Non-handed Standard backset 2 3/4 (70mm) Standard solid brass 6-pin tumbler cylinder Schlage keyway oncealed mounting plate and screws For doors 1 9/16 (40mm) to 2 (51mm) door thickness G1L SRIS HVY-UTY OMMRIL LOKSTS Lockset has non-removable steel thru bolt mounting posts Stainless steel 1/2 (13mm) deadlatch bolt throw Standard 1 1/8 (29mm) x 2 1/4 (57mm) faceplate Standard S 1 1/4 (32mm) x 4 7/8 (124mm) strike vailable in a variety of standard functions asy installation for new construction or retrofit Fits NSI 115.2, 161 door prep onforms to NSI 156.2, Grade 1 3 hour UL fire rating 5 year mechanical limited warranty SFI model available G1L series heavy-duty locksets are recommended by door hardware specialists for high traffic commercial doors. The G1L locksets are recognized for value while delivering lasting performance and security.
G1L SRIS LOKSTS SPIFITION ll bored lever locksets shall be G1L series. Locks shall meet the requirements of NSI 156.2, Grade 1. G1L series lever locksets shall be adjustable for 1 9/16 (40mm) to 2 (51mm) door thickness. Locks shall fit standard 2 1/8 (55mm) cross bore (161 door prep). Latch bolt shall have standard 2 3/4 (70mm) backset, with 1/2 (13mm) latch throw and all locks shall be of heavy-duty construction and shall have a 3-hour UL listing for use on fire doors. Locks shall be non-handed and supplied with all necessary mounting fasteners. SIZ HRT & SLTION GUI MOL NUMBR QTY PR S WIGHT LBS / KG G1L 10 Passage 53.0 / 24.0 B G1L 40 Privacy 53.0 / 24.0 G1L 53 ntrance 54.0 / 24.7 G1L 53 I ntrance 33.4 / 15.2 G1L 60 I Store I, less core 26 10 29.5 / 12.8 G1L 70 lassroom 54.0 / 24.7 SRIS G1L I 3 9/16 (90) B* * 2 1/2 (67) 1/2 (13) 4 5/8 (117) * imensions applicable for 1 3/4 (44mm) door thickness ORRING XMPL: G1L SRIS 10 1 9/16 to 2 (40 to 52) -26 G1L 70 I lassroom 31.6 / 14.4 G1L 80 Storeroom 53.0 / 24.0 G1L 80 I Storeroom I, less core 61.6 / 28.0 PRTS & SSORIS STRIK-T S-T G1L234 G1SL234 T-type strike, 1 1/8 (29mm) x 2 3/4 (70mm) S strike with adjustable tab 2 3/4 (70mm) backset entry deadlatch 2 3/4 (70mm) backset passage spring latch STRIK-T S-T LTH SPRING LTH R3 06/13 26 Satin chrome imensions unless specified otherwise are: Inches (Millimeters)
G1B SRIS HVY-UTY OMMRIL LOKSTS Non-handed Standard backset 2 3/4 (70mm) Standard solid brass 6-pin tumbler cylinder Schlage keyway oncealed mounting plate and screws For 1 9/16 (40mm) to 2 (51mm) door thickness Stainless steel 1/2 (13mm) deadlatch bolt throw Standard 1 1/8 (29mm) x 2 1/4 (57mm) faceplate Standard 1 1/4 (32mm) x 4 7/8 (124mm) strike vailable in a variety of standard functions asy installation for new construction or retrofit Fits NSI 115.2, 161 door prep onforms to NSI 156.2, Grade 1 3 hour UL fire rating 5 year mechanical limited warranty SFI model available G1B series heavy-duty locksets are recommended by door hardware specialists for high traffic commercial doors. The G1B locksets are recognized for value while delivering lasting performance and security. www.paramounthardware.com
