AXLE LED PENDANT ASYMMETRIC W W W. L U M E N W E R X. C O M PROJECT: TYPE: NOTES: DESCRIPTION Axle is an elegant and compact LED linear accent luminaire providing efficient asymmetric light distribution. Softly curved, Axle measures just 2 11/16" by 3 11/16". With adjustable optics, light output from 350 to 1200 lumens per foot (nominal), and efficacy up to 126, Axle delivers very effective illumination to graphics and artwork, as well as ceilings and walls. Highly flexible, Axle can be installed as individual luminaires (up to 8') or in continuous runs, with a choice of arm or cable suspension. LED boards and on-board driver are accessible without removing the luminaire. ORDER GUIDE AXLPAD APO LED up to 126 lm/w performance LUMINAIRE ID OPTICS LIGHT SOURCE CRI LUMEN PACKAGES COLOR TEMP. AXLPAD - Axle pendant APO - Ajustable Asymmetric LED - high performance LED 80-80CRI 350 - eco low output 350lm/ft 30-3000k asymmetric direct Projecting Optic 90-90CRI 550 - low output 550lm/ft 35-3500k BAF - white baffles overlay 750 - med output 750lm/ft 40-4000k 950 - high output 950lm/ft 1200 - ultra high output 1200lm/ft LUMINAIRE LENGTH VOLTAGE DRIVER ELECTRICAL Standard sections - 2', 3', 4', 5' & 8' 120-120V D - dimming 0-10V 1-1 circuit For all other specify length 277-277V DA - Dali +#EB - emergency battery pack (for min 4' fixture) #FT - nominal length in feet UNV - 120V-277V LA2- Lutron Hi-Lume A - 2 wires 120V +#EM - emergency light circuit #IN - length in inches 347-347V LA3 - Lutron Hi-Lume A - 3 wires /EcoS +#NL - night light circuit LEH - Lutron EcoSystem H LE5 - Lutron EcoSystem 5 OTH - other (consult factory) MOUNTING MOUNTING PLATE FINISH OPTIONS AC36 - air craft cable 36" 44W - 4" by 4" white plate (arm) W - matte white CU - custom AC# - cable custom length (max 36") 44AL - 4"by 4" aluminum plate (arm) AL - aluminum ARM6 - cantilever arm 6" 5CW - 5" white round canopy (cable) CF# - custom finish specify RAL# ARM12 - cantilever arm 12" 5CAL - 5" aluminum round canopy (cable) ARM18 - cantilever arm 18" 4RW - 4" white round plate (arm) ARM# - cantilever arm custom length (max 24") 4AL - 4" aluminum round plate (arm) See page 2 for ordering code detailed information CROSS SECTION CROSS SECTION OPTICS LIGHT DISTRIBUTION 3ft 2 11/16" 3 11/16" 2 11/16" 3 11/16" AXL - axle pendant air craft cable AXL - axle pendant cantilever APO - Asymmetric Projecting Optics At 3ft from wall File Name: AXLE-PENDANT-ASYM-SPEC Page: 1 / 5
AXLE LED PENDANT ASYMMETRIC W W W. L U M E N W E R X. C O M OPTICS ASYMMETRIC PROJECTING OPTIC (APO) - Cartridge-mounted, linear LED arrays are paired with precisely semi-specular reflector for smooth light distribution and a 95 0 beam spread. The LED array is protected by a clear acrylic cover. Peak intensity occurs at 30º below nadir with a peak-tozenith intensity ratio of 5.2:1. OPTIONAL BAFFLES (BAF) - Optional die-formed sheet metal white baffle with blades spaced 0.5" provides lateral shielding and can be field installed. The baffles are in sheet metal. LIGHT SOURCE - LED Custom linear array of mid-flux LED's are cartridge-mounted to facilitate service and thermal management. Available in 3000K, 3500K, and 4000K with a minimum 80 CRI and an option for 90 CRI with elevated R9 value. consistency are maintained to within 3 SDCM. LEDs operate at reduced drive current to optimize efficacy and lumen maintenance. All LEDs have been tested in accordance with IESNA