GLX Series 1kW to 16kW Central System
GLX Series Sine Wave RATINGS TABLE Size Input Current @120V Output Current @120V Input Current @277 Output Current @277 Output Watts Battery (DC) Voltage 1kW 16 8 7 4 1000 192 6 1.5kW 21 13 9 5 1500 192 9 Battery Current 2kW 27 17 12 7 2000 192 12 3kW 37 25 16 11 3000 192 18 4kW 48 33 21 14 4000 192 24 5kW 64 42 28 18 5000 192 30 6kW 80 50 35 22 6000 192 36 7kW 91 58 39 25 7000 192 41 8kW 107 67 46 29 8000 192 47 10kW 134 83 56 36 10000 192 59 12kW 160 100 69 43 12000 192 71 14kW 182 117 79 51 14000 192 83 15kW 198 125 88 54 15000 192 89 16kW 214 133 95 58 16000 192 95 * Consult factory for other options. ** Input currents are shown at high charge with full load rating per UL. Normal and running currents are considerably less. APPLICATIONS Airports Apartments/Condominium Complexes Assisted Living Centers Banks, Financials Casinos City, County, State, Federal Buildings Grocery Stores Hospitals Hotels Industrial Medical Offices Military Complexes Movie Theaters Office Buildings Parking Garages Prisons Race Tracks Train, Subway, Bus Stations Religious Facilities Restaurants Department Stores Schools, Colleges Shopping malls Sport facilities Superstores Tunnel and Toll Bridges 1
Dimensions for A: 6kW and under 30 W x 72 H x 30 D 72 30 30 Dimensions for B: Over 6kW 60 W x 72 H x 30 D 72 60 30 2
GLX Series Sine Wave System Overview: The GLX Series Inverter is a central emergency lighting system designed to operate all loads emergency. In the event of a power abnormality event, the GLX will provide emergency power to its connected loads for a run-time of no less than 90 minutes. The GLX is a system designed to provide superior dependability and security to any commercial, institutional or industrial environment in a minimal footprint. The line voltage output allows the remote fixtures to be located up to 2000 feet from the unit. Power Factor:.9 leading to.9 lagging GLX series inverter is designed to occupy a minimum footprint. Capable of supplying power to a nominal load of up to 8000 watts in a 30x30 footprint, the GLX central inverter system can be installed in any electrical room and centralizes all emergency lighting testing to one central location and streamlines any eventual maintenance and required record-keeping. The GLX series is a compact, modular emergency lighting inverter. Typical applications include all types of LED, fluorescent, incandescent, quartz re-strike and low voltage lighting. The modular design and low MTTR (mean-time-to-repair) ensure easy maintenance. The GLX is well suited for stairwell, hallway, and outdoor emergency egress lighting, large size office buildings, schools and warehouses. GLX Series inverter employs premium (*VRLA) batteries, designed with an expected service life of 10 years per battery manufacturer guidelines. *VRLA Batteries are maintenance free. Periodic checks, coupled with standard record keeping and maintenance of the inverter would ensure the longevity of the battery module. Theory of Operation: The GLX is designed to power the emergency egress lighting at full brightness for 90 minutes. The system is installed between the lighting distribution panel and the emergency circuit (s) and ahead of any local switches. Upon failure of the normal power source to the connected lights, the GLX will continue to power the emergency fixtures connected to it for a minimum of 90 minutes utilizing standard building lighting components. When the normal power is restored the GLX will automatically switch the lighting fixtures back to the normal source and recharge the batteries so that they are ready for the next power outage. The system may also be configured for normally off or for switched load capability as an option. Applications: The GLX Series Inverter will operate incandescent, fluorescent, and LED lamps with power factor greater than.9. *Self ballasted compact fluorescent and replacement LED screw in lamps may be used HID. *We recommend that only Energy Star recognized compact fluorescent or LED lamps be used with this equipment. Operating Parameters: Run Time: minimum 90 minutes Housing: Heavy duty steel construction finished in powder coat paint. Environment: Operating temperature: 32F (0C) 104F (40C) Altitude: 10,000 feet above sea level without derating Storage temperature: -20 to 60 degrees C. Note batteries will require frequent recharging if stored above 35 degrees C. GLX design will provide full rated VA output from.9 leading to.9 lagging power factor. Loads outside of this power factor will reduce the total output of the unit depending on the va at that power factor. 3
Order Information GLX 700 120 120 OPTIONS GLX GLX Series Pure Sine Wave Lighting Inverter Capacity 1kW 2kW 3kW 4kW 5kW 6kW 8kW 10kW 12kW 16kW* Input Voltage 120V 208V 277V 480 Output RUNTIME Voltage (Other than 90 Minutes) 120V R30-30 Minutes 208V R120-120 Minutes 277V 120/277V 480 OC OPTIONS F- Fast Charge I - Inverter on Dry Form C Contact S - Summary Dry Form C Contacts T - Output Trip (supervised) Alarm Z - Seismic Mounting OUTPUT BREAKERS Example A 20 06 POLE A-1-Pole QTY Maximum 12 pole positions Warranty 1-Year full warranty on system electronics. Battery warranty 1-year with 9-years prorata. Maintenance contracts available. N - normally on O - normally off S - switched (Distribution Breakers) 10, 16, 20, 25, 32, 40, 50, 63 Note: 20 Amp output breakers standard unless otherwise ordered. *Consult factory for other configuration/options A: PO Box 20302 Lehigh Valley PA 18002 V: (610) 628 1488 W: www.iepsystems.com E: info@iepsys.com 4
