HDD CATALOG VOL8 PRODUCTS. straightlinehdd.com

HDD PRODUCTS straightlinehdd.com 800.654.3484 CATALOG VOL8

ABOUT US StraightLineHDD innovation began in 1989 when our first HDD directional drill rolled off the assembly line. From those early days as a HDD pioneer, to today as a leading manufacturer of down hole tooling our focus is to deliver products and services that make our customers more profitable. INNOVATION THROUGH LISTENING Early on, we understood our success was connected to our customers success. That s why we place a high value on listening. As a result, every aspect of our business from our experienced sales team, to our engineering and manufacturing divisions is available to resolve customer needs and to assist in the completion of every bore. And if there s a custom solution needed, we maintain a robust fabrication and manufacturing team to quickly build the tool you need. Over the last three decades, we've learned countless lessons from our customers, with each lesson translating into worldclass tooling at industry-leading prices. CUSTOMER SATISFACTION A CORE VALUE Along with the value we ve placed on listening, we ve also realized and embraced the reality that nothing is more unpredictable than earth. Soils change, even within the same bore. This, along with the fact that drilling is not an 8:00 to 5:00 business, places a premium on a nimble and responsive business model. For StraightLineHDD, we take pride in being available all hours, including weekends, to provide the support that critical bores require. Our commitment to 100 percent customer satisfaction results in on-time shipments, a state-ofthe-art manufacturing facility capable of 24-hour turnaround on most orders and a commitment to develop the tooling HDD operators need to operate profitably. We invite you to join the StraightLineHDD team and begin to reap the benefits of working with the most experienced, reliable and committed people in the industry.

CONTENTS Ditch Witch and Subsite are registered trademarks of The Charles Machine Works, Inc., Perry, Oklahoma, USA. Vermeer and Firestick are registered trademarks of Vermeer Manufacturing Company of Pella, Iowa, USA. DigiTrak, DCI and Spot-D-Tek are registered trademarks of Digital Control Inc., of Seattle, Washington, USA. Geological Boring is a registered trademark of Geological Boring LLC of Tacoma, WA, USA. None of these trademarks are in any way associated with StraightLineHDD, INC. DITCH WITCH COMPATIBLE VERMEER COMPATIBLE STRAIGHTLINEHDD 2 3 4 6 8 10 14 18 19 20 21 25 1-Piece Sub-Savers 2-Piece Drive Chucks & Sub-Savers Transition Rods Octagon Collars Transmitter Housings, Housing Jets & Nose Pieces Housing Savers (Tail Pieces) Bits Slide Wrenches Pipe Racks Replacement Tracks Conversion Solutions Drill Pipe 26 28 30 32 33 34 35 36 40 Drill Pipe - Hunting Drive Chucks 1-Piece Sub-Savers Starter Rods Hex Collars Transmitter Housings & Housing Jets Housing Savers (Tail Pieces) Bits Pipe Racks 42 44 45 46 47 48 50 56 76 82 Swivels Adapters Box x Box Transmitter Housings 4th Generation Transmitter Housing Nose Pieces Steering Shoes & Bits Rockeye Hammer System Reamers Mud Mixing Systems Drilling Supplies

1-PIECE SUB-SAVERS DITCH WITCH COMPATIBLE 1703-301-01 Sub-Saver (JT520 Old Style) 2.4 lbs. $199.00 1703-301-02 Sub-Saver (JT520 New Style) 2.5 lbs. $209.00 1703-302-01 Sub-Saver (JT920/JT920L/JT921/JT921L) 5.6 lbs. $239.00 1703-317-01 Sub-Saver (JT922) 11.7 lbs. $249.00 1703-314-01 Sub-Saver (JT1220M1) 11.7 lbs. $419.00 1703-303-01 Sub-Saver (JT1720/JT1720M1) 7.2 lbs. $259.00 1703-311-01 Sub-Saver (JT2020M1) 16 lbs. $429.00 1703-304-01 Sub-Saver (JT2720) 12.1 lbs. $349.00 1703-305-01 Sub-Saver (JT4020) 19.3 lbs. $595.00 Subjected to thousands of torque transfer cycles, thrust pull-back and breakout, the sub-saver is the foundation of the down-hole operation. Precision machined using 4145 heat-treated materials, StraightLineHDD drive chucks and subsavers are designed to keep performing long after others have failed. 2 StraightLineHDD Product Catalog - Volume 8 straightlinehdd.com

DITCH WITCH COMPATIBLE 2-PIECE DRIVE CHUCKS & SUB-SAVERS 1703-315-01 Drive Chuck (JT2720M1 - Small Flange) 18.05 lbs. $595.00 1703-318-01 Drive Chuck (JT2720M1/JT2720AT - Large Flange) 23.5 lbs. $675.00 1703-316-01 Drive Chuck (JT3020M1/JT3020AT) 20.8 lbs. $695.00 1703-319-01 Drive Chuck (JT4020M1 - Small Flange) 18.75 lbs. $695.00 1703-320-01 Drive Chuck (JT4020AT/JT4020M1 - Large Flange) 19 lbs. $795.00 65312 Drive Chuck (JT7020/JT8020/JT100-2 7/8" IF Pin CALL CALL Ditch Witch operators who deploy StraightLineHDD s unique 2-piece drive chuck/sub-savers see an immediate savings in operating costs. It s simple math: when the threads of the sub-saver requires replacement, instead of replacing the entire part, a 2-piece system requires only the sub-saver to be replaced at less than one-third the cost of a 1-piece design. 1703-315-02 Sub-Saver (JT2720M1) 19.7 lbs. $295.00 1703-315-03 Sub-Saver (JT2720AT) 22.3 lbs. $365.00 1703-316-02 Sub-Saver (JT3020M1) 35.1 lbs. $275.00 1703-316-03 Sub-Saver (JT3020AT) 39.9 lbs. $375.00 1703-319-02 Sub-Saver (JT4020M1) 33.8 lbs. $380.00 1703-320-03 Sub-Saver (JT4020M1, with All-Terrain Drive Chuck) 24.85 lbs. $395.00 1703-320-02 Sub-Saver (JT4020AT) 33 lbs. $395.00 CALL Sub-Saver (JT7020/JT8020/JT100) CALL CALL Tip: The sub-saver is subjected to tremendous stress. Protect your bore from costly down-time by inspecting and replacing your sub-saver at the first sign of wear. DON T FORGET THREAD LUBE SEE PAGE 85 straightlinehdd.com Product Catalog - Volume 8 StraightLineHDD 3

TRANSITION RODS DITCH WITCH COMPATIBLE Using StraightLineHDD transition rods give Ditch Witch drill operators a non-torqued connection between the transition rod and the down-hole tool for safe and convenient tool installation. By design, our transition rods length and condensed mid-body diameter reduce stress loads exerted on the drill pipe. 4 StraightLineHDD Product Catalog - Volume 8 straightlinehdd.com

PART# DESCRIPTION WEIGHT PRICE 1704-310-01 JT520 Pin x 1.325" EZ2 Pin (JT520) 8 lbs. $249.00 1704-314-01 JT920 Pin x 1.625" (fine) EZ2 Pin (JT920/JT920L/JT921/JT921S/JT922) 12 lbs. $319.00 1704-319-01 JT1220M1 Pin x 1.875" EZ3 Pin (JT1220M1) 22.8 lbs. $449.00 1704-312-01 JT1720 Pin x 2.00" EZ2 Pin (JT1720) 29 lbs. $449.00 1704-318-01 JT2020M1 Pin x 2.00" EZ2 Pin (JT2020M1) 31 lbs. $399.00 1704-313-01 JT2720 Pin x 2.00" EZ2 Pin (JT2720) 39 lbs. $419.00 1704-333-01 JT2720 Pin x 2.25" EZ3 Pin (JT2720) 37.45 lbs. $695.00 1704-332-01 JT2720M1 Pin x 2.00" EZ2 Pin (JT2720M1/JT3020M1) 35.25 lbs. $439.00 1704-325-01 JT2720M1 Pin x 2.25" EZ2 Pin (JT2720M1/JT3020M1) 35.25 lbs. $459.00 1704-323-01 JT2720M1 Pin x 2.25" EZ3 Pin (JT2720M1/JT3020M1) 37.45 lbs. $469.00 1704-329-01 JT2720M1 Pin x JT4020M1 Pin (JT2720M1/JT3020M1) 69.5 lbs. $499.00 1704-344-01 JT3020AT Pin x 2.00" EZ2 Pin (JT2720AT/JT3020AT) 41 lbs. $649.00 1704-324-01 JT3020AT Pin x 2.25" EZ3 Pin (JT2720AT/JT3020AT) 41 lbs. $569.00 1704-328-01 JT3020AT Pin x JT4020M1 Pin (JT2720AT/JT3020AT) 44.1 lbs. $529.00 1704-321-01 JT4020 Pin x 2.625" EZ2 Pin (JT4020) 55.45 lbs. $649.00 1704-322-01 JT4020M1 Pin x 2.625" EZ2 Pin (JT4020M1) 60.45 lbs. $649.00 1704-327-01 JT4020M1 Pin x JT4020M1 Pin (JT4020M1) 62.3 lbs. $529.00 1704-335-01 JT7020 Pin x JT7020 Pin, 48" Shoulder to Shoulder (JT7020/JT8020/JT100) 71 lbs. $995.00 straightlinehdd.com Product Catalog - Volume 8 StraightLineHDD 5

OCTAGON COLLARS DITCH WITCH COMPATIBLE When the collar is installed over the flats on transition rods, StraightLineHDD hard-faced collars prevent thread overtorquing, while maximizing durability and wear resistance. 1704-315-01 JT520, 1.325" EZ2 1.2 lbs. $56.80 1704-337-01 JT920/JT920L/JT921/JT922, 1.625" EZ2 2.6 lbs. $102.78 (Hard-Faced) 1704-338-01 JT1220M1, 1.875" EZ3 (Hard-Faced) 4.05 lbs. $133.27 1704-339-01 JT1720/JT2020M1/JT2720, 2.00" EZ2 4.95 lbs. $179.58 (Hard-Faced) 1704-340-01 JT2720M1, 2.25" EZ2 (Hard-Faced) 8.35 lbs. $222.49 1704-341-01 JT3020M1, 2.25" EZ3 (Hard-Faced) 9.8 lbs. $245.08 1704-342-01 JT4020/JT4020M1, 2.625" EZ2 (Hard-Faced) 9.9 lbs. $213.46 go online TO ORDER NOW! 6 StraightLineHDD Product Catalog - Volume 8 straightlinehdd.com

straightlinehdd.com Product Catalog - Volume 8 StraightLineHDD 7

TRANSMITTER HOUSINGS DITCH WITCH COMPATIBLE 1201-101-06 2", 3-Bolt Pattern (Complete assembly, including nose piece & 13.26 lbs. $895.00 canoe), Box x DW, SBRP/DS, 3-Bolt Pattern 1201-101-14 2 3/4", 86B, 5-Bolt Pattern, 2.00" IF Box 38 lbs. $849.00 1201-101-15 3", 86B, 5-Bolt Pattern, 2.00" IF Box 41 lbs. $895.00 1201-101-16 3 1/4", 86B, 6-Bolt Pattern, 2.375" REG Box 57 lbs. $1,050.00 1201-101-13 3 7/8", 86B, 6-Bolt Pattern, 2.875" Reg Box 88 lbs. $1,799.00 NOSE PIECE 1201-102-07 Nose Piece, 2 Holes x.063" - 2" JT520 Housing 0.5 lbs. $45.00 HOUSING JETS WATCH NOW SEE HOW IT S MADE! 1201-202-10 Housing Jet, 1/8" hole (fits 2 3/4" - 3 1/4" Housings) 1.1 lbs. $32.99 1201-202-11 Housing Jet, 3/16" hole (fits 2 3/4" - 3 1/4" Housings) 1.1 lbs. $32.99 1201-202-12 Housing Jet, 3/8" hole (fits 3 7/8" - 4 3/4" Housing) 1.1 lbs. $60.00 8 StraightLineHDD Product Catalog - Volume 8 straightlinehdd.com

Consisting of a housing body, jet and optional tail piece, our Ditch Witch compatible housings offer enhanced service life over OEM and other aftermarket housings. Available in 2-, 2 ¾-, 3-, 3 ¼- & 3 7/8-inch OD to match your drill and drilling conditions, all housings are designed to accept Subsite Beacons. StraightlineHDD Ditch Witch compatible transmitter housings are available for all drills from the JT520 to JT100M1. Tip: When selecting a transmitter housing, don t forget that bit selection is a critical choice when planning a bore. StraightLineHDD manufactures a variety of bits that bolt-on perfectly to your Ditch Witch compatible transmitter housing. Each bit is built to last multiple bores and engineered to perform in whatever soil condition you may encounter. See pages 14 17 for more information. straightlinehdd.com Product Catalog - Volume 8 StraightLineHDD 9