G1B SRIS LOKSTS SPIFITION ll bored knob locksets shall be G1B series. Locks shall meet the requirements of NSI 156.2, Grade 1. G1B series ball locksets shall be adjustable for 1 9/16 (40mm) to 2 (51mm) door thickness. Locks shall fit standard 2 1/8 (55mm) cross bore (161 door prep). Latch bolt shall have standard 2 3/4 (70mm) backset, with 1/2 (13mm) latch throw and all locks shall be of heavy-duty construction and shall have a 3 hour UL listing for use on fire doors. Locks shall be non-handed and supplied with all necessary mounting fasteners. SIZ HRT & SLTION GUI MOL NUMBR QTY PR S WIGHT LBS / KG G1B 10 Passage 33.0 / 15.0 G1B 40 Privacy 33.0 / 15.0 G1B 53 ntrance 34.5 / 15.7 G1B 53 I ntrance I, less core 61.6 / 28.0 G1B 60* Store 34.5 / 15.7 G1B 60 I Store I, less core 26 10 61.6 / 28.0 B G1B 70 lassroom 33.0 / 15.0 G1B 70 I lassroom I, less core 61.6 / 28.0 G1B 80 Storeroom 33.0 / 15.0 SRIS I B* I G1B 80 I Storeroom I, less core 61.6 / 28.0 G1B 2 3/4 (68) 2 15/16 (75) 3/4 (19) 2 3/16 (55) 1 9/16 to 2 (40 to 52) G1B 82 Institution 33.0 / 15.0 * imension applicable for 1 3/4 (44mm) door thickness ORRING XMPL: G1B 10 SRIS -26 PRTS & SSORIS STRIK-T S-T G1L234 G1SL234 T-type strike, 1 1/8 (29mm) x 2 3/4 (70mm) S strike with adjustable tab 2 3/4 (70mm) backset entry deadlatch 2 3/4 (70mm) backset passage spring latch STRIK-T S-T LTH SPRING LTH R3 06/13 26 Satin chrome imensions unless specified otherwise are: Inches (Millimeters) * Special order / long lead
Non-handed For 1 3/8 (35mm) to 1 7/8 (48mm) door thickness Standard backset 2 3/4 (70mm); optional 2 3/8 (60mm) Latch with square corners faceplate 12 SRIS OMMRIL LOKSTS Standard S strike Solid brass 6-pin tumbler cylinder Standard Schlage keyway Rose cover conceals mounting screws asy installation, fits NSI 115.2, 161 door prep Wide variety of functions available onforms to NSI 156.2 series 4000, Grade 2 3 hour UL fire rating 1 year mechanical limited warranty SFI model available 12 series standard duty locksets are recommended by door hardware specialists for use in multi-unit housing or standard commercial applications. www.paramounthardware.com
12 SRIS LOKSTS SPIFITION ll bored lever locksets shall be 12 Series. Locksets shall meet NSI 156.2 Series 4000, Grade 2 specification and NSI 117.1 ccessibility ode requirements. The locksets shall have 3 hour fire UL rating. The lock chassis shall be made of steel and zinc construction materials with corrosion resistance protection. The latch bolt shall be made of brass chrome plated material with 1/2 (12.7mm) throw and deadlocking feature on keyed functions. The standard latch bolt backset shall be 2 3/4 (70mm) and optional 2 3/8 (60mm). The latch face plate shall be made of corrosion protected steel, 1 1/8 x 2 1/4 (28.5mm x 57.1mm) with square corners. The trim shall be made of wrought brass and bronze, with levers made of pressure die cast zinc, plated to the required finish. The cylinder shall be solid brass with 6-pin tumbler and a standard Schlage keyway. OPTIONL: finishes, latches, keyways, keying, backsets and strikes. SIZ HRT & SLTION GUI MOL NUMBR QTY PR S WIGHT LBS / KG 12-L00 ummy 20 33.2 / 15.1 12-L10 Passage 43.4 / 19.7 12-L40 Privacy 3, 26 44.8 / 20.3 B 12-L53 ntrance 46.2 / 21.0 12-L53 I ntrance, less cylinder 27.0 /12.3 SRIS B 12-L 3 11/32 (85.0) 2 7/8 (72.8) ORRING XMPL: 5/8 (15.5) 12-L SRIS 5 5/32 (130.8) 53 1 3/8 to 1 7/8 (35 to 48) OPTION 12-L53 12-L53-3 ntrance, with clutch 3, 26 44.2 / 20.1 12-L70 lassroom 3, 26 45.8 / 20.8 12-L70 I lassroom, less cylinder 26 27.0 /12.3 12-L70 10 lassroom, with