PLEASE PURCHASE Excel Export To Multiple PDF Files Software Price quote for: Skid Steers Vendor Name: Ziegler Inc. Contact Person: Brad Sewell Street Address: 901 West 94th Street P.O. Box: City, State, Zip Bloomington, MN 55420 Phone #: 952-888-4121 Toll Free #: 800-352-2812 Fax #: 952-887-5820 Email Address: brad.sewell@zieglercat.com Version of Excel used: Spec # Information Requested Answer 1.0 MAKE AND MODEL Caterpillar 299D2XHP Engine Type and SAE net HP Tier Cat C3.8 DIT (Turbo) 106 HP Tier 4 Final Length w/o attachments 125.5" Height with operator cab 83.6" Ground clearance 9.6" Maximum height to bucket hinge pin 126.3" Breakout force 7,270 lb Reach at maximum height 19.4" Dump angle at maximum height 54 Degrees Dump height with standard bucket 94.5" Front clearance circle with standard bucket 91.1" Rear clearance circle 74" Tipping load - SAE rated Rated operating capacity - SAE Standard bucket capacity - SAE heaped rating Operating weight - SAE rated Travel speed Fuel tank capacity Cold weather starting assist Battery CCA Alternator size - amps Transmission type Tire / Track size / width Final drive chains and drive method Final drive chain adjustment / maintenance Gauges / instrumentation Pump type - GPM and PSI Control valves Hydraulic oil cooler Drive controls Lift and tilt controls Engine speed control Work lights - front 9,450 lb 4,725 lb.82 CYD 11,608 lb 8.4 mph Two Speed 32.2 gal Glow Plugs 1,000 CCA 100 amps Hydrostatic Track, Rubber, 15.7 IN (400MM) Drive sprocket to track drive Not required Gauges: fuel level, hour meter Instrumentation: Engine coolant temperature, engine oil pressure, hydraulic oil temperature Piston - Standard Flow 23 GPM & 3,335 psi - High Flow 40 GPM & 4,061 psi Hydraulic 3 section Included - air to oil Electro/Hydraulic - hand controls Electro/Hydraulic - hand controls Both foot and hand control Included 2 each
Spec # Information Requested Answer Work lights - rear Warranty Included 2 each 1 year Unlimited hour parts/labor BASE UNIT PRICE: $ 76,810.00
PLEASE PURCHAOEM OPTIONS AND ATTACHMENTS 1.0 Price for base unit: $ 76,810.00 2.0 Skid Steer Options: Use this section to offer additional skid steer options such as hand controls, gauges, heater, enclosed cab etc.. These options should be for skid steer power unit and not attachments. 