Small Engine Parts & Accessories FEATURES OF THE BANTA OIL FILTER > Metal Shell > Relief Valve Assembly (relief valve opens when necessary to provide engine with oil under all conditions). > Anti-Drain Back Valve (Anti-drain back valve prevents oil from draining out of the fi lter during engine shutdown). > Metal End Cap - both top & bottom (Metal end caps and thermo setting adhesive provide positive seals). > Resin Impregnated Paper Filter Medium (Cured resin impregnated paper removes harmful foreign particles). > Lid Assembly (Lid assembly is roll seamed to the shell which provides a leak-tight assembly). Part# O.E.M Application Part# O.E.M Application 12-92 B&S# 499532 / 692513 / 82314 Club Car# 4116467 Cub Cadet# 49211 Cushman# 833438 / Gravely# 43594 Gravely# 2777 / 21486 / 215279 John Deere# AM1154 / AM17423 Generac# 7185 Kawasaki# 4965-257 / 4965-262 Kawasaki# 4965-271 / 4965-278 Kees# 363312 / Onan# 122737 Snapper# 7-7355 / Tecumseh# 36262 Toro / Wheel Horse# NN1684 Woods# 72859 -----------> ---------------------> --------------------> -----------------> OIL FILTERS - BUY THE SHOP PACK AND SAVE Metal Shell Relief Valve Assembly Resin Impregnated Paper Filter Medium Anit-Drain Back Valve 12-91 Ariens# 21558 B&S# 4154 / 49256 / 492932 / 492932S B&S# 549 / 576 / 696854 / 695396 B&S# 842921, E-Z-GO# 492932S Husqvarna 531 3 7-43 / 531 3 73-89 John Deere# AM119567, LG492932S Kawasaki# 4965-72 / 4965-77 Kohler# 25 5 1 / 28 5 1S Tecumseh# 36563 / 36961 Toro# 17-7817 OIL FILTER SHOP PACK (12) of our 12-634 oil fi lters. > 9 to 12 PSI pressure relief > anti drain valve > 3/4-16 thread > 2-11/16 OD X 2-15/16 HT > 28 Micron 12-94 Cub Cadet# CC1258, Gravely# 213972 John Deere# AM125424 / KH1258 / GY2577, Kohler# 12 5 1 / 12 5 1S, Woods# 782 OIL FILTER SHOP PACK (12) of our 12-485 oil fi lters. > 7 to 9 PSI pressure relief > anti drain valve > 3/4-16 thread > 3 OD X 2-5/16 HT > Seal OD: 2-13/16 > 28 Micron 12-93 B&S# 4153 / 49156 Case# (ingersoll) C26191 Gravely# 42366, John Deere# AM1127 Kohler# 52 5 2, Onan# 122 645 Woods# 7939 Toro / Wheel Horse# NN1147 OIL FILTER SHOP PACK (12) of our 12-523 oil fi lters. > 8 to 11 PSI pressure relief > anti drain valve > 3/4-16 thread > 3 OD X 2-3/4 HT > 27 Micron OIL FILTER SHOP PACK (12) of our 12-345 oil fi lters. > 8 to 11 PSI pressure relief > anti drain valve > 3/4-16 thread > 3 OD X 3-1/4 HT > 27 Micron 38-1
Small Engine Parts & Accessories ARIENS OIL / TRANSMISSION FILTERS & ACCESS BRIGGS & STRATTON 12-485 2155 / 21558 For 5 Hp Vanguard engines. Fits models 147, 2617, 297, 2947, 337 and 357; - 7 to 9 PSI pressure relief - 3/4-16 thread X 3 OD X 2-5/16 HT, 2-13/16 Seal OD, ; (Vanguard models small version fi lter) NOTE: SAVE SHOP PACK of 12 available - Banta Saw order# 12-91 12-519 31928 / 31928 Bolens# 1719859 Bolens# 172645 For most Tractors with hydrostatic transmissions;. - Size: 3/4-16 thread X 3-13/16 OD X 3-23/32 HT; - Mounting seal OD: 2-13/16 ; Anti drain valve, 28 Micron. BOBCAT 12-51 4845B For XM Hydro series & 7 series. -8 to 11 PSI pressure relief. - 3/4-16 thread X 3-13/16 OD X 2-3/4 HT; - Anti drain valve; 16 Micron. (While Quantities Last) For BOLENS - see ARIENS and TROY BILT BRIGGS & STRATTON 12-485 4154 / 549 / 576 / 492932 492932S / 49256 / 695396 549 / 576 / 695396 696854 / 842921 For 5 Hp Vanguard engines. Fits models 147, 2617, 297, 2947, 337 and 357; - 7 to 9 PSI pressure relief - 3/4-16 thread X 3 OD X 2-5/16 HT, 2-13/16 Seal OD, ; (Vanguard models small version fi lter) NOTE: SAVE SHOP PACK of 12 available - Banta Saw order# 12-91 12-345 4153 49156 / 49156S For most Vanguard series and twin cylinder