Product Digest for. pressure and temperature measurement

Product Digest for pressure and temperature measurement

Mechanical Pressure Measurement WIKA Type 111.10/111.12, Type 212.54, and Type 111.25CT gauges are designed for applications where the measured media does not corrode brass, and long and reliable service under rugged conditions is required. Typical applications for these gauges are pumps, hydraulic and pneumatic systems, and compressors. Type 212.53/213.53, 232.53/233.53, and 132.53/133.53 are ideal choices for OEM and general industrial applications requiring an economical dry or liquid filled pressure gauge. When vibration and/or pulsation are present, the glycerine fill dampens the Bourdon tube and reduces wear on the gauge movement. Typical applications include hydraulic and pneumatic equipment. Type 111.10, 111.12 General Purpose Gauge, Dry Size 1½, 2, 2½, 3½, 4 black ABS plastic Wetted parts copper alloy snap-in-acrylic Accuracy ±3/2/3% of span Type 212.54 Size 2½ & 4 Bayonet ring - screw-on Wetted parts copper alloy laminated safety glass Accuracy ±1.0% of span Heavy Duty Service Field Liquid Fillable Type 212.53, 213.53 Stainless Steel, Brass Internals, Field Liquid Fillable Size 2, 2½, 4 polished - crimped-on Wetted parts copper alloy acrylic Liquid filling none (212.53); Glycerine (213.53) Accuracy ±2/1/2% of span Type 111.25CT Size 4½ Wetted parts copper alloy snap-in-acrylic Accuracy ±1.0% of span Contractor s Gauge Type 232.53, 233.53 Stainless Steel, Stainless Steel Internals, Field Liquid Fillable Size 2½, 4 polished - crimped-on Wetted parts 316 acrylic Liquid filling none (232.53); Glycerine (233.53) Accuracy ±1.5% of span (2½ ); ±1.0% of span (4 ) Type 132.53, 133.53 General Service Stainless Steel, Field Liquid Fillable Size 4 polished - crimped-on Wetted parts 316 acrylic Liquid filling none (132.53); glycerine (133.53) Accuracy ±3/2/3% of span 1

Mechanical Pressure Measurement With all construction, these industrial gauges ensure long service life in the harshest, most demanding environments. Typical applications include process, chemical and petroleum industries, power generation, pollution control equipment, and any other conditions requiring high quality, long lasting pressure measurement instrumentation. Type 232.54/233.54 Field Repairable, Field Liquid Fillable Size 2½, 4 Bayonet polished - screw-on Wetted parts 316 laminated safety glass Liquid filling none (232.54); glycerine (233.54) Accuracy ±1.5% of span (2½ ); ±1.0% of span (4 ) WIKA brass and liquid filled gauges are recognized worldwide as the standard of accuracy and durability for gauges in fluid power and hydraulic systems. These liquid filled gauges are ideal for use on compressors, pumps and any hydraulic systems which may produce excessive vibration and pulsation. Type 232.30, 233.30* Solid Front Safety Size 2½, 4 Bayonet ring Wetted parts 316 acrylic (2½ ), laminated safety glass (4 ) Liquid filling none (232.30); glycerine (233.30) Accuracy ±1.5% of span (2½ ); ±1.0% of span (4 ) *Note: 233.30 is a lower mount connection Type 213.40 Hydraulic Gauge Size 2½, 4 cast brass brass-plated ABS (2½ ); chrome-plated steel (4 ) Wetted parts copper alloy acrylic Liquid filling glycerine Accuracy ±1.5% of span (2½ ); ±1.0% of span (4 ) Type 23X.54PM Stainless Steel Construction Size 3½ 304 electropolished Wetted parts 316 acrylic Liquid filling glycerine (233.54PM) Accuracy ±1.0% of span (dry); + 1.5 of span (liquid filled) Type 212.20, 213.20 Large Diameter Hydraulic Gauge Size 6 Wetted parts copper alloy acrylic Liquid filling none (212.20); glycerine (213.20) Accuracy ±1.0% of span 2

Mechanical Pressure Measurement The large 6 diameter of Type 232.50/233.50 gauges makes them well-suited for applications that require dial reading from a distance. For applications with compact installation spaces, Type 131.11 1½ or 2 gauges may be ideal. Both models feature all construction for protection from harsh environments and corrosive process fluids. WIKA process gauges and hinged ring gauges are specifically designed for the petrochemical and processing industries. These gauges are engineered to deliver years of reliable service in rugged environments. Type 232.50, 233.50 Large Diameter Stainless Steel Gauge Size 6 Bayonet ring Wetted parts 316 laminated safety glass Liquid filling none (232.50); glycerine (233.50) Accuracy ±1.0% of span Type 2XX.34 Process Gauge Size 4½, 6 black fiberglass reinforced thermoplastic Wetted parts 21X.34- brass; 22X.34- steel; 23X.34-316 ; 26X.34- Monel threaded thermoplastic acrylic Accuracy ±0.5% of span Type 131.11 Size 1½, 2 Bayonet ring none Wetted parts 316 snap-in-acrylic Accuracy ±2.5% of span Small Diameter Stainless Steel Gauge Type 232.25 Hinged Gauge Size 4½, 6 black aluminum black steel, removable Wetted parts 212.25HR - copper alloy; 232.25HR - 316 ; 262.25HR - Monel Pointer adjustable flat glass Accuracy ±0.5% of span (ASME B40.100 Grade 2A) Type 612.34/632.34 Low Pressure Process Gauge Size 4½ black fiberglass reinforced thermoplastic Wetted parts 612.34 - brass; 632.34-316 acrylic Accuracy ±2/1/2% of span 3