LM-80-08 and the results have shown L80 lumen maintenance greater than 60,000 hours. Absolute product photometry is measured and presented in accordance with IESNA LM-79, unless otherwise indicated. AT 4000K - APO eco low output 4000K 11 1400 125 low output 4000K 17.5 2200 126 medium output 4000K 24.5 3000 123 high output 4000K 31.5 3800 121 ultra high output 4000K 40.5 4800 119 LIGHT DISTRIBUTION Field Adjustable Aiming (15 options) 0º 300º 3ft AXLPAD-APO-LED-80-350-40-20FT Luminaire = 58W (for 20ft) Ceiling Height = 10ft Length of Wall = 20ft Suspension Drop = 2ft 60º 0º Stem mouning Cable mounting The Axle housing can be field rotated to provide either indirect (ceiling) or direct illumination. Detents in 15º increments permit precise aiming. Foot Candles on 20' length wall 11.5 13.2 13.7 14.0 14.2 14.2 14.0 13.8 13.4 11.7 33.0 39.4 41.7 42.2 42.4 42.4 42.3 41.8 39.6 33.0 32.7 39.6 42.6 43.7 44.0 44.0 43.7 42.7 39.7 32.2 21.9 26.0 28.3 29.5 30.0 30.0 29.5 28.4 26.1 22.0 12.3 13.9 15.1 16.0 16.5 16.5 16.0 15.1 13.9 12.2 LUMINAIRE LENGTH 95º 120º Peak Angle Axle is available in individual lengths up to 8'. The mounting hub provides connection for installation in continuous rows, allowing each luminaire to be aimed independently. File Name: AXLE-PENDANT-ASYM-SPEC Page: 2 / 5
AXLE LED PENDANT ASYMMETRIC W W W. L U M E N W E R X. C O M ELECTRICAL Factory-set adjustable output current electronic driver with 120-277V AC line input. Dimmable from at least 100%-5% with 0-10V control. Rated life (90% survivorship) of 50,000 hours at 50ºC max. ambient (and 70ºC max. case) temperature. Terminal block connections for easy service. At maximum driver load: Efficiency>84%, PF>0.9, THD<20%. Other specifiable options include Lutron Hi-Lume A (specify 2, 3 or 4 wires), EcoSystem H (100%-1%, fade-to-black) and EcoSystem 5 (100%-5%) dimmable drivers and DALI protocol drivers. MOUNTING Axle is ceiling mounted using a choice of a fixed arm with concealed wiring, 6", 12" or 18" long with a 4"x4" plates. A standard 36" aircraft cable with a white power cord using 4" round canopies is also available. 6 MOUNTING PLATES 4" x 4" 4" FINISH Interior - Natural aluminium Inner extrusion and 95%, reflective white brackets Exterior - White or aluminum powder coating. EMERGENCY Factory installed long life high temperature recyclable Ni-Cad battery pack with test switch and charge indicator, minimum of 90 minutes operation, up to 1000 lumens per 4ft (25ºC) emergency lighting output. Recharge time of 24 hours. CONSTRUCTION Housing - extruded aluminum 0.090" nominal thickness Reflector - Reflector: semi-specular anodised aluminum sheet 0.020" Lens - Extruded Clear Acrylic 0.050" nominal thickness Interior Brackets - 22 GA CRS / Painted White Reflector bracket - extruded aluminum 0.090" nominal thickness / Natural finish) End-caps - die-cast aluminum Joiner - die-cast aluminum Cantilever - rectangular cold rolled steel tube with welded mounting plate Air craft cable suspension - 7x7 braids Aluminum air craft cable 0.046" diam thick Baffles - white sheet metal 12 MAINTENANCE LED boards are removable from the cartridge for easy replacement. Both cartridge and driver are accessible without removing the luminaire. 18 WEIGHT AXLE 4ft - 3.2Kg - 7lb AXLE 8ft - 6.3Kg - 14lb CERTIFICATIONS ETL - Rated for Dry/Damp locations. Conforms to UL Standard 1598 and certified to CAN/CSA Standard C22.2 No. 250.0. 36 WARRANTY LumenWerx provides a five-year limited warranty of electrical and mechanical performance of the luminaires, including the LED boards, drivers, and auxiliary electronics. LumenWerx will repair or replace defective luminaires or components at our discretion, provided they have been installed and operated in accordance with our specifications. Other limitations apply, please refer to the full warranty on our website. File Name: AXLE-PENDANT-ASYM-SPEC Page: 3 / 5
AXLE LED PENDANT ASYMMETRIC W W W. L U M E N W E R X. C O M 350 LUMEN AT 80CRI - ECO LOW OUTPUT eco low output 3000K 12 1400 117 240 eco low output 3500K 11.5 1400 121 eco low output 4000K 11 1400 125 480 719 959 550 LUMEN AT 80CRI - LOW OUTPUT low output 3000K 18.5 2200 118 377 low output 3500K 18 2200 122 low output 4000K 17.5 2200 126 754 1131 1507 750 LUMEN AT 80CRI - MEDIUM OUTPUT medium output 3000K 26 3000 115 514 medium output 3500K 25 3000 119 medium output 4000K 24.5 3000 123 1028 1542 2056 File Name: AXLE-PENDANT-ASYM-SPEC Page: 4 / 5
AXLE LED PENDANT ASYMMETRIC W W W. L U M E N W E R X. C O M 950 LUMEN AT 80CRI - HIGH OUTPUT high output 3000K 33.5 3800 113 651 high output 3500K 32.5 3800 117 high output 4000K 31.5 3800 121 1302 1953 2604 1200 LUMEN AT 80CRI - ULTRA HIGH OUTPUT ultra high output 3000K 43 4800 111 822 ultra high output 3500K 41.5 4800 115 ultra high output 4000K 40.5 4800 119 1644 2467 3289 File Name: AXLE-PENDANT-ASYM-SPEC Page: 5 / 5
AXLE LED WALL ASYMMETRIC INDIRECT W W W. L U M E N W E R X. C O M DESCRIPTION PROJECT: Axle is an elegant and compact LED linear accent luminaire TYPE: providing efficient asymmetric light NOTES: distribution. Softly curved, Axle measures just 2 11/16" by 3 11/16". With adjustable optics, light output from 350 to 1200 lumens per foot (nominal), and efficacy up to 126, Axle delivers smooth, effective indirect illumination. Highly flexible, Axle can be installed as individual luminaires (up to 8') or in continuous runs. LED boards and on-board driver are accessible without removing the luminaire. ORDER GUIDE up to 126 lm/w performance AXLWAI APO LED LUMINAIRE ID OPTICS LIGHT SOURCE CRI LUMEN PACKAGES COLOR TEMP. AXLWAI - Axle wall APO - Ajustable Asymmetric LED - high performance LED 80-80CRI 350 - eco low output 350lm/ft 30-3000k asymmetric indirect Projecting Optic 90-90CRI 550 - low output 550lm/ft 35-3500k 750 - med output 750lm/ft 40-4000k 950 -high output 950lm/ft 1200 - ultra high output 1200lm/ft LUMINAIRE LENGTH VOLTAGE DRIVER ELECTRICAL Standard sections - 2', 3', 4', 5' & 8' 120-120V D - dimming 0-10V 1-1 circuit For all other specify length 277-277V DA - Dali +#EB - emergency battery pack (for min 4' fixture) #FT - nominal length in feet UNV - 120V-277V LA2 - Lutron Hi-Lume A - 2 wires 120V +#EM - emergency light circuit #IN - length in inches 347-347V LA3 - Lutron Hi-Lume A - 3 wires /EcoS +#NL - night light circuit LEH - Lutron EcoSystem H LE5 - Lutron EcoSystem 5 OTH - other (consult factory) MOUNTING MOUNTING PLATE FINISH OPTIONS ARM6 - Cantilever arm 6" 44W - 4" by 4" white plate W - matte white CU - custom ARM12 - Cantilever arm 12" 44AL - 4" by 4" aluminum plate AL - aluminum ARM18 - Cantilever arm 18" 24W - 2" by 4" white plate CF# - custom finish specify RAL# ARM# - Cantilever arm custom length (max 24") 24AL - 2" by 4" aluminum plate 4RW - 4" round white plate 4RAL - 4" round aluminum plate See page 2 for ordering code detailed information CROSS SECTION OPTICS LIGHT DISTRIBUTION 2 11/16" 2ft 6" 3 11/16" 18" AXLWAI - Axle wall 6" cantilever arm APO - Asymmetric Projecting Optics With an 18" arm File Name: AXLE-WALL-ASYM-INDIRECT-SPEC Page: 1 / 5