engines. Fits models: 267, 2617 & 297. - 3/4-16 thread X 3 OD X 3-1/4 HT, (Vanguard models large version fi lter) NOTE: SAVE SHOP PACK of 12 available - Banta Saw order# 12-93 12-634 3314 / 499532 692513 / 82314 Generac# 7185 Found on Briggs Generac models. For 6.5 Hp Intek Pro model engines. Models 1226 and 1236. - 9 to 12 PSI pressure relief - 3/4-16 thread X 2-11/16 OD X 2-15/16 HT,. Mounting seal: 2-1/2 OD;, NOTE: SAVE SHOP PACK of 12 available - Banta Saw order# 12-92 12-5 79599 Fits models: 121Q72, 121S72, 121S75, 121S77, 12Q972, 12S972 and 12S975. - 3/4-16 thread X 1.9 OD X 2-1/4 HT, - Mounting seal OD: 1-13/16 Seal OD, 3/4-16 thread. 125-211 66768 / 281685 John Deere# M47797 Tecumseh# 27625 Oil Fill Plug For most Briggs and Stratton, Clinton and Tecumseh engines with angled oil fi ll neck. Made of nylon. 125-225 691913 28485 28181 Oil Plug with built in Dipstick. (While Quantities Last) Fits 4 Hp vertical shaft engines. Models: 1149-114995. 125-218 28663 Oil Plug with dipstick For B&S Quantum engines. 125-413 68838 28137 85259 Oil Grommet For 7 & 11 Hp horizontal, 12 & 13 Hp vertical & Vanguard V-Twin horizontal engines with extended plastic dip sticks. 125-294 92738 / 69289 Magnetic Oil Plug Size: 3/8-18 pipe thread. 125-32 94174 94687 / 691663 Magnetic Oil Plug Size: 1/4-18 pipe thread. 125-23 296768 / 692939 (Sold in Multiples of 5) (Sold in Multiples of 5) Oil Minder Gauge For Briggs, Clinton and Tecumseh engines. Permanently replaces oil fi ller plug with the oil minder. Press rubber bulb and release. If oil can be seen, oil level is OK. 38-2
Small Engine Parts & Accessories CASE EXMARK & FERRIS cont. 12-345 C26191 X 3 OD X 3-1/4 HT. (Vanguard models large version filter) NOTE: SAVE SHOP PACK of 12 available - Banta Saw order# 12-93 CUB CADET 12-523 CC1258 For Cub Cadet 15 and 2 series lawn tractors with Kohler engines. - 3/4-16 thread X 3 OD X 2-3/4 HT NOTE: SAVE SHOP PACK of 12 available - Banta Saw order# 12-94 12-53 751-1151 751-1269 951-1269 Fits MTD 4P9HU, 4P9JHA, 4P9JU, 4P9JUA, 4P9JUB, 4P9MU, 4P9MUA, 4P9MUB engines on riding mowers. Measures: 3/4-16 thread, 2-1/8 HT X 2-5/8 OD. 12-519 723-314 / 923-314 759-365 Cushman# 111836 IH# 395789-R2 For Cub Cadet models: 125, 145 and 1862. - Mounting seal OD: 2-13/16 - Anti drain valve, 28 Micron. X 3-13/16 OD X 3-3/4 HT. DIXON & ENCORE 12-634 Ferris# 521334X1 For 6.5 Hp Intek Pro model engines. Models 1226 and 1236. - 9 to 12 PSI pressure relief - 3/4-16 thread X 2-11/16 OD X 2-15/16 HT,. Mounting seal: 2-1/2 OD;, NOTE: SAVE SHOP PACK of 12 available - Banta Saw order# 12-92 12-361 Exmark# 513211 Exmark# 1-513211 Ferris# 152681 Ferris# 1719168 Ferris# 2228 Ferris# 52228 Ferris# 52228X1 Fits models 51, 52, 551, 5421 and 561. - 18 PSI pressure relief; - 3/4-16 thread X 3 OD X 3-1/2 HT, - Mounting seal OD: 2-3/4, 1 Micron 12-71 Exmark# 13-2146 Ferris# 1521357 Ferris# 521357 Fits Exmark models: Front Runner and Lazer Z. Most Ferris Zero Turn mowers. - 1-12 thread X 3-3/4 OD X 5-1/4 HT, - Anti drain valve, 1 micron. 12-519 Ferris# 522883X11 12-361 Dixon# 5565 / 7252 Encore# 42363 Fits models 51, 52, 551, 5421 and 561. - 18 PSI pressure relief; - 3/4-16 thread X 3 OD X 3-1/2 HT, - Mounting seal OD: 2-3/4, 1 Micron EXMARK & FERRIS 12-362 Exmark# 19-3321 Hustler# 768341 / 6976 Encore# HG52114 Fits Transmission model ZT28. Found on Exmark, Hustler, Scag models. - 3/4-16 thread X 2-11/16 OD X 3 HT, - Mounting seal OD: 2-1/2. - Mounting seal OD: 2-13/16 - Anti drain valve, 28 Micron. X 3-13/16 OD X 3-3/4 HT. 12-22 Exmark# 513211 Exmark# 1-513211 Exmark# 63375 Exmark# 1-63375 Exmark# 19-418 Ferris# 2228 (While Quantities Last) Large version of our 12-361. X 3-13/16 OD X 3-7/8 HT; - Anti drain valve, 1 micron 38-3