2.1 PRESSURIZED CAB, HEATER/DEFROSTER, AIR CONDITIONING & DOOR INCLUDED 2.2 AIR SUSPENSION SEAT-CLOTH INCLUDED 2.3 ELECTRIC WORK TOOL CONTROL INCLUDED 2.4 TWO SPEED CONTROL INCLUDED 2.5 HYDRAULIC COUPLER INCLUDED 2.6 RIDE CONTROL INCLUDED 2.7 HIGH FLOW HYDRAULICS w/dual SELF LEVEL INCLUDED 2.8 DOOR, CAB, POLYCARBONATE INCLUDED 2.9 RADIO AM-FM, CD, BLUETOOTH $ 240.00 2.10 ADVANCED DISPLAY WITH BACKUP CAMERA INCLUDED 2.11 PROPORTIONAL HYDRAULICS INCLUDED 2.12 HEAVY DUTY BATTERY W/DISCONNECT INCLUDED 2.13 LIGHTS LED INCLUDED 2.14 BEACON LIGHT $ 150.00 2.15 RETURN TO DIG/ WORKTOOL POSITIONER INCLUDED 2.16 COUNTERWEIGHT, MACHINE EXTERNAL $ 1,050.00 2.17 SINGLE EYE LIFTING POINT $ 1,100.00 2.18 LIFTING EYE 4 POINT $ 230.00 2.19 FOPS, LEVEL 2 $ 2,600.00 2.20 PRODUCT LINK, CELLULAR, PL240 INCLUDED 2.21 OIL, HYDRAULIC, COLD OPERATION $ 570.00 2.22 PATTERN CHANGER $ 1,450.00 2.23 CASE DEDICATED CONTROLS $ 700.00 2.24 PAINT, CUSTOM $ 1,460.00 2.25 ON DEMAND FAN INCLUDED 2.26 REVERSING FAN $ 1,310.00 2.27 RUBBER TRACK 15.7" BLOCK INCLUDED 2.28 TRIPLE FLANGE IDLERS INCLUDED 2.29 STEEL TRACK 15.7" ONE SPEED TRAVEL $ 8,710.00 LAND MANAGEMENT PACKAGE 1 - DEBRIS GUARDS, DEBRIS PROTECTION, SPEED SENSOR 2.30 GUARDING, PRECLEANER, TURBO GUARD $ 3,780.00 2.31 LAND MANAGEMENT PACKAGE 2 - LM1 PLUS AUXILIARY HYDRAULIC COOLER $ 8,710.00 3.0 Bucket Options: Use this section to offer bucket options such as standard, snow or combination buckets, etc.. 3.1 BUCKET-GENERAL PURPOSE, BOLT ON CUTTING EDGE 60" $ 1,190.00 3.2 BUCKET-GENERAL PURPOSE, BOLT ON CUTTING EDGE 66" $ 1,300.00 3.3 BUCKET-GENERAL PURPOSE, BOLT ON CUTTING EDGE 72" $ 1,410.00 3.4 BUCKET-GENERAL PURPOSE, BOLT ON CUTTING EDGE 78" $ 1,530.00 3.5 BUCKET-GENERAL PURPOSE, BOLT ON CUTTING EDGE 84" $ 1,640.00 3.6 BUCKET-LIGHT MATERIAL, BOLT ON CUTTING EDGE 72" $ 1,470.00 3.7 BUCKET-LIGHT MATERIAL, BOLT ON CUTTING EDGE 78" $ 1,580.00 3.8 BUCKET-LIGHT MATERIAL, BOLT ON CUTTING EDGE 84" (1.1 CU. YD.) $ 1,700.00 3.9 BUCKET-LIGHT MATERIAL, BOLT ON CUTTING EDGE 84" (1.4 CU. YD.) $ 1,650.00 3.10 BUCKET-LIGHT MATERIAL, BOLT ON CUTTING EDGE 96" $ 1,810.00 3.11 BUCKET-LIGHT MATERIAL, BOLT ON CUTTING EDGE 102" $ 1,730.00 3.12 BUCKET-LOW PROFILE, BOLT ON CUTTING EDGE 54" $ 780.00 3.13 BUCKET-LOW PROFILE, BOLT ON CUTTING EDGE 60" $ 890.00 3.14 BUCKET-LOW PROFILE, BOLT ON CUTTING EDGE 66" $ 1,010.00 3.15 BUCKET-LOW PROFILE, BOLT ON CUTTING EDGE 72" $ 1,120.00 3.16 BUCKET-LOW PROFILE, BOLT ON CUTTING EDGE 78" $ 1,230.00 3.17 BUCKET-MULTI-PURPOSE, BOLT ON CUTTING EDGE, 60" $ 3,250.00 3.18 BUCKET-MULTI-PURPOSE, BOLT ON CUTTING EDGE W/SG, 60" $ 3,210.00 3.19 BUCKET-MULTI-PURPOSE, BOLT ON TEETH 60" $ 3,250.00 3.20 BUCKET-MULTI-PURPOSE, BOLT ON TEETH W/SG 60" $ 3,210.00 3.21 BUCKET-MULTI-PURPOSE, W/BO EDGE 66" $ 3.22 BUCKET-MULTI-PURPOSE, W/BO EDGE 66" W/SG $ 3.23 BUCKET-MULTI-PURPOSE, BOLT ON