1034 full size 68-3/4 21-1/2 31 1-1/2 34 260 100 Shipping Class All models 120 volt, 12.5 APM, 1500 watts OPTIONS / ACCESSORIES R R (LD) Lexan full-view door R R (DD) Dutch door, only available on 941 units R R (CH) Chest handles, set of 2 R R (EMB) Personalized embossment, 12 letters per line R R (PH) Push handle R R (I) Insulating transport cabinet R R (B) Set of 4 non-marking rubber corner bumpers R R (PB) Full perimeter non-marking bumper (Add 2" to overall width and depth) R R (WB) Wheel brakes, set of 2 R R (5x2) Heavy-duty casters, set of 4 R R (CP) Correctional package, includes welded casters and hole in door latch for paddlelock DEGREES FAHRENHEIT TEMPERATURE PROFILE 220 205 190 175 160 145 130 115 Preheat Time 100 Recovery Time 85 70 0 1 HR 2 HR 3 HR 4 HR 5 HR 6 HR R R (CHT-2) Canned Heat Tray Insert R R (Y4) Polyurethane 4" casters (set of 4) R R (Y5) Polyurethane 5" casters (set of 4) R R (FL) Floor Lock J-6 SPEC LIMITED WAANTY: piper products warrants to the original purchaser parts and labor for a period of twelve (12) months from the date of purchase. See manufacturer s complete warranty for details. It is our policy to build equipment which is design certified by companies that have been accredited at the Federal Level by the Occupational Safety and Health Agency (OSHA) and ANSI as a National Recognized Testing Laboratory. These companies include CSA International, Underwriters Laboratories, and the National Sanitation Foundation. However, a continuing program of product improvement makes it necessary to submit new models to the agencies as they are developed. Consequently, all models may not bear the appropriate labels at all times. We reserve the right to change specifications and product design without notice. Such revisions do not entitle buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment. Information is not for design purposes. 248
Universal Heated Proofer Aluminum, Non-Insulated & Insulated JOB ITEM # QTY # MODEL NUMBER 934-HU (non-insulated) 1012-U (insulated) 1012-U PIPER S SUPERIOR FOUNDATION Featured on our toughest racks: Two 14 gauge aluminized steel reinforcing channels support our.125 thick aluminum bottom panel. The edges are formed and rolled to create a built-in bumper and heavy duty plate casters make this the strongest foundation in the industry. Piper s aluminum Heated Cabinets /Proofers are designed with features to make your operation efficient. Controls can be easily accessed at the front of the Cabinet without opening the doors and the entire heater unit can be removed for cleaning and maintenance. STANDARD FEATURES Base is a solid bottom constructed of.125 aluminum, rolled edge base acts as a built-in bumper Two 14-gauge aluminized steel reinforcing channels attach the casters and support the bottom panel Frame consist of four extruded channels 1-1/2 x 5/8 x.094 aluminum. Corners have.190 channel supports for reinforcement Double pan top constructed of two.080 thick aluminum panels, fully welded corners Universal Glides are adjustable on 3 centers to accommodate various steam table and sheet pan sizes Door panel is.125 PVC coated aluminum attached to cabinet with bakery hinges, 270 degree door swing with card clip Back panel is.080 aluminum fully welded with removable multiple louvered vent stack 1/2 extruded aluminum tie bar keeps cabinet square 16-gauge stainless steel positive gravity latch is provided to keep door closed during transport Stainless steel side door latch holds door open One inch insulation surround the cabinet (Insulated models only) Card clip, easy identification of cabinet content when door is closed HEAT SYSTEM Individual heat and food moisture controls Digital read-out for accuracy