Small Engine Parts & Accessories GENERAC OIL / TRANSMISSION FILTERS & ACCESS GRAVELY continued 12-634 7185 7185 7185D Found on many Generac models. - 9 to 12 PSI pressure relief, - 3/4-16 thread, 2-11/16 OD X 2-15/16 HT, ; Mounting seal: 2-1/2 OD. NOTE: SAVE SHOP PACK of 12 available - Banta Saw order# 12-92 GRAVELY 12-6 12722 12722-P1 For 7.6 L series tractors. - 3/4-16 thread X 3-3/4 OD X 4-1/4 HT. - Anti drain valve, 2-25 Micron (While Quantities Last) 12-634 43594 / 2777 / 21486 215279 / 215358 Cub Cadet# 49-21-1 For models with Kawasaki engines. - 9 to 12 PSI pressure relief - Mounting seal OD: 2-1/2 - Anti drain valve, 28 Micron. - 3/4-16 thread X 2-11/16 OD X 2-15/16 HT; NOTE: SAVE SHOP PACK of 12 available - Banta Saw order# 12-92 12-345 42366-3/4-16 thread, 3 OD X 3-1/4 HT, - Anti drain valve, 27 Micron. - Mounting seal OD: 2-1/2 12-519 3936 / 3936 For Pro Master 4 series. - Mounting seal OD: 2-13/16 - Anti drain valve, 28 Micron. X 3-13/16 OD X 3-3/4 HT. HONDA 12-36 154-679-23 / 154-679 33 154-POH-35 / 154-PR3-4 1541-MB- / 1541-MJ-4 1541-MJO-3 / 1541-MJO-45 5441-MJO-3 / 5441-MJO-4 5441-MJO-45 Code# 3481355 Code# 538781 Code# 6424329 Code# 81597 Code# 1384445 Code# 1395417 For Honda models: EM5, GX36K1 water cooled engines. - 11 to 14 PSI pressure relief, - M2 X 1.5 thread. 3-1/4 OD X 3-1/8 HT, 12-383 1541-MCJ- 1541-MCJ-3 1541-MFS-D1 NOTE: SAVE SHOP PACK of 12 available - Banta Saw order# 12-93 12-523 213972 For models with Kohler engines. - 3/4-16 thread X 3 OD X 2-3/4 HT NOTE: SAVE SHOP PACK of 12 available - Banta Saw order# 12-94 Fits model GXV53, 16 Hp V-Twin. - M2 X 1.5mm - 2.685 OD X 2.782 HT 12-361 25641-ZE4-3 25641-VE4-3 Code# 435697 Kees# 11164 Yazoo#11164 12-71 89319 9319 94142 Fits Gravely models: PM252H, PM252Z, PM252Z, PM26H, PM26Z, PM272H and PM272Z.. - 1-12 thread X 3-3/4 OD X 5-1/4 HT, - Anti drain valve, 1 micron. Fits models HRC713, HRC718 and HRC72. - 18 PSI pressure relief; X 3 OD X 3-1/2 HT - Mounting seal OD: 2-3/4-1 micron 38-4
Small Engine Parts & Accessories HONDA continued HONDA continued 12-384 154-POH-35 154-PLM-A1PE 154-POH-35 154-ZJ1-4 Code# 7698475 Club Car# 154PH35 Fits Honda 18, 2 and 24 Hp V-Twin engines. Fits Models: GX61, GX62, GX63, GX66, GX67, GX69, GXV34, GXV39, GXV61, GXV62, GXV63, GXV66, GXV67 and GXV69 Engines: HA4118, HA412, HRC713, HRC731K1, HRC718, HRC72, HRC7113 and H6522 Compact Tractors; EB11 and EB12D Generators. - 27 Micron - 2mm X 1.5mm X 2-5/8 OD X 3-3/8 HT, Note: This fi lter replaces old Honda# 154-PLM-A2 12-11 154-PFB-7 / 154-PFB-7 1541-MM5-3 / 1541-MM9-3 1541-MM9-13 / 1541-MM9-35 1541-MM9-45 / 1541-MM9-P 1541-MM9-P1 / 1541-MM9-P3 1541-MT7-3 / 15412-MT7-3 ATV High Flow (HF33) for ATV, Kawasaki 1697-4, 1697-8, 1697-11, 1697-159, 1697-161, 1697-163, 1697-164, 1697-166, 1697-167 and Polaris 38 49 63, Yamaha 3FV-1344-, 3FV-1344-2, 5GH-1344-, 5GH-1344-1, 5GH-1344-3. Size: 2-11/16 OD X 2-7/8 HT. 12-114 1541-KF-1 / 1541-KF-2 1541-KL3-67 / 1541-KYJ-91 15412-KF- / 15412-KF-35 15412-KF-315 - ATV High Flow (HF112) for ATV, Fits Honda ATV models: ATC 25 ES Big Red, ATC 35X, TRX25, TRX25X Four Trax, TRX3 (2WD), TRX3 EX, TRX4 and TRX7. Fits Kawasaki 521-153 and Polaris 38836 and Suzuki K521-153. Kawasaki ATV models: KFX45R, Polaris ATV models: 5 Outlaw and 5 Outlaw Predator. Size: 7/16 ID X 2 OD X 1-3/8 HT. 12-115 154-PFB-14 / 1541-MCJ- 1541-MCJ-3 / 1541-MCJ-55 1541-MFJ-D1 - ATV High Flow (HF24) for ATV, Replaces Arctic Cat# s: 321-44, Kawasaki 1697-2, 1697-3, 1697-7, 1697-168, 1697-17, 1697-172, Yamaha 1WD-E344-, 5GH-1344-2 and 5GH-1344-5. Fits Arctic Cat ATV models: 6 4X4, 65 V-2 4X4, Fits Kawasaki ATV models: KVF36, KVF65, KFX7, KVF7, KVF75. Yamaha ATV models: YFM35 / 4 / 45 / 55 / 66 / 7, Yamaha Side X Side: YXC7, YXE7, YXM7and YXR7. Size: 2-11/16 OD X 2-5/8 HT 125-264 156-ZG4-3 Code# 4497921 Oil Fill Cap Fits models GX11, GX12, GX14, GX16, GX2, GX24, GX27, GX34 and GX39. 