HOUSING SAVERS (TAIL PIECES) DITCH WITCH COMPATIBLE All of our high quality housing savers are precision milled from tough 4145 heat-treated alloy for maximum strength and service life. Available in a wide assortment of threads and connection types, our housing savers represent the latest generation of tools designed to lower operational costs, while boosting efficiencies. AD520P520P JT520 Pin x JT520 Pin 2.8 lbs. $129.00 AD520P132EZ2B JT520 Pin x 1.325" EZ2 Box 1.35 lbs. $129.00 AD2720P920P JT2720 Pin x JT920 Pin 6.5 lbs. $179.00 AD2720P1220P JT2720 Pin x JT1220M1 Pin 6.5 lbs. $195.00 AD2720P1720P JT2720 Pin x JT1720 Pin 6.25 lbs. $195.00 AD2720P2720P JT2720 Pin x JT2720 Pin 7.5 lbs. $199.00 10 StraightLineHDD Product Catalog - Volume 8 straightlinehdd.com

AD2720P2720M1P JT2720 Pin x JT2720M1 Pin 15.4 lbs. $349.00 AD2720P162EZ2B JT2720 Pin x 1.625" EZ2 Box 6.5 lbs. $199.00 AD2720P187EZ3B JT2720 Pin x 1.875" EZ3 Box 7.5 lbs. $199.00 AD2720P200EZ2B JT2720 Pin x 2.00" EZ2 Box 4.5 lbs. $199.00 AD2720P225EZ2B JT2720 Pin x 2.25" EZ2 Box 15.05 lbs. $199.00 AD200IFP920P 2.00" IF Pin x JT920 Pin 7 lbs. $195.00 AD200IFP1220P 2.00" IF Pin x JT1220 Pin 7.3 lbs. $195.00 AD200IFP1720P 2.00" IF Pin x JT1720 Pin 8 lbs. $179.00 AD200IFP2720P 2.00" IF Pin x JT2720 Pin 7.29 lbs. $175.00 AD200IFP2720M1P 2.00" IF Pin x JT2720M1 Pin 10.25 lbs. $195.00 AD200IFP162EZ2B 2.00" IF Pin x 1.625" EZ2 Box 8.2 lbs. $195.00 AD200IFP187EZ3B 2.00" IF Pin x 1.875" EZ3 Box 5.5 lbs. $295.00 AD200IFP200EZ2B 2.00" IF Pin x 2.00" EZ2 Box 8 lbs. $205.00 CALL NOW No matter what I need, I can trust the guys at StraightLine to either have it in stock or have the ability to manufacture it quickly. Ted Burns, LBJ Construction, Cushing, Oklahoma straightlinehdd.com Product Catalog - Volume 8 StraightLineHDD 11

HOUSING SAVERS (TAIL PIECES) DITCH WITCH COMPATIBLE AD200IFP225EZ2B 2.00" IF Pin x 2.25" EZ2 Box 9 lbs. $295.00 AD237REGP2720ATP 2.375" REG Pin x JT2720AT Pin 13.25 lbs. $295.00 AD237REGP2720M1P 2.375" REG Pin x JT2720M1 Pin 12 lbs. $295.00 AD237REGP4020P 2.375" REG Pin x JT4020 Pin 12.50 lbs. $295.00 AD237REGP4020M1P 2.375" REG Pin x JT4020M1 Pin 13.8 lbs. $295.00 AD4020M1B237REGP JT4020M1 Box x 2.375" REG Pin 15.5 lbs. $295.00 AD4020ATP237REGP JT4020AT Pin x 2.375" REG Pin 18.6 lbs. $295.00 AD237REGP200EZ2B 2.375" REG Pin x 2.00" EZ2 Box 9 lbs. $205.00 AD237REGP225EZ2B 2.375" REG Pin x 2.25" EZ2 Box 9.25 lbs. $295.00 Tip: Down-time costs you money. That s why you need a partner that s responsive. With the industry s broadest line of Ditch Witch part numbers with most on the shelf and ready to ship StraightLineHDD is the go-to choice when you need parts fast. 12 StraightLineHDD Product Catalog - Volume 8 straightlinehdd.com

AD237REGP225EZ3B 2.375" REG Pin x 2.25" EZ3 Box 13.8 lbs. $295.00 AD237REGP263EZ2B 2.375" REG Pin x 2.625" EZ2 Box 14.65 lbs. $295.00 AD4020P3020ATP JT4020 Pin x JT3020AT Pin 13 lbs. $400.00 AD4020P4020P JT4020 Pin x JT4020 Pin 14 lbs. $295.00 AD4020P225EZ2B JT4020 Pin x 2.25" EZ2 Box 23 lbs. $349.00 AD4020P225EZ3B JT4020 Pin x 2.25" EZ3 Box 13.45 lbs. $295.00 AD4020P263EZ2B JT4020 Pin x 2.625" EZ2 Box 16 lbs. $395.00 AD7020P7020P JT7020 Pin x JT7020 Pin 22 lbs. $395.00 DON T FORGET THREAD LUBE SEE PAGE 85 straightlinehdd.com Product Catalog - Volume 8 StraightLineHDD 13

BITS DITCH WITCH COMPATIBLE Every StraightLineHDD bit is designed to deliver outstanding service life and excellent penetration over multiple bores. Available in many styles and sizes, our bits bolt directly on all Ditch Witch compatible transmitter housings. All of our Ditch Witch Compatible bits feature: Carbide hard-facing protects the entire bit perimeter. 4140 heat-treated steel plate insures long service life. Low-cost/long-life delivers an extremely favorable cost per-foot operation. bit selection guide SOILS SANDY SOFT SOILS MEDIUM HARD SOFT ROCK MEDIUM ROCK HARD ROCK Tip: As a rule of thumb, larger bits perform better in softer soils (sands, loams, sticky clays), while smaller bits perform better in hard soils (i.e. hardpan, shales, caliche, etc). HARD FACE FANG CHEVRON SABRE RAPTOR THRASHER Legend - Best Good Fair Less Recommended Not Recommended 14 StraightLineHDD Product Catalog - Volume 8 straightlinehdd.com

HARD-FACED BITS Hard-Faced bits feature generous carbide hard-facing that s extremely resistant to abrasive conditions. Hard-Faced bits perform well in: alluvial, clay, sands, small aggregates and gravel. FANG BITS The steep tapered Fang bit delivers excellent penetration in tough formations. The bit s reduced surface area dramatically enhances steering performance. Fang bits perform well in: sand and sandy loams. HARD-FACED, 5-BOLT 1301-134-02 Hard-Faced, 3 1/2" 6.45 lbs. $111.00 1301-134-03 Hard-Faced, 4" 7.32 lbs. $124.00 1301-134-04 Hard-Faced, 4 1/2" 8.61 lbs. $136.00 HARD-FACED, 6-BOLT 1301-146-01 Hard-Faced, 5" 10.42 lbs. $149.00 FANG, 5-BOLT 1301-136-01 Fang, 3" 4.5 lbs. $129.00 1301-136-03 Fang, 4" 7.35 lbs. $149.00 FANG, 6-BOLT 1301-142-03 Fang, 6" 18.5 lbs. $199.00 straightlinehdd.com Product Catalog - Volume 8 StraightLineHDD 15

BITS DITCH WITCH COMPATIBLE CHEVRON BITS The Chevron features a split-face design, coupled with angular tungsten-carbide cutting surfaces. The result is a bit with excellent steering response even in tough soil conditions. Chevron bits perform well in: sand, sandy loams and shale. SABRE BITS The Sabre was developed as a result of customer requests for a bit with aggressive carbide cutting edges located to insure maximum cutting within the body of the bit. The result is a bit that engages hard pan soil, while maximizing steering in cobble. Sabre bits perform well in: hard pan or cobble. CHEVRON, 5-BOLT 1301-137-01 Chevron, 3 1/2" 6.45 lbs. $195.00 1301-137-03 Chevron, 4 1/2" 8.45 lbs. $217.00 SABRE, 5-BOLT 1301-439-04 Sabre, 4" 8 lbs. $329.00 CHEVRON, 6-BOLT 1301-143-01 Chevron, 5" 13.45 lbs. $229.00 1301-143-03 Chevron, 6" 16.15 lbs. $249.00 SABRE, 6-BOLT 1301-439-05 Sabre, 5" 15.6 lbs. $399.00 1301-439-06 Sabre, 6" 20.3 lbs. $419.00 16 StraightLineHDD Product Catalog - Volume 8 straightlinehdd.com

RAPTOR BITS The Raptor is an aggressive design featuring carbide buttons lining the entire perimeter. The bit s angled face eliminates the tendency to snag in rock outcroppings and improves cutting action in tough conditions. Raptor bits perform well in: tough aggregate conditions. RAPTOR, 5-BOLT 1301-138-02 Raptor, 3 1/2" 6.9 lbs. $229.00 1301-138-03 Raptor, 4" 7.9 lbs. $249.00 1301-138-04 Raptor, 4 1/2" 8.95 lbs. $259.00 RAPTOR, 6-BOLT 1301-151-01 Raptor, 5" 15.35 lbs. $269.00 1301-151-03 Raptor, 6" 18.45 lbs. $319.00 THRASHER BITS An aggressive design, the Thrasher features a series of aggressive conical tungsten carbide cutters. The result is an aggressive, long-lasting bit that delivers good results in tough conditions. Thrasher bits perform well in: hardpan, shale, caliche and sandstone formations. THRASHER, 5-BOLT 1301-133-00 Thrasher, 3" 6.47 lbs. $159.00 1301-133-01 Thrasher, 3 1/2" 7.62 lbs. $169.00 1301-133-02 Thrasher, 4" 8.26 lbs. $179.00 THRASHER, 6-BOLT 1301-145-01 Thrasher, 5" 12.55 lbs. $209.00 1301-145-03 Thrasher, 6" 16.01 lbs. $249.00 straightlinehdd.com Product Catalog - Volume 8 StraightLineHDD 17

SLIDE WRENCHES DITCH WITCH COMPATIBLE Stop paying too much for your slide wrenches. Built to the same exacting standards as all StraightLineHDD tools, our Ditch Witch compatible slide wrenches do the job at a fraction of the cost. 6201-101-01 Wrench (JT520) 11.68 lbs. $419.00 6201-102-01 Wrench (JT920/JT920L) 14.2 lbs. $429.00 6201-103-01 Wrench, Round Sensor, Horizontal (JT1720) 18.2 lbs. $519.00 6201-103-02 Wrench, Square Sensor (JT1720) 18.2 lbs. $519.00 6201-103-03 Wrench, Round Sensor, Vertical (JT1720) 18.2 lbs. $519.00 6201-104-01 Wrench (JT1720/JT2321) 17.5 lbs. $519.00 6201-105-01 Wrench (JT2720) 39.8 lbs. $589.00 6201-106-01 Wrench (JT4020) 105 lbs. $1,199.00 18 StraightLineHDD Product Catalog - Volume 8 straightlinehdd.com

DITCH WITCH COMPATIBLE PIPE RACKS Looking to add a spare pipe rack or replace altogether? StraightLineHDD manufactures a complete line of durable Ditch Witch pipe racks. 1901-101-01 Holds 40 pieces (JT920L) 195 lbs. $1,495.00 1901-101-02 Holds 40 pieces (JT1720) 350 lbs. $1,495.00 1901-101-03 Holds 52 pieces (JT2720) 535 lbs. $1,895.00 1901-102-17 Holds 50 pieces (JT3020M1) 980 lbs. $3,495.00 1901-101-04 Holds 16 pieces (JT4020) 675 lbs. $2,595.00 1901-102-18 Holds 32 pieces (JT4020M1) 943 lbs. $4,495.00 1901-101-05 Holds 9 pieces (JT4020AT) 918 lbs. $3,595.00 1901-101-06 Holds 12 pieces (JT7020/JT8020/JT100) 850 lbs. $3,395.00 straightlinehdd.com Product Catalog - Volume 8 StraightLineHDD 19

REPLACEMENT TRACKS DITCH WITCH COMPATIBLE If it s time to replace the worn tracks on your Ditch Witch rig, look to StraightLineHDD. Our complete line of Ditch Witch compatible replacement tracks are 20 percent heavier than the competition and feature a heavy-duty, one-piece internal steel cable that s stretch and tear resistant. 6203-101-01 Rubber Tracks (JT520) 64 lbs. $375.00 6203-102-01 Rubber Tracks (JT820/JT920/JT920L/JT3510) 164 lbs. $575.00 6203-103-01 Rubber Tracks (JT1720/JT2020M1) 189 lbs. $725.00 6203-104-01 Rubber Tracks (JT2720) 336 lbs. $1,495.00 6203-104-02 Rubber Tracks (JT2720M1/JT2720AT/JT3020M1/ 341 lbs. $1,495.00 JT3020AT) 6203-105-01 Rubber Tracks (JT4020) 747 lbs. $2,595.00 6203-106-01 Rubber Tracks (JT7020/JT8020/JT100) 955 lbs. $3,725.00 20 StraightLineHDD Product Catalog - Volume 8 straightlinehdd.com