Stainless steel 1 gallon water pan Unit removable for easy cleaning & maintenance 60 minute timer 120 volt, 12.5 AMP, 1500 Watts HEAVY-DUTY CASTERS 5 diameter x 1/1/4 wide swivel sealed wheels 350 lb. capacity Maximum resistance to chemicals, acids, bases, alcohol, water and steam Maximum low temperature flexibility or superior performance even in freezing temperatures COMMON OPTIONS Lexan full-view door Push handle Dutch doors Personalized embossment See reverse side for additional options WAANTY One year parts and labor. Warranty is detailed on inside front cover of the price list. SPEC J-7 249
Universal Heated Proofer Aluminum, Non-Insulated & Insulated Universal glide easily adjustable Model # J-7 SPEC Description (A) Height Width Depth Channel Spacing Set of Glides 12x20 Pan Capacity UNIVERSAL LEDGE 2-1/2 4 6 18x26 Tray Capacity 934-HU non-insulated 68-7/8 25 31 3-1/8 12 24 24 6 12 240 1012-U insulated 67-1/2 31 30 1/2 3-1/8 12 24 24 6 12 260 Pan glides are adjustable on 3 1/8" centers. Universal models shipped with 12 sets of glides, units can hold 16 sets All models 120 volt, 12.5 APM, 1500 watts OptiONS / ACCESSORIES R R (109497) Set of glides R R (LD) Lexan full-view door R R (DD) Dutch door, only available on 941 units R R (CH) Chest handles, set of 2 R R (EMB) Personalized embossment, 12 letters per line R R (PH) Push handle R R (I) Insulating transport cabinet R R (B) Set of 4 non-marking rubber corner bumpers R R (PB) Full perimeter non-marking bumper (Add 2" to overall width and depth) R R (WB) Wheel brakes, set of 2 R R (5x2) Heavy-duty casters, set of 4 R R (CP) Correctional package, includes welded casters and hole in door latch for paddlelock R R (CHT-2) Canned Heat Tray Insert R R (Y4) Polyurethane 4" casters (set of 4) R R (Y5) Polyurethane 5" casters (set of 4) R R (FL) Floor Lock DEGREES FAHRENHEIT TEMPERATURE PROFILE Ship Wt.(lbs) 220 205 190 175 160 145 130 115 Preheat Time 100 Recovery Time 85 70 0 1 HR 2 HR 3 HR 4 HR 5 HR 6 HR LIMITED WAANTY: piper products warrants to the original purchaser parts and labor for a period of twelve (12) months from the date of purchase. See manufacturer s complete warranty for details. It is our policy to build equipment which is design certified by companies that have been accredited at the Federal Level by the Occupational Safety and Health Agency (OSHA) and ANSI as a National Recognized Testing Laboratory. These companies include CSA International, Underwriters Laboratories, and the National Sanitation Foundation. However, a continuing program of product improvement makes it necessary to submit new models to the agencies as they are developed. Consequently, all models may not bear the appropriate labels at all times. We reserve the right to change specifications and product design without notice. Such revisions do not entitle buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment. Information is not for design purposes. 250
Aluminum Tray Delivery Carts Steam Table Pans, Meal Trays, & Bun Pans JOB ITEM # QTY # MODEL NUMBER AD-5S AD-6S AD-7S AD-8S AD-9S AD-10S AD-10 AD-12 AD-14 AD-16 AD-18 AD-20 AD-20 PIPER S SUPERIOR FOUNDATION Featured on our toughest racks: Two 14 gauge aluminized steel reinforcing channels support our.125 thick aluminum bottom panel. The edges are formed and rolled to create a built-in bumper andheavy duty plate casters make this the strongest foundation in the industry. Dimensions AD-5S - 37-5/8 x 21-3/4 x 23-3/4 AD-6S - 43-5/8 x 21-3/4 x 23-3/4 AD-7S - 49-5/8 x 21-3/4 x 23-3/4 AD-8S - 55-5/8 x 21-3/4 x 23-3/4 AD-9S - 61-5/8 x 21-3/4 x 23-3/4 AD-10S - 67-5/8 x 21-3/4 x 23-3/4 AD-10-37-5/8 x 24-1/4 x 33-1/4 AD-12-43-5/8 x 24-1/4 x 33-1/4 AD-14-49-5/8 x 24-1/4 x 33-1/4 