125-24 156-ZG4-3 156-ZE1-3 Code# 45146 Oil Dipstick and Gasket Fits models GX11, GX12, GX14, GX16 125-241 1565-ZM-81 Oil Dipstick and Gasket Fits Honda models: GCV135 and GCV16. 125-239 15558-ZJ1-1AH Fits Honda engines. Metric M14 X 1.5 thread. HUSQVARNA (AYP) 12-485 531 3 7-43 / 531 3 73-89 AYP# 795137-7 to 9 PSI pressure relief, - 3/4-16 thread, - 3 OD X 2-5/16 HT, 2-13/16 Seal OD (Vanguard models small version fi lter). NOTE: SAVE SHOP PACK of 12 available - Banta Saw order# 12-91 12-634 531 3 73-88 - 9 to 12 PSI pressure relief - 3/4-16 thread - 2-11/16 OD X 2-15/16 HT - Mounting seal: 2-1/2 OD. NOTE: SAVE SHOP PACK of 12 available - Banta Saw order# 12-92 12-345 531 3 73-92 - 3/4-16 thread - 3 OD X 3-1/4 HT. (Vanguard models large version fi lter). NOTE: SAVE SHOP PACK of 12 available - Banta Saw order# 12-93 38-5
Small Engine Parts & Accessories OIL / TRANSMISSION FILTERS & ACCESS HUSQVARNA (AYP) cont. JOHN DEERE continued 12-523 531 3 73-93 - 3/4-16 thread - 3 OD X 2-3/4 HT. NOTE: SAVE SHOP PACK of 12 available - Banta Saw order# 12-94 12-634 531 3 73-88 Found on many Generac models. - 9 to 12 PSI pressure relief, - 3/4-16 thread, 2-11/16 OD X 2-15/16 HT, ; Mounting seal: 2-1/2 OD. NOTE: SAVE SHOP PACK of 12 available - Banta Saw order# 12-92 12-361 531 3 73-94 539 1 26-6 AYP# 142912 Fits models 51, 52, 551, 5421 and 561. - 18 PSI pressure relief; - 3/4-16 thread X 3 OD X 3-1/2 HT, - Mounting seal OD: 2-3/4, 1 Micron JOHN DEERE 12-638 M86418 Fits John Deere models: 142, 1435, 1445, F735, F912, F915, F925, F935, 425, 445, 455 diesel, 142, 1435, 1565, F735, F912, F915, F925, F932, F935, GX355, X495, X595, X74, X744, X748, X749, HPX Diesel Gator, 25 and 25A Greensmowers. - 11 to 14 PSI pressure relief; - M2 X 1.5 thread X 2-5/8 OD X 2-1/2 HT; - Anti drain valve, 2 Micron 12-345 AM1127 Fits John Deere lawn tractors STX46 (291) with Kohler engines. X 3 OD X 3-1/4 HT.. 12-523 AM125424 GY2577 KH1258 For John Deere lawn tractors SST15, L1 and LX173 with Kohler engines. Fits Kohler engine models: CH18 thru Ch25, CV18 thru CV25 & K582.. X 3 OD X 2-3/4 HT NOTE: SAVE SHOP PACK of 12 available - Banta Saw order# 12-94 12-634 AM1154 AM1127 AM17423 For models with Kawasaki engines. Fits John Deere lawn tractors 112L, LX172 and LX176 with Kawasaki engines; front mount F51. - 9 to 12 PSI pressure relief; - Mounting seal OD: 2-1/2-3/4-16 X 2-11/16 OD X 2-15/16 HT. NOTE: SAVE SHOP PACK of 12 available - Banta Saw order# 12-92 12-626 AM39687 AM3477 For models with Kohler engines. X 3 ODX 5-1/8 HT; - Mounting seal OD: 2-7/8 - Anti drain valve; 28 micron 12-36 M86418 AM11378 Fits models 3, 4, F912, 915, 925, 932 and 935 series. - 11 to 14 PSI pressure relief, -M2 X 1.5 thread 3-1/4 OD X 3-1/8 HT. 12-485 AM119567 LG492932S Fits John Deere models: F62, F68, F687, M653, M655, M665, Z245, Z425, Z51A, Z52A, Z91A and Z92A ZTrak mowers and lawn tractors, 12 Hydro Rake, 8Aercore Aerator. - 7 to 9 PSI pressure relief; - 3/4-16 thread, 3 OD X 2-5/16 HT, - Mounting seal OD: 2-13/16 ; Anti drain valve, 28 micron. (Vanguard models small version fi lter). NOTE: SAVE SHOP PACK of 12 available - Banta Saw order# 12-93 NOTE: SAVE SHOP PACK of 12 available - Banta Saw order# 12-91 38-6