AXLE LED WALL ASYMMETRIC INDIRECT W W W. L U M E N W E R X. C O M OPTICS ASYMMETRIC PROJECTING OPTIC (APO) - Cartridge-mounted, linear LED arrays are paired with precisely formed semi-specular reflector for smooth light distribution and a 95 0 beam spread. The LED array is protected by a clear acrylic cover. In an indirect orientation, peak intensity occurs at 120º above nadir with a peak-to-zenith intensity ratio of 5.2:1. AT 4000K - APO eco low output 4000K 11 1400 125 low output 4000K 17.5 2200 126 medium output 4000K 24.5 3000 123 high output 4000K 31.5 3800 121 ultra high output 4000K 40.5 4800 119 Field Adjustable Aiming (15 options) LIGHT DISTRIBUTION 0º 330º 2ft 18" 10ft AXLWAI-APO-LED-80-350-40-20FT Luminaire = 58W (for 20ft) Room Size: L=20ft x H=10ft x W=10ft Mounting Height = 8Ft from the floor The Axle housing can be field rotated to provide either indirect (ceiling) or direct illumination. Detents in 15º increments permit precise aiming. Foot Candles on 20' wide ceilling 26.7 65.3 29.9 11.0 6.5 95º 120º Peak Angle 29.5 75.9 35.4 12.6 7.1 29.9 78.0 37.5 13.5 7.4 29.8 78.2 38.1 13.9 7.9 29.9 78.2 38.3 14.1 8.2 29.9 78.2 38.2 14.1 8.2 LIGHT SOURCE - LED Custom linear array of mid-flux LED's are cartridge-mounted to facilitate service and thermal management. Available in 3000K, 3500K and 4000K with a minimum 80 CRI and an option for 90 CRI with elevated R9 value. consistency are maintained to within 3 SDCM. LEDs operate at reduced drive current to optimize efficacy and lumen maintenance. All LEDs have been tested in accordance with IESNA LM-80-08 and the results have shown L80 lumen maintenance greater than 60,000 hours. Absolute product photometry is measured and presented in accordance with IESNA LM-79, unless otherwise indicated. 29.8 78.2 38.1 13.9 7.9 29.7 77.9 37.5 13.5 7.5 29.3 75.8 35.3 12.5 7.1 27.3 65.0 29.8 10.9 6.4 LUMINAIRE LENGTH Axle is available in individual lengths up to 8'. The mounting hub provides connections for installation in continuous rows, allowing each luminaire to be aimed independently. ELECTRICAL Factory-set adjustable output current electronic driver with 120-277V AC line input. Dimmable from at least 100%-5% with 0-10V control. Rated life (90% survivorship) of 50,000 hours at 50ºC max. ambient (and 70ºC max. case) temperature. Terminal block connections for easy service. At maximum driver load: Efficiency>84%, PF>0.9, THD<20%. Other specifiable options include Lutron Hi-Lume A (specify 2, 3, or 4 wires), EcoSystem H (100%-1%, fade-to-black) and EcoSystem 5 (100%-5%) dimmable drivers and DALI protocol drivers. File Name: AXLE-WALL-ASYM-INDIRECT-SPEC Page: 2 / 5
AXLE LED WALL ASYMMETRIC INDIRECT W W W. L U M E N W E R X. C O M MOUNTING Axle is wall mounted using fixed steel arms, 6", 12" or 18" long. Arm mounting provides concealed wiring and connects to outlet boxes using 4" square and round mounting plate and 4" x 2" plate are also available. 