NEW or NEWLY MANUFACTURED SPARES FOR RUDGE MOTORCYCLES

Part No Description Application Price (excl P & P) ENGINE PARTS M2898 x 4 Oil pump operating peg (set pin) All 1931-39 (excl 5.50 1933 Ulster & TTR) M2603 x 8 OH rocker bearing ring RH 1930-36 Special 12.00 M2603 x 10 OH rocker bearing ring LH 1930-36 Special 12.00 M3816 x 2 Rocker support bolt nut (D shaped nut) All Ulster 1933-36 1.50 Replacement KMC22 drive side ball race (3mm thinner race with spacers - 22 x 50 x 14 - limited stock) Main bearing MRJ 7/8 C3 fit (required for Rudge engines) see Remedies No 9. Main bearing MRJ 7/8 C3 fit (required for Rudge engines) OVERSIZE OUTER RACE TO FIT WORN HOUSINGS. All 500cc/350cc 1930 to 1939 All 500/350cc 1930-39 All 500/350cc 1930-39 22.00 30 each 35 each Rubber HT lead All 1925-39 1.25/ft M3063x4 Decompressor spring (behind cam followers) All 1931 to 39 1.30 NOS Lodge HL14S detachable spark plug 1939 Aluminium 7.50 (boxed) long reach Ulster only NOS Lodge H14S detachable spark plug (boxed) short ½ reach. Original recommended fitment. All Ulsters with 14mm plug EXCEPT 1939 Ulster with aluminium head 10.00 Rear cylinder oil pipe (complete unchromed) All 500 1931-36 10.00 50565 Rear cylinder oil pipe (complete unchromed) All 500 1937-39 10.00 Rear cylinder oil feed union (screws into base All 1930 39 excl 3.50 of barrel) (included on the complete pipe above) 250cc Cylinder liner (85mm x 89mm) All 500 1930-39 30.00 Cylinder liner (85mm x 88.9mm) flanged All 500 1930-39 30.00 M3575x4 Timing side flywheel axle All 500/350 1932-9 45.00 52706 (excl TTR) Piston rings 85mm + 0.020 and +0.060 All 500cc 1930-39 6.50 each M2590 x 1 Timing side flywheel axle 1929-30 45.00 Oil Tell Tale seal kit fix that leaking tell tale All 1926-39 3.50 - comprises new neoprene seal & plunger spring (full instructions & no machining required). Tell tale parts available also. Oil tell tale plunger All 1926-39 1.50 M4427x1 (modified) Oil tell tale plunger spring All 1926-39 0.80 Modified Tappet cup (on valve rod) for use All 1935 36 (will fit 4.25 with BMC A series pushrod modification. earlier models) (see below) Rocker worn through? Pushrod/rocker modification kit (2 pushrods and ball ends to fit into rocker (some machining required). With full instructions. All open valve machines 15.00 M2991 x 2 Exhaust valve lifter pivot pin All 1931-36 Specials 4.00 M3082x1 Exhaust valve lifter adjuster All radial & semi 3.00 radials excl 1937-9 Ulster M341x7 NOS Exhaust valve spring (flat wire) Multi 1911-23 6.00 M3021x3 RH rocker bearing pin. Can be ground oversize if required for use with metric rollers. 1933-36 Ulster 8.00 Partslist104.doc 1 Dec 2008

¼ x ¼ big end roller STD 1936-9 Ulster 12.00 set of 36 ¼ x 5/16 big end roller STD 1935-9 Special 12.00 set of 24 Dynamo drive chain (genuine Renold) - All 1931-39 500/350 7.00 endless cc (excl TTR) Magneto drive chain (genuine Renold) 36 All 1931-39 500/350cc 6.50 links - endless (excl TTR) M4427x1 Tappet cup (on valve rod) All 1935 36 (will fit 4.25 earlier models) M3496 x 4 Inlet valve (1/4 stem) Original old G & S 1933-36 Ulster inlet 14 each stock (2 only left) M3871x3 Intermediate oil pump drive wheel (wheel 1932-3 TT Replica & 36 only) 1933 Ulster 51225 Camshaft (without gear wheel) 1937-39 Ulster 95 51227 Camshaft (without gear wheel) 1937-39 racing profile 100 M2985 x 1 Camshaft (without gear wheel) 1934-36 Ulster 95 Camshaft (without gear wheel) 1931-36 Racing profile 100 Cam followers (re-ground & rehardened original Rudge