Small Engine Parts & Accessories JOHN DEERE continued JOHN DEERE continued 12-285 AM111 AM15172 AM15555 PMLF3614 PMLF3614J PT18844 TY26278 Fits John Deere models lawn tractors 112L, LX172 and LX176 with Kawasaki engines; front mount F51, Z925A, Z93A, Z95A, Z96A and Z97A Z-Trak mowers; 25 and 25A gas Tri-Plex greenmowers, 25B and 25E hybrid gas riding greenmowers; 2243, 2653 and 2653A gas professional utility mowers; 12 and 12A bunker and fi eld rakes; Gator TX Turf and 18 utility vehicles. - 9 to 12 PSI pressure relief - 3/4-16 thread X 2-11/16 OD X 2-15/16 HT,. Mounting seal: 2-1/2 OD, NOTE: SAVE SHOP PACK of 12 available - Banta Saw order# 12-92 12-71 AT38431 Fits John Deere model 12 hydrorakes and others.. - 1-12 thread X 3-3/4 OD X 5-1/4 HT, - Anti drain valve, 1 micron. 12-512 AM13153 Fits Groundsmaster 3 series; John Deere 647, 657, 667, 717, 727, 777, 797, ProGator 22, 22A, P23 and 23A and new Pro Line Commercial mowers. - 1-12 thread 3-3/4 OD X 3-5/8 HT - Rubber Seal OD: 2-7/8, 1 micron 12-519 AM39653 / AM35176 AM3125 / AM38441 Front mount mowers F911, F912, F915,F925, F932 and F935; Z-trak mowers F62, F68, F687, F737 and F757; Lawn tractors: 14, 23, 3, 312, 314, 316, 317, 318, 322, 33, 332, 4, 42, 43 and 9 series. - Anti drain valve 3/4, 25/3 Micron - 16 thread X 3-13/16 OD X 3-3/4 HT. - Mounting seal OD: 2-13/16, 12-512 AM13153 Fits Groundsmaster 3 series; John Deere 647, 657, 667, 717, 727, 777, 797, ProGator 22, 22A, P23 and 23A and new Pro Line Commercial mowers. - 1-12 thread 3-3/4 OD X 3-5/8 HT - Rubber Seal OD: 2-7/8, 1 micron 12-166 AM13154 Hydraulic Fits John Deere models: 425, 445, 455, X465, X475, X485, X495, X7, X74, X749, 647, 647A, 657, 657A, 667, 667A, 717, 717Z-Trax, 727, 727A, 777, 797 Z-Trak, Z425, Z445, Z465 EZ-Trak and 41 compact diesel. - 1-12 Thread, 3-3/4 OD X 3-5/8 HT, - 2 Micron 125-235 AM115362 Fits John Deere models equipped with Kawasaki engines. Metric M16 X 1.5 thread. KAWASAKI 12-485 4965-72 4965-77 4965-78 Fits KAWASAKI models: FB46V, FC42V, FC54V, FD51D, FD59V, FR651V, FR691V, FR73V, FX481V, FX541V, FX6V, FX651V, FX691V and FX73V. - 7 to 9 PSI pressure relief - 3/4-16 thread, 3 OD X 2-5/16 HT - Mounting seal OD: 2-13/16 Seal OD NOTE: SAVE SHOP PACK of 12 available - Banta Saw order# 12-91 12-634 4965-278 / 4965-274 4965-271 / 4965-27 4965-262 4965-257 Kees# 363312 Fits Kawasaki 14 thru 19 Hp engines. - 2-11/16 OD X 2-15/16 HT; Mounting seal OD: 2-1/2-9 to 12 PSI pressure relief; Anti drain valve, 28 micron. NOTE: SAVE SHOP PACK of 12 available - Banta Saw order# 12-92 12-638 1697-172 Fits John Deere models: 142, 1435, 1445, F735, F912, F915, F925, F935, 425, 445, 455 diesel, 142, 1435, 1565, F735, F912, F915, F925, F932, F935, GX355, X495, X595, X74, X744, X748, X749, HPX Diesel Gator, 25 and 25A Greensmowers. - 11 to 14 PSI pressure relief; - M2 X 1.5 thread X 2-5/8 OD X 2-1/2 HT; - Anti drain valve, 2 Micron 38-7
Small Engine Parts & Accessories OIL / TRANSMISSION FILTERS & ACCESS KAWASAKI continued KOHLER 12-11 1697-4 / 16978 1697-11 / 1697-159 1697-161 / 1697-163 1697-164 / 1697-166 1697-167 ATV High Flow (HF33) for ATV, Fits Polaris 38 49 63. Fits Yamaha 3FV-1344-, 3FV-1344-2, 5GH-1344-, 5GH-1344-1, 5GH-1344-3. Size: 2-11/16 OD X 2-7/8 HT. 12-111 521-S5 High Flow (HF138) for ATV, Replaces Arctic Cat# s: 436-1, 436-146, 812-5 and 812-29 (1996 thru 24), 375, 4 and 454 models; Fits Kymco 1541A-PWB1-9, Fits Artic Cat ATV models: 4, 454 and 5. Size: 2-3/4 OD X 2-11/16 HT. (Replaces our old# 12-1128). 