Facts and figures ALLROUNDER 52 A Distance between tie bars: 2.47 x 2.47 (52 x 52 mm) Clamping force: 165 tons Injection unit: 6.1 oz, 8.2 oz, 15.3 oz www.arburg.com
52 A Machine dimensions 78.8 53.7 33.44 15.75 54.13 max. 15.35 4.72 24.61 184.96 1)2) 12.99 2.69 3) 78.74 19.96 31.5 1.4 17.24 85.47 1) 86.2 2) 86.22 3) 189.92 1) 198.9 2) 215.71 3) Electrical connection 63.54 32.8 Cooling water connection 1) Injection unit 6.1 oz 2) Injection unit 8.2 oz 3) Injection unit 15.3 oz 2
Technical data 52 A Clamping unit with clamping force max. tons 52 A 165 Opening force stroke max. tons inch.. --- 17.72.. Mold height, fixed variable min.-max. inch.. --- 9.84-21.65.. Platen daylight fixed variable max. inch.. --- 27.56-39.37.. Distance between tie bars (w x h) inch.. 2.47 x 2.47.. Mold mounting platens (w x h) max. inch.. 27.36 x 27.36.. Weight of movable mold half max. lbs 22 Ejector force stroke max. tons inch.. 4.4 6.89.. Dry cycle time EUROMAP ² Version L1 min. s - inch... 1.5-14.33.. Version L2 min. s - inch.. 1. - 14.33.. Injection unit with screw diameter mm 3 6.1 oz 35 4 35 8.2 oz 4 45 45 15.3 oz 5 55 Effective screw length L/D 23.3 2 17.5 23 2 18 22 2 18 Screw stroke max. inch. 5.91.. 6.3.. 7.87. Calculated stroke volume max. cu. inch 6.5 8.8 11.5 9.4 12.3 15.5 19.4 23.9 28.9 Shot weight max. oz / PS 3.4 4.7 6.1 5. 6.5 8.2 1.3 12.7 15.3 Material throughput max. lbs/h PS 37.4 45.1 53.9 55. 63.8 77. 11.2 116.6 129.8 max. lbs/h PA6.6 18.7 23.1 27.5 27.5 33. 38.5 5.6 59.4 66. Injection pressure max. psi 3625 29 22185 3625 29 2291 35815 29 23925 Holding pressure max. psi 3161 232 1769 335 232 1827 2871 232 1914 Injection flow ² Version L1 max. cu. inch/s 6. 8.2 1.7 7.6 1. 12.6 1.7 13.2 15.9 Version L2 max. cu. inch/s 12.9 17.6 22.9 15. 19.5 24.8 19.4 24. 29. Screw circumferential speed ² max. ft./min 167 197 226 174 197 223 177 197 217 Screw torque max. ft./lbs 236 281 317 354 46 45 664 738 812 Nozzle contact force retraction stroke max. tons inch 5.5 11.81 6.6 11.81 7.7 15.75 Heating capacity zones kw 6.4 5 9.4 5 19.9 8 Feed hopper lbs 8 8 8 Drive and connection with injection unit 6.1 oz Version L1 8.2 oz 15.3 oz 6.1 oz Version L2 8.2 oz 15.3 oz Net weight of machine lbs 15356 1562 1738 15356 1562 1738 Sound press. level Ref. only ⁴ db(a) 66 3 66 3 Electrical connection ³ kw 23 29 46 27 33 51 Total A --- --- Machine A --- 4 --- 4 --- 5 --- 7 --- 7 --- 8 Heat A 2 --- 3 --- 6 --- 2 --- 3 --- 6 --- Cooling water connection max. F 86 86 min. Δp psi 22 1" 22 1". Machine type with EUROMAP size designation ¹ Drive 52 A 165 tons 6.1 oz 8.2 oz 15.3 oz L1 L2 Upon request: other machine types and mold installation heights, screws, drive powers etc. All specifications relate to the basic machine version. Deviations are possible depending on variants, process settings and material type. Depending on the drive, certain combinations, e.g. max. injection pressure and max. injection flow may be mutually exclusive. 1) Clamping force (tons) - Large injection unit = max. stroke volume (cu. inch) x max. injection pressure (psi) 2) Specifications depend on drive version / drive design. 3) Specifications relate to 23V/6 cycles 46V/6 cycles. 4) Emission sound pressure level at the workplace. Detailed information in the operating instructions. [ ] Specifications apply to alternative equipment. 3