6 12 18 MAINTENANCE LED boards are removable from the cartridge for easy replacement. Both cartridge and driver are accessible without removing the luminaire. WEIGHT AXLE 4ft - 3.2Kg - 7lb AXLE 8ft - 6.3Kg - 14lb CERTIFICATIONS ETL - Rated for Dry/Damp locations. Conforms to UL Standard 1598 and certified to CAN/CSA Standard C22.2 No. 250.0. MOUNTING PLATES WARRANTY LumenWerx provides a five-year limited warranty of electrical and mechanical performance of the luminaires, including the LED boards, drivers, and auxiliary electronics. LumenWerx will repair or replace defective luminaires or components at our discretion, provided they have been installed and operated in accordance with our specifications. Other limitations apply, please refer to the full warranty on our website. 4" x 2" 4" x 4" 4" FINISH Interior - Natural aluminium inner extrusion and 95%, reflective white brackets Exterior - White or aluminum powder coating. EMERGENCY Factory installed long life high temperature recyclable Ni-Cad battery pack with test switch and charge indicator, minimum of 90 minutes operation, up to 1000 lumens per 4ft (25ºC) emergency lighting output. Recharge time of 24 hours. CONSTRUCTION Housing - extruded aluminum 0.090" nominal thickness Reflector - semi-specular anodised aluminum sheet 0.020" Reflector bracket - extruded aluminum 0.090" nominal thickness / Natural finish) Lens - Extruded Clear Acrylic 0.050" nominal thickness Interior Brackets - 22 GA CRS / Painted White End-caps - die-cast aluminum Joiner - die-cast aluminum Cantilever - rectangular cold rolled steel tube with welded mounting plate File Name: AXLE-WALL-ASYM-INDIRECT-SPEC Page: 3 / 5
AXLE LED WALL ASYMMETRIC INDIRECT W W W. L U M E N W E R X. C O M 350 LUMEN AT 80CRI - ECO LOW OUTPUT eco low output 3000K 12 1400 117 240 eco low output 3500K 11.5 1400 121 eco low output 4000K 11 1400 125 480 719 959 550 LUMEN AT 80CRI - LOW OUTPUT low output 3000K 18.5 2200 118 377 low output 3500K 18 2200 122 low output 4000K 17.5 2200 126 754 1131 1507 750 LUMEN AT 80CRI - MEDIUM OUTPUT medium output 3000K 26 3000 115 514 medium output 3500K 25 3000 119 medium output 4000K 24.5 3000 123 1028 1542 2046 File Name: AXLE-WALL-ASYM-INDIRECT-SPEC Page: 4 / 5
AXLE LED WALL ASYMMETRIC INDIRECT W W W. L U M E N W E R X. C O M 950 LUMEN AT 80CRI - HIGH OUTPUT high output 3000K 33.5 3800 114 651 high output 3500K 32.5 3800 117 high output 4000K 31.5 3800 121 1302 1953 2604 1200 LUMEN AT 80CRI - ULTRA HIGH OUTPUT ultra high output 3000K 43 4800 111 822 ultra high output 3500K 41.5 4800 115 ultra high output 4000K 40.5 4800 119 1644 2467 3289 File Name: AXLE-WALL-ASYM-INDIRECT-SPEC Page: 5 / 5
AXLE LED WALL ASYMMETRIC DIRECT W W W. L U M E N W E R X. C O M DESCRIPTION PROJECT: Axle is an elegant and compact LED linear accent luminaire providing efficient asymmetric light distribution. TYPE: Softly curved, Axle measures just NOTES: 2 11/16" by 3 11/16". With adjustable optics, light output from 350 to 1200 lumens per foot (nominal), and efficacy up to 126, Axle delivers smooth, effective direct illumination. Highly flexible, Axle can be installed as individual luminaires (up to 8') or in continuous runs. LED boards and onboard driver are accessible without removing the luminaire. ORDER GUIDE up to 126 lm/w performance AXLWAD APO LED LUMINAIRE ID OPTICS LIGHT SOURCE CRI LUMEN PACKAGES COLOR TEMP. AXLWAD - Axle wall APO - Ajustable Asymmetric LED - high performance LED 80-80CRI 350 - eco low output 350lm/ft 30-3000k asymmetric direct Projecting Optic 90-90CRI 550 - low output 550lm/ft 35-3500k BAF - white baffles overlay 750 - med output 750lm/ft 40-4000k 950 - high output 950lm/ft 1200 - ultra high output 1200lm/ft LUMINAIRE LENGTH