12-114 521-153 12-485 28 5 1 / S Fits models: CH18-CH25 & CV18-CV25; for 18 thru 25 HP engines. - 7 to 9 PSI pressure relief, 3/4-16 thread, - 3 OD X 2-5/16 HT, 2-13/16 Seal OD, (Vanguard models small version fi lter). NOTE: SAVE SHOP PACK of 12 available - Banta Saw order# 12-91 12-345 25 5 33-S 25 5 34-S 52 5 2 / S Fits Kohler engine models: CH11 thru CH25, CV11 thru CV22, M18 thru M2, MV16 thru MV2, K582, CV64, SV73, SV81, SV82, SV83 and SV84. - 3/4-16 thread, 3 OD X 3-1/4 HT. (Vanguard models large version fi lter). - ATV High Flow (HF112) for ATV, Replaces Polaris 38836 and Suzuki K521-153. Fits Kawasaki ATV models: KFX45R, Polaris ATV models: 5 Outlaw and 5 Outlaw Predator. Size: 7/16 ID X 2 OD X 1-3/8 HT. 12-115 1697-2 / 1697-3 1697-7 / 1697-168 1697-17 / 1697-172 - ATV High Flow (HF24) for ATV, Fits Kawasaki ATV models: KVF36, KVF65, KFX7, KVF7, KVF75. Replaces Arctic Cat# s: 321-44, Yamaha 1WD-E344-, 5GH-1344-2 and 5GH-1344-5. Fits Arctic Cat ATV models: 6 4X4, 65 V-2 4X4. Size: 2-11/16 OD X 2-5/8 HT. 12-116 1699-4 ATV High Flow (HF123) for ATV, Fits Kawasaki ATV models: KLT2, KLT22, KLT25, KSF25, KEF3 and KLF3. Size: 2-3/16 (56mm) OD X 2-1/8 (54mm) HT. 125-235 99969-1395 Fits Kawasaki engines. Metric M16 X 1.5 thread. NOTE: SAVE SHOP PACK of 12 available - Banta Saw order# 12-93 12-523 12 5 1 / S 12 5 8 Woods# 782 Fits models CH18 thru 25, CV18 thru 25 and K582. X 3 OD X 2-3/4 HT - Mounting seal OD: 2-13/16. NOTE: SAVE SHOP PACK of 12 available - Banta Saw order# 12-94 12-626 277233 / 277233-S Fits models K482, K532 & K582. -3/4-16 thread 3 OD X 5-1/8 HT - Mounting seal OD: 2-7/8 125-237 25 462 8 25 755 14 / S Tecumseh# 37651 Adapts to most 8 Hp and larger engines. Permanent mount on engines. - 1/2 drain hode connection, - 3/8-18 NPTF thread 125-294 X-35-4 X-35-4-S Magnetic Oil Plug Size: 3/8-18 pipe thread. (Sold in Multiples of 5) 38-8
Small KOHLER continued MTD Engine Parts & Accessories 125-32 X-75-1 / S 25 139 57-S Magnetic Oil Plug Size: 1/4-18 pipe thread. KUBOTA 12-638 15853-9917 HH15-3243 Fits Kubota 316, 463, B73, B74, B741, BX15, BX18, BX183, BX185, BX186, BX223, BX235, BX236, BX24, BX25, G18, G19, G2, G216, G32, GF18, GF18E, KX41-3, PC9, RTV5, RTV9, T16, TG186, TX525, U17, ZD18, ZD21, ZD321, ZD323, ZG222 and ZG227. - 11 to 14 PSI pressure relief; - M2 X 1.5 thread X 2-5/8 OD X 2-1/2 HT; - Anti drain valve, 2 Micron 12-359 15241-329 Grasshopper# 18 Fits many B, BX, G, F, U and ZD series Kubota s. Fits diesel engines. 2mm X 1.5mm X 3.243 OD X 2.944 HT. 12-36 7-15241 7-7434 341-3758 Troy Bilt# 1874139 Fits models T16H, D6, D65, D75, D85 and D95. - 11 to 14 PSI pressure relief - M2 X 1.5 thread X 3-1/4 OD X 3-1/8 HT - Rubber seal OD: 2-1/2, anti drain valve, 27 micron 12-383 15853-3243 15853-99179 Toro# 93-4295 Smaller version of our 12-36. - M2 X 1.5 thread X 2-5/8 OD X 2-3/4 HT, - Rubber seal OD: 2-1/2, anti drain valve. 12-597 6621-366 HH66-366 HHK71-148 Perkins# 145161-9 Toro# 85-493 Fits all B series Kubota as well as Perkins and Toro. (Replaces Perkins# 145161-9) - 3/4-16 Thread, 3 OD X 4-1/16 HT; - Mounting seal OD: 2-3/4 ; 25 Micron (Sold in Multiples of 5) 12-53 751-1151 751-1269 951-1269 Fits MTD 4P9HU, 4P9JHA, 4P9JU, 4P9JUA, 4P9JUB, 4P9MU, 4P9MUA, 4P9MUB engines on riding mowers. Size: 3/4-16 thread, 2-1/8 HT X 2-5/8 OD. 12-519 727-162 Fits hydro units. 3-13/16 OD X 3-3/4 HT. - Mounting seal OD: 2-13/16. 12-71 723-45 - 1-12 thread X 3-3/4 OD X 5-1/4 HT, - Anti drain valve, 1 micron. ONAN 12-634 122-737 122-737-3 Fits model E125V with Kawasaki engine. - 9 to 12 PSI pressure relief, - 3/4-16 thread, 2-11/16 OD X 2-15/16 HT, ; - Mounting seal: 2-1/2 OD. NOTE: SAVE SHOP PACK of 12 available - Banta Saw order# 12-92 12-345 122-645 Fits models P216, 218, 22, BFA, BGA, BGAL, BGD, BGDL, BGE, BGEL, BGM, B43G & B48GM. X 3 OD X 3-1/4 HT. ; NOTE: SAVE SHOP PACK of 12 available - Banta Saw order# 12-93 12-517 122-8 122-323 122-445 Fits 16 and 2 Hp twin cylinder models from 1989 thru 1994. - 3/4-16 X 3 OD X 4-5/8 HT; - Anti drain valve, 25-3 micron 38-9