52 A Mold installation dimensions L1 / L2 Stroke max. 6.89 11.256-.394 1.787-.394 3) C X Y 14.96 15.35 Reducing ring to 4. inch Ø5.118 +.2.39 deep Ø4.921 +.2 D B A max. 27.56-39.37 Stroke max. 17.72 a a max. Standard Thermoset Injection unit 6.1 oz 8.2 /15.3 oz 1.57 1.97.79 1.97 Center ejector X Bore in mold (if required) Y Ø1.26-.4 Ø.94.12.47-.4.75 1.97 3 Ø1.26 Ø3.54 Ø2.36 reducing ring Ø4 Ø3.23 Ø2.52 Ø1.69 mold.79 fixed mold.39.79 mounting platen Injection unit 6.1 oz Injection unit 8.2 oz / 15.3 oz Injection unit 8.2 oz 1) / 15.3 oz 2) Thermoset version 4 Ø4.33 1) Ø4.92 2) Ø2.56 1) Ø2.76 2) Closing force for spring molds / during injection compression molding* Ejector plate D Robotic system mounting E Closing force [tons] 176 154 132 11 88 66 44 22 7 3) 5/8-11 UNC 7 3) 22.5 13.78 1.28 3.84 3.94 threads 5/16-18 UNC.63 deep 1 2 3 4 5 6 Mold stroke [inch ] * automatic locking force adjustment up to 3.3 tons 1.38 4.13 threads 5/8-11 UNC 1.22 deep 4
Mold installation dimensions L1 / L2 52 A Fixed mold mounting platen A reducing ring to 4. inch Ø5.118 +.2.39 deep Ø4.921 +.2 1) 17.91 21.85 Ø.87 Ø2.95 14.68 1) 23.43 2.47 28.54 21.83 1) 23.48 17.72 2 14 1 6 33.7 threads 5/8-11 UNC 1.22 deep 6 1 14 2 31.5 Moving mold mounting platen B 2.47 23.43 28.54 22.36 1) 26.3 1) 24.2 27.95 1) Dimensions apply to a platen daylight of 37.8 or larger. 5
52 A Shot weights Theoretical shot weights for the most important materials Injection units 6.1 oz 8.2 oz 15.3 oz Screw diameter Polystyrene Styrene heteropolymerizates inch mm max. oz PS max. oz SB max. oz SAN, ABS 1) 1.18 1.38 1.57 3 35 4 3.4 4.6 6.1 3.3 4.6 5.9 3.2 4.4 5.8 1.38 1.57 1.77 35 4 45 5. 6.5 8.2 4.8 6.3 8. 4.8 6.2 7.9 1.77 1.97 2.17 45 5 55 1.3 12.7 15.3 1. 12.3 15. 9.8 12.1 14.7 Cellulose acetate max. oz CA 1) 3.8 5.2 6.8 5.6 7.3 9.2 11.5 14.3 17.2 Celluloseacetobutyrate max. oz CAB 1) 3.6 4.9 6.4 5.2 6.8 8.6 1.7 13.2 16. Polymethyl methacrylate max. oz PMMA Polyphenylene oxide, mod. max. oz PPO Polycarbonate max. oz PC Polysulphone max. oz PSU Polyamides max. oz PA 6.6 PA 6 1) max. oz PA 6.1 PA 11 1) Polyoximethylene (Polyacetal) max. oz POM Polyethylene terephthalate max. oz PET Polyethylene max. oz PE-LD max. oz PE-HD Polypropylene max. oz PP Fluorpolymerides max. oz FEP, PFA, PCTFE 1) max. oz ETFE Polyvinyl chloride max. oz PVC-U max. oz PVC-P 1) 3.5 4.8 6.3 3.2 4.3 5.6 3.6 4.9 6.4 3.7 5. 6.6 3.4 4.6 6. 3.2 4.3 5.6 4.2 5.8 7.5 4.1 5.5 7.2 2.6 3.5 4.6 2.7 3.6 4.7 2.7 3.7 4.8 5.5 7.4 9.7 4.8 6.5 8.5 4.1 5.6 7.3 3.8 5.2 6.8 5.1 6.7 8.5 4.6 6. 7.6 5.2 6.8 8.6 5.4 7. 8.9 4.9 6.5 8.2 4.6 6. 7.6 6.1 8. 1.1 5.9 7.7 9.8 3.7 4.9 6.2 3.9 5. 6.4 4. 5.2 6.5 7.9 1.4 13.1 6.9 9. 11.4 6. 7.8 9.9 5.5 7.2 9.2 1.6 13.1 15.8 9.5 11.7 14.2 1.8 13.3 16.1 11.1 13.8 16.6 1.2 12.6 15.2 9.5 11.7 14.2 12.7 15.6 18.9 12.2 15.1 18.2 7.7 9.6 11.6 8. 9.9 12. 8.2 1.1 12.2 16.4 2.2 24.5 14.3 17.7 21.4 12.4 15.3 18.5 11.4 14.1 17.1 1) average value ARBURG GmbH + Co KG Arthur-Hehl-Strasse 7229 Lossburg Tel.: +49 7446 33- www.arburg.com contact@arburg.com With locations in Europe: Germany, Belgium, Denmark, France, United Kingdom, Italy, Netherlands, Austria, Poland, Switzerland, Slovakia, Spain, Czech Republic, Turkey, Hungary Asia: People s Republic of China, Indonesia, Malaysia, Singapore, Taiwan, Thailand, United Arab Emirates America: Brazil, Mexico, USA For more information, please go to www.arburg.com. 218 ARBURG GmbH + Co KG The brochure is protected by copyright. Any utilization, which is not expressly permitted under copyright legislation, requires the previous approval of ARBURG. All data and technical information have been compiled with great care. However we accept no responsibility for correctness. Individual illustrations and information may deviate from the actual delivery condition of the machine. The relevant valid operating instructions are applicable for the installation and operation of the machine. ARBURG GmbH + Co KG DIN EN ISO 91 + 141 + 51 certified 6889_EN_US_4218 Subject to alterations