Mechanical Pressure Measurement The WIKA Sealgauge is a reliable alternative to the conventional system of a diaphragm seal and pressure gauge. It uses a mechanical linkage, which eliminates the need for a system fill fluid. The Sealgauge is built to withstand the corrosive, highly viscous and crystallizing media (gaseous or liquid) typical of the process industry. It is especially well suited for petrochemical, pulp and paper, wastewater treatment, electric power plants, and low pressure applications. Extremely sensitive and highly accurate, the Type 611.10 and Type 632.50 capsule gauges are designed to measure very low pressure. They are especially well suited for systems where air or other gases are the measured media, testers, and other applications requiring exceptional sensitivity, precision, and reliability. Type 452.50 1 ASME 150# RF Flanged Connection Size 4 Upper housing 304 Bayonet ring 304 Diaphragm 316, PTFE lined Lower housing 316, PTFE lined laminated safety glass Liquid filling none Accuracy ±1.5% of span Type 611.10 General Service, Low Pressure Size 2½ black painted steel Wetted parts copper alloy snap-in-acrylic/zero adjustment screw on dial Accuracy ±1.5% of span Type 432.50, 433.50 All Stainless Steel Size 4 304 304, polished Diaphragm 316, PTFE lined Lower housing 316 laminated safety glass Liquid filling none (432.50); glycerine (433.50) Accuracy ±1.5% of span Type 632.50 All Stainless Steel, Low Pressure Size 4 Bayonet ring stainless Wetted parts 316 laminated safety glass/zero adjustment screw on dial Accuracy ±1.5% of span Type 422.12, 432.12 Cast Iron Size 4 cast iron black painted steel Diaphragm 422.12- <30 PSI 316 ; >30 PSI carbon steel 432.12-316 Lower housing carbon steel (422.12); 316 (432.12) instrument glass Accuracy ±1.5% of span 4

Differential Pressure Measurement Type 700.04 Dry or Liquid Filled This piston-style differential pressure gauge is designed for use with clean liquid or gaseous media where high differential pressure/static process pressures are required. The 700.04 is suitable for measuring pressure drops across a variety of devices, including filters, strainers, separators, and heat exchangers. Size 2½, 4½ & bezel reinforced plastic or aluminum Sensor housing 316L or anodized aluminum Wetted parts 316 & ceramic magnet acrylic or shatter-resistant glass DP range 0-5 PSID thru 0-100 PSID Working pressure up to 6000 PSIG (400 bar) Accuracy ±2% of span (increasing) Type 732.25 Dry or Liquid Filled This opposed membrane/liquid filled sensor element is designed for applications requiring high differential/high process pressures. The 732.25 is used in a variety of industrial uses, including rotating equipment systems and/or corrosive environments in liquid or gaseous media. Size 4½, 6 Bezel 316L Dial case black powder-coated aluminum Sensor housing 316L Sensor element PTFE; Halocarbon fill; Monel acrylic or shatter-resistant glass DP range 0-100 H 2 0 thru 0-600 PSID Working pressure 0-3000 PSIG (200 bar) Accuracy ±1% of span NACE NACE MR-01-75 compliant Type 700.05 Dry or Liquid Filled This diaphragm-style differential pressure gauge is suited for use in applications requiring low/medium differential and medium/high process pressure media. The 700.05 is intended for measuring pressure drops across filters, strainers, separators, heat exchangers, and gas recovery systems. Size 2½, 4½ & bezel reinforced plastic or aluminum Sensor housing 316L or anodized aluminum Wetted parts 316 & ceramic magnet acrylic or shatter-resistant glass DP range 0-50 H 2 0 thru 0-100 PSID Working pressure up to 3000 PSIG (200 bar) Accuracy ±2% of span (increasing), ranges 15 PSI thru 100 PSI; +5% of span (increasing), ranges 50 H 2 0 thru 300 H 2 0 Type 712.25DP/DX Differential/Duplex Gauge Size 4½, 6 black aluminum black aluminum, bayonet ring Wetted parts copper alloy Pointer one black (differential); one black, one red (duplex) flat glass DP range 0-15 PSID thru 0-1000 PSID Working pressure up to full scale value Accuracy ±2/1/2% of span (ASME B40.1 Grade A) Type 732.26 Dry or Liquid Filled This opposed membrane/liquid filled sensor element differential pressure gauge is for applications requiring medium differential/high process pressures. The 732.26 is typically used for a variety of industrial uses, including cryogenic gases and/or corrosive environments in liquid or gaseous media. Size 4½, 6 Bezel 316L Dial case black powder-coated aluminum Sensor housing 316L Sensor element PTFE; Halocarbon fill; 316L acrylic or shatter-resistant glass DP range 0-100 H 2 0 thru 0-400 PSID Working pressure 600 PSIG (40 bar) Accuracy ±1% of span 5