Small Engine Parts & Accessories OIL / TRANSMISSION FILTERS & ACCESS ONAN continued SCAG continued 12-626 122-469 12-71 48758 Fits models NA, NHB, NHC, NHP, N52M, P224 & T26. - 3/4-16 thread X 3 OD X 5-1/8 HT; - Anti drain valve, Mounting seal OD: 2-7/8, 28 micron. 12-519 122-185 Fits models JA, JB, JC and JF. - 3/4-16 thread X - 3-13/16 OD X 3-23/32 HT; - Mounting seal OD: 2-13/16 ; - Anti drain valve, 25/3 Micron. POLARIS 12-11 38 49 63 ATV High Flow (HF33) for ATV, Size: 2-11/16 OD X 2-7/8 HT. 12-114 38 8 36 - ATV High Flow (HF112) for ATV, Fits Polaris ATV models: 5 Outlaw and 5 Outlaw Predator. Size: 7/16 ID X 2 OD X 1-3/8 HT. SCAG 12-362 HG52114 Replaces Scag Hydro Gear HG52114. Fits (Transmission Model Zt28). Replaces Scag HG52114, fi ts Freedom Z. Also found on Exmark, Hustler and Scag models. Size: 2-11/16 OD X 3 HT, Mounting seal OD: 2-1/2 12-512 48462 48462-1 Fits Scag Hydro units; SMTC, SMWC, SMZ, SMZC, SSZ, STC, STHM and STR-2CH. - 1-12 thread - 3-3/4 OD X 3-5/8 HT - Rubber Seal OD: 2-7/8, 1 micron Fits Scag models: STHM, MAGIII, SCR, SM, SMST, SMT, SMTC and STT; Wildcat, Tiger Cub and Tiger Cat - 1-12 thread X 3-3/4 OD X 5-1/4 HT, - Anti drain valve, 1 micron. 12-361 48277 BE1-18 Fits model Tiger Cub STC52V-24HN. - 18 PSI pressure relief; - 3/4-16 thread X 3 OD X 3-1/2 HT, - Mounting seal OD: 2-3/4, 1 Micron 125-235 482351 Fits many Scag models equipped with Kawasaki engines. Metric M16 X 1.5 thread. 125-238 482352 Fits Scag and also some Kawasaki 19 thru 25 Hp vertical engines. 3/8-18 NPTF threads 125-236 482349 Fits Scag and also some Kawasaki 19 thru 25 Hp vertical engines. Metric M2 X 2.5mm threads SIMPLICITY 12-361 1719168 1719168YP Fits model Tiger Cub STC52V-24HN. - 18 PSI pressure relief; - 3/4-16 thread X 3 OD X 3-1/2 HT, - Mounting seal OD: 2-3/4, 1 Micron 12-519 171439 / SM 165954 / SM Fits Sunstrand hydro models. - 3-13/16 OD X 3-3/4 HT - Mounting seal OD: 2-13/16. - Anti drain valve, 28 Micron 38-1
Small SNAPPER TECUMSEH Engine Parts & Accessories 12-634 7-7355 7-7288 777288 777288YP For Snapper models equipped with Kawasaki engines. - 9 to 12 PSI pressure relief 2-3/4 OD X 2-15/16 HT - Mounting seal OD: 2-11/16. NOTE: SAVE SHOP PACK of 12 available - Banta Saw order# 12-92 12-512 2-7164 727164 727164YP Fits Hydro units. - 1-12 thread - 3-3/4 OD X 3-5/8 HT - Rubber Seal OD: 2-7/8, 1 micron SUZUKI 12-111 1651-3G 1651-3GX7 1651-6B 1651-6B1 1651-7J 1651-34E 1651-44D1 Artic Cat# 4361 Artic Cat# 436146 Artic Cat# 8125 Artic Cat# 81229 High Flow (HF138) for ATV, Motorcycle and Marine applications. Kymco 1541A-PWB1-9, Fits Artic Cat ATV models: 4, 454 and 5. Fits Suzuki ATV models: KLT-A4, KLT-F4, LT-A4, LTF4, LTF-F4, LT-F4 and LT-A4. Replaces our old# 12-1128. 12-114 K521-153 12-485 36563 36961 Fits models OHV13, OHV135, OHV15, OHV155, OHV165, OHV175, OHV18, TVT691, OV and VTX. X 3 OD X 2-5/16 HT, Rubber seal - OD: 2-13/16, 7 to 9 PSI pressure relief,. NOTE: SAVE SHOP PACK of 12 available - Banta Saw order# 12-91 12-634 36262 For models OHV15 specs 243, 245, 241, 2413 and OHV16 specs 2425A. - 9 to 12 PSI pressure relief, - 2-11/16 OD X 2-15/16 HT, - Mounting seal OD: 2-1/2. Anti drain valve, 28 micron. NOTE: SAVE SHOP PACK of 12 available - Banta Saw order# 12-92 TORO / WHEEL HORSE 12-485 177817 For 5 Hp Briggs and Stratton Vanguard engines. Fits models: 147, 2617, 297, 2947, 337 and 357. - 7 to 9 PSI pressure relief, - 3/4-16 thread, 3 OD X 2-5/16 HT, 2-13/16 Seal OD (Vanguard models small version fi lter). NOTE: SAVE SHOP PACK of 12 available - Banta Saw order# 12-91 12-634 18-3842 / NN1684 KW1586 / KW1761 Woods# 72859 - ATV High Flow (HF112) for ATV, Fits Toro models with Kawasaki engines. - 9 to 12 PSI pressure relief; - 2-11/16 OD X 2-15/16 HT, - Mounting seal OD: 2-1/2, Anti drain valve, 28 micron NOTE: SAVE SHOP PACK of 12 available - Banta Saw order# 12-92 38-11