DITCH WITCH COMPATIBLE CONVERSION SOLUTIONS DITCH WITCH TO VERMEER SUB SAVERS 1703-322-06 Sub Saver, Crossover (JT2720M1/JT2720AT w/2.375" FS1 Box) 23.8 lbs. $459.00 1703-315-04 Sub Saver, Crossover (JT2720M1/JT2720AT x 2.375" FS1 Pin) 24.2 lbs. $365.00 1703-322-04 Sub Saver (JT3020M1/JT3020AT w/2.375" FS1 Box) 35 lbs. $365.00 1703-325-02 Sub Saver (JT3020M1/JT3020AT w/2.375" FS1 Pin) 35 lbs. $365.00 1703-312-02 Sub Saver (JT4020M1/JT4020AT w/2.875" FS1 Pin) 8 lbs. $699.00 1703-320-04 Sub Saver (JT4020M1/JT4020AT w/3.50" FS1 Pin) 35 lbs. $695.00 Requires the 2-piece Ditch Witch compatible Drive Chuck (page 3). DON T FORGET WRENCH KIT SEE PAGE 84 Convert your Ditch Witch rig to run 1-piece forged drill pipe. StraightLineHDD conversion solutions will extend the life of your drill pipe and lower your operating costs. 1703-322-01 Sub Saver (JT922 w/1.66" FS1 Box) 9.2 lbs. $299.00 1703-322-05 Sub Saver (JT1220 w/1.90" FS1 Box) 11.8 lbs. $419.00 1703-322-02 Sub Saver (JT1220 w/2.06" FS1 Box) 10.8 lbs. $419.00 1703-322-07 Sub Saver (JT1220 w/2.06" FS1 Pin) 10.8 lbs. $419.00 1703-303-02 Sub Saver (JT1720 w/2.06" FS1 Box) 8 lbs. $395.00 1703-322-03 Sub Saver (JT2020 w/2.375" FS1 Box) 15.8 lbs. $419.00 straightlinehdd.com Product Catalog - Volume 8 StraightLineHDD 21

CONVERSION SOLUTIONS DITCH WITCH TO VERMEER DRIVE CHUCKS DITCH WITCH COMPATIBLE Convert your Ditch Witch rig to run 1-piece forged drill pipe. StraightLineHDD conversion solutions will extend the life of your drill pipe and lower your operating costs. 1703-326-01 Drive Chuck, Crossover (JT920 w/1.66" FS1 Pin) * 12.5 lbs. $295.00 1703-323-01 Drive Chuck, Crossover (JT922 w/1.66" FS1 Pin) * 13 lbs. $295.00 1703-311-02 Drive Chuck, Crossover (JT2020M1 w/2.375" FS1 Pin) ** 17 lbs. $449.00 go online TO ORDER NOW! * Requires the Vermeer compatible Sub Saver (1703-601-02, page 30). ** Requires the Vermeer compatible Sub Saver (1703-604-03, page 31). 22 StraightLineHDD Product Catalog - Volume 8 straightlinehdd.com

DITCH WITCH COMPATIBLE CONVERSION SOLUTIONS DITCH WITCH TO VERMEER STARTER RODS Add flexibility to your rig with Ditch Witch compatible starter rods. StraightLineHDD starter rods provide a safe and convenient non-torqued crossover connection from Ditch Witch drill pipe to Vermeer down-hole tools and DCI transmitters. Starter rods are available for: JT520, JT920, JT920L, JT1720, JT2020M1, JT2720/M1 & JT4020. GREAT VALUE 1704-305-01 JT520 Pin x Vermeer 1.625" LP QC Box (JT520) 11.9 lbs. $249.00 1704-301-01 JT920 Pin x Vermeer 1.625" LP QC Box (JT920/JT920L) 12 lbs. $249.00 1704-345-01 JT1220 Pin x Vermeer 2.125" LP QC Box (JT1220) 22 lbs. $295.00 1704-302-01 JT1720 Pin x Vermeer 2.125" LP QC Box (JT1720) 21.45 lbs. $279.00 1704-309-01 JT2020M1 Pin x Vermeer 2.125" LP QC Box (JT2020M1) 23 lbs. $309.00 1704-303-01 JT2720 Pin x Vermeer 2.125" LP QC Box (JT2720) 23 lbs. $309.00 1704-307-01 JT2720M1 Pin x Vermeer 2.125" LP QC Box (JT2720M1/JT3020M1) 29.2 lbs. $395.00 1704-308-01 JT4020 Pin x Vermeer 2.125" LP QC Box (JT4020) 22.85 lbs. $399.00 JT2720 Pin x Vermeer 2.125" Quick Connect (JT2720) straightlinehdd.com Product Catalog - Volume 8 StraightLineHDD 23

CONVERSION SOLUTIONS VERMEER TO DITCH WITCH CROSSOVER RODS DITCH WITCH COMPATIBLE StraightLineHDD crossover rods give Ditch Witch drill operators a non-torqued, Vermeer to Ditch Witch crossover connection. 1704-805-01 Crossover Rod, 1.66" FS1 Box x 1.325" EZ2 Pin 18 lbs. $495.00 1704-330-03 Crossover Rod, 1.66" FS1 Pin x 1.625" EZ2 Pin 14.75 lbs. $449.00 1704-334-01 Crossover Rod, 1.90" FS1 Box x 1.875" EZ3 Pin 29 lbs. $549.00 1704-330-02 Crossover Rod, 1.90" FS1 Pin x 1.875" EZ3 Pin 32 lbs. $449.00 1704-330-06 Crossover Rod, 1.90" FS1 Pin x 2.00" EZ2 Pin 26 lbs. $549.00 1704-330-07 Crossover Rod, 2.06" FS1 Pin x 2.00" EZ2 Pin 28 lbs. $549.00 1704-330-01 Crossover Rod, 2.375" FS1 Pin x 2.00" EZ2 Pin 35.55 lbs. $499.00 1704-330-04 Crossover Rod, 2.375" FS1 Pin x 2.25" EZ2 Pin 39 lbs. $595.00 1704-330-05 Crossover Rod, 2.375" FS1 Pin x 2.25" EZ3 Pin 43 lbs. $650.00 1704-616-01 Crossover Rod, 2.375" FS1 Pin x 2.125" LP QC Box 32 lbs. $599.00 24 StraightLineHDD Product Catalog - Volume 8 straightlinehdd.com

DITCH WITCH COMPATIBLE DRILL PIPE 1103-001 Drill Pipe, Welded, 1.125" x 5' (JT520) 15 lbs. CALL 1103-003 Drill Pipe, Inertia Welded, 1.625" x 6.6' (JT920/JT921S) 27 lbs. CALL 1103-017 Drill pipe, Inertia Welded, 1.625" x 6' (JT922) 27 lbs. CALL 1103-004 Drill Pipe, Inertia Welded, 1.625" x 9.8' (JT920L/JT921) 40 lbs. CALL 1103-016 Drill Pipe, Inertia Welded, 1.90" x 9.8' (JT1220M1) 56 lbs. CALL 1103-005 Drill Pipe, Inertia Welded, 2.06" x 9.8' (JT1720/JT1720M1) 60 lbs. CALL 1103-013 Drill Pipe, Inertia Welded, 2.06" x 9.8' (JT2020M1) 59 lbs. CALL 1103-006 Drill Pipe, Inertia Welded, 2.375" x 9.8' (JT2720) 80 lbs. CALL 1103-011 Drill Pipe, Inertia Welded, 2.375" x 9.8' (JT2720M1/JT3020M1) 85 lbs. CALL 1103-007 Drill Pipe, Inertia Welded, 2.875" x 14.8' (JT4020) 232 lbs. CALL 1103-015 Drill Pipe, Inertia Welded, 2.875" x 14.8' (JT4020M1) 185 lbs. CALL 1103-010 Drill Pipe, Inertia Welded, 3.50" x 14.8' (JT7020M1/JT8020M1) 240 lbs. CALL ONE-PIECE FORGED PIPE IS AVAILABLE, CALL 800.654.3484 I use StraightLine because their people are the most knowledgeable in the industry. I call them direct and it s a very short conversation and I have my product. Ben Bosnell, Bosnell Excavation, Lusk, Wyoming straightlinehdd.com Product Catalog - Volume 8 StraightLineHDD 25

DRILL PIPE - HUNTING StraightLineHDD is your source for the HIWS1 drill stem and patented HIWS2 connection technology Vermeer drill pipe. Our drill pipe feature: Durable 4140/4145 heat-treated materials, with Brinell hardness range of 33-38 Rc and a 125KSI minimum yield. Backed by rigorous 100 percent dimensional inspection and documentation process. DON T FORGET WRENCH KIT SEE PAGE 84 VERMEER COMPATIBLE FIRESTICK 1 1101-020 Forged, 1.315" HIWS1 x 6', D6x6 Compatible 18 lbs. CALL 1101-001 Forged, 1.66" HIWS1 x 6', D7x11/D9x13 Compatible 26 lbs. CALL 1101-002 Forged, 1.66" HIWS1 x 10', D10x14/10x15 Compatible 38 lbs. CALL 1101-003 Forged, 1.90" HIWS1 x 10', D16x20 Compatible 55 lbs. CALL 1101-004 Forged, 2.06" HIWS1 x 10', D20x22/D24x26 Compatible 62 lbs. CALL 1101-005 Forged, 2.375" HIWS1 x 10', D24x40 Compatible 73 lbs. CALL 1101-006 Forged, 2.375" HIWS1 x15', D40x40 Compatible 112 lbs. CALL 1101-027 Forged, 2.375" HIWS1 650 x 10', D33x44/D36x50 Compatible 81 lbs. CALL 1101-029 Forged, 2.625" HIWS1 650 x 15', D33x44/D36x50 Compatible 115 lbs CALL 1105-019 Forged, 2.375" HIWS1 700 x 10', D33x44/D36x50 Compatible 117 lbs. CALL 1101-023 Forged, 2.625" HIWS1 700 x 15', D33x44/D36x50 Compatible 115 lbs. CALL 1101-007 Forged, 2.875" HIWS1 x 15', D50x100/D60x90 Compatible 180 lbs. CALL 1101-008 Forged, 3.50" HIWS1 x 15', D50x100/D80x100 Compatible 250 lbs. CALL 1101-024 Forged, 3.50" HIWS1 1000 x 20', D100x120/D100x140 Compatible 351 lbs. CALL 26 StraightLineHDD Product Catalog - Volume 8 straightlinehdd.com

FIRESTICK 2 1101-017 Forged, 2.063" HIWS2 x 10', D24x33 Compatible 63 lbs. CALL 1101-012 Forged, 2.375" HIWS2 x 10', D33x44/D36x50 Compatible 81 lbs. CALL 1101-010 Forged, 2.375" HIWS2 x 15', D33x44/D36x50 Compatible 115 lbs. CALL 1101-014 Forged, 2.625" HIWS2 x 15', D36x50 Compatible 160 lbs. CALL 1101-013 Forged, 2.875" HIWS2 x 15', D55x100 Compatible 198 lbs. CALL 1101-016 Forged, 3.50" HIWS2 x 20', D100x120/D100x140 Compatible 327 lbs. CALL 800.654.3484 straightlinehdd.com Product Catalog - Volume 8 StraightLineHDD 27

