Yamaha XT660R special parts 1 Handlebar Cockpit from page 998 2 Protection from page 999 3 Tank bag from page 1003 4 5 Tail rack bag from page 1003 Case systems from page 1005 www.touratech.de/yamahaxt660
3 4 1 5 2
998 Handlebar Conversion Set for WRP Pro Bar Medium Handlebar, XT 660 R Special clamps complete the conversion. The WRP handlebar is ideal for enduro and rallye events and due to its shape it is less tiring on wrists and arms and does not affect endurance. 041-0908 Handlebar Risers - Upright and relaxed riding position - Less strain on shoulders and wrists - Better handling of the motorbike - Polished aluminium or black - For sport bikes: better standing position and less tiring - Handlebar 30 mm higher 040-0275 Hand Protectors - Optimum lever protection (brake and clutch levers) - Robust even at high speeds - Good wind deflection (with spoiler) - Elegant design enhances the enduro looks - Different colours available Colours: black (0), white (1). When ordering, please substitute the X at the end of the order number for the number in brackets. 040-154X (hand protectors) 040-0570 (spoiler black) Fork Springs Yamaha XT660R Touratech fork springs are wound progressively, and are much harder than the series springs. They therefore respond more sensitively, and simply eliminate minor unevennesses. Over large bumps or holes, the fork is prevented almost entirely from breaking through. This greatly increases driving safety not only on the road, but off-road, too! Installation is easy, and a TÜV certificate is included in the delivery. Inclusive fork oil. 046-5838 Hyperpro progressive replacement springs for fork and shock absorber, Yamaha XT660R *from 2004* Full set by Hyperpro, the Dutch specialist for suspension products. The set includes replacement fork springs and a replacement spring for the shock absorber. 046-5839
Rear Brake Fluid Reservoir Cover This beautiful looking, functional cover is simply screwed onto the existing mounting points. This ensures that it is no longer so easy for anyone to remove the brake fluid reservoir cover. It is still very easy to read the level in the reservoir. Made of laser-cut stainless steel. 046-0120 Yamaha XT660R 999 Left Heel Guard The somewhat large original cover is replaced by this beautiful, functional part. The laser-cut, CNC turned part is screwed onto the existing fitting points. Made of stainless steel. 046-0160 Right Heel Guard (Brake Cylinder Cover) This beautiful, functional cover replaces the somewhat large and not so delicate original part on the XT660R. The rear brake cylinder and also the cable are well covered and protected. The laser-cut, CNC turned part is screwed onto the existing fitting points. Made of stainless steel. 046-0162 Brake lever extension for Yamaha XT660E Ténéré from 2008 onwards / XT660R/X from 2004 onwards Our extension offers you a larger support surface and safe pressure on the brake lever. 046-0291 Aluminium silencer covers Yamaha XT660R -2006 The look of the original plastic parts does not appeal to some people. Therefore we have decided to offer an alternative. The light aluminium covers, manufactured to a high standard, cover all the not so beautiful welding seams and fitting points and the important parts of the silencer are still protected. Made of anodised aluminium. The delivery schedule includes parts for the right and left hand sides. 046-0150
1000 Sump Guard Large As well as the manifold pipes, this rugged, vibrationfree sump guard made from 4 mm strong aluminium also protects your XT s cooling water pump. The two mounting brackets are made of stainless steel and can be fitted quickly and easily. The lasered, CNC turned aluminium part has a very high degree of intrinsic stability and fits perfectly. A must when riding your XT off road. 046-0180 Aluminium Engine Guard Small Is the manifold of your XT660R already dented? This does not have to happen - with our aluminium engine guard: This vibration-free but still rigid engine guard will protec your Yamaha XT660R manifold pipes. The lasered, CNC turned aluminium part has a very high degree of intrinsic stability. This is achieved by using 4mm aluminium and canting. The mounting brackets are made of stainless steel and can be fitted to the XT660R without any modifications. The engine guard gives the XT660R an enduro appearance. 046-0110 Crashbars Yamaha XT 660 Even falling off the stand can damage tank and fairing of the XT 660 R. Sometimes, a fall can cause even more damage. To solve this problem, there are very rugged engine bars available for the Yamaha XT 660 R that wrap around the fairway. Steel tube with black plastic coating. Rigid construction. Comes in two pieces. 046-0182 Kickstand Switch Cover Useful, stylish cover for minimising kickstand switch and thus motorbike failures effectively. The cover is made of laser-cut stainless steel. 046-0100