manufacture) 1931-9 (all types) 45 pr WHEN AVAILABLE Dowty neoprene sealing washers (for oil All 1931-39 0.30 each unions) M3137 x 3 Valve tappet guide All 250cc 10.00 M240 x 3 Inlet rocker bush (oversize, ground to your dimension) All F head multi/multwin 12.00 Gudgeon pins, standard with end pads (non circlip type) Gudgeon pins, 0.005 oversize with end pads, non circlip type Slipper Piston, 3 ring as per Ulster NOT GOLD STAR - STD. +0.040 and 0.060 All 500cc 1928-39 18.00 All 500cc 1928-39 18.50 All 500cc 1931-9 140 M4076 x 1 Exchange reconditioned conrod Ulster & Special 1934 & 1935 only M4542 x 1, Exchange reconditioned conrod All 500cc 1936-39, 52528 Ulster & Special 120 120 GEARBOX & CLUTCH PARTS G/Box layshaft spindle kit (comprising new spindle and caged roller bearing for layshaft). With full fitting instructions. All 350/500cc 1925-39 (state year or long/short shaft) 34.00 M4124x2 Standard G/box layshaft spindle All 350/500cc 1925-28.00 (59322)/ L283x11 39 (state year or long/short shaft) Neoprene o ring for gearbox 4 th speed wheel All 1936-39 1.00 Oilite bush for 4th speed wheel (2 required) 1936-9 500cc 10.00 each M2594x11 Gearbox gearchange peardrop spring (control All footchange models 1.30 ratchet body spring) L523x6 Selector quadrant plunger spring All 1927 39 350cc & 1.30 500cc L481 x 4 G/Box driving shaft bush All 350/500 1925-39 5.50 (58601) (bush in end of gearbox mainshaft) M2594x7 Control ratchet pawl (gearchange peardrop All footchange models 8.00 65916 pawl) Gearbox mainshaft timing side roller bearing conversion kit (replaces bearing ring and All 500/350 1928-39 22.00 Partslist104.doc 2 Dec 2008

rollers to correct shaft wear). With full fitting instructions. M4314x2 Large Operating rod (clutch mushroom) All 500cc 1935-39 3.50 (59827) L498x6 Clutch pushrod (short) All 500cc 1935-39 1.50 (59856) M4317x3 Clutch pushrod (long) All 500cc 1935-39 2.75 (59826) Clutch outer dome cover screws & nuts All 1935-39 500cc 2.00 set 12 3/16 x 3/16 rollers for modified clutch All 1928-39 4.50 set of 25 centre bearing race Magnetic gearbox drain plug All models 4.50 L312x8 Kick starter stop rubber 1927-29 3.50 35506 (C91) ½ steel ball All footchange 0.30 each gearboxes MISCELLANEOUS PARTS 35505 (C98) 3/8 steel ball for wheels All 1927-39 excl 250cc 0.18 each M2742x2 Fork spring distance piece (under fork spring) All 1930 39 (excl 1.50 250cc) Fork spring covers (unchromed). Machined 1931-6 Ulster/TTR 35pr ends as per drawing (not pressed) 64123/64103 Fork spring sheaths (covers) (unchromed). Machined ends as per drawing (not pressed) 1937-9 Ulster 50 pr 64129/64108 Fork springsheaths (covers) (unchromed). Machined ends (not pressed) 1937-9 Special 45 pr Rudge Research CD-ROM containing ALL All models 15.00 the spares lists produced by the company from 1910 to 1939 plus Miller catalogues, petrol tank information, C series nuts/bolts dimensions, speedo cable information and more! (370 pages of information). Restoration Guide for the 1933 Ulster on CD. 1933 Ulster 9.00 Over 40 photos of a restored machine plus restoration notes, road test, factory handbook, catalogue, spares list and technical details a must for the 1933 Ulster restorer! Restoration Guide for the 1928 Special on 1928 Special 9.00 CD. Over 40 photos of a restored machine plus restoration notes, road test, factory handbook, catalogue, spares list and technical details a must for the 1928 Special restorer! Restoration Guide for the 1937-39 Sports 1937-39 Sports Special Available soon Special on CD. Over 40 photos of a restored machine plus restoration notes, road test, factory handbook, catalogue, spares list and technical details a must for the Sports Special restorer! M2992 x 2 Top pushrod cover (valve tappet tube) 1931-6 Special 7.50 Partslist104.doc 3 Dec 2008