DRIVE CHUCKS VERMEER COMPATIBLE 1703-601-01 Drive Chuck (fits D7x11, 1.66" FS1) 5.58 lbs. $199.00 1703-602-01 Drive Chuck (fits D10x15, 1.66" FS1) 6.55 lbs. $199.00 1703-614-01 Drive Chuck (fits D10x14, 1.66" FS1) 7.25 lbs. $229.00 1703-603-01 Drive Chuck (fits D16x20, 1.90" FS1) 7.9 lbs. $249.00 1703-609-01 Drive Chuck (fits D18x22, 1.90" FS1) 9.9 lbs. $249.00 1703-610-01 Drive Chuck (fits D20x22, 2.06" FS1) 7.21 lbs. $299.00 1703-618-01 Drive Chuck (fits D24x33, 2.06" FS2) 12 lbs CALL 1703-608-01 Drive Chuck (fits D24x26, 2.06" FS1) 16.3 lbs. $289.00 1703-604-01 Drive Chuck (fits D24x40/D40x40, 2.375" FS1) 15.33 lbs $349.00 1703-611-01 Drive Chuck (fits D24x40 Series II, 2.375" FS1) 14.45 CALL 1703-615-01 Drive Chuck (fits D33x44/D36x50, FS650) 14.5 lbs. CALL StraightLineHDD drive chucks are precision machined using 4145 heattreated for Vermeer drills. Available in Firestick 1, 2 and 650/700/1000 connections for Vermeer drills from D6x6 through D100x140. 1703-619-01 Drive Chuck (fits D33x44/D36x50, 2.375" FS2) 14.5 lbs. $409.00 1703-616-01 Drive Chuck (fits D33x44/D36x50, 2.625" FS700) 15 lbs. $1,299.00 1703-606-01 Drive Chuck (fits D50x100, 2.875" FS1) 34.73 lbs. $689.00 1703-607-01 Drive Chuck (fits D50x100/D80x100, 3.5" FS1) 35.4 lbs. $689.00 1703-621-01 Drive Chuck (fits D100x120, 3.50" FS2) 45 lbs. CALL 1703-617-01 Drive Chuck (fits D100x120/D100x140, 3.50" FS1000 pipe) 50 lbs. CALL 28 StraightLineHDD Product Catalog - Volume 8 straightlinehdd.com

straightlinehdd.com Product Catalog - Volume 8 StraightLineHDD 29

1-PIECE SUB-SAVERS VERMEER COMPATIBLE Precision machined from 4145 heat-treated material, our sub-savers are incredibly durable. Available in Firestick 1, 2 and 650/700/1000 connections for Vermeer drills from D6x6 through D100x140. 1703-613-02 Sub-Saver (fits D6x6, 1.66" FS1) 6.0 lbs. $99.00 1703-601-02 Sub-Saver (fits D7x11/D7x11a/D10x15, 1.66" FS1) 3.88 lbs. $69.00 1703-601-03 Sub-Saver (fits D7x11 Series II/D9x13 Series II, 1.66" FS1) 5.77 lbs. $89.00 1703-614-02 Sub-Saver (fits D10x14, 1.66" FS1) 3.0 lbs. $89.00 1703-603-02 Sub-Saver (fits D16x20/D16x20a, 1.90" FS1) 4.69 lbs. $79.00 1703-603-03 Sub-Saver (fits D16x20 Series II, 1.90" FS1) 10.10 lbs. $169.00 800.654.3484 1703-609-02 Sub-Saver (fits D18x22, 1.90" FS1) 3.34 lbs. $99.00 1703-610-02 Sub-Saver (fits D20x22/D24X26, 2.06" FS1) 6.38 lbs. $99.00 1703-610-03 Sub-Saver (fits D20x22 Series II, 2.06" FS1) 12.23 lbs. $149.00 1703-618-02 Sub-Saver (fits D24x33, 2.06" FS2) 6.0 lbs. CALL 1703-608-02 Sub-Saver (fits D24x26, 2.06" FS1) 7.71 lbs. $89.00 Tip: The sub-saver is subjected to tremendous stress. Protect your bore from costly down-time by inspecting and replacing your sub-saver at the first sign of wear. 30 StraightLineHDD Product Catalog - Volume 8 straightlinehdd.com

DON T FORGET THREAD LUBE SEE PAGE 85 1703-604-02 Sub-Saver (fits D24x40/D40x40, 2.375" FS1) 7.3 lbs. $109.00 1703-604-03 Sub-Saver (fits D24x40A, 2.375" FS1) 9.39 lbs. $109.00 1703-611-02 Sub-Saver (fits D24x40 Series II, 2.375" FS1) 16 lbs. $149.00 1703-615-02 Sub-Saver (fits D33x44/D36x50, 2.375" FS650) 14 lbs. $239.00 1703-616-02 Sub-Saver (fits D33x44/D36x50, 2.625" FS700 pipe) 9.5 lbs. $239.00 1703-619-02 Sub Saver (fits D33x44/D36x50, 2.625" FS2) 13 lbs. $289.00 1703-606-02 Sub-Saver (fits D50x100/D60x90, 2.875" FS1) 16.67 lbs. $289.00 1703-620-02 Sub Saver (fits D55x100, 2.875" FS2) 19 lbs. $449.00 1703-607-02 Sub-Saver (fits D50x100/D80x100, 3.5" FS1) 19.43 lbs. $289.00 1703-607-03 Sub Saver (fits D80x100, 3.5" FS1) 19.43 lbs. $349.00 1703-621-02 Sub Saver (fits D100x120, 3.5" FS2) 19.10 lbs. $469.00 1703-617-02 Sub-Saver (fits D100x120/D100x140, 3.5" FS1000 pipe) 16 lbs. $329.00 straightlinehdd.com Product Catalog - Volume 8 StraightLineHDD 31

STARTER RODS VERMEER COMPATIBLE With starter rods being subjected to increasing stress, you need the strength and durability of StraightLineHDD starter rods. Precision machined from tough 4145 heat-treated alloy steel, our Vermeer compatible starter rods are available in Firestick 1 & 2 connections for Vermeer drills from D6x6 through D36x50 Series II. 1704-601-01 D7x11/D7x11 Series II/D9x13/D10x15 (1.66" FS1) 12 lbs. $199.00 1704-602-01 D16x20/D18x22 (1.90" FS1) 17.1 lbs. $209.00 1704-608-01 D18x22/D20x22/D24x26 (2.06" FS1) 22 lbs. $219.00 1704-612-01 D24x33 (2.06" FS2) 23 lbs. CALL 1704-603-02 D24x40/D40x40 (2.375" FS1) Standard Length 23.3 lbs. $209.00 1704-603-01 D24x40/D40x40 (2.375" FS1) Deluxe Length 30 lbs. $259.00 1704-614-01 D36x50 (2.375" FS650) 24 lbs. $295.00 1704-615-01 D36x50 (2.625" FS700) 22.45 lbs. $295.00 1704-609-01 D33x44/D36x50 (2.375 FS2) 24 lbs. $479.00 DON T FORGET WRENCH KIT SEE PAGE 84 32 StraightLineHDD Product Catalog - Volume 8 straightlinehdd.com

VERMEER COMPATIBLE HEX COLLARS When installed over the flats on starter rods, StraightLineHDD hard-faced collars prevent thread over-torquing, while maximizing durability and wear resistance. 1704-604-01 Hex Collar, D7x11/D10x15 3.7 lbs. $48.00 1704-605-01 Hex Collar, D7x11/D10x15 (Hard-Faced) 3.45 lbs. $69.00 1704-606-01 Hex Collar, D16x20/D24x40/D33x44/D36x50/D40x40 7.1 lbs. $89.00 1704-607-01 Hex Collar, D16x20/D24x40/D33x44/D36x50/D40x40 (Hard-Faced) 7.5 lbs. $109.00 go online TO ORDER NOW! straightlinehdd.com Product Catalog - Volume 8 StraightLineHDD 33

TRANSMITTER HOUSINGS Consisting of a housing body, jet and optional tail piece, our Vermeer compatible housings offer enhanced service life over OEM and other aftermarket housings. Available in 2 3/4-, 3-, 3 1/4-, 3 5/8- & 4 1/8-inch OD, all StraightLineHDD housings will accept 2-cell DCI transmitters. The 4 1/8-4 3/4 inch housing is designed to accept either the 2- or 4-cell transmitter. Available for all drills, from D6x6 to D100x140. VERMEER COMPATIBLE 1201-201-08 2", DS, JT520 Box x DW, 3-Bolt Pattern, 43 lbs. $895.00 Includes Digitrak Blocks & Nose Piece 1201-201-11 2 3/4", Small Bolt Pattern (2.375" FS1 Box) 32.2 lbs. $639.00 1201-201-10 3", Small Bolt Pattern (2.375" FS1 Box) 43.2 lbs. $729.00 1201-201-09 3 1/4", Small Bolt Pattern (2.375" REG Box) 54 lbs. $999.00 1201-201-12 3 5/8", Large Bolt Pattern (3.5" FS1 Box) 68 lbs. $1,059.00 1201-201-14 4 1/8", Large Bolt Pattern, 2-Cell (2.875" IF) 90.6 lbs. $2,495.00 1201-201-15 4 1/8", Large Bolt Pattern, 4-Cell (2.875" IF) 107.55 lbs. $2,995.00 1201-201-16 4 3/4", Large Bolt Pattern, 2- or 4-Cell (3.5" IF) 128 lbs. $3,495.00 HOUSING JETS 1201-202-10 Housing Jet, 1/8" hole (fits 2 3/4" - 3 1/4" Housings) 1.1 lbs. $32.99 1201-202-11 Housing Jet, 3/16" hole (fits 2 3/4" - 3 1/4" Housings) 1.1 lbs. $32.99 1201-202-12 Housing Jet, 3/8" hole (fits 3 5/8" - 4 3/4" Housing) 1.1 lbs. $60.00 WATCH NOW SEE HOW IT S MADE! 34 StraightLineHDD Product Catalog - Volume 8 straightlinehdd.com

VERMEER COMPATIBLE (TAIL PIECES) HOUSING SAVERS AD237VP166VB 2.375" FS1 Pin x 1.66" FS1 Box 7.75 lbs. $195.00 AD237VP190VB 2.375" FS1 Pin x 1.90"FS1 Box 7.20 lbs. $195.00 AD237VP206VB 2.375" FS1 Pin x 2.06" FS1 Box 8.75 lbs. $195.00 AD237VP162LP 2.375" FS1 Pin x 1.625" LP QC Pin 7 lbs. $150.00 AD237VP212LP 2.375" FS1 Pin x 2.125" LP QC Pin 10 lbs. $150.00 AD237REGP237VB 2.375" REG Pin x 2.375" FS1 Box 12.3 lbs. $295.00 AD237REGP237FS650B 2.375" REG Pin x 2.375" FS650 Box 15 lbs. $295.00 AD237REGP237FS700B 2.375" REG Pin x 2.625" FS700 Box 17 lbs. $295.00 AD237REGP237FS2B 2.375" REG Pin x 2.375" FS2 Box 16 lbs. $495.00 AD237REGP212LP 2.375" REG Pin x 2.125" LP QC Pin 11.3 lbs. $195.00 AD350VP287VB 3.50" FS1 Pin x 2.875" FS1 Box 23 lbs. $295.00 AD350FS1000B350VP 3.50" FS2 x 3.50" FS1 Pin 25 lbs. $495.00 AD350FS2B350VP 3.50" FS1000 x 3.50" FS1 Pin 20.2 lbs. $395.00 AD287IFP350VB 2.875" IF Pin x 3.50" FS1 Box 19.1 lbs. $395.00 AD287IFP350FS1000B 2.875" IF Pin x 3.50" FS1000 Box 25.85 lbs. $395.00 AD287IFP350FS2B 2.875" IF Pin x 3.50" FS2 Box 35 lbs. $495.00 AD350IFP350VB 3.50" IF Pin x 3.50" FS1 Box 25 lbs. $495.00 AD350IFP350FS1000B 3.50" IF Pin x 3.50" FS1000 Box 27 lbs. $495.00 AD350IFP350FS2B 3.50" IF Pin x 3.50" FS2 Box 43 lbs. $595.00 straightlinehdd.com Product Catalog - Volume 8 StraightLineHDD 35

BITS VERMEER COMPATIBLE Every StraightLineHDD bit is designed to deliver outstanding service life and excellent penetration over multiple bores. Available in many styles and sizes, our bits bolt directly on all Vermeer compatible transmitter housings. All of our Vermeer Compatible bits feature: Carbide hard-facing protects the entire bit perimeter. 4140 heat-treated steel plate insures long service life. Low-cost/long-life delivers an extremely favorable cost per-foot operation. bit selection guide SOILS SANDY SOFT SOILS MEDIUM HARD SOFT ROCK MEDIUM ROCK HARD ROCK HARD FACE FANG CHEVRON SABRE RAPTOR THRASHER Legend - Best Good Fair Less Recommended Not Recommended 36 StraightLineHDD Product Catalog - Volume 8 straightlinehdd.com

HARD-FACED BITS Hard-Faced bits feature generous carbide hard-facing that s extremely resistant to abrasive conditions. Hard-Faced bits perform well in: alluvial, clay, sands, small aggregates and gravel. HARD-FACED, SMALL BOLT PATTERN 1301-423-02 Hard-Faced, 3 1/2" 6.44 lbs. $109.00 1301-423-03 Hard-Faced, 4" 7.44 lbs. $119.00 1301-423-04 Hard-Faced, 4 1/2" 8.5 lbs. $129.00 1301-423-05 Hard-Faced, 5" 9.49 lbs. $139.00 FANG BITS The steep tapered Fang bit delivers excellent penetration in tough formations. The bit s reduced surface area dramatically enhances steering performance. Fang bits perform well in: sand and sandy loams. FANG, SMALL BOLT PATTERN 1301-427-03 Fang, 4" 7.8 lbs. $159.00 1301-427-04 Fang, 4 1/2" 8.9 lbs. $169.00 HARD-FACED, LARGE BOLT PATTERN 1301-434-02 Hard-Faced, 5" 14.8 lbs. $169.00 1301-434-04 Hard-Faced, 6" 17.25 lbs. $189.00 FANG, SMALL BOLT PATTERN 1301-437-01 Fang, 5" 15.2 lbs. $169.00 1301-437-03 Fang, 6" 19.5 lbs. $199.00 straightlinehdd.com Product Catalog - Volume 8 StraightLineHDD 37