GLX Series Sine Wave Black powder coated paint OVERVIEW: Battery Breaker Main Breaker Branch Breakers Neutral Block Ground Cooling Fan Transformers Main Circuit Board Battery Shelf 5
Display Panel Call Today: 610.628.1488 6
GLX Series Sine Wave Operating Parameters: Run Time: minimum 90 minutes Inverter efficiency: >90% Housing: Heavy duty steel construction finished in white powder coat paint. Environment: Operating temperature: 32F (0C) 104F (40C) Altitude: 10,000 feet above sea level without derating Storage temperature: -20 to 70 degrees C. Note: batteries will require frequent recharging if stored above 35 degrees C. *We recommend that only Energy Star recognized compact fluorescent or LED lamps be used with this equipment. GLX design will provide full rated VA output from.9 leading to.9 lagging power factor. Loads outside of this power factor will reduce the total output of the unit depending on the va at that power factor. Options: Suffix NOR - Normally off relay 1 required per every 20 amps of load (coil voltage matches input voltage of unit). Suffix ITP Input breaker trip alarm Suffix OTP Output breaker trip alarm, 1 per output breaker Suffix BTP Battery breaker trip alarm Suffix OCB_ Additional output circuit breakers (note 20 amp output breakers are standard unless otherwise specified. Suffix R30 - Battery capacity of 30 minutes for when the system is used with a permanently installed emergency generator. Suffix R120 Battery capacity of 120 minutes ( may require additional enclosures depending on the rating of the unit). Suffix RS232 - Suffix 208 or 240 or multiple voltage outputs may require additional cabinets. Standard features: Footprint 30W by 72H for all models. Free standing cabinet designed for floor mount. 16 gauge cold-rolled steel construction finished in powder coat paint. 6th generation IGBT technology for high effi ciency, low loss power inversion, SCR based rectifier, solid-state transfer switch, PWM, low THD to provide a system with high reliability and high efficiency. MTTR of less than 30 minutes for any one component. ETL listed to UL 924, meets or exceeds the requirements of OSHA, NEC, NFPA and other codes OCPD (over-current protective devices) standard on input, battery and output. Additional output breakers are optional. Standard cabinet designed for ease of installation, wiring and maintenance. Front mounted meter panel for intuitive system status. Basic alarms for overload, overload shutdown, high temperature, near low battery and low battery shutdown. 92% efficiency on standby. Specifications: Input: Voltage: 120, 208, 240, 277 or 480 VAC 2 wires plus ground +/- 15% Frequency: 60 Hz +/- 3 Hz Protection: Circuit Breaker Output: Voltage: 120, 208, 240, 277, or 480 VAC 2 wire plus ground Frequency: 60 Hz +/-.5 Hz THD: > 3% Linear load Regulation: +/- 3% for 50% load change Inverter overload: 110% for 5 minutes Protection: Output Circuit Breaker Battery: Type: Premium 10 year design life Valve Regulated Lead Acid (VRLA) Voltage: 192VDC nominal. Protection: DC Overcurrent Protective Device (OCPD) inside main electronic section. 7
Power Rating: Capacity: 1000W 16KW single phase output with latest PWM technology to provide the most advanced performance and reliability. Input: 120V, 208V, 240V, 277V or 480V input 60Hz* Output: 120V, 208V, 277V or 120/277 VAC true online design Efficiency: >92% efficient at 100% linear load Batteries: Sealed, maintenance-free, lead calcium (AGM) batteries with10 year prorated warranty. The GLX employs Smart Battery Monitoring System which is temperature compensated and maintains maximum run-time and battery life. Electronics: Microprocessor controlled; recharge and over charge protection standard Lamps and Loads: Emergency power provides FULL LIGHT OUTPUT from all lamps and fixtures for the entire run-time. GLX Series Inverter operates fluorescent, CFL, incandescent, quartz, LED, HIP and other approved lamp types and loads. Codes: Listed to UL 924, NFPA 101, NFPA 70 NEC, and OSHA Protection: Provides overload, surge and undercurrent protection. Surge protection against load surges as defined in ANSI/IEEE C62.45 category A and B. Diagnostics and Maintenance: GLX Series On-board Monitoring System provides complete self checking capabilities and LED Indicator light Monitor. Informative advanced Metering Display and Alarms keep you in control of your emergency lighting environment 24/7. Automatically performs checking ensuring a safely lighted environment prior to an emergency Single point of testing instead of hundreds with battery packs. Protection: Space saving small footprint Free Standing Indoor NEMA 1 enclosure with modular design enables flexible installation. Installation: Modular design and small footprint allow easy installation in electrical closet or other convenient locations. Extended warranty available. Warranty: 1-Year full warranty on system electronics. Battery warranty 1-year with 9-years prorata. Maintenance contracts available. Cabinet: Space saving small footprint Free Standing Indoor NEMA 1 enclosure with modular design enables flexible installation. 8
GLX Series Sine Wave CONTACT US IEP Systems A PO Box 20302 Lehigh Valley PA 18002 P tel.:(610) 628 1488 W website: www.iepsys.com E e-mail: info@iepsys.com