(unchromed) M2992 x 2 Top pushrod cover (valve tappet tube) has 1933-6 Ulster 7.50 different locating peg to Special (unchromed) 76514 Rear number plate All 1936-39 17.00 13196 Mechanism shield distance nut (long hex nut All 250 1936-39 3.50 at rear of mechanism shield) M3605x3 Footchange pedal rubber to original drawing All footchange models 3.00 65961 & pattern 1932-39 Kickstart rubber to original drawing & All 1929 39 excl 4.25 pattern TTR L199 Mudguard stay kit (with rolled threads) Various models up to 8.50 set (2 stays) 1936 M2273 x 10 Steering damper leather washer (fits under All 1928 to 1934 0.50 damper arm on tank) 63957 Fork rebound rubber All 1936-39 4.00 set of 4 L312 x 8 Kickstarter stop rubber (external to gearbox) All 1927-29 3.00 Miller dynamo double plug (moulding only) All dynamo models 1.50 Miller dynamo double plug (complete) All dynamo models 8.00 Handlebar lug casting (in bronze) All TT replicas 30 (unmachined) (1 left) M2006 x 4 Seat stay U bolt (as original with rolled All 500/350 1928-33 5.00 pr threads) Incl TT Replica L255 x 7 Seat stay U bolt (as original with rolled All 250 1929-33 5.00 pr threads) 52767 Rear wheel taper bearing All 500cc 1937-39 12.00 each C17 ¼ ball bearing for steering head All 1925-39 3.60 set of 36 M2702x8 Centre stand anchor pin (small) All 350/500cc 1930-39 2.25 (13463) M2703x3 Centre stand spring anchor pin (long) All 1931-9 2.00 13464 M2997x4 Rear wheel spindle 1931-36 350cc/500cc Available soon M4271x1 Fork spring bolt cupped washer (inside spring 1933-39 0.60 sheaths) Badge for Rudge Revulator (fitted to front of Revulators 9.00 revulator case) stainless steel exact copy of original NPB item. Revulator glasses, needle bushes, needles & Revulators Please enquire knobs Rudge Revulator Exact copy of the famous 70 Revulator including the patent badge. A speedo sized instrument fitted to 1936 Rudges (but often kept by owners for later machines) designed to calculate engine revolutions for any road speed and gear. Mounted on one side of a dual speedo revulator mounting plate. Need an 8 day clock? New case (as 30 chronometric speedo) with mounting studs, bezel, glass, & seal ready for your face & digital mechanism Sparking plug copper/asbestos washer 14mm and 18mm 0.35 (genuine Lodge) (State size) M2115 x 7 Wiring spring clip faithful reproduction of All models with Miller 1.50 each 75741 the Miller wiring clip used to secure the wiring around the rear mudguard bead electrics C30 Nut (plated) fits cylinder base and many other applications various 1.00 pkt of 6 M2539 x 6 Rear bolt for top & bottom shackles (fork spindle) OVERSIZE (+0.015 ) to reclaim worn shackles) All 1930-37 350cc/500cc (NOT 1938/9) 13.50 Partslist104.doc 4 Dec 2008