BITS CHEVRON BITS The Chevron features a split-face design, coupled with angular tungsten-carbide cutting surfaces. The result is a bit with excellent steering response even in tough soil conditions. Chevron bits perform well in: sand, sandy loams and shale. VERMEER COMPATIBLE SABRE BITS The Sabre was developed as a result of customer requests for a bit with aggressive carbide cutting edges located to insure maximum cutting within the body of the bit. The result is a bit that engages tough pan soil, while maximizing steering in cobble. Sabre bits perform well in: hard pan or cobble. CHEVRON, SMALL BOLT PATTERN 1301-429-01 Chevron, 3 1/2" 6.0 lbs. $189.00 1301-429-02 Chevron, 4 6.95 lbs. $199.00 1301-429-03 Chevron, 4 1/2" 7.9 lbs. $209.00 CHEVRON, LARGE BOLT PATTERN 1301-436-01 Chevron, 5" 14.2 lbs. $219.00 1301-436-03 Chevron, 6" 15.85 lbs. $239.00 SABRE, SMALL BOLT PATTERN 1301-439-01 Sabre, 4" 8 lbs. $349.00 SABRE, LARGE BOLT PATTERN 1301-439-03 Sabre, 5" 11 lbs. $399.00 1301-439-02 Sabre, 6" 19 lbs. $419.00 Tip: As a rule of thumb, larger bits perform better in softer soils (sands, loams, sticky clays), while smaller bits perform better in hard soils (i.e. hardpan, shales, caliche, etc). 38 StraightLineHDD Product Catalog - Volume 8 straightlinehdd.com

RAPTOR BITS The Raptor is an aggressive design featuring carbide buttons lining the entire perimeter. The bit s angled face eliminates the tendency to snag rock outcroppings and improves cutting action in tough conditions. Raptor bits perform well in: tough aggregate conditions. RAPTOR, SMALL BOLT PATTERN 1301-430-02 Raptor, 3 1/2" 8.3 lbs. $229.00 1301-430-03 Raptor, 4 9.55 lbs. $239.00 1301-430-04 Raptor, 4 1/2" 10.9 lbs. $249.00 1301-430-05 Raptor, 5" 12.05 lbs. $309.00 RAPTOR, LARGE BOLT PATTERN 1301-438-01 Raptor, 5" 19.25 lbs. $279.00 1301-438-03 Raptor, 6" 23.25 lbs. $309.00 THRASHER BITS An aggressive design, the Thrasher features a series of aggressive conical tungsten carbide cutters. The result is an aggressive, long lasting bit that delivers good results in tough conditions. Thrasher bits perform well in: hardpan, shale, caliche and sandstone formations. THRASHER, SMALL BOLT PATTERN 1301-425-01 Thrasher, 3 1/2" 7.15 lbs. $189.00 1301-425-02 Thrasher, 4" 8.06 lbs. $199.00 1301-425-03 Thrasher, 4 1/2" 9.1 lbs. $209.00 THRASHER, LARGE BOLT PATTERN 1301-433-01 Thrasher, 5" 15.25 lbs. $229.00 1301-433-03 Thrasher, 6" 19 lbs. $249.00 straightlinehdd.com Product Catalog - Volume 8 StraightLineHDD 39

PIPE RACKS VERMEER COMPATIBLE StraightLineHDD manufactures a complete line of pipe racks for all Vermeer drills. Each rack is engineered to exacting standards and is the perfect solution for anyone looking to add a spare or replace a damaged pipe rack. Tip: We are constantly updating and adding to our list of pipe racks. If you don t see your rig on the table, call us at 800.654.3484. 40 StraightLineHDD Product Catalog - Volume 8 straightlinehdd.com

1901-102-01 Holds 44 pieces (fits D10x15) 325 lbs. $1,495.00 1901-102-02 Holds 40 pieces (fits D16x20) 510 lbs. $1,495.00 1901-102-14 Holds 50 pieces (fits D22x22) 490 lbs. $2,395.00 1901-102-03 Holds 20 pieces (fits D24x40 Half Rack) 320 lbs. $1,195.00 1901-102-09 Holds 50 pieces (D24x40A Full Rack) 660 lbs. $3,695.00 1901-102-15 Holds 50 pieces (fits D24x40 Series II) 515 lbs. $2,995.00 1901-102-10 Holds 60 pieces (fits D33x44,10') 585 lbs. $2,995.00 1901-102-05 Holds 20 pieces (fits D33x44 Half Rack, 15') 510 lbs. $2,295.00 1901-102-04 Holds 40 pieces (fits D33x44, 15') 680 lbs. $2,595.00 1901-102-16 Holds 40 pieces (fits D36x50 Series II, 15') 700 lbs. $3,295.00 1901-102-08 Holds 40 pieces (fits D40x40) 858 lbs. $CALL 1901-102-07 Holds 9 pieces (fits D50x100/D80x100 Half Rack) 535 lbs. $2,295.00 1901-102-06 Holds 21, 2 7/8" or 18, 3 1/2" pieces (fits D50x100/D80x100) 585 lbs. $2,595.00 I ve been buying tools from StraightLine for over 10 years. They re affordable, fast and top quality. David Brooks, Brooks Construction, Burden, Kansas 1901-102-11 Holds 24 pieces (D80x100 Series II) 845 lbs. $3,695.00 1901-102-12 Holds 9 pieces (D100x120 Half Rack) 645 lbs. $3,695.00 1901-102-13 Holds 15 pieces (D100x120 Full Rack) 690 lbs. $4,495.00 straightlinehdd.com Product Catalog - Volume 8 StraightLineHDD 41

SWIVELS STRAIGHTLINEHDD For over 25 years StraightLineHDD swivels have established a proven track record for performance and reliability in the harshest underground environments. At the heart of the design is a highly engineered angular contact bearing system that easily handles extreme thrust and radial loads. The bearings are then stacked to exceed the highest load levels. To prevent soil and drilling fluid intrusion, the sealing system features one shaft seal and two lip seals with steel reinforcing rings. 1501-300-05 Clevis x Clevis, 2 1/4" OD, 5-ton 7.5 lbs. $395.00 1501-300-16 Clevis x Clevis, 3 3/4" OD, 10-ton 28 lbs. $895.00 1501-300-01 Clevis x Clevis, 4 1/2" OD, 15-ton 43 lbs. $995.00 1501-300-06 Clevis x Clevis, 5 1/2" OD, 20-ton 68 lbs. $1,495.00 1501-300-07 Clevis x Clevis, 6" OD, 30-ton 90 lbs. $1,795.00 1501-300-02 Clevis x Clevis, 7 1/2" OD, 45-ton 185 lbs. $2,795.00 1501-300-03 2.875" IF BOX x Clevis, 7 1/2" OD, 45-ton 189 lbs. $2,795.00 1501-300-04 3.50" IF BOX x Clevis, 7 1/2" OD, 45-ton 194 lbs. $2,795.00 1501-300-17 Clevis x Clevis, 10" OD, 60-ton 345 lbs. $6,199.00 1501-300-09 4.50" IF BOX x Clevis, 10" OD, 60-ton 365 lbs. $5,399.00 WATCH NOW SEE HOW IT WORKS! 42 StraightLineHDD Product Catalog - Volume 8 straightlinehdd.com

DON T FORGET REAMERS SEE PAGE 56 The swivels we use from StraightLine have easily put in 10,000 plus feet in very harsh conditions. Pull them out, wash them off, grease them up and they are ready to go again. Jeremy Wills, Nowak Construction, Goddard, Kansas straightlinehdd.com Product Catalog - Volume 8 StraightLineHDD 43

ADAPTERS STRAIGHTLINEHDD ADAPTING FROM TOOL-TO-TOOL MADE SIMPLE. At StraightLineHDD, we have the ability to cut over 50,000 custom adapters. From Pin-to-Box and Box-to-Box, to Pin-to-Pin, there s not a thread on the planet we can t adapt. Most adapters are in stock and ready to ship within 24-hours. And if it s something we don t stock, we ll cut a custom adapter and get you back to work in record time. From DW520 to 6 5/8-inches full hole, StraightLineHDD has an adapter solution to fit your needs. HEAT TREATED ALLOY STEEL CALL NOW PRECISION MACHINED Over 74 thread choices. 44 StraightLineHDD Product Catalog - Volume 8 straightlinehdd.com

STRAIGHTLINEHDD StraightLineHDD Box x Box transmitter housings are precision machined from 4145 heat-treated material for durability and are specifically designed to accommodate a wide range of screw-on bit styles, shown below. BOX x BOX TRANSMITTER HOUSINGS THESE HOUSINGS ALSO FEATURE: Two 3/8-inch fluid ports insure excellent mud flow and transmitter cooling. Ability to accept any transmitter or beacon, 2- or 4-cell, which allows quick and simple bit changes to accommodate varying soil conditions. 24-position mechanical timing mechanism. Available for Digitrak and Subsite. SCREW-ON BITS TYPICALLY USED WITH THIS STYLE OF TRANSMITTER HOUSING 1201-401-01 Side Load, 3 1/4", 2.00" IF BOX x 2.375" REG BOX, 58 lbs. $1,259.00 Accepts DCI Sonde (2 cell) 1201-401-04 Side Load, 3 1/4", 2.00" IF Box x 2.375" REG Box, 58 lbs. $1,259.00 Accepts Subsite Beacon 1201-401-02 Side Load, 3 1/2", 2.375" REG BOX x 2.375" REG BOX, 68 lbs. $1,599.00 Accepts DCI Sonde (2 & 4 cell) 1201-401-03 Side Load, 3 1/2", 2.375" REG Box x 2.375" REG Box, 68.5 lbs. $1,599.00 Accepts Subsite Beacon 1201-401-07 Side Load, 4 1/2", 2.875" IF Box x 2.875" REG Box 117 lbs. $2,299.00 1201-402-05 Clocking Block and Spacer, for Box x Box, DCI Sonde 2 lbs. $225.00 1201-402-06 Clocking Block and Space, for Box x Box, Subsite Beacons 2 lbs. $225.00 1201-402-03 Transmitter Housing Lid, 3 1/4" & 3 1/2" BOX x BOX 6.95 lbs. $150.00 1201-204-02 Transmitter Housing Lid Bolt 0.1 lbs. $7.50 23680 Screw, SHCS with Nylon Pellet 0.1 lbs. $5.00 straightlinehdd.com Product Catalog - Volume 8 StraightLineHDD 45

4TH GENERATION TRANSMITTER HOUSING STRAIGHTLINEHDD The StraightLineHDD 4th generation drill head is precision machined from 4145 heat-treated material and is available in 2.5- and 2.75-inch OD. The heat-treated nose piece is available in a variety of nozzle sizes and is designed 1/8-inch larger than the housing body, which significantly reduces housing wear. Our housings accept 2-cell DCI, Spot-D-Tek and Radiodetection transmitters. THE PATENTED CENTERLINE CUTTING DESIGN OF THE 4TH GENERATION DRILL HEAD DELIVERS THESE BENEFITS: Reduces the torque required to obtain efficient cutting. Efficient cutting improves the performance of all machines, regardless of size. Drills straighter and improves on-grade performance. Unlike a duck bill design, the 4th Generation assembly doesn t lose its steer when drilling out of a steer. Putting it all together, the 4th Generation drill head will travel straighter and drill faster, while placing less stress on the drill and drill pipe. Steering Shoe, Nose Piece and Bit sold separately. 1201-301-01 Transmitter Housing, 2 1/2" 15.4 lbs. $925.00 1201-301-02 Transmitter Housing, 2 3/4" 25.1 lbs. $1,250.00 46 StraightLineHDD Product Catalog - Volume 8 straightlinehdd.com