VOLTAGE DRIVER ELECTRICAL Standard sections - 2', 3', 4', 5' & 8' 120-120V D - dimming 0-10V 1-1 circuit For all other specify length 277-277V DA - Dali +#EB - emergency battery pack (for min 4' fixture) #FT - nominal length in feet UNV - 120V-277V LA2- Lutron Hi-Lume A - 2 wires 120V +#EM - emergency light circuit #IN - length in inches 347-347V LA3 - Lutron Hi-Lume A - 3 wires /EcoS +#NL - night light circuit LEH - Lutron EcoSystem H LE5 - Lutron EcoSystem 5 OTH - other (consult factory) MOUNTING MOUNTING PLATE FINISH OPTIONS ARM6 - Cantilever arm 6" 44W - 4" by 4" white plate W - matte white CU - custom ARM12 - Cantilever arm 12" 24W - 2" by 4" white plate AL - aluminum ARM18 - Cantilever arm 18" 4RW - 4" round white plate CF# - custom finish specify RAL# ARM# - Cantilever arm custom length (max 24") 44AL - 4" by 4" aluminum plate 24AL - 2" by 4" aluminum plate 4RAL - 4" round aluminum plate See page 2 for ordering code detailed information CROSS SECTION OPTICS LIGHT DISTRIBUTION 18" 6" 2 11/16" 3 11/16" AXLWAD - 6" cantilever arm APO - Asymmetric Projecting Optics With an 18" arm File Name: AXLE-WALL-ASYM-SPEC Page: 1 / 5
AXLE LED WALL ASYMMETRIC DIRECT W W W. L U M E N W E R X. C O M OPTICS ASYMMETRIC PROJECTING OPTIC (APO) - Cartridge-mounted, linear LED arrays are paired with precisely formed \semi-specular reflector for smooth light distribution and a 95 0 beam spread. The LED array is protected by a clear acrylic cover. In a direct orientation, peak intensity occurs at 30º below nadir with a peak-to-zenith intensity ratio of 5.2:1. OPTIONAL BAFFLES (BAF) - Optional die-formed sheet metal white baffle with blades spaced 0.5" apart provides lateral shielding and can be fieldinstalled. LIGHT SOURCE - LED Custom linear array of mid-flux LED's are cartridge-mounted to facilitate service and thermal management. Available in 3000K, 3500K and 4000K with a minimum 80 CRI and an option for 90 CRI with elevated R9 value. consistency are maintained to within 3 SDCM. LEDs operate at reduced drive current to optimize efficacy and lumen maintenance. All LEDs have been tested in accordance with IESNA LM-80-08 and the results have shown L80 lumen maintenance greater than 60,000 hours. Absolute product photometry is measured and presented in accordance with IESNA LM-79, unless otherwise indicated. AT 4000K - APO eco low output 4000K 11 1400 125 low output 4000K 17.5 2200 126 medium output 4000K 24.5 3000 123 high output 4000K 31.5 3800 121 ultra high output 4000K 40.5 4800 119 Field-Adjustable Aiming (15 options) 330º 0º LIGHT DISTRIBUTION 18" AXLWAD-APO-LED-80-350-40-20FT Luminaire = 58W (for 20Ft) Ceiling Height = 10ft Length of Wall = 20ft Arm Bracket = 18 inches The Axle housing can be field-rotated to provide either indirect (ceiling) or direct illumination. Detents in 15º increments permit precise aiming. Foot Candles on 20' length wall 13.7 14.6 15.3 14.6 14.6 14.6 14.6 15.2 14.4 12.9 74.3 85.3 87.2 86.8 86.8 86.8 86.8 87.1 85.1 73.4 34.5 41.6 43.7 44.1 44.2 44.2 44.1 43.6 41.5 33.5 95º 9.9 11.5 12.4 12.8 12.9 12.9 12.8 12.4 11.4 9.5 4.5 5.1 5.5 5.8 5.8 5.8 5.7 5.5 5.0 4.3 LUMINAIRE LENGTH 120º Peak Angle Axle is available in individual lengths up to 8'. The mounting hub provides connections for installation in continuous rows, allowing each luminaire to be aimed independently. File Name: AXLE-WALL-ASYM-SPEC Page: 2 / 5