M2030 x 1 NEW or NEWLY MANUFACTURED SPARES FOR RUDGE MOTORCYCLES Rear bolt for top & bottom shackles (fork spindle) OVERSIZE (+0.015 ) to reclaim worn shackles) All 1927-9 350cc/500cc and all 250cc 1931-9 13.50 M2506 x 7 Rear wheel sprocket (new old stock) 48 teeth 1929, 1930 Secial, 35 Ulster & 350cc PETROL TANK FITTINGS M2116 x 10 Petrol tank equalising pipe All 250 1931-33 9.00 M 2116 x 8 Petrol tank equalising pipe All ex Rep 1928-36 9.00 50522 Petrol tank equalising pipe All 1937-39 9.00 M 2116 x 5 Petrol tank equalising pipe All 1928 only 9.00 L115 x 3 Petrol tank equalising pipe union (in tank) All 1927-36 3.50 Petrol pipe union kit 2 union nuts and pipe nipples. (just supply the ¼ copper pipe and make your own petrol pipe) 66256 Petrol tank filter plug (the part the petrol tap screws into) All models with coppper petrol pipe 1937-39 250/500cc (will fit earlier tanks) 3 per set of 4 items 4.50 STAINLESS STEEL PARTS M2745x1 Chaincase & gearbox cover screw (long) All 1930-39 0.65 (C59) M2745x9 Chaincase & timing cover screw (short) All 1930-39 0.65 (C60) M2745x2 Timing cover screw (long) All 1930-39 0.65 (C82) M2745x10 Gearbox screw (flat head) All 1936-39 0.65 (C104) M2745x11 Gearbox end cover hex headed bolt All 350cc/500cc 1931-1.30 (C85) 13379 (originally 9mm A/F, these are 1/8 whit (0.338 ) 39 M2690 x 1 Oil pipe union nut (banjo) All 1930-39 2.75 each 69153 Electric Horn distance piece (stainless steel) All 500cc 1937-39 1.00 M 2981x1 (C84) 13180 Crankcase bolt nut (top rear spacer to chaincase) (ss) All 1932 39 350/500 1.75 M1911 x? Gear Control Rod (stainless steel) All models (please 7.50 state model) 74717 Rear brake rod (stainless steel) All 500 1937-39 7.00 M3243x2 Rear brake rod (stainless steel) All 1932-36 7.50 (350/500cc) M2306 x 2 Rear brake rod spring (stainless steel) All 1928-39 1.50 74835 M2244 x 13, Rear brake rod adjusting nut All 1928-39 4.50 (13137) M2244 x12 Rear brake rod bush (SS) All 1928-39 1.80 (74821) M4220 x 1 Rear chainstay to seat stay mudguard nut All 500 1935-39 2.50 (13185) (with sleeve) (SS) M4114 x 2 Exhaust finned clamp bolt All 1934-39 2.50 (13398) M4528 x 1 ½ nut - Rear wheel spindle nut 250cc plus 1.50 (C43) (T257x3) other uses including forks up to 1935. 13531 Speedo support plate screw (ss) All 500 1937-39 0.30 M2686x3 13461 C75 M3643x6 13391 Mechanism shield thumbscrew, rocker cover screw (Special) & battery cover centre screw Chaincase inspection cover spring clip fixing screw All 500 1934-39 1.50 All 1932-39 1.25 Partslist104.doc 5 Dec 2008

M2726x4 13465 654x9,13040 C30 L280x4, 13060, C1 2039x8, 13050, C5 M4525x1, 13187, C3 M4526x1, 13188, C42 M4524x1, 13174, C19 M3062 x 1, 13043,C22 M4518 x 2, C94, 13177 M4671 x 1, (74448) M2513 x 10 (13407) M1176x3 C63, 13626 M1778 x 10 13803 M1867 x 7 13350 M3223 x 3 & M3223 x 2 (13479 & 13478) Chaincase fixing screw (bottom) (5/16 ) All 500/350 1932-39 1.50 Nut many uses, cylinder barrel etc All 1930-39 0.70p Nut for engine bolts, chainstay bolts etc All 1928-39 0.90p Nut many uses, forks etc All 1928-39 0.70p Nut many uses, gearbox bolts etc All 1928-39 0.75p Thin nut many uses, crankcase etc All 1928-39 0.70p Nut many uses, rear sprocket etc All 1928-39 0.65p Nut 5/16 BSCY many uses including rocker gear on open valve Ulsters & radial 250cc All 1928-39 0.65p Nut (5/16 slim) clutch adjuster lock nut, All 1936-39 500cc 0.65p rocker adjuster lock nut Front Brake adjuster (for round section forks) All 500cc 1936-39 6.50 Also 1936 250cc Handlebar clamp bolt All 1930-39 1.50 Tool box hinge (for triangular type toolboxes) All 1931-39 4.50 Timing cover screw set 1928/29 500cc Special & Sports 20 set Drain plug, engine and chaincase All 1928-39 2.50 Gearbox external stop assembly (stainless) All 1927-29 9.00 comprising stud, spacers nut and rubber Headlamp bracket attachment bolt 1936-39 1.20 Magneto strap fixing bolt (top) All 1928-39 2.80 350cc/500cc Timing gear cover and magneto cover screw set (11 screws) All 1931-33 350cc/500cc. Also 1934-9 but