STRAIGHTLINEHDD NOSE PIECES 236-5807-04 Nose Piece, 2 Holes x.094 (fits 2 1/2" Housing) 0.25 lbs. $60.00 236-5808-04 Nose Piece, 2 Holes x.125 (fits 2 1/2" Housing) 0.25 lbs. $60.00 180126 Nose Piece, 2 Holes x.094, (fits 2 3/4" Housing) 0.35 lbs. $60.00 180227 Nose Piece, 2 Holes x.125, (fits 2 3/4" Housing) 0.35 lbs. $60.00 236-6433-04 Nose Piece, 2 Holes x.125 (fits 3 1/4" Housing) 0.5 lbs. $60.00 236-6434-04 Nose Piece, 2 Holes x.188 (fits 3 1/4" Housing) 0.5 lbs. $60.00 236-5310-04 Nose Piece, 2 Holes x.125 (fits 3 3/4" Housing) 0.5 lbs. $60.00 236-5699-04 Nose Piece, 2 Holes x.188 (fits 3 3/4" Housing) 0.5 lbs. $60.00 straightlinehdd.com Product Catalog - Volume 8 StraightLineHDD 47

STEERING SHOES & BITS STRAIGHTLINEHDD STEERING SHOE The StraightLineHDD 4 th generation housing accomplishes precise steering by the long taper, bolt-on steering shoe. The shoe is engineered to match the bit size and housing diameter, yielding superior grade control. 4140 heat-treated alloy steel construction insures long service life. TUFF BIT The Tuff Bit is constructed from S7 tool steel to provide the maximum service life in the most abrasive conditions. From concrete to sand, the Tuff Bit will stand up to its name. Tuff bits perform well in: tough abrasive conditions. 236-8840-04 Steering Shoe, 3" (fits 2 1/2" housing) 4.7 lbs. $155.00 236-9025-04 Steering Shoe, 3 1/2" (fits 2 1/2" housing) 5.65 lbs. $165.00 361587 Steering Shoe, 3" (fits 2 3/4" housing) 7.4 lbs. $225.00 361314 Steering Shoe, 3 1/2" (fits 2 3/4" housing) 8.5 lbs. $230.00 236-6438-04 Steering Shoe, 3 1/2" (fits 3 1/4" housing) 7.1 lbs. $235.00 236-8508-04 Steering Shoe, 4" (fits 3 1/4" housing) 9.15 lbs. $245.00 236-5251-04 Steering Shoe, 4" (fits 3 3/4" housing) 11.04 lbs. $300.00 362215 Steering Shoe, 4 1/2" (fits 3 3/4" housing) 15.3 lbs. $325.00 260631 Tuff, 3 1/2" 2.85 lbs. $150.00 360611 Tuff, 4" 3.65 lbs. $150.00 262101 Tuff, 4 1/2" 4.80 lbs. $155.00 800.654.3484 48 StraightLineHDD Product Catalog - Volume 8 straightlinehdd.com

BENT BIT The 4 th generation Bent Bit allows for faster steering than its straight counterparts. 4140 heat-treated alloy steel construction insures long service life. Bent bits perform well in: alluvial, clay, sands and gravel conditions. STEPPED CARBIDE BIT The most aggressive bit in the 4 th generation line-up, the design and opposing carbide cutter surfaces reduce torque requirements in tough conditions such as hard pan or caliche. Stepped carbide bits perform well in: hard ground conditions. 360323 Bent, 3 1/2" 4.80 lbs. $150.00 262144 Bent, 4" 3.95 lbs. $160.00 362209 Bent, 4 1/2" 4.80 lbs. $175.00 362214 Bent, 5" 6.6 lbs. $160.00 236-8842-04 Stepped Carbide, 3" 1.95 lbs. $150.00 236-8841-04 Stepped Carbide, 3 1/2" 2.20 lbs. $155.00 236-4738-04 Stepped Carbide, 4" 2.60 lbs. $160.00 236-8507-04 Stepped Carbide, 4 1/2" 2.90 lbs. $165.00 362213 Stepped Carbide, 5" 3.2 lbs. $180.00 straightlinehdd.com Product Catalog - Volume 8 StraightLineHDD 49

ROCKEYE HAMMER SYSTEM STRAIGHTLINEHDD THE MOST VERSATILE ROCK TOOL YOU CAN OWN. The RockEye Hammer System has proven to be the most versatile boring tool in the industry, delivering incredible success in a wide variety of ground conditions. The StraightLine RockEye Hammer System easily negotiates its way through any soil condition, including the hardest rock Mother Nature has to offer. MINIMIZE YOUR ENVIRONMENTAL FOOTPRINT WHILE MAXIMIZING YOUR PROFITABILITY. Unlike many drilling methods that require a significant amount of drilling fluid, the RockEye Hammer System typically uses between 0.5 and 3 gallons of water per minute, resulting in less environmental impact and dramatically cleaner job sites. HOW DOES THE ROCKEYE STEER? The convex side of the bent sub, working in conjunction with the attached bit, creates a precision two-point steering system. To steer the hammer it is rotated between two clock positions, as the assembly advances it reacts off of the front and rear steering points. CAN I STEER IN NON-ROCK CONDITIONS? Yes. The procedure to steer in a compactible soil is exactly the same as steering in rock. CAN I USE A HAMMER ON ANY DRILL RIG? Yes. The RockEye will turn any drill into a rock drill. It is as simple as connecting the air on the high pressure side of the mud pump to provide a path for the air supply to be directed into the drill rig s drilling fluid course. The initial installation of the system takes approximately 30-minutes. CAN MY TRANSMITTER SURVIVE THE POUNDING ACTION? The transmitter/beacon is placed in a sleeve-within-asleeve system. StraightLine has perfected a dampening system that virtually removes all shock from the transmitter. THE COMPLETE ASSEMBLY INCLUDES Housing, Shock Dampening Transmitter Assembly, Portable Breakout Wrench Kit & Drill Pipe Adapter. 50 StraightLineHDD Product Catalog - Volume 8 straightlinehdd.com

The production and control were both better than expected. I was very impressed with the hammer. This bore went off without a hitch. I can not imagine why anybody facing rock conditions wouldn t own a RockEye Hammer System. Dustin Walker, W&W Utility Construction, Peculiar, Missouri straightlinehdd.com Product Catalog - Volume 8 StraightLineHDD 51

ROCKEYE HAMMER SYSTEM STRAIGHTLINEHDD BENT SUB ROCKEYE DOWN-HOLE ASSEMBLY The RockEye down-hole assembly includes the bit, hammer body, bent sub, transmitter housing with shock dampening system and the tail piece. The RockEye s precision steering is accomplished by our two-point steering system. The bent sub and the toe of the bit are the essential pieces in the steering system. The hammer is rotated between two clock positions, the steering takes place by reacting off of the front and rear steering points. The RockEye transmitter housing and bent sub is protected by carbide, this protection insures long service life and allows us to offer the only wear guarantee in the industry. Tip: The RockEye Hammer, depending on size, can be effective paired with compressors that can be rented for under $200 per day. WATCH NOW SEE HOW IT WORKS! 52 StraightLineHDD Product Catalog - Volume 8 straightlinehdd.com

ROCKEYE SUPPORT PACK The RockEye support pack is central to the operation of the hammer system. The support pack provides the required lubrication and fluid to the down-hole hammer. This is accomplished with a positive displacement piston pump. The oil pump is adjustable so the operator can control the amount of lubrication being provided to the hammer. The fluid that is needed for the drilling operation is provided by a 5 GPM on board water pump. This system is controlled with a wireless remote or can also be controlled from the console of the support pack. ROCKEYE 250-GALLON TANK Due to the minimal amount of drilling fluids that are needed in hammer operations, the 250-gallon tank is the optimum size. This tank allows for small batches of foam or polymers to be mixed for a full day s worth of drilling. straightlinehdd.com Product Catalog - Volume 8 StraightLineHDD 53

ROCKEYE HAMMER SYSTEM STRAIGHTLINEHDD WITH FOUR MODELS, THERE S A ROCKEYE HAMMER THAT FITS YOUR NEEDS IT S VERSATILE. With four models ranging from 3- to 6-inches, the RockEye turns any rig even those with as little as 10,000 pounds of thrust into a rock hammering machine. The RockEye completely changed the way we do directional boring. It has proven to be a real money saving tool for us. Bob Gump, CBC Pipeline, Inc., Goldonna, Louisiana DESCRIPTION AH3.0 AH4.0 AH5.0 AH6.0 Hammer Body Diameter 3.1" 3.625" 4.6" 5.5" Piston Weight 11.7 lbs. 20 lbs. 30 lbs. 43 lbs. Standard Bit 4.25" 4.75" 5.75" 7" Optional Bit n/a 5.125" 6" 7.5" Minimum Recommended 375-cfm/150-psi 400-cfm/200-psi 700-cfm/300-psi 900-cfm/350-psi Compressor Supply Maximum Recommended 2.75" 3.25" 4.125" 5.75" Tool Joint Diameter Typical Drill Rig Thrust/Pull 10,000-30,000 lbs. 10,000-33,000 lbs. 24,000-80,000 lbs. 50,000-120,000 lbs. 54 StraightLineHDD Product Catalog - Volume 8 straightlinehdd.com

HERE'S WHAT YOU HAD TO SAY ABOUT THE ROCKEYE HAMMER SYSTEM Our contracts don t typically pay higher rates for extreme rock bores, so efficiency is a huge factor. We ve only found one solution that makes sense in our rock bores: the RockEye hammer. Ryan Sullivan, Lineal Contracting - Bedford, Indiana The RockEye Hammer System annihilated rock up here. It s one of my better purchases in a long time. It really exceeded my expectations. Glen Everson, Target Directional Drilling - Lee s Summit, Missouri The StraightLine hammer hits extremely hard, exhibits unbelievable wear resistance and steers perfectly in any condition. Robert Mendoza, RPM Construction - Hobbs, New Mexico straightlinehdd.com Product Catalog - Volume 8 StraightLineHDD 55

REAMERS PROFITABLE SOLUTIONS IN ALL GROUND CONDITIONS It s simple: successful HDD operators know reamer selection is often the difference between making or losing money. That s where StraightLineHDD offers a clear advantage. We were an early pioneer in HDD technology. Over the last 30 years we ve learned a thing or two about what works. Every lesson we ve learned over the years is incorporated into each of our four reamer designs: OPEN-BODY DESIGN: For non-compactible conditions including sands and gravels up to medium rock formations. CLOSED-BODY DESIGN: For compactible conditions including light aggregates. FLUTED-BODY DESIGN: For compactible conditions including heavy aggregates and intermittent solid conditions. HOLE-OPENER DESIGN: For solid formations from sandstone and coral to quartz and granite. STRAIGHTLINEHDD THE RIGHT REAMER AVAILABLE FOR EVERY DRILL StraightLineHDD reamers are available in diameters from 4- to 96-inches, on eight shaft sizes, ranging from 2- to 9 5/8-inches. Choose from 74 common HDD thread types, with new connections added as needed. ALL OF OUR REAMERS SHARE THE FOLLOWING FEATURES: Unique geometries which, by design, result in the lowest possible resistance and smooth cutting action. Precision placement of carbide teeth maximizes cutting performance and extends cutter life. Extensive use of replaceable fluid ports, constructed from hardened steel or carbide (depending on reamer style and shaft size), lowers torque by delivering superior fluid placement to the tool s perimeter. Extensive use of carbide-impregnated hard-surfacing on all exposed edges provide superior wear characteristics. 56 StraightLineHDD Product Catalog - Volume 8 straightlinehdd.com

STRAIGHTLINEHDD CUSTOM REAMERS: LEVERAGE OUR EXPERIENCE TO ENHANCE YOUR PROFITS If you face a unique challenge, StraightLineHDD maintains an experienced team of reamer design and fabrication experts, capable of responding to requests for custom reamer and hole-opener designs. Whatever the drill type or size, whatever the soil condition, the StraightLineHDD team can deliver a custom reamer solution to your job site delivery in as little as two days. WATCH NOW SEE HOW ITS MADE! straightlinehdd.com Product Catalog - Volume 8 StraightLineHDD 57

WHAT YOU NEED, WHEN YOU NEED IT, ON ANY DEVICE Responsive functionality delivers the same web experience across multiple devices including, tablets, mobile phones or desktop. Enhanced check-out streamlines purchases. Improved search simplifies navigation. RESEARCH & SPECIFY ALL YOUR TOOLING QUICKLY ON THE NEW STRAIGHTLINEHDD WEBSITE NOW, OPTIMIZED FOR ALL DEVICES. STRAIGHTLINEHDD.COM 58 StraightLineHDD Product Catalog - Volume 8 straightlinehdd.com

RHINO REAMER - Valued for its ability to cut, mix and pack in one easy pass. GROUND CONDITIONS: Loam, clay, hardpan and small aggregates. SHAFT SIZE: 2" - 4 ¼" SIZE RANGE: 6" - 20" PACKING BELL The unique geometry of the packing bell efficiently packs cuttings and facilitates utility installation. REPLACEABLE FLUID PORTS Located on the taper portion of the body ensures efficient fluid mixing. OPTIONAL BUILT-IN SWIVEL The optional built-in swivel reduces the tool s overall length and keeps the tool in place when pushing backwards. CARBIDE CUTTERS Located on the tapered portion of the body, three rows of aggressive cutters deliver excellent cutting action and long tool life. straightlinehdd.com Product Catalog - Volume 8 StraightLineHDD 59