Pressure Accessories Type 910.12.100, 910.12.200, Pressure Snubbers 910.12.300 Pressure snubbers dampen pressure oscillations allowing easy reading of the average pressure. They also protect the gauge from damaging pulsations and spikes. Available in brass and 316 in porous, piston, and throttling types. Type 910.10 Gauge Cocks WIKA gauge cocks provide an economical method for isolating the instrument from the process. They also provide an adjustable flow orifice and are rated at 200 PSI. Type 910.11, 910.11.100, Needle Valves 910.11.200, 910.11.300 Needle valves isolate the pressure gauge from the pressure medium and act as a throttling device. They can also effectively dampen pulsation. WIKA s needle valves are available in standard, mini, block & bleed, and multi-port designs. Type 910.14.100 Pressure & Temperature Plugs Pressure & temperature plugs allow multiple process sampling ports. Equipped with a self-sealing pierceable rubber diaphragm and rated at 1,000 PSI and 200 F (350 F available). Type 910.13 Adjustable Overpressure Protectors Overpressure protectors prevent the pressure gauges from sudden spikes in pressure. The shut-off pressure point is adjustable from 50 PSI to 5,000 PSI. Available in aluminum, brass, and 316. Type 910.15.100, 910.15.200 Gauge Siphons Gauge siphons protect gauges from high temperature mediums such as saturated steam. The high temperature steam condenses in the siphon preventing it from damaging the gauge internals. Available in brass, steel or 316. For horizontal (coil) or vertical installations (pigtail). 6

High Precision & Calibration WIKA high precision and test gauges are extremely sensitive and highly accurate. They are ideal for instrument shops, gauge repair and calibration shops, testing laboratories and other applications demanding high precision and consistent results. These gauges feature a mirrored band on the dial to eliminate parallax reading errors. Type 342.11 ASME B40.100 Grade 4A Size 10 cast aluminum, dark grey cast aluminum, dark grey Connection 316 Bourdon tube Ni-span green tinted acrylic, non-reflecting Accuracy ±0.1% of span Type 312.20, 332.30 ASME B40.100 Grade 3A Size 6 Wetted parts 312.20 - copper alloy; 332.30-316 laminated safety glass Accuracy ±0.25% of span Type 332.34 ASME B40.100 Grade 3A Size 4½ black fiberglass reinforced thermoplastic fiberglass reinforced thermoplastic; black Wetted parts 316 laminated safety glass Accuracy ±0.25% of span Type 332.54 ASME B40.100 Grade 3A Size 4 Bayonet ring polished Wetted parts 316 laminated safety glass Accuracy ±0.25% of span 7

High Precision & Calibration WIKA has calibration equipment available for temperature or pressure, mechanical or electronic, field use, or use in metrology labs. With EN and N.I.S.T. traceable products, WIKA can provide the required equipment to maintain metrology and calibration laboratories. Type 65-2000 Accuracy Range Pressure units Pressure overload capability Digital Pneumatic Calibrator 0.02% of reading + 3 digits (including linearity, hysteresis and temperature error) -10...100 PSI (-0.7...7 bar) PSI, mbar, bar, kpa, mhg, mh 2 O (4 C), "Hg, "H 2 O (20 C) up to -10...100 PSI (2 times) Type CPG8000 Modular Sensor System Accuracy <0.01% FS and IP 41 4 to 40,000 PSI Sensors 1...4 Keyboard membrane keyboard Evaluation unit Motorola 50 MHz powerpc-board Operating System s CE Digital Interface RS-232 and IEEE-488.2 Relay Outputs 8 programmable change-over contacts Type DPR-20C Accuracy 0.03% of span from 0...1.5 PSI -14.7...300 PSI from 0...100mbar to -1...20bar Pressure Controller Type 65-2000 II Digital Pressure Calibrator Range -10..0..100 PSI~ (-0.7...7 bar) Sensor type differential pressure (max. 100 PSI static) Units mbar, bar, kpa, mmhg, PSI, in. H 2 0 (20 ) Voltage measurement 0...+ 32 V DC Current measurement 0...+ 32 ma DC Transmitter supply 24 V DC + 5%; max. 30 ma (galv. isolated max. 500 VDC) Pneumatic precision pressure regulator (for external pressure supply); pressure hand pump with volume controller for stand alone pressure supply Type DPE 750 Digital Pressure Electronic Controller The DPE 750 is a universal test and calibration unit for the maintenance and calibration of pressure gauges and transmitters. It is designed for workshop and laboratory calibration, as well as field operation. The DPM 200 Digital Panel Manometer is panel-mounted into the DPE 750. Type Diptron 3 Plus Accuracy 0.04% of span from 0...1.5 PSI -14.7...3000 PSI from 0...100mbar to -1...200bar Digital Pressure Gauge 8

Electronic Temperature Measurement Type T-19 Analog Transmitter Analog transmitters offer an economical solution to most transmitter applications. A choice of inputs are available for 100 Ohm Platinum RTD or any one of eight thermocouple types. The T-19 has user selectable ranges and potentiometers for adjustment. Inputs RTD: Platinum 100 Ohm, alpha 0.00385 thermocouple: J, K, N, T, E, R, S, B Accuracy ±0.1% of measurement range Type T-23 Digital Transmitters The T-23 digital temperature transmitter converts thermocouple inputs to a linearized 4-20 ma signal. It features a full galvanic isolation and thermocouple break protection. This transmitter withstands shock and vibration in harsh industrial environments. Inputs Accuracy thermocouple: J, K, N, T, E, L, U, R, S, B, W3, W5 thermocouple: (per DIN IEC 770, 23 C or 0.05% FS or ±010%µv Type T-24 Analog Transmitter The T-24 combines the timely response of an analog transmitter with the configurable flexibility of a s PC. The T-24 is suited for applications in the machine industry and plant construction. Inputs measuring range configurable with s PC Basic configuration 3 wire 0... 150 C Type T-12, T-32 Digital Transmitters Digital transmitters feature the flexibility of input and range programming combined with high accuracy. The input is programmable for 100 Ohm Platinum RTD or any one of 11 thermocouple types. The 4-20 ma output is isolated and linearized to the temperature input. The T-32 has HART protocol for programming and communications. Inputs RTD: Platinum 100 Ohm, alpha 0.00385 thermocouple: 11 types; millivolt: 800 mvdc; resistance: 5K Ohm Accuracy RTD: (per DIN IEC 770, 23 C, ±5 C) ±0.2 C thermocouple: (per DIN IEC 770, 23 C, ±5 C) Types J, K, T, E, N, L, U: ±1.0 C Types R, S, B, W5: ±2.0 C Isolation 1500 VAC Dimensions 1.95 dia. (49.5mm), 1.12 ht. (28.5mm) Type TE-19.30, T-32.30, T-12.30 These transmitters have all the features of the complete head mounted DIN Rail Transmitters transmitter, except for a convenient DIN rail package. Typically mounted in electrical enclosures, the DIN rail transmitters provide signal conditioning for PLC and data acquisition applications. Type T-42 Profibus DP Compatible T-42 has Profibus protocol capability for Profibus-PA bus systems and is compatible with RTDs, thermocouples, resistance sensors, and millivolt sensors. The T-42 is also intrinsically safe and CE approved. Inputs RTD: platinum or nickel, 100 Ohm thermocouple: 10 types millivolt: -400 to 1200mV resistance: 5K Ohm Accuracy RTD: (per DIN IEC 700, 23 C, ±5 C) ±0.8 C thermocouple: (per DIN IEC 700, 23 C, ±5 C) Types J, K, T, E, N, L, U: ±1.0 C Types R, S, B: 2.0 C Isolation 1500 VAC Dimensions 1.95 dia. (49.5mn), 1.12 ht. (28.5mm) 9

Electronic Pressure Measurement Type N-10, N-11 Non-Incendive The N-10 is FM approved non-incendive for Class I, Division 2, Groups A, B, C, and D. It features a ½ male conduit electrical connection, NACE listed wetted parts, NEMA 4 / IP 67 weather protection, and excellent vibration resistance. 50 INWC to 15,000 PSI, vacuum, compound, absolute Output 4-20 ma or 1-5V low power Accuracy 0.25% B.F.S.L. Type LH-10, Intrinsically Safe LS-10, IL-10 Submersible level transmitters have a watertight package suitable for applications in tank level measurement, water/wastewater treatment, and reservoir or well depth measurement. They are submersible to 1,000 feet. 50 INWC to 400 PSI Output 4-20 ma Accuracy 0.25% - 0.125% B.F.S.L. Type IS-10, Intrinsically Safe IS-11, IF-10 Intrinsically safe transmitters are for applications requiring Class I, Division 1 protection in hazardous environments. IS-10 are industrial grade FM approved transmitters. IS-11 transmitters feature a nonclogging flat sensor for use with media containing particulates for pressure to 8,000 PSI. IF-10 transmitters have a NEMA 4X integral junction box for use in wet, corrosive environments. 50 INWC to 60,000 PSI, vacuum, compound, absolute Output 4-20mA 2-wire Accuracy 0.25% B.F.S.L. UT-10 UniTrans The UniTrans has a turndown capability of 20:1, 0.15% accuracy, an integral temperature sensor, and is available with a HART communications interface. 0-5 PSI to 0-15,000 PSI Output 4-20 MA 2-wire Accuracy 0.15% B.F.S.L. (before turndown) Attachable Loop Powered Local Indicator Type E-10, E-11 Explosion Proof The E series transmitters are FM Approved explosion proof for Class I, Division I locations. 50 INWC to 15,000 PSI, vacuum, compound, absolute Output 4-20 ma or 1-5V low power Accuracy 0.25% B.F.S.L. Attachable Loop Powered Local Indicator Display -1999 to +9999 user-programmable Power loop powered with 3 VDC drop Application for use with WIKA industrial and Eco-Tronic pressure transmitters with DIN plug 10