clutch 44.0 / 20.0 12-L72* ommunication 45.0 / 20.5 12-L72* 3, 26 ommunication, with clutch 41.0 / 18.6 12-L80 Storeroom 40.8 / 18.5 12-L80 I Storeroom, less cylinder 26 27.0 /12.3 12-L80 Storeroom, with clutch 38.8 / 17.6 12-L82* Institution or utility 3, 26 42.8 / 19.5 12-L89 xit 27.0 / 12.3-26 PRTS & SSORIS STRIK-T S-T L238 L234 T-type strike, 1 1/8 (29mm) x 2 3/4 (70mm) S strike with adjustable tab 2 3/8 (60mm) deadlatch 2 3/4 (70mm) deadlatch SL238 SL234 XT5 2 3/8 (60mm) passage latch 2 3/4 (70mm) passage latch Latch extension for 5 (127mm) backset STRIK-T S-T LTH SPRING LTH XT5 R4 08/13 3 Polished brass plated 26 Satin chrome imensions unless specified otherwise are: Inches (Millimeters) * Special order
Non-handed For 1 3/8 (35mm) to 2 (51mm) door thickness Standard backset 2 3/4 (70mm); optional 2 3/8 (60mm) Latch with square corners faceplate S SRIS OMMRIL LOKSTS Standard S strike Solid brass 6-pin tumbler cylinder Standard Schlage keyway Rose cover conceals mounting screws asy installation, fits NSI 115.2, 161 door prep Wide variety of functions available onforms to NSI 156.2 series 4000, Grade 2 3 hour UL fire rating 1 year mechanical limited warranty S series standard duty locksets are recommended by door hardware specialists for use in multi-unit housing or standard commercial applications. www.paramounthardware.com
S SRIS LOKSTS SPIFITION ll bored lever locksets shall be S series. Locksets shall meet NSI 156.2 series 4000, Grade 2 specification and NSI 117.1 ccessibility ode requirements. The locksets shall have 3 hour UL fire rating. The lock chassis shall be made of steel and zinc construction materials with corrosion resistance protection. The latch bolt shall be made of stainless steel with a 1/2 (12.7 mm) throw and deadlocking feature on keyed functions. The standard latch bolt backset shall be 2 3/4 (70 mm) and optional 2 3/8 (60 mm). The latch face plate shall be made of corrosion protected steel, 1 1/8 x 2 1/4 (28.5 mm x 57.1 mm) with square corners. The trim shall be made of wrought brass and bronze, with levers made of pressure die-cast zinc, plated to the required finish. The cylinder shall be solid brass with 6-pin tumbler and a standard Schlage keyway. OPTIONL: latches, cylinders, keyways, keying, backsets and strikes. SIZ HRT & SLTION GUI MOL NUMBR QTY PR S WIGHT LBS / KG S00 ummy 12 22.6 / 10.3 B S10 Passage 27.0 / 12.3 S40 Privacy 27.7 / 12.6 F 26 S53 ntrance 6 28.6 / 13.0 S70 lassroom 28.6 / 13.0 SRIS B* * * F S 3 11/32 (85) *Varies with door thickness 2 5/8 (67) ORRING XMPL: 2 (51) S SRIS 4 1/2 (114) 1 3/8 2 (35 51) 53 23/32 (18.3) -26 S80 Storeroom 28.6 / 13.0 PRTS & SSORIS S-T STRIK-T TL001 TL002 TL003 S strike with adjustable tab T-type strike, 1 1/8 (29 mm) x 2 3/4 (70 mm) 2 3/8 (60 mm) passage spring latch 2 3/4 (70 mm) privacy spring latch 2 3/4 (70 mm) passage spring latch TL004 TL005 TL006 TL010 TL014 2 3/4 (70 mm) deadlatch 2 3/8 (60 mm) deadlatch 5 (127 mm) deadlatch 2 3/8 (60 mm) privacy spring latch dapter for 2 3/4 (70 mm) latches - extends to 5 (127 mm) S-T STRIK-T SPRING LTH LTH R3 02/14 26 Satin chrome imensions unless specified otherwise are: Inches (Millimeters)