REAMERS STRAIGHTLINEHDD WINGED REAMER - An open-bodied, double-slope design delivers high productivity with less stress. GROUND CONDITIONS: Non-compactible conditions including sand, aggregates, shale and limestone. SHAFT SIZE: 3" - 9 5/8" SIZE RANGE: 10" - 48" OPEN-BODY DESIGN Open-bodied design cuts and mixes efficiently with low-mass/low-torque for less wear on drill and drill rod. DOUBLE SLOPE WING DESIGN The double-slope wing design yields superior mixing and exceptional durability. REPLACEABLE FLUID PORTS Located on the low pressure side of each wing, replaceable fluid ports presoak the oncoming cutter, which enhances fluid mixing. HARD SURFACED WINGS Available in 3-, 4-5- or 6-wing variations, each wing features extensive use of carbide hard-surfacing to extend tool life. CARBIDE CUTTERS Aggressive carbide cutters, located along the leading edge of the wing, deliver aggressive cutting and extended tool life. 60 StraightLineHDD Product Catalog - Volume 8 straightlinehdd.com

RADIAL FLOW REAMER - A compact, low-torque design that s an effective choice for all sizes of rigs. GROUND CONDITIONS: Sand, loam, light aggregates and sandstone. SHAFT SIZE: 2" - 4 ¼" SIZE RANGE: 6" - 12" REDUNDANT CUTTERS Placement of redundant cutters on wing edges dramatically reduces outer edge wear resistance. CARBIDE CUTTERS Carbide cutters, placed on independent paths, engage the entire bore face. DON T FORGET WRENCH KIT SEE PAGE 84 COMPACT DESIGN Compact design makes it easy to install and remove in confined spaces. straightlinehdd.com Product Catalog - Volume 8 StraightLineHDD 61

REAMERS STRAIGHTLINEHDD FLY-CUTTER REAMER - A low-mass/low-torque solution with aggressive cutter design. GROUND CONDITIONS: Loam, light aggregates and shale. SHAFT SIZE: 3" - 9 5/8" SIZE RANGE: 12" - 54" HARD SURFACE WINGS Available in 3-, 4- or 5-wing variations, each features extensive use of carbide hard-surfacing to extend tool life. CENTRALIZING RING Large, hard-surfaced centralized ring insures the tool runs true in the bore. REPLACEABLE FLUID PORTS Located on the low pressure side of each wing, replaceable fluid ports presoak the oncoming cutter, which enhances fluid mixing. OPEN-BODY DESIGN Open-bodied design combines steep wing angles to make it a low-mass/low-torque tool that cuts smoothly and mixes efficiently. CARBIDE CUTTERS Located along the entire leading edge of each wing. Delivers aggressive cutting and extends service life. 62 StraightLineHDD Product Catalog - Volume 8 straightlinehdd.com

STEEP-TAPERED FLY CUTTER REAMER - A low-mass/low-torque solution with two rows of aggressive cutters and steeply-tapered wings ideally suited for hard ground and with larger rigs. GROUND CONDITIONS: Loam, light aggregates, shale and limestone. SHAFT SIZE: 3" - 9 5/8" SIZE RANGE: 12" - 54" REPLACEABLE FLUID PORTS Located on the low pressure side of each wing, replaceable fluid ports presoak the oncoming cutter, which enhances fluid mixing. OPEN-BODY DESIGN Open-bodied design combines steep wing angles to make it a low-mass/low-torque tool that cuts smoothly and mixes efficiently. HARD SURFACE WINGS Available in 3-, 4- or 5-wing variations, each features extensive use of carbide hard-surfacing to extend tool life. CENTRALIZING RING Large, hard-surfaced centralized ring insures the tool runs true in the bore. CARBIDE CUTTERS Located along the entire leading edge of each wing. Delivers aggressive cutting and extends service life. straightlinehdd.com Product Catalog - Volume 8 StraightLineHDD 63

REAMERS STRAIGHTLINEHDD CYCLONE REAMER - A low-torque tool that s the undisputed choice for sticky clay or sand. GROUND CONDITIONS: Sand, loam and sticky clays. SHAFT SIZE: 2 ½" - 6 ½" SIZE RANGE: 8" - 24" INDEPENDENT WING GROUPS Non-overlapping wing groups eliminate bitballing and bridging. CONICAL CARBIDE TEETH SOIL SHEAR PASSAGES Located along the entire leading edge Sheer passages provide additional of each wing. Delivers aggressive sheering points and minimizes balling. cutting and extended tool life. REPLACEABLE FLUID PORTS Perimeter located replaceable fluid ports deliver fluids exactly where it s needed. STEEP WING ANGLES Steep, hard-surfaced wing angles easily shed sticky clay. 800.654.3484 64 StraightLineHDD Product Catalog - Volume 8 straightlinehdd.com

CYCLONE-S REAMER - Steep paddle angles in a compact footprint, allow for large diameter tools. GROUND CONDITIONS: Sand, loam, clay and light aggregates. SHAFT SIZE: 3" - 9 5/8" SIZE RANGE: 14" - 48" SOIL SHEAR PASSAGES Sheer passages provide additional sheering points and minimizes balling. INDEPENDENT WING GROUPS Non-overlapping wing groups eliminate bitballing and bridging. REPLACEABLE FLUID PORTS Perimeter located replaceable fluid ports deliver fluids exactly where it s needed. STEEP WING ANGLES Steep, hard-surfaced wing angles easily shed sticky clay. CONICAL CARBIDE TEETH Located along the entire leading edge of each wing. Delivers aggressive cutting and extended tool life. straightlinehdd.com Product Catalog - Volume 8 StraightLineHDD 65

REAMERS STRAIGHTLINEHDD TRI-ACTION REAMER - This long, tapered body, cuts, pulverizes and packs cuttings in a variety of conditions. GROUND CONDITIONS: Loam, clay, hardpan, aggregates and rock formations up to 15,000 PSI. SHAFT SIZE: 3" - 4 ¼" SIZE RANGE: 6", 8" & 10" TAPERED SPIRAL BODY The long, tapered relief flutes allow easy passage of cuttings, small aggregates and fluids. CONICAL CARBIDE TEETH Aggressive conical carbide teeth deliver excellent cutting action and extend service life. HARD SURFACING All leading edges are protected by carbide hard surfacing for maximum service life. TANG, PIN OR OPTIONAL BUILT-IN SWIVEL The optional built-in swivel reduces the tool s overall length and keeps the tool in place when pushing backwards. REPLACEABLE FLUID PORTS Located on the taper portion of the body ensures efficient fluid mixing. 66 StraightLineHDD Product Catalog - Volume 8 straightlinehdd.com

ALL-TERRAIN REAMER - Valued for its aggressive ability to cut, mix and pack in one easy pass. GROUND CONDITIONS: Clay, aggregate and rock formations up to 20,000+ PSI. SHAFT SIZE: 2" - 9 5/8" SIZE RANGE: 8" - 48" FULLY-WELDED BODY Welded steel plate construction provides unequaled service life. CONICAL CARBIDE TEETH Aggressive conical carbide teeth deliver excellent cutting action and extended service life. OPTIONAL BUILT-IN SWIVEL The optional built-in swivel reduces the tool s overall length and keeps the tool in place when pushing backwards. AGGRESSIVE SPIRAL FLUTES Spiraling flutes deliver smooth cutting action and provide an excellent channel for passage of cuttings and fluids. REPLACEABLE FLUID PORTS Located on the taper portion of the body ensures efficient fluid mixing. straightlinehdd.com Product Catalog - Volume 8 StraightLineHDD 67

REAMERS STRAIGHTLINEHDD HURRICANE REAMER - A versatile all-in-one tool that cuts, mixes and packs. GROUND CONDITIONS: Sand, loam and clay. SHAFT SIZE: 2" - 4 ¼" SIZE RANGE: 6" - 20" PACKING BELL The unique geometry of the packing bell efficiently packs cuttings and facilitates utility installation. MIXING PADDLES The mixing paddles overcut the body, and facilitate fluid movement. HARD SURFACING All leading edges are protected by carbide hard surfacing for maximum service life. OPTIONAL BUILT-IN SWIVEL The optional built-in swivel reduces the tool s overall length and keeps the tool in place when pushing backwards. REPLACEABLE FLUID PORTS Located on the face of the reamer optimizes fluid placement. CARBIDE CUTTERS Lead-in carbide cutters, placed on independent paths, engage the entire bore face. 68 StraightLineHDD Product Catalog - Volume 8 straightlinehdd.com

CRUSHER REAMER - The solid body design and carbide placement has proven to be a perfect match for diameters that are too small for a hole opener. GROUND CONDITIONS: Hardpan, cobble and rock formations to 25,000 PSI. SIZE RANGE: 4" - 10" PRESSED BUTTONS Carbide in independent cutting paths. CARBIDE CHOICE Choose a short round carbide for hard rock conditions or a chisel top for softer formations. SOLID BODY One piece solid body design maximizes performance and tool life. TAPERED BODY ANGLE Transitions to the full diameter in rear section of the tool for stabilization in the hole. REPLACEABLE FLUID PORTS Perimeter located replaceable fluid ports deliver fluids exactly where it s needed. DON T FORGET WRENCH KIT SEE PAGE 84 straightlinehdd.com Product Catalog - Volume 8 StraightLineHDD 69

REAMERS STRAIGHTLINEHDD REVERSE RADIAL FLOW REAMER - The toughest, open body, bi-directional design available anywhere. GROUND CONDITIONS: Loams, moderate aggregates, clay, shale and light rock formations. SHAFT SIZE: 4" - 9 5/8" SIZE RANGE: 16" - 72" CENTRALIZED WING Large hard-faced centralized ring insures the tool runs true in the bore. OPEN BODY DESIGN Open-bodied design yields smooth cutting and excellent mixing in a low-mass/ low-torque design. REPLACEABLE FLUID PORTS Located on the low pressure side of each wing, replaceable fluid ports presoak the oncoming cutter, enhancing fluid mixing. CONICAL CARBIDE TEETH Aggressive conical carbide teeth deliver excellent cutting action and extend service life, in both pull and push-back. 70 StraightLineHDD Product Catalog - Volume 8 straightlinehdd.com

DON T FORGET MUD MIXER SEE PAGE 76 straightlinehdd.com Product Catalog - Volume 8 StraightLineHDD 71

REAMERS STRAIGHTLINEHDD STANDARD BARREL REAMER - Stabilize the tunnel and eases utility installation. GROUND CONDITIONS: Sand, loam, clay and light aggregates. SHAFT SIZE: 3" - 5" SIZE RANGE: 12" - 30" LONG FULL DIAMETER BODY The long, full diameter body stabilizes and centers the reamers and utility in the hole during pullback. CONICAL CARBIDE TEETH Carbide teeth, placed on independent paths, engage the entire bore face. REPLACEABLE FLUID PORTS Located on the face of the barrel optimizes mud flow and fluid placement. 72 StraightLineHDD Product Catalog - Volume 8 straightlinehdd.com

MAXI-BARREL REAMER - Stabilize the tunnel and eases utility installation. GROUND CONDITIONS: Loams, moderate aggregates, clay, shale and light rock formations. SHAFT SIZE: 4 ¼" - 9 5/8" SIZE RANGE: 24" - 96" LONG FULL DIAMETER BODY The long, full diameter body stabilizes and centers the reamers and utility in the hole during pullback. DON T FORGET WRENCH KIT SEE PAGE 84 REPLACEABLE FLUID PORTS Located on the face of the barrel optimizes mud flow and fluid placement. CONICAL CARBIDE TEETH Aggressive conical carbide teeth placed to cut a hole slightly larger than the diameter of the barrel body. straightlinehdd.com Product Catalog - Volume 8 StraightLineHDD 73

REAMERS STRAIGHTLINEHDD MAXI FLY-CUTTER REAMER - This tool is a three wing design featuring three large cutting surfaces and three equal-sized spoil passage areas. Constructed of ¾- or 1-inch plate (depending on tool size), welded to a 1-inch central ring, the Maxi-Fly is designed to handle the torque and pullback of today s maxi-rigs. GROUND CONDITIONS: Loams, moderate aggregates, clay, shale and light rock formations. SHAFT SIZE: 4 1/8" - 9 5/8" SIZE RANGE: 24" - 96" CENTRALIZING RING Large, hard surfaced centralizing ring made from 1-inch thick steel insures the tool runs true in the hole. REPLACEABLE FLUID PORTS Located on the low pressure side of each wing, replaceable fluid ports presoak the oncoming tooth, enhancing fluid mixing. SEMI-OPEN BODY DESIGN With three cutting wings and three open spoils passage areas, the design delivers aggressive cutting and excellent mixing in a low-mass/low-torque reamer. CONICAL CARBIDE TEETH Located on three surfaces, aggressive replaceable conical carbide cutters deliver excellent cutting performance and extend tool life. 74 StraightLineHDD Product Catalog - Volume 8 straightlinehdd.com