Heel Guard, Engine Guard Yamaha XT660R 1001 /X Gear Lever Lightweight, stylish, folding aluminium gear lever for your XT660. It is also ideal for bigger feet. 041-0637 Rallye Footpegs These footpegs have proved to be reliable at our rallye events. They offer considerably wider foot base support and also allow increased comfort and longer distances to be covered while standing on the footpegs. These footpegs also provide more grip as the grip studs have very sharp edges. 046-0130 *Works* long-distance foot pegs for Yamaha XT660R/XT660Z Tenere 52 mm wide and 4 mm thick stainless steel claw profile that is kind to your boots Perfect combination of grip and self-cleaning With a more slender design for better ground clearance Significantly less susceptible to impacts Strengthened mounting point With a blasted surface and laser inscription for a superior finish German TÜV Type Approval 046-5320 Pivot Pegz - *Mark3* Yamaha Ténéré ( 08), XT 660 R/X/Z, XTZ750 Ténéré The new mega wide Mark 3 Pivot Pegz - 60mm WIDE!! An absolute breakthrough - and not just for cross-country and enduro riders who bemoan the lack of sensitivity of the original pegs. Thanks to a spring joint, these foot pegs follow the forward and backward movements of the foot to an angle of 20 degrees. This protects the boot, and gives the Rider a better position on the bike - even in extreme situations 040-5508
1002 Excel Rim with Set of Spokes for front wheel 53,34 x 4,7cm (21 x 1,85 ) / 36 for rear wheel 43,18 x 8,89cm (17 x 3,5 ) / 36 Over countless kilometres of testing and travelling, we have found that the weak point of many original wheels is the rims. With our rim sets, you can rectify this defect without having to buy a whole new wheel! Made to the highest specifications, Excel rims have been a guarantee of the ultimate in quality for many years. 046-0190 front 046-0191 rear Chain Guard - Quick and easy fitting - Optimum use of existing fixing points - Easy installation - Sporty look - Laser machined aluminium - Natural anodised aluminium - Lightweight 040-1420 Steel Braided Brake Lines Precise action point, will last forever, nearly unbreakable these are the most important features of steel braided brake lines that Have been tried and tested a thousandfold. Now these brake lines are also availabe for the XT 660 R. 040-0346 (front) Tool Bag under the XT 660 R Seat Handy bag for all sorts of bits and pieces such as tools, first-aid kit, camera etc. Fits perfectly unter the XT 660 R s tail and is protected against theft. Water protected Made from Teflon-coated CORDURA which is both water-repellent and dirt-resistant. Made in Germany by KAHEDO. 055-1232
XT 660 R Tank Bag The XT 660 R tank bag is perfectly adapted to the tank s shape. Made from Teflon-coated CORDURA which is both water-repellent and dirt-resistant. Colours: black, grey with sewn in, reinforced reflective strips/cords. Dimensions (l x w x h): approx. 29 x 24 x 17/25 cm Capacity: approx. 12/17,5 litres Chain Guard Yamaha XT660R 1003 055-1130 Water protected Tail Bag for the Rear Seat This tail bag can be secured on the rear seat. A zip expands the bag to up to 20 litres of volume. In addition, there is an elastic cord which can be used to store wet rain gear. Made from Teflon-coated CORDURA which is both water-repellent and dirt-resistant. Made in Germany by KAHEDO. Dimensions: approx. 32 x 26 x 13/25 cm Colours: black, grey 055-1213 Water protected XT 660 R Tail Rack Bag with or without Luggage Rack An absolutely brilliant solution for storing your luggage securely. No support needed. Reflewctive side strips round off the bag. Because of its additional, integral rear strap, it can, of course, also be used in combination with our luggage rack 046-0140. Capacity: approx. 4/8 litres 055-1214 Water protected Handlebar Bag Small, smart bag for all 22 mm handlebars. Made from Teflon-coated CORDURA which is both water-repellent and dirt-resistant. Made in Germany by KAHEDO. Colours: black Volume: approx. 1 litre Dimensions (l x w x h): 8 x 37 x 5 cm 055-1230 Water protected
1004 Mudguard Flap - Efficient mudguard flap for rear wheel - Protects against dirty back and soiled luggage - Reinforces number plate - Powder-coated aluminium (black) 040-0281 Strong Luggage Rack The Yamaha XT660R does not have good fitting points for a sturdy luggage rack. In spite of this we have managed to develop a luggage rack that allows you to carry more than just a pair of overalls. This is achieved by clever attachments on the vehicle and additional supports. The strong luggage rack is made of a combination of tubular pipes and anodised aluminium plate. No parts have to be drilled onto the vehicle and no modifications need to be made. Even the beautiful original handles are retained. 046-0170 Aluminium Luggage Rack This small, delicate luggage rack can be fitted to the XT660R in a few minutes. The original handle is retained but it still forms a sturdy support. Nothing has to be changed on the vehicle - no holes have to be drilled or filed. Simply fit it and have fun! Made of a combination of anodised aluminium and stainless steel. 046-0140 Pannier Racks for Yamaha XT660R Reliable: -Robust steel pannier frame made from 18 mm diameter steel tube with a 2 mm thick wall -Bolted crosspiece for better rigidity -Black plastic coated Can be used with ZEGA panniers or other panniers in conjuction with our 18 mm mounting hardware. 051-0105
Luggage Racks, Pannier Systems Yamaha XT660R 1005 Zega Pro Aluminium Pannier System Yamaha XT660R The aluminium pannier system again has a very robust construction. We have tried to bring the pannier racks and the panniers as close as possible to the motorcycle. Numerous tests have already been performed in order to ensure that the entire development satisfies the required demands. The rack is made of 18 mm steel tubing and is attached to existing mounting points using special fixing clips and reinforcing pieces. - ready fitted fixing kits - sturdy connecting bar - original indicators can be re-used - overall width: 101 cm Delivery schedule of the system: 2 aluminium pannier Zega Pro 38 litres, with pre-fitted 18 mm fixing kit 1 pannier rack including mounting hardware 052-3621 *38 liter* 052-3622 *45 liter*