EXCLUDES mechanism shield mounting) 7.50 Magneto fixing strap pins (pair) All 1931-39 6.50 T343 x 14 C86, M4531 x 1, 13816 Magneto fixing strap pins Gearbox stud washer (under the head of cover nuts) (14 required per gearbox) Gearbox cover bolt washer (dished). Fitted under the head of 2 of the cover bolts C85 All 1928 1930 with 6.50 magneto 1926-29 gearboxes 0.15 All 1931-39 350 & 500cc 0.15 M2079 x 2 (13551) Oil Tell Tale complete All 30-39 excl TTR 17 Oil Tell Tale complete 1928/9 Special & Sports 17 Carburetter flange bolt All 500cc & 350cc 2.30 1928 to 1939 M2995 x 5, Gearbox filler, chaincase filler plug from 1930 to 1936 various 6.00 Partslist104.doc 6 Dec 2008

C61 1932-36, oil pump end plug LH 1931-6 500cc, 350cc & 250cc M2995 x 4 Oil pump end plug RH 1931-6 500cc, 350cc & 250cc 1931 to 1936 various 6.75 51548/51549 Oil pump end plug RH & LH 1937-9 Special, Ulster & Sports special 16.00 pr SECONDHAND PARTS Now on a separate listing LITERATURE Original 1933-34 spares list clean condition 12.00 Pitman s Book of the Rudge (5 th edition) 14.00 Good condition SERVICES Modify pushrod rockers with BMC ball pins All pushrod rockers 20 per rocker Fit &line ream new oil pump bushes (excl All horizontal pumps 40.00 bush cost) Grind camshaft bearing surfaces (when fitting All 500cc/350cc 1931-15.00 secondhand camshaft into new camshaft bushes to rectify ovality) 39 Rebuilding an engine or gearbox? Special tool loan service including cam support plate and timing pinion extractor for valve timing and gearbox selector strap etc. All 500cc 1931-9 Please enquire Oversized main bearings (for loose housings) and oversized oil pump bushes Hone 1937-9 Ulster exhaust rocker bores for oversize bushes. Re-tube Special or Ulster cylinder heads oil pipes (using your unions) All 500cc 1931-9 All Ulsters 1937-9 All Specials/Ulsters 1937-9 Please enquire Please enquire 15 Fit & line ream camshaft bushes All 500cc 1931-39 25 Clutch centre grooved? Clutch centre bearing All 20 track ground down, build up and reground to standard cheaper than a new centre! Hone big end (conrod) for oversized rollers and rectify ovality. Please send pin & rollers with rod. All 1934-9 500cc 20 Rudge Remedies (all 1.50 including p & p note those marked # are FREE with appropriate modification kits): No 3 Pushrod & pushrod rocker modification All 1924 36. No 4 - Oil pump inspection & overhaul - 1930 Ulster, Special, 1931-33 350/500cc TT Replica and 1933 Ulster. No 5 - Oil pump inspection & overhaul - all road models from 1931 excluding 1933 Ulster #No 6 - Gearbox layshaft bearing modification for 500cc gearboxes 1925-39. #No 7 - Gearbox mainshaft timing side bearing modification for 350/500cc gearboxes 1925-39. #No 8 Oil pump tell-tale seal modification No 9 Main Bearing inspection & replacement 500cc/350cc 1930 to 1939 No 10 - Wet sumping & oil tank filters road machines from 1932 No 11 Crankshaft overhaul 500cc machines 1934-39 under revision No 12 Fork Spring sheaths (covers) assembly details all models from 1930 No 13 Coupled Brakes full details of the interconnection & setup including parts required Partslist104.doc 7 Dec 2008

Rudge parts manufactured to pattern or drawing. Gearbox overhauls a speciality surplus gearbox parts always wanted. Remember to add postage & packing, UK 15% of order, Europe 20%, rest of world 30% (except #) Please order from: Colin Chapple, 82 Chesterton Ave, Harpenden, Herts, AL5 5ST Tel: 01582 766442. E-Mail: rudging@btinternet.com Partslist104.doc 8 Dec 2008