Non-handed For 1 3/8 (35mm) to 1 7/8 (48mm) door thickness Standard backset 2 3/4 (70mm); optional 2 3/8 (60mm) Latch with square corners faceplate 22 SRIS OMMRIL LOKSTS Standard S strike Solid brass 6-pin tumbler cylinder Standard Schlage keyway Rose cover conceals mounting screws asy installation, fits NSI 115.2, 161 door prep Wide variety of functions available onforms to NSI 156.2 series 4000, Grade 2 3 hour UL fire rating 1 year mechanical limited warranty 22 series standard duty locksets are recommended by door hardware specialists for use in multi-unit housing or standard commercial applications. www.paramounthardware.com
22 SRIS LOKSTS SPIFITION ll bored knobsets shall be 22 Series. Knobsets shall meet NSI 156.2 Series 4000, Grade 2 specification requirements. The knobsets shall have 3 hour fire UL rating. The lock chassis shall be made of steel and zinc construction materials with corrosion resistance protection. The latch bolt shall be made of brass chrome plated material, with 1/2 (12.7mm) throw and deadlocking feature on keyed functions. The standard latch bolt backset shall be 2 3/4 (70mm) and optional 2 3/8 (60mm). The latch face plate shall be made of corrosion protected steel, 1 1/8 x 2 1/4 (28.5mm x 57.1mm) with square corners. The cylinder shall be solid brass with 6-pin tumbler and a standard Schlage keyway. SIZ HRT & SLTION GUI MOL NUMBR 22-B00 ummy QTY PR S WIGHT LBS / KG 50 29.9 / 13.6 22-B10 Passage 45.0 / 20.4 22-B40 Privacy 46.4 / 21.0 22-B53 ntrance 48.0 / 21.8 22-B53-L* ntrance, less core 47.2 / 21.4 22-B70 lassroom 47.3 / 21.5 22-B70-L* lassroom, less core 46.4 / 21.1 3, 32 22-B72* ommunication 20 51.0 / 23.2 B 22-B72-L* ommunication, less core 43.5 / 19.7 22-B80 Storeroom 50.2 / 22.8 SRIS B 22-B 2 15/16 (75.0) 2 5/8 to 3 (66 to 76.4) ORRING XMPL: 21/32 (21.5) 22-B SRIS 2 3/16 (56.0) 53 1 3/8 to 1 7/8 (35.0 to 48) -L OPTION 22-B80-L* Storeroom, less core 48.0 / 21.8 22-B82 Institution or utility 53.8 / 24.4 22-B82-L* Institution or utility, less core 47.3 / 21.5 22-B89* xit 35.0 / 15.9-32 PRTS & SSORIS STRIK-T S-T L238 L234 SL238 T-type strike, 1 1/8 (29mm) x 2 3/4 (70mm) S strike with adjustable tab 2 3/8 (60mm) deadlatch 2 3/4 (70mm) deadlatch 2 3/8 (60mm) passage latch SL234 XT5 2 3/4 (70mm) passage latch Latch extension for 5 (127mm) backset STRIK-T S-T LTH SPRING LTH XT5 R3 08/13 3 Polished brass plated 32 Satin stainless steel imensions unless specified otherwise are: Inches (Millimeters) * Special order / long lead
TL SRIS OMMRIL BOLTS Non-handed For 1 3/8 (35mm) to 1 7/8 (48mm) door thickness Standard backset 2 3/4 (70mm); optional 2 3/8 (60mm) and 5 (127mm) Single cylinder deadlock with inside thumbturn, or double cylinder function Solid brass 6-pin tumbler cylinder Standard Schlage keyway asy installation for new construction or retrofit onforms to 156.5, Grade 2 3 hour UL fire rating 1 year mechanical limited warranty LOK UNLOK SFI model available Indicator deadbolt available TL series heavy-duty deadbolts provide added security and are recommended by door hardware specialists for use in multi-unit housing or standard commercial applications. www.paramounthardware.com
