KODIAK Technical specifications KODIAK KODIAK KODIAK KODIAK KODIAK KODIAK KODIAK KODIAK / 0 / / / 6 / 8 / 0 / / Capacity m 3 0 6 8 0 Number of augers Length mm 5500 5650 5650 5650 650 650 650 Width max. mm 350 500 500 500 800 800 800 Height mm 700 850 3050 300 3000 300 300 Height of lowered versions By request By request By request By request By request By request By request Wheel track mm 550 700 700 700 000 000 000 Number of axles Number of wheels Wheels size 5.0/55-7 5.0/55-7 5.0/55-7 5/75-7,5 5/75-7,5 5/75-7,5 5/75-7,5 Requested power HP 60 70 80 90 00 0 0 Tractor PTO speed rpm 50 50 50 50 50 50 50 Weight Kg 000 700 500 5700 600 600 6700 KODIAK Trailed vertical diet feeder KODIAK / KODIAK KODIAK KODIAK KODIAK KODIAK KODIAK 6 / 0 / 5 / 30 / 35 / 0 / Capacity m 3 6 0 5 30 35 0 Number of augers Length mm 7300 7600 8000 800 800 8800 Width max mm 00 350 500 500 500 800 Height mm 650 650 850 300 300 350 Height of lowered versions By request By request By request By request By request By request Wheel track 550 600 700 700 700 000 Number of axles Number of wheels 8 8 8 Wheels size 5/75-7,5 5/75-7,5 5/75-7,5 5/75-7,5 5/75-7,5 385-7,5 Requested power HP 80 0 30 50 50 80 Tractor PTO speed rpm 50 50 50 50 50 50 Weight Kg 6600 7000 9500 0000 0500 000 Single and twin augers Standard features Optional features Modular chassis with adjustable drawbar Mechanical brakes or Hydraulic brakes or Pneumatic brakes Front discharge on both sides Stainless steel floor and chains for discharge elevator Gearbox for auger speeds Rear discharge on both sides Two counter knives, hand operated Hydraulic counter knives Self contained hydraulic system Automatic control of engagement time for counter blades Manual side jack Hydraulic side jack Retainer ring Electro-hydraulic controls Controls by Bowden cables Weighing system display repeater Weighing system Double axle, rigid or steering Sgariboldi reserves the right to make any modification it may consider useful at any time and without notice thereof Sgariboldi s.r.l. Via Pietro Nenni 685 CODOGNO Lodi (Italy) Tel- ++39 0377.3005 Fax ++39 0377.305 www.sgariboldi.it - info@sgariboldi.it
The high resistance chassis with adjustable drawbar ensure high deendability and long durability. The front discharge on both sides is a standard feature for all models. By request the discharge elevator can have stainless steel chains and floor. Mixing fast and homogeneous Available capacities: - single auger, from 0 to m 3 - twin augers, from 6 to 0 m 3 The counter knives in the mixing hopper brake efficiently the products and ensure the clean cut of long stemmed products. The retainer ring is a standard feature for all models. Kodiak functions are controlled by means of hydraulic valves and Bowden cables. The control levers can be easily located in the tractor cab. By request controls by solenoid valves are available. Designed for medium and large size farms, Kodiak mixers are very versatile and dependable, thus granting high productivity and reduced maintenance. Depending from capacity, Kodiak standard versions have single or twin axles, with single or twin wheels. Industrial epicycloid gearboxes drive the augers and a -speed gearbox allows a complete discharge of the mix. Accessories for any need Rear steering axle and bogie axles Common features of Kodiak range are the simple construction, the high capacity and the high thickness of floor and walls. Double axle Hydraulic shifting of discharge elevator Rear discharge on both sides Accurate design and top quality components result in very high performance with reduced power absorption and remarkable energy saving. Kodiak makes feeding an easy job and cuts feeding time. Magnet on the discharge The electronic weighing system with stainless steel square cells is very flexible and meets the requirement of most demanding farmers. Mechanical or hydraulic hopper for concentrates
Model MAV type 500 - Technical specifications MAV TYPE 500 MAV 5 FARM MAV 5 FARM MAV 57 FARM Capacity m 3 7 Wheel drive Front Front Front Type of driving axle S50 S50 S50 No. of speeds Speed km/h 0 / 0 / 0 / 0 Length mm 8500 8800 9000 Max. width mm 50 00 00 Standard height mm 50 700 800 Height of lowered version By request By request By request Loading drum width mm 500 500 500 Loading arm width Kw/PS 50 50 50 Loading height kg 700 700 700 Front and rear wheels mm 85/70-9,5 35/60-.5 35/60-.5 Front track mm 860 00 00 Rear track mm 860 00 00 Rear track, WS version mm 050 50 50 Rear track with rear suspensions mm 900 050 050 Rear track with rear suspensions and brakes mm 00 350 350 Diesel engine Nominal power/maximum power HP J.D. 05 5 / 3 J.D. 05 5 / 3 J.D. 05 5 / 3 Weight Kg 8000 8500 9500 MAV 500 Modular Advanced Vehicle Horizontal self-propelled mixer-feeder with single auger Features of standard versions Reversible fan of the engine cooler Discharge chain elevator on the left side Electric equipment with working, parking and head lights Loading drum with double rotation Loading arm with stainless steel bottom and side plates High comfort cab Ventilation and heating system Weighing system Optional features Differential lock Magnet on the discharge elevator Lights for public roads Two speeds of loading elevator Partial internal lining in Hardox or stainless steel Central greasing system Monitor with video-cameras Air conditioning The Firm reserves the right to make any modification it may consider useful at any time and without notice thereof The evolution Ten years of success with MAV 00 The self-propelled mixer-feeder with compact dimensions and exceptional performance Hydraulic lifting of discharge elevator (option) -wheel-steering (option) to enhance the manoeuvrability of the machine Central greasing system (option) Sgariboldi s.r.l. Via Pietro Nenni 685 CODOGNO Lodi (Italy) Tel- ++39 0377.3005 Fax ++39 0377.305 www.sgariboldi.it - info@sgariboldi.it
The loading drum is the keystone of the whole working system. It has been used for many years in the whole world and it treats the products with power and gentleness, thus preserving their structure. Loading drum New design cab The new cab has been designed in all details to ensure the best operator s comfort, manoeuvrability and visibility in any working condition. All controls are within hand reach, in ergonomic position and easy to operate. Compact and easy to handle Durable and efficient on the grass silage Precise and incisive on the maize silage Tough and resolute even on the compact heart of wrapped bales Accurate and regular on concentrates and meals With a fast and uniform flow the products are conveyed in the mixing tank, where the auger looks after mixing them. MAV, designed for medium to large size farms, is the most compact, easy to handle and cost effective self-propelled diet feeder. Accurate design and top quality components result in very high performance with reduced power absorption and remarkable energy savings. Thanks to its most compact dimensions MAV drives easily through the narrowest of passages. A mixture quality beyond comparison High resistance chassis for heavy duty allows exceptionally compact dimensions. Front-wheel-drive with industrial steering axle. The simple design of the machine allows for unrivalled appetibility and digestibility. With Monofeeder a soft and homogeneous mix is obtained, fresh and chopped at the right size, that keeps the nutritional properties of each ingredient and intensifies the fodder quality. The exceptional homogeneity of the mix, certified by official tests, ensures the distribution of the same diet with uniformity along the whole trough. The gentle treatment of the products ensures an excellent fodder value of the silage and prevents the heating of the final mix. SG version For special needs a non-chopping version has been developed. It mixes in exceptional way pre-chopped products and ensures a complete emptying of the tank at the end of the distribution. Diesel engine located on the front right side, with electronic control complying with Tier 3 standard and reversible fan of the engine cooler are standard features. When open, the engine cover gives full access to the diesel engine and the hydrostatic system. Covers are easy to open and allow fast cleaning and maintenance of the machine.
Technical specifications without loading system with loading system 7 ST 7 DF 0 ST ST 6 ST 0 DF MONOFEEDER 7 ST ST ST 7 ST 7 DF DF DF 7 DF Capacity m 3 7 7 0 6 7 7 0 Length mm 5600 600 600 6700 6900 7300 7300 600 7000 700 7500 7700 800 Width mm 900 000 300 300 550 550 750 950 050 350 350 600 600 Standard height mm 00 50 650 750 950 950 3300 00 50 650 750 950 950 Optional height mm Lower version by request Lower version by request Wheel track mm 700 850 00 00 50 50 700 700 850 00 00 50 50 Unloading height mm 500 500 600 600 700 800 800 500 500 600 600 700 800 Unloading side Left Left Loading drum width mm - - - - - - - 650 650 650 050 050 050 Loading height mm - - - - - - - 3800 3900 00 500 500 500 Power Kw/PS 37/50 /60 59/80 67/90 73/00 8/0 88/0 /60 59/80 67/90 73/00 8/0 88/0 Weight kg 00 300 000 500 5300 6000 8000 3300 00 5000 5500 6500 700 Ausstattung der Maschinen without loading system with loading system 7 ST 7 DF 0 ST ST 6 ST 0 DF MONOFEEDER 7 ST ST ST 7 ST 7 DF DF DF 7 DF Adjustable hitch Left side discharge Auger reversing gearbox Remote control by cables Mechanical parking brake Independent hydraulic system Hand operated side foot Hydraulic side foot Electronic weighing system Cardan shaft Self-loading drum with reverse drive Automatic antiblocking system Rear safety protection DF DF MONOFEEDER Trailed horizontal diet feeder One single auger two dynamic flows Standard By request Options for ST and DF Hydraulic central foot Pyton Fix - Magnet - Hydraulic brakes - Pneumatic brakes - Loader for fodder - Extended discharge elevators - Hydraulic lift of discharge elevator - Left and right side discharge - Remote electric controls - Antiwearing steel bottom - Stainless steel lining - Bale Kit - Programmable weighing system Sgariboldi reserves the right to make any modification it may consider useful at any time and without notice thereof Left and right side discharge (options) Hydraulic lift of discharge elevator (options) Remote electric controls (options) Sgariboldi s.r.l. Via Pietro Nenni 685 CODOGNO Lodi (Italy) Tel- ++39 0377.3005 Fax ++39 0377.305 www.sgariboldi.it - info@sgariboldi.it
3 The Twin-Flow System At the beginning of the Nineties Sgariboldi introduced a revolutionary patented system named Monofeeder Twin-Flow, imitated but never equaled. Since then thousands of farmers that adopted this technique have seen their production grow considerably and have obtained at the same time a remarkable reduction in their operating costs. The system is based on the combined action of the single auger with opposing spirals and the moving deflector. Through the years the evolution of Monofeeder has strengthened the intrinsic values of the system: Independent hydraulic system Side foot 3 Self-loading drum with reverse drive Rear safety protection 5 Electronic weighing system 6 Mechanical parking brake 7 Remote control by cables 8 Adjustable hitch 9 Left side discharge The highest specification 3 High dependability given by the simple construction and the elimination of wearing parts like sprockets and chains. (3). Reduction in mixing time ensures preservation of the structure of the ingredients thanks to the twin flow and the efficient chopping action of knives and counter-knives (). Perfect utilization of the tank capacity through the movement of the products aimed at obtaining a soft mixture Reduction of maintenance and spare parts cost. Reduction of operating cost and saving of fuel. Versatility and construction quality RC version Monofeeder with the Bale Kit (patented) () allows any bale of variable consistency and size to be broken up in a few minutes and preserves the structure of the product. 3 7 6 5 SG version For special needs a none-chopping version has been developed. It mixes in exceptional way prechopped products and ensures a complete emptying of the tank at the end of the distribution (). Compact size The Monofeeder technology makes it possible to obtain machines with most compact size. The narrow shape and the low height of the tank allow to drive even in most confined spaces. 8 The auger protection device has obtained the prize for technical innovation at Eima 00. The Monofeeder are approved by the main institutes for safety homologation. 9 A mixture quality beyond comparison The single course signed by Sgariboldi has an unrivalled appetibility and digestibility. With Monofeeder a soft and homogeneous mixture is obtained, fresh and chopped at the right size, that keeps the nutritional properties of each ingredient and intensifies the fodder quality. The exceptional homogeneity of the mixture, certified by official tests, ensures the distribution of the same diet with uniformity along the whole trough. The gentle treatment of the products ensures an excellent fodder value of the silage and prevents the heating of the final mixture. An efficient and precise loading arm The loading arm of DF version can load any product. The careful design of the drum and the relevant housing, the layout of the knives and the very high power make it possible to load perfectly any product, silage and bales. The clamp face remains smooth and compact thus preventing it to go mouldy. The rear shield is conveniently shaped to collect the product down to the bottom and obtain a perfect cleaning of the ground. The arms are external to the tank, so that it is easier to load directly the ingredients with a loader.