Electronic Pressure Measurement Type S-10 Standard Industrial Pressure Transmitters These rugged pressure transmitters are designed for use in harsh environments where accuracy, reliability, and repeatability are critical. Applications include hydraulics and pneumatics and numerous other processing operations. 50 INWC to 40,000 PSI, vacuum, compound, absolute Output 4-20 ma 2-wire, 0-5 V 3-wire, 0-10V 3-wire, 0-100 mv 4-wire Accuracy ±0.25% B.F.S.L. Profibus DP-Interface The Profibus DP (EN 50170) interface compatible pressure transmitter enables rapid data transmission rate of up to 12 Mbit for automation and test bench applications. Accuracy of 0.1% is standard. The transmitter features built-in diagnostic routines as well as no temperature error between 0 and 122 F. 0-5 PSI to 0-15,000 PSI Output Profibus DP (EN 50170) Accuracy ±0.1% B.F.S.L. Type S-11 Flush Diaphragm Pressure Transmitters The S-11 flat diaphragm pressure transmitters are designed for use with sludge, slurry, or high viscosity media. 50 INWC to 8,000 PSI, vacuum, compound, absolute Output 4-20 ma 2-wire, 0-5 V 3-wire, 0-10V 3-wire, 0-100 mv 4-wire Accuracy ±0.25% B.F.S.L. Type HP-1 High Pressure Transmitter The new HP-1 is designed for ultra-high pressure monitoring and control applications up to 120,000 PSI. It provides accurate, reliable and safe performance when exposed to rapid pressure changes. Type S-10-3A 3A Sanitary 3A transmitters for food and pharmaceutical pressure monitoring applications are available in ranges from 50 INWC to 1,000 PSI with 1½ or 2 Tri-Clamp connections. They meet 3A criteria and are available with cooling extensions for high temperature applications. 15 PSI to 1,000 PSI vacuum, compound Output 4-20mA, 0-5V Accuracy < 0.5% B.F.S.L. Type SA-11 Output Accuracy Low Pressure 3A Sanitary 100 INWC to 100 PSI, vacuum, compound 4-20mA < 0.25% B.F.S.L. Type P-10 High Precision Digital WIKA high precision pressure transmitters provide accuracies as high as <0.05% of span and have no temperature error between 0 and 122 F. They are suitable for applications in the laboratory as well as harsh industrial environments. 13 11

Electronic Pressure Measurement Type C-10 OEM Pressure Transmitter WIKA OEM pressure transmitters are specifically designed to meet price and performance requirements of Original Equipment Manufacturers. They feature a highly stable, temperature compensated, conditioned output signal, and are designed for long service life. OEM applications include hydraulics, pneumatics, compressor control, off-road equipment and industrial engine control. Output Accuracy 100 INWC to 15,000 PSI, gauge or absolute 4-20 ma 2-wire, 0-5 V 3-wire, 0-10 V 3-wire <0.5% B.F.S.L. Type M-10 Micro-Tronic With a case length (including hex) of just 1.7 and a diameter of.75, the Micro-Tronic is one of the world s smallest industrial pressure transmitters for embedded OEM sensor applications. The Micro-Tronic is CE approved. 0-500 PSI to 0-15,000 PSI Output 4-20 ma 2-wire, 0-5 V 3-wire, 0.1-10V3-wire Accuracy ±.25% B.F.S.L. Type CAN-Interface OEM & Open Transmitter The CAN-interface transmitter is available with CAN OEM protocol compatibility. With a baud rate of 1 megabit, a 5 msec capture rate is possible for rapid acquisition of measurement cycles. High shock and vibration capability allow for tough applications such as mobile hydraulic, machine tools and test equipment. 0-5 PSI to 0-22,000 PSI Output CAN (DIN / ISO 11898) Accuracy ±0.25% B.F.S.L. Type Eco-Tronic Eco-Tronic transmitters provide a conditioned high level 4-20 ma or 0-10 V output. All have CE certification and meet stringent RFI protection requirements. They are suitable for many general purpose and OEM pressure measurement applications. 15 PSI to 15,000 PSI Supply Voltage 10 to 30 VDC (14 to 30 VDC) Output 4-20mA (0-10VDC) Accuracy < 0.5% B.F.S.L. Type MH-1 Mobile Hydraulic Transmitter The MH-1 is a rugged transmitter designed for the most demanding applications in the mobile hydraulic industry. Outputs include 4-20 ma or 1-5 V 3-wire signals. Shock resistance of 1,000g and vibration to 50g assures continued performance in the toughest applications. Available with IP-69K environmental protection for high pressure steam washdown. Sensor is countersunk into the process connection to prevent media leaks in the event of a damaged transmitter or shear of the transmitter body. 0-1,000 PSI to 0-10,000 PSI Output 4-20 ma 2-wire, 1-5 V 3-wire Accuracy ±0.5% B.F.S.L. 12