Small Engine Parts & Accessories OIL / TRANSMISSION FILTERS & ACCESS TORO / WHEEL HORSE TORO / WHEEL HORSE 12-523 982 For models with Kohler engines. ;, 3 OD X 2-3/4 HT - Mounting seal OD: 2-13/16. Anti drain valve, 27 micron NOTE: SAVE SHOP PACK of 12 available - Banta Saw order# 12-94 12-345 NN1147 Woods# 7939 Fits models with Kohler engines. - 3 OD X 3-1/4 HT - Mounting seal OD: 2-13/16. Anti drain valve, 27 micron NOTE: SAVE SHOP PACK of 12 available - Banta Saw order# 12-93 12-517 NN1143 Fits 16 and 2 Hp twin cylinder models from 1989 thru 1994. - 3 OD X 4-5/8 HT - Anti drain valve, 25-3 micron 12-71 28-137 54-11 Fits Toro / Wheel Horse Groundsmaster 117 and 118 models, Greenmaster 3, Turfpro and SandPro models. - Thread Size: 1-12, - 3-3/4 OD X 5-1/4 HT, 1 Micron, Anti-Drain. 12-519 18335 16-583 79-527 For hydrostatic transmissions. Fits TORO hydro models 3, 4 and 5 series.. 3-13/16 OD X 3-3/4 HT - Mounting seal OD: 2-13/16. Anti drain valve, 28 micron 12-22 23-23 / 23-974 14-5169 115-8527 98-7931 Large version of our 12-361. Will fi t both applications listed - see actual size below. Fits Toro Groundsmaster models 217, 22, 322 and 327 series. 3-13/16 OD X 3-7/8 HT; - Mounting seal OD: 2-13/16. Anti drain valve, 1 micron 12-361 23-974 63-375 E63375 E633752 1-63375 Fits Toro models: Z1, Z2, Z4, Z5, Midsize ProLine and commercial walk behinds Small version of our 12-22. For hydrostatic transmissions. 3 OD X 3-1/2 HT; - Mounting seal OD: 2-13/16. Anti drain valve, 1 micron 12-512 67-811 Fits Groundsmaster 3 series. For new Pro Line commercial mowers. 1-12 thread 3-3/4 OD X 3-5/8 HT Mounting seal OD: 2-7/8, 1 micron 12-464 63-3752 E63-3752 Dixie Chopper# 6814 Exmark# 523541 For hydrostatic transmissions. - 3 OD X 3-7/8 HT - 4 micron 38-12
Small TROY BILT YANMAR Engine Parts & Accessories 12-519 1719859 172645 Fits models 1455, 1476, 1477,166, 166, 1666, 1886, 194, 197, 198, 286, 287, QT-16, 136,1362, 1374 & 1376 hydro garden tractors and 1311 GTX hydro garden tractors. X 3-13/16 OD X 3-3/4 HT. - Anti drain valve Mounting seal OD: 2-13/16, 28 micron 12-36 1874139 Fits model 174 with 17 Hp Diesel engine. - 11 to 14 PSI pressure relief, - M2 X 1.5 thread - 3-1/4 OD X 3-1/8 HT - Mounting seal: 2-1/2 OD, Anti drain valve, 27 micron 12-36 Yanmar# 12915-3515 Fits model 174 with 17 Hp Diesel engine. - 11 to 14 PSI pressure relief, - M2 X 1.5 thread - 3-1/4 OD X 3-1/8 HT - Mounting seal: 2-1/2 OD, Anti drain valve, 27 micron NOTES: 12-22 1719859 172645 Large version of our 12-361. Will fi t both applications listed - see actual size below. Fits Troy Bilt models 1455, 1476, 1477, 166, 166, 1666, 1886, 194, 197, 198, 286, 287, QT-16; 136, 136, 1362, 1374 and 1376 hydro garden tractors; 1311 GTX hydro garden tractors. - 3-3/16 OD X 3-23/32 HT Anti drain valve, 1 micron YAMAHA & YANMAR 12-11 Yamaha# 3FV-1344 3FV-13442 5GH-1344 5GH-13441 5GH-13443 ATV High Flow (HF33) for ATV, Size: 2-11/16 OD X 2-7/8 HT. 12-115 Yamaha# 1WD-E344 5GH-13442 5GH-13445 - ATV High Flow (HF24) for ATV, Fits Yamaha ATV models: YFM35 / 4 / 45 / 55 / 66 / 7, Yamaha Side X Side: YXC7, YXE7, YXM7and YXR7. Size: 2-11/16 OD X 2-5/8 HT. 38-13