HOLE OPENER - Delivers smooth cutting in solid formations from shale to granite. GROUND CONDITIONS: Solid, non-compactible formations from caliche to granite. SHAFT SIZE: 3" - 9 5/8" SIZE RANGE: 10" - 60" CONE SPACING Tool performance is closely tied to minimizing the distance between individual cones and between cones and the shaft. CONE SELECTION Proper cone type and size are also key considerations. The cone s cutting structure is selected based on the specific rock formation. Cone size is also dependent on tool diameter. PUSHBACK CAP Pushback caps provide a tapered surface on the back side of the reamer to assist pushing the tool backwards, when required. FRONT STABILIZER When a gap greater than 2-inches exists between the cone and the shaft, all tools are fitted with a centralizer to help center the tool and force rock to the outside. A front stabilizer insures smoother cutting and longer tool life. 800.654.3484 Tip: Hole openers are highly specialized tools. Cutter selection, mill tooth or tungsten carbide insert (TCI) cutters, size/quantity/placement of cones and stabilizer requirements are all variables that must be considered. Since building our first hole opener over 20 years ago, the StraightLineHDD team has the experience to guide you through the process. straightlinehdd.com Product Catalog - Volume 8 StraightLineHDD 75

MUD MIXING SYSTEMS Performix mud mixers and specialty tanks are field-proven to have you drilling faster than anything else on the market. At the heart of the system is a precision-engineered Venturi jet that shears, mixes and yields bentonite platelets with incredible efficiency. ALL PERFORMIX MUD MIXERS FEATURE: High capacity pumps designed to turn the fluid tank over in as little as two minutes. Reliable power from Kohler gas or diesel engines. Large capacity hopper with a pivoting lid that doubles as a bag rest. Compact design minimizes footprint and adapts to any truck or trailer. High capacity fuel tanks keep you mixing longer. STRAIGHTLINEHDD SL300 MIX SYSTEM A complete mixer/300-gallon mixing solution, the SL300 is built on a self-contained, compact platform that s easily mounted to any truck or trailer. (See reference chart.) GREAT VALUE 3101-300 Performix SL300 Mix System 700 lbs. $6,500.00 76 StraightLineHDD Product Catalog - Volume 8 straightlinehdd.com

PERFORMIX MIXER The Performix Mixer with its 365-gpm output will get you from bentonite introduction to fully sheared, yielded and ready to drill in a matter of minutes. Two key features are electronic start and self-lubricating mechanical seals designed to resist damage, even when the pump is run dry. An optional enclosed secure cabinet is also available. * The Performix Mixer is the ideal match for our 700-gallon (2,650 liter) tanks. (See reference chart.) * Optional Enclosed Cabinet 3102-710 With 710-gal. mud tank assembly 925 lbs. $11,500.00 3102-000 Without mud tank assembly 416 lbs. $6,000.00 Tip: Fluid management is critical, providing lubrication, cooling, spoils management and stability to the bore. Thus, properly designed drilling fluids must be considered as much a tool as the drill itself. straightlinehdd.com Product Catalog - Volume 8 StraightLineHDD 77

MUD MIXING SYSTEMS PERFORMIX ULTRA Taking performance to the next level with 465-gpm output, the Performix Ultra has a 20 Hp engine, electronic start and self-lubricating mechanical seal designed to resist damage, even when the pump is run dry. An optional enclosed secure cabinet is also available. * Pair the Performix Ultra with the 1,000-gallon (3,800 liter) tank for maximum performance. (See reference chart.) STRAIGHTLINEHDD D250 MIX SYSTEM The D250 combines the proven performance of the Performix mud mixing platform with the power and convenience of a 25 Hp (18.7 Kw) diesel engine. The D250 features an enclosed, secure cabinet, electronic start and a self-lubricating mechanical seal designed to resist damage, even when the pump is run dry. Pair with the 1,000-gallon (3,800 liter) tank for maximum performance. (See reference chart.) * Optional Enclosed Cabinet PKG3103- With 1,000-gal. tank assembly 1,370 lbs. $13,000.00 100SQ 3103-000 Without tank assembly 470 lbs. $7,000.00 3105-1010 With 1,000-gal. tank assembly 1,845 lbs. $21,800.00 3105-000 Without tank assembly 890 lbs. $15,300.00 78 StraightLineHDD Product Catalog - Volume 8 straightlinehdd.com

REFERENCE CHART Engine Pump PERFORMIX SL300 PERFORMIX MIXER PERFORMIX ULTRA PERFORMIX D250 Kohler Command CS Pro 6 Hp (4.5 Kw) 170-gpm (11 lbs.) designed to turn tank over in less than 2 minutes Kohler Command CS Pro 14 Hp (10.5 Kw) gas engine 365 gpm (23 lbs.) designed to turn tank over in less than 2 minutes Kohler 20 Hp (15 Kw) gas engine w/electric start 450-gpm (28 lbs.) designed to turn tank over in about 2 minutes Kohler 25 Hp diesel engine w/electric start 450-gpm (28 lbs.) designed to turn tank over in about 2 minutes Fuel Tank 6-gallon (23 L) 10-gallon (38 L) 10-gallon (38 L) 10-gallon (38 L) Hopper Large capacity with pivoting lid that doubles as a bag rest Large capacity with pivoting lid that doubles as a bag rest Large capacity with pivoting lid that doubles as a bag rest Large capacity with pivoting lid that doubles as a bag rest Jet High speed jet High speed jet High speed jet High speed jet Mechanical Seal n/a Yes, seal is constantly lubricated (the pump can be run dry without damaging the seal) Connections Mounting 2-inch (5.1 cm) suction and discharge ports w/ball valves Adapts easily to any truck or trailer 3-inch (7.6 cm) camlock on suction side; 3-inch (7.6 cm) hose barb on discharge side; 2-inch (5.1 cm) male cam-lock for supply hose Adapts easily to any truck or trailer Yes, seal is constantly lubricated (the pump can be run dry without damaging the seal) 3-inch (7.6 cm) camlock on suction side; 3-inch (7.6 cm) hose barb on discharge side; 2-inch (5.1 cm) male cam-lock for supply hose Adapts easily to any truck or trailer Yes, seal is constantly lubricated (the pump can be run dry without damaging the seal) 3-inch (7.6 cm) camlock on suction side; 3-inch (7.6 cm) hose barb on discharge side; 2-inch (5.1 cm) male cam-lock for supply hose Adapts easily to any truck or trailer straightlinehdd.com Product Catalog - Volume 8 StraightLineHDD 79

MUD MIXING SYSTEMS STRAIGHTLINEHDD PERFORMIX TANKS Combining unique geometries with precision fluid dynamics, StraightLineHDD engineers have solved the problem of fluids settling at the bottom of the tank. The result tanks that maximize mixing action and tank roll. SL700 MIX SYSTEM TANK The SL700 mixing tank provides superior mixing characteristics by combining a precision designed radius bottom with three powerful interior tank guns. The tank is mounted on a heavy steel frame that makes mounting on truck or trailer a breeze. DON T FORGET MARSH FUNNEL SEE PAGE 85 80 StraightLineHDD Product Catalog - Volume 8 straightlinehdd.com

43.80 go online TO ORDER NOW! 68.63 64.80 9.26 10.45 66.16 43.75 92.00 4.93 103.79 SL1000 MIX SYSTEM TANK The SL1000 mixing tank provides superior mixing characteristics by combining a precision designed radius bottom with four powerful interior tank guns. A pronounced front-to-back slope is incorporated into the tank design, which together with the precision radius, eliminates fluid settlement issues. The tank s 44-inch wide footprint enables the installation of two tanks on a standard truck bed. The tank is mounted on a heavy steel frame that makes mounting a breeze. 3110-710 710-Gallon Mud Tank Assembly 570 lbs. $5,500.00 SL1000 1,000-Gallon Mud Tank Assembly 940 lbs. $6,000.00 straightlinehdd.com Product Catalog - Volume 8 StraightLineHDD 81

DRILLING SUPPLIES STANDARD EXPANDING PULLERS STRAIGHTLINEHDD StraightLineHDD offers two types of pullers, designed to grip the inside of polyethylene ducting. Our standard expanding pullers feature expanding jaws that spread the pulling load around the inside wall of the duct. This allows the maximum load to be applied without damaging the duct. * 1604-100-01 1" (fits 0.925" to 1.160" ID).95 lbs. $115.00 1604-100-02 1 1/4" (fits 1.2" to 1.5" ID) 1.15 lbs. $130.00 1604-100-03 1 1/2" (fits 1.45" to 1.75" ID) 1.55 lbs. $158.00 1604-100-04 2" (fits 1.7" to 2.15" ID) 2.9 lbs. $204.00 1604-100-05 2 1/2" (fits 2.2" to 2.6" ID) 4.95 lbs. $277.00 1604-100-06 3" (fits 2.55" to 3.2" ID) 8.4 lbs. $324.00 1604-100-07 4" (fits 3.275" to 4.1" ID) 13.74 lbs. $392.00 1604-100-08 5" (fits 4.17" to 5.125" ID) 21.2 lbs. $578.00 1604-100-09 6" (fits 5.13" to 6.08" ID) 24.75 lbs. $704.00 1604-100-10 8" (fits 6.45" to 7.95" ID) 28.30 lbs. $872.00 * A duct sleeve is recommended to prevent stretching when thin wall duct installations. Use of a duct plugger is recommended to prevent fluids from entering the ducting. 82 StraightLineHDD Product Catalog - Volume 8 straightlinehdd.com

INNER DUCT PULLERS WIRE MESH PULLERS Manufactured of hi-fatigue plastic coated aircraft strand steel cable, with a patented, stress-relieving pulling eye, these wire mesh pullers are recommended whenever high strength and small size are required. 1602-100-01 3/4" (fits 0.72" - 0.93" ID).54 lbs. $41.50 1602-100-02 1" (fits 0.94" - 1.15" ID).79 lbs. $44.50 1602-100-03 1 1/4" (fits 1.26" - 1.44" ID) 1.39 lbs. $50.00 1602-100-04 1 1/2" (fits 1.48" - 1.66" ID) 2.00 lbs. $56.00 1602-100-05 2" (fits 1.91" - 2.08" ID) 3.2 lbs. $71.50 1602-100-06 Driving Tool (fits all sizes) 1.5 lbs. $49.00 1603-100-01 3/4" - 1 1/4" Double Weave, 24" L 1.1 lbs. $45.36 1603-100-03 1 1/2" - 2" Triple Weave, 26" L 1.3 lbs. $72.75 1603-100-04 2" - 2 3/4" Triple Weave, 32" L 1.8 lbs. $83.17 1603-100-05 2 3/4" - 3 1/2" Triple Weave, 38" L 2.1 lbs. $122.30 1603-100-07 3 1/2" - 4 1/4" Triple Weave, 52" L 3.1 lbs. $137.94 1603-100-08 4 1/4" - 4 7/8" Triple Weave, 58" L 4.1 lbs. $154.90 1603-100-09 4 7/8" - 5 1/2" Triple Weave, 64" L 5 lbs. $283.76 straightlinehdd.com Product Catalog - Volume 8 StraightLineHDD 83

DRILLING SUPPLIES STRAIGHTLINEHDD BREAKOUT WRENCH KIT 80789 Wrench Kit, 3" - 5 3/4" 95 lbs. $1,295.00 80789-C Wrench Kit, 2 5/8" - 5 3/4" 95 lbs. $1,295.00 StraightLineHDD's portable breakout wrench kit provides a value-priced tool for safe and reliable breaking of torqued joints. Its compact design and light weight make it easy to handle in tight spaces. This kit is designed for use with tool outer diameters of 3" through 5 ¼". 84 StraightLineHDD Product Catalog - Volume 8 straightlinehdd.com

MARSH FUNNEL & CUP COPPERHEAD THREAD LUBE 102-610-02 Marsh Funnel, Viscometer.7 lbs. $27.00 102-611-02 Measuring Cup, Viscometer.45 lbs. $8.00 StraightLineHDD offers everything you need for mud mixing, including accessories like this tough funnel/ viscometer and measuring cup/viscometer. Call us for pricing on polymers, lubrication and bentonite drilling fluid additives. 4201-001-02 20 lb. Container 21 lbs. $79.00 Extend the thread life of all your connections with Copperhead thread lube. The formulation features a unique combination of copper flakes, graphite, nonmetallic solids and extreme pressure additives to protect against wear, galling and seizing. straightlinehdd.com Product Catalog - Volume 8 StraightLineHDD 85