Diaphragm Seals WIKA diaphragm seal systems enable pressure gauges, transmitters, transducers, and switches to be adapted for installation into adverse applications. Diaphragm seals are excellent for applications involving high temperature, corrosive, toxic, abrasive and highly viscous media and offer a wide variety of exotic materials to ensure complete compatibility with most processes. Diaphragm seals can be assembled to the pressure measuring instrument directly or remotely through the use of a capillary. Seals are used extensively in industries such as petrochemical, chemical, and gas facilities, oil refineries, pulp and paper mills, food and dairy processing, water and sewage treatment, and pharmaceutical facilities. Type L990.10/12 Instrument connection Process connection Pressure rating Suitable pressure Wetted parts Standard Version ¼ or ½ NPT female, capillary threaded: ¼ to 1 NPT female flanged: ½ to 2 RF threaded: up to 3675 PSI flanged: 150# to 1500# per ASME B16.5 15 PSI to 3675 PSI CS, SST, Monel, Hastelloy, Teflon lining, Tantalum, other consult factory Type L910.ZA Instrument connection Process connection Pressure rating Suitable pressure Wetted parts Saddle Seal ¼ or ½ NPT female, capillary 3 pipe and up 1,500 PSI 15 PSI to 1,500 PSI SST, other consult factory Type L990.27 Instrument connection Flange-Type Flush ¼ or ½ NPT female, capillary Process connection flanged: 2 to 4 RF Pressure rating flanged: 150# to 2500# per ASME B16.5 Suitable pressure 10 in H 2 0 to 2500# per ASME B16.5 Wetted parts SST, Monel, Hastelloy, Teflon lining, Tantalum, other consult factory Type M93X.D1 All-Welded System Size 4½ fiberglass reinforced thermoplastic Wetted parts 316L, Monel, HastelloyC-276 acrylic Process connection ½ NPT male System fill fluid silicone, DC200-10 Accuracy +0.5% of span Type L981.10 INLINE SEAL Instrument connection ¼ or ½ NPT female, capillary Process connection flanged: 1 to 8 RF; wafer Pressure rating flanged: 150# to 2500# per ASME B16.5 Suitable pressure 10 PSI to 6,000 PSI Wetted parts SST, Monel, Hastelloy, Teflon coated, Tantalum, other consult factory 13

Diaphragm Seals Sanitary seals are designed to facilitate ease of assembly and disassembly from its mating fitting. The most common sanitary seal and mating fitting are held together via a clamp to minimize impurities entering the process during the removal and reinstallation of the seal. The sanitary seal Tri-Clamp construction meets the criteria set by 3A. Sanitary seals are designed for applications in the pharmaceutical, and food & beverage industries. Type L990.22 Instrument connection Process connection Pressure rating Suitable pressure Wetted parts Sanitary ¼ or ½ NPT female, capillary 1½ to 4 Tri-Clamp 600 PSI 15 PSI to 600 PSI SST, other consult factory Type M93X.25 Field Fillable Size 2½ polished polished, crimped Wetted parts 316L polycarbonate Process connection ¾ Tri-Clamp Accuracy +2/1/2% of span Type L981.22 Instrument connection Process connection Pressure rating Suitable pressure Wetted parts INLINE SEAL TM Sanitary ¼ or ½ NPT female, capillary ¾ to 4 Tri-Clamp 600 PSI 15 PSI to 600 PSI SST, other consult factory Type M93X.2A Field Fillable Size 2½, 4 Wetted parts 316L polycarbonate Process connection 1½, 2 Tri-Clamp ; lower or back mount Accuracy +1.5% of span (2½ ), +1.0% of span (4 ) Type M932.2C Size 1½, 2 polished, press-fit Wetted parts 316L glass Process connection ¾ Tri-clamp, lower or center back mount Accuracy +3/2/3% of span 14

Mechanical Temperature Measurement Type 30, 31, 32, Process Grade 50, 51, 52 Bimetal Thermometers WIKA bimetal process grade thermometers are suitable for nearly every direct-reading thermometer application. Their durable construction and finish ensure reliable readings and long-lasting service. The superior quality of the WIKA Type 30, 31, 32, 50, 51, 52 is reflected in the 7-year warranty. Size 3, 5 & stem 304 Stem lengths 2½ to 72 configuration back-connected, bottom-connected, adjustable angle Connection ½ NPT on 3 and 5 dials (std.) flat instrument glass Dial white aluminum; anti -parallax Pointer black aluminum Accuracy ±1.0% of span ASME B40.3 Grade A Scale dual F/ C; single F or C -100 F(-70 C) to 1000 F(500 C), in dual scale F&C, Fahrenheit only or Celsius only External reset a slotted hex adjustment head offers screwdriver or wrench use to field calibrate the thermometer Fill policy WIKA does not recommend use of filled instruments continual use at operating temperatures above 400 F(204 C) or below -100 F(-70 C) Pressure pressure rating on WIKA standard ¼ stem thermometers (¼ O.D.x.020 wall tubing) is 1450 PSI working external pressure Hermetic seal hermetically sealed per ASME B40.3. Guaranteed Immersion not to fog for accurate temperature readings, immerse stem a minimum of 2 in agitated liquid or 4 in moving air or gas Options silicone fill; min-max pointer; 3/8 stem; 316 wetted parts Type 20, 33, 34, Industrial Grade 53, 54 Bimetal Thermometers WIKA s industrial grade bimetal thermometers are ideal for a weather resistant application or where a tamper-proof thermometer is recommended. The WIKA Type 20, 33, 34, 53, 54 are warranted for one year. Size 2½ to 24 & stem 304 Stem lengths 2½ to 72 configuration back-connected, bottom-connected, adjustable angle Connection ½ NPT on 3 and 5 dials; ¼ NPT on 2 dials standard; others available flat instrument glass Dial white aluminum; anti -parallax Pointer black aluminum Accuracy ±1.0% of span ASME B40.3 Grade A Scale dual F/ C; single F or C -100 F(-70 C) to 1000 F(500 C), in dual scale F&C, Fahrenheit only or Celsius only Pressure pressure rating on WIKA standard ¼ stem thermometers (¼ O.D.x.020 wall tubing) is 1450 PSI working external pressure Hermetic seal hermetically sealed per ASME B40.3. Guaranteed not to fog Immersion for accurate temperature readings, immerse stem a minimum of 2 in agitated liquid or 4 in moving air or gas TI.T17, TI.T20 Laboratory Thin Stem Thermometers WIKA laboratory/thin stem thermometers deliver fast, extremely accurate readings. They are high-quality, economical thermometers designed for laboratory and OEM applications. Size 1¾, 2 & stem 304 Stem lengths 5, 8, 12, 18 Connection plain, 7/16 hex hub with no threads flat instrument glass Dial white aluminum Pointer black aluminum Accuracy 1.0% full scale value Scale dual F/ C; single F or C -100 F (-70 C) to 1000 F(500 C), in dual scale F&C, Fahrenheit only or Celsius only External reset Options externally adjustable on plain connection stem lengths, threaded connections, scales and dial markings, Lexan window, beaker clip, stem tip 15

Mechanical Temperature Measurement Industrial Glass Thermometers WIKA s industrial glass thermometers offer easy-to-read temperature measurement in tough applications. Their molded housings offer excellent rigidity and impact resistance, and the glass tube is mounted to resist shock. Features guaranteed accuracy to within 1% of scale; spring mounted glass window to reduce rattles 7 & 9 completely adjustable locking case & stem; to 550 F (288 C) in Fahrenheit, Celsius, and Dual Scale; blue (non-mercury) liquid standard. Available with or without thermowell 6 available with brass dual-threaded thermowell socket that fits both ½ and ¾ NPT; 40 F (-40 C) to 400 F(200 C) in Fahrenheit, Celsius, and Dual Scale. 300 F (150 ) max with red mercury fill; spirit fill available. Solar Powered Digital Thermometer WIKA s solar powered digital thermometer is the ideal instrument where exact readings are required, such as a pilot plant or a Research & Development application. Type TI.80 - back connected; TI.82- adjustable angle & stem 304 Lens glass Connection Sensor ½ NPT ceramic thermister requiring 35 lux to operate the 3-volt solar cell Solar Industrial Thermometer WIKA solar industrial thermometer is an excellent alternative to mercuryin-glass. It eliminates toxic mercury and offers fast, accurate, easy-toread temperature indications. Retro-fit design is a drop-in replacement for glass Range thermometers. -50/300 F (-50/150 C) Accuracy 1% of reading 1 Sensor glass passivated thermistor Lux Rating 10 Lux (one foot candle) Gas Actuated Thermometers WIKA gas actuated dial thermometers are easy-to-read and provide excellent performance throughout their ranges. They are excellent when extremely accurate temperature readings are needed from remote locations or mercury-sensitive environments. Dial 4½ and 6 connection front flange, back flange, u-clamp, phenolic turret, direct reading adjustable angle Connection variety of connection systems Capillary lengths to 99 Options -320 F(-200 C) to 1200 F(650 ) bendable extensions up to 18 with sliding union; copper bulb, capillary & braided armor; bulb; capillary & spring armor; interlocking armor; acrylic or shatterproof glass window; min-max pointer; red set hand Vapor Actuated Thermometers Where critical measurement is within a limited range, a WIKA vapor actuated thermometer is ideal. Rugged and reliable, these instruments are well-suited for refrigeration, drying ovens, and plating applications. Dial 2, 2½, 3½, 4½ connection front flange, back flange, u-clamp Connection plain, threaded union, thermowell Capillary lengths to 99-40 F(-40 C) to 350 F(176 C) Options copper bulb, capillary & braided armor; or bulb, capillary interlocking armor available 16