TL SRIS BOLTS SPIFITION ll bored deadbolts shall be TL series. eadbolts shall meet the requirements of NSI 156.5, Grade 2. eadbolts shall be adjustable for 1 3/8 (35mm) to 1 3/4 (44mm) door thickness. eadbolts shall fit into a standard 2 1/8 (55mm) bore, 1 (25.4mm) deadbolt door-edge bore and 1 1/8 (28.5mm) x 2 1/4 (57mm) faceplate. eadbolts shall have a standard 2 3/4 (70mm) backset, 1 (25.4mm) throw and brass bolt with saw-resistant hardened steel insert. Strike shall consist of a standard 2-hole strike 1 1/8 (28.5mm) x 2 3/4 (70mm) and a dust box. eadbolts TL51 comes with a single cylinder deadlock and an inside thumbturn. eadbolt TL60 comes with double cylinder deadlock. eadbolt shall have a solid brass 6-pin tumbler cylinder with standard Schlage keyway and shall have a 3-hour UL listing for use on fire doors. eadbolts are non-handed and are supplied with all necessary mounting hardware. OPTIONL: 2 3/8 (60mm) and 5 (127mm) deadbolt backset, 4-hole strike for wood frame (9118). SIZ HRT & SLTION GUI MOL NUMBR QTY PR S WIGHT LBS / KG TL51 Single cylinder deadlock with inside thumbturn 3, 32 43.6 / 19.8 TL51 I Single cylinder deadlock with I and inside thumbturn 26, 32 44.0 / 20.0 20 B TL60 ouble cylinder deadlock 3, 32 58.2 / 2.4 SRIS B TL 2 9/16 (65) 1 5/8 (41) 1 1/8 (29) 1 1/16 (27) 1 3/8 to 17/8 (35 to 48) TL421 Privacy 26, 32 13.64 / 6.2 ORRING XMPL: TL SRIS 51-32 PRTS & SSORIS 9111* 2 hole strike for steel frame, 1 1/8 (29mm) x 2 3/4 (70mm) 9111NH* Blank strike, 1 1/8 X 2 3/4, NO HOL 9118* 4 hole strike for wood frame, 1 1/8 (29mm) x 2 3/4 (70mm) TL007 TL008 TL009 2 3/8 (60mm) backset deadbolt - TL51, TL60 2 3/4 (70mm) backset deadbolt - TL51, TL60 5 (127mm) backset deadbolt - TL51, TL60 9111 9118 BOLTS R5 08/13 26 Satin chrome 3 Polished brass 32 Satin stainless steel imensions unless specified otherwise are: Inches (Millimeters) * Special order / long lead
G3B SRIS YLINRIL LOKSTS Non-handed Standard backset 2 3/8 (60mm); adjustable to 2 3/4 (70mm) Standard solid brass 5-pin tumbler cylinder Schlage keyway oncealed mounting plate and screws For 1 3/8 (35mm) to 1 3/4 (45mm) door thickness Stainless steel 1/2 (13mm) deadlatch bolt throw Standard 1 (25.4mm) x 2 1/4 (57mm) faceplate Standard 1 1/8 (29mm) x 2 3/4 (70mm) strike vailable in a variety of standard functions asy installation for new construction or retrofit onforms to NSI 156.2 series 4000, Grade 3 1 year mechanical limited warranty G3B series cylindrical residential locksets are recommended by door hardware specialists for use in multi-unit housing. www.paramounthardware.com
G3B SRIS LOKSTS SPIFITION ll bored knob locksets shall be G3B series. Locks shall meet the requirements of NSI 156.2, Grade 3. G3B series ball locksets shall be adjustable for 1 3/8 (35mm) to 1 3/4 (45mm) door thickness. Locks shall fit standard 2 1/8 (55mm) cross bore (161 door prep). Latch bolt shall have standard 2 3/8 (60mm) backset, adjustable to 2 3/4 (70mm), with 7/16 (11mm) latch throw. Locks shall be non-handed and supplied with all necessary mounting fasteners. KYING: The G3B Grade 3 cylindrical locks are available in a standard Schlage keyway. SIZ HRT & SLTION GUI MOL NUMBR PR S WIGHT LBS / KG G3B 10 Passage 22.0 / 10.0 G3B 40 Privacy 22.0 / 10.0 B 3, 32 20 G3B 53 ntrance 28 / 12.6 SRIS G3B I 2 1/2 (64) B* 2 1/2 to 2 3/4 (64 to 68) 11/16 (17.5) I 2 (51) 1 3/8 to 1 3/4 (35 to 45) G3B 80 Storeroom 28 / 12.6 * imension depends on door thickness ORRING XMPL: G3B SRIS 10-32 R3 06/13 3 - Polished brass 32 Satin stainless steel imensions unless specified otherwise are: Inches (Millimeters)