AXLE LED WALL ASYMMETRIC DIRECT W W W. L U M E N W E R X. C O M ELECTRICAL Factory-set adjustable output current electronic driver with 120-277V AC line input. Dimmable from at least 100%-5% with 0-10V control. Rated life (90% survivorship) of 50,000 hours at 50ºC max. ambient (and 70ºC max. case) temperature. Terminal block connections for easy service. At maximum driver load: Efficiency>84%, PF>0.9, THD<20%. Other specifiable options include Lutron Hi-Lume A (specify 2, 3, or 4 wires), EcoSystem H (100%-1%, fade-to-black) and EcoSystem 5 (100%-5%) dimmable drivers and DALI protocol drivers. MOUNTING Axle is wall mounted using fixed steel arms, 6", 12", or 18" long. Arm mounting provides concealed wiring and connects to outlet boxes using 4" square and round mounting plates and 4"x 2" plates are also available. 6 12 18 CONSTRUCTION Housing - extruded aluminum 0.090" nominal thickness Reflector - semi-specular anodised aluminum sheet 0.020" Reflector bracket - extruded aluminum 0.090" nominal thickness / Natural finish) Lens - Extruded Clear Acrylic 0.050" nominal thickness Interior Brackets - 22 GA CRS / Painted White End-caps - die-cast aluminum Joiner - die-cast aluminum Cantilever - rectangular cold rolled steel tube with welded mounting plate Baffles - white sheet metal MAINTENANCE LED boards are removable from the cartridge for easy replacement. Both cartridge and driver are accessible without removing the luminaire. WEIGHT AXLE 4ft - 3.2Kg - 7lb AXLE 8ft - 6.3Kg - 14lb CERTIFICATIONS ETL - Rated for Dry/Damp locations. Conforms to UL Standard 1598 and certified to CAN/CSA Standard C22.2 No. 250.0. WARRANTY LumenWerx provides a five-year limited warranty of electrical and mechanical performance of the luminaires, including the LED boards, drivers, and auxiliary electronics. LumenWerx will repair or replace defective luminaires or components at our discretion, provided they have been installed and operated in accordance with our specifications. Other limitations apply, please refer to the full warranty on our website. MOUNTING PLATES 4" x 2" 4" x 4" 4" FINISH Interior - Natural aluminium inner extrusion and 95%, reflective white brackets Exterior - White or aluminum powder coating. EMERGENCY Factory installed long-life, high temperature, recyclable Ni-Cad battery pack with test switch and charge indicator, minimum of 90 minute operation, up to 1000 lumens per 4ft (25ºC) emergency lighting output. Recharge time of 24 hours. File Name: AXLE-WALL-ASYM-SPEC Page: 3 / 5
AXLE LED WALL ASYMMETRIC DIRECT W W W. L U M E N W E R X. C O M 350 LUMEN AT 80CRI - ECO LOW OUTPUT eco low output 3000K 12 1400 117 240 eco low output 3500K 11.5 1400 121 eco low output 4000K 11 1400 125 480 719 959 550 LUMEN AT 80CRI - LOW OUTPUT low output 3000K 18.5 2200 118 377 low output 3500K 18 2200 122 low output 4000K 17.5 2200 126 754 1131 1507 750 LUMEN AT 80CRI - MEDIUM OUTPUT medium output 3000K 26 3000 115 514 medium output 3500K 25 3000 119 medium output 4000K 24.5 3000 123 1028 1542 2056 File Name: AXLE-WALL-ASYM-SPEC Page: 4 / 5
AXLE LED WALL ASYMMETRIC DIRECT W W W. L U M E N W E R X. C O M 950 LUMEN AT 80CRI - HIGH OUTPUT high output 3000K 33.5 3800 113 651 high output 3500K 32.5 3800 117 high output 4000K 31.5 3800 121 1302 1953 2604 1200 LUMEN AT 80CRI - ULTRA HIGH OUTPUT ultra high output 3000K 43 4800 111 822 ultra high output 3500K 41.5 4800 115 ultra high output 4000K 40.5 4800 119 1644 2467 3289 File Name: AXLE-WALL-ASYM-SPEC Page: 5 / 5