AD-16-55-5/8 x 24-1/4 x 33-1/4 AD-18-61-5/8 x 24-1/4 x 33-1/4 AD-20-67-5/8 x 24-1/4 x 33-1/4 Piper Aluminum Delivery Carts feature fully welded construction to withstand years of meal tray delivery. Standard features include push handle, drain, 270 degree door swing, heavy-duty casters and rolled edge to act as a bumper. STANDARD FEATURES Base is a solid bottom constructed of.125 aluminum with a rolled edge to act as a bumper Two 14-gauge aluminized steel reinforcing channels attach the casters and support the bottom panel Frame consists of four extruded channels 1-1/2 x 5/8 x.094 aluminum. Corners have.190 extruded threesided channel supports for reinforcement Double pan top constructed of two.080 thick aluminum panels, fully welded corners Slides are 4-5/8 stepped with 6 spacing,.125 thick extruded aluminum continuously welded to the frame Door panel is.125 PVC coated aluminum attached to cart with bakery hinges, 270 degree door swing and card clip Back panel is.080 aluminum fully welded Push handle Drain in base of cart for ease in cleaning Positive gravity latch is provided to keep door closed during transport Side door latch holds door open HEAVY-DUTY CASTERS 5 diameter x 1-1/4 wide swivel sealed heavy duty wheels, 2 with brakes 350 lb. capacity Maximum resistance to chemicals, acids, bases, alcohol, water and steam Maximum low temperature flexibility or superior performance even in freezing temperatures COMMON OPTIONS Personalized embossment See reverse side for additional options WAANTY One year parts and labor. Warranty is detailed on inside front cover of the price list. SPEC J-8 251
Aluminum Tray Delivery Carts Steam Table Pans, Meal Trays, & Bun Pans C A B 46" Shown without door for interior detail. Model# Height (A) Width (B) Depth (C) Tray/Pan Spacing Tray/Pan Capacity* Trays/ Pan per Slide Ship Wt. (lbs) AD-5S 37-5/8 21-3/4 23-3/4 6 5 1 100 AD-6S 43-5/8 21-3/4 23-3/4 6 6 1 109 AD-7S 49-5/8 21-3/4 23-3/4 6 7 1 116 AD-8S 55-5/8 21-3/4 23-3/4 6 8 1 122 AD-9S 61-5/8 21-3/4 23-3/4 6 9 1 131 AD-10S 67-5/8 21-3/4 23-3/4 6 10 1 142 AD-10 37-5/8 24-1/4 33-1/4 6 10/5 2/1 112 AD-12 43-5/8 24-1/4 33-1/4 6 12/6 2/1 126 AD-14 49-5/8 24-1/4 33-1/4 6 14/7 2/1 136 AD-16 55-5/8 24-1/4 33-1/4 6 16/8 2/1 148 AD-18 61-5/8 24-1/4 33-1/4 6 18/9 2/1 161 AD-20 67-5/8 24-1/4 33-1/4 6 20/10 2/1 174 OPTIONS / ACCESSORIES R R (EMB) Personalized embossment, 12 letters per line R R (B) Set of 4 non-marking rubber corner bumpers R R (PB) Full perimeter non-marking bumper R R (5x2) Heavy-duty casters, set of 4 R R (PR) Pass thru option R R (WB) Two locking casters Each slide will accommodate a 14 x 18 or 15 x 20 tray, 12 x 20 pans, 18 x 26, and 14 x 18 bun pans. Handle is not included in dimensions. Handle adds 3-3/8 to the cart. J-8 SPEC LIMITED WAANTY: piper products warrants to the original purchaser parts and labor for a period of twelve (12) months from the date of purchase. See manufacturer s complete warranty for details. It is our policy to build equipment which is design certified by companies that have been accredited at the Federal Level by the Occupational Safety and Health Agency (OSHA) and ANSI as a National Recognized Testing Laboratory. These companies include CSA International, Underwriters Laboratories, and the National Sanitation Foundation. However, a continuing program of product improvement makes it necessary to submit new models to the agencies as they are developed. Consequently, all models may not bear the appropriate labels at all times. We reserve the right to change specifications and product design without notice. Such revisions do not entitle buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment. Information is not for design purposes. 252