Mechanical Temperature Measurement Twin-Temp WIKA s unique Twin-Temp thermometer combines the accuracy, reliability and easy-to-read dial of a bimetal thermometer with the precision readout and data acquisition capability of a thermocouple or RTD sensor. Every thermowell in your process can have two sensors. Size 3 and 5 adjustable angle case or back-connected case Stem ¼ O.D. Length T/C 2½ to 48 ; RTD 4 to 48 Connection Range ½ NPT -100 F(-70 ) to 550 F(260 C) in Fahrenheit, Celsius, and dual scale. Type K thermocouple or 100 Ohm RTD is standard. Types J, E, and T are optional. Type TI.1005 Pocket Test Type TI.1005 is a bimetal dial thermometer requiring no power to deliver its quick, accurate readings. The 1" dial is easy-to-read. Stem length is 5. Thermometer includes pocket case which can be used to hold the stem. Accuracy +1% of full scale Stem.142 diameter Length 5 Range -40/160 F; 0/220 F; 50/550 F Pointer aluminum with matte red finish Type TI.1006DW Digital Pocket Test Type TI.1006DW is a water-resistant, impact-resistant digital pocket thermometer offering both Fahrenheit and Celsius readings, with a unique data hold feature that "remembers" the last reading. Range is from -40 to 300 F and -40 to 150 C. Battery is included. Accuracy +1% of full scale plastic Stem.157 diameter Length 3 Range -40/300 F (-40/150 C) switchable Power battery 17

Mechanical Temperature Measurement Thermowells Thermowells for temperature instruments are recommended for all processes where measurement is of a corrosive medium. WIKA thermowells are available from a complete selection of base materials, as well as shields and coatings, and in threaded, flanged, welded, and sanitary connections. WIKA thermowells are offered in.260 and.385 bores. WIKA sanitary thermowells meet the criteria for USDA and 3A sanitary standard 09-09 requirements. WIKA also manufactures thermowell conversion kits to adapt different thermowells to new types of thermometers. Process connections threaded, flanged, welded, sanitary Instrument connection ½ NPSM standard Shank configurations stepped, straight, tapered Bore diameter.260,.385 Materials brass, AISI 304, AISI 316 (other materials available) Surface finish brass: 60-100Ra; AISI 304 & AISI 316: 16-32Ra; sanitary (AISI 304 & 316): 16-32Ra TI.TSG60 Temperature Switch Gauge WIKA s temperature switch gauge offers a combination of industrial strength performance with unmatched precision. The TI.TSG60 has a rugged case which holds up to four single pole, double throw 10 amp switches for a variety of switching actions. Size 6¼ 304 ; bottom connected back flange Switch rating Lexan 10 amp@125/250 VAC, non-inductive; 5 amp@120 VAC, inductive; ½ amp @125 VDC, noninductive; ¼ amp @ 250 VDC, non-inductive Switch connection terminal block for 1 and 2 switch models; Amphenol connector for 3 and 4 switch models Switch differential equal to 2-3% of span Connection 3/8 x 3 316 bulb with 12 or 18 bendable extension, and ½ NPT one-time compression fitting Range 50% up to 500 F, except 10% on 0-120 C and 0-250 F Thermogauges The thermogauge is a combination of both a pressure gauge and bimetal thermometer into one, compact instrument. Popular for pressure and temperature measurement in hot water and commercial boilers, this product consists of a Bourdon Tube and a bimetal helix for pressure and temperature measurement. Size 2½ (CBM only), 3¼ (CBM & LM) & stem case-black painted steel; stem-copper alloy Stem lengths 7/8 thru 2 Accuracy +3% FS 0/55 & 0/60 PSI/ftH2O (feet of water) pressure (model specific)70/250 F Temperature Working range Steady: ¾ X full-scale value; Fluctuating: 2/3 X full-scale value; Short Time: full-scale value 18

As the world s leading manufacturer of pressure and temperature instrumentation, WIKA Instrument Corporation combines U.S. manufacturing with a global network of subsidiaries to deliver the most extensive product line in the industry. Located just outside of Atlanta in Lawrenceville, Georgia, WIKA s 210,000 square foot facility features state-of-the-art manufacturing technology and highly automated proprietary production equipment. Additionally, WIKA has manufacturing facilities in Germany, Brazil, South Africa, China, India, Switzerland, and Canada. Since 1946, WIKA has been recognized for being innovative and supplying quality products. Annually, WIKA produces over 30 million gauges, diaphragm seals, transmitters, and thermometers worldwide. WIKA maintains a nationwide network of over 110 full capability distributors who offer product application expertise and an extensive inventory of pressure and temperature products. WIKA's dedication to improving products and services is seen in continuous product engineering and development. The result is the highest quality, longest lasting instruments available designed to meet or exceed customers requirements. To find your nearest WIKA distributor, call toll-free 1-888-WIKA-USA WIKA Instrument Corporation 1000 Wiegand Boulevard Lawrenceville, Georgia 30043 Toll Free 1-888-WIKA-USA TEL (770) 513-8200 FAX (770) 338-5118 website: www.wika.com e-mail: info@wika.com copyright 11/02 D001