TEETH 66" $ 3.24 BUCKET-MULTI-PURPOSE, BOLT ON TEETH 66" W/SG $ 3.25 BUCKET-MULTI-PURPOSE, BOLT ON CUTTING EDGE 72" $ 3,720.00 3.26 BUCKET-MULTI-PURPOSE, BOLT ON CUTTING EDGE 72" W/SG $ 3,770.00 3.27 BUCKET-MULTI-PURPOSE, BOLT ON TEETH 72" $ 3,720.00 3.28 BUCKET-MULTI-PURPOSE, BOLT ON TEETH 72" W/SG $ 3,770.00 3.29 BUCKET-MULTI-PURPOSE, BOLT ON CUTTING EDGE 78" $ 4,070.00 3.30 BUCKET-MULTI-PURPOSE, BOLT ON CUTTING EDGE 78" W/SG $ 4,040.00 3.31 BUCKET-MULTI-PURPOSE, BOLT ON TEETH 78" $ 4,070.00 3.32 BUCKET-MULTI-PURPOSE, BOLT ON TEETH 78" W/SG $ 4,040.00 3.33 BUCKET-MULTI-PURPOSE, BOLT ON CUTTING EDGE 84" $ 4,300.00
3.34 BUCKET-MULTI-PURPOSE, BOLT ON CUTTING EDGE 84" W/SG $ 4,320.00 3.35 BUCKET-MULTI-PURPOSE, BOLT ON TEETH 84" $ 4,320.00 3.36 BUCKET-MULTI-PURPOSE, BOLT ON TEETH 84" W/SG $ 4,320.00 3.37 BUCKET-TOOTH, BOLT ON TEETH 60" $ 1,250.00 3.38 BUCKET-TOOTH, BOLT ON TEETH 66" $ 1,350.00 3.39 BUCKET-TOOTH, BOLT ON TEETH 72" $ 1,450.00 3.40 BUCKET-TOOTH, BOLT ON TEETH 78" $ 1,570.00 3.41 BUCKET-TOOTH, BOLT ON TEETH 84" $ 1,670.00 3.42 BUCKET-UTILITY, BOLT ON CUTTING EDGE 60" $ 1,080.00 3.43 BUCKET-UTILITY, BOLT ON CUTTING EDGE 66" $ 1,280.00 3.44 BUCKET-UTILITY, BOLT ON CUTTING EDGE 72" $ 1,470.00 4.0 Overtire tracks: Use this section to offer overtire tracks. 4.1 5.0 Pallet forks: Use this section to offer fork options, such as pallet forks, bale handler, etc.. 5.1 FORKS, 48" PALLET W/ CARRIAGE $ 900.00 5.2 FORKS, 66" INDUSTRIAL GRAPPLE $ 5,040.00 5.3 FORKS, 72" INDUSTRIAL GRAPPLE $ 6,020.00 6.0 Adaptor plate: Use this section to offer adaptor plate options. 6.1 UNIVERSAL ADAPTER PLATE $ 220.00 7.0 Snowblower: Use this section to offer snowblower options. 7.1 SR117 SNOW BLOWER, 67" WORKING WIDTH, 14-20 GPM HYDRAULIC FLOW $ 6,760.00 7.2 SR118 SNOW BLOWER, 73" WORKING WIDTH, 18-22 GPM HYDRAULIC FLOW $ 7,510.00 7.3 SR121 SNOW BLOWER, 85" WORKING WIDTH, 18-23 GPM HYDRAULIC FLOW $ 7,840.00 7.4 SR318 SNOW BLOWER, 73" WORKING WIDTH, 26-34 GPM HYDRAULIC FLOW $ 8,100.00 7.5 SR321 SNOW BLOWER, 85" WORKING WIDTH, 26-34 GPM HYDRAULIC FLOW $ 8,610.00 8.0 Sweeper: Use this section to offer sweeper options. 8.1 BA118C, MANUAL ANGLE, 83" WIDTH $ 6,040.00 8.2 BA118C, HYDRAULIC ANGLE, 83" WIDTH $ 7,210.00 8.3 BP115C, PICKUP BROOM $ 5,600.00 8.4 BP118C, PICKUP BROOM $ 6,020.00 8.5 BU115, UTILITY BROOM $ 4,090.00 8.6 BU118, UTILITY BROOM $ 4,450.00 9.0 Backhoe: Use this section to offer backhoe options. 9.1 BACKHOE, BH150 (INCLUDES D SERIES MOUNTING BRACKET AND 24" BUCKET). $ 16,570.00 9.2 BACKHOE, BH160 W/ AUXILIARY (INCLUDES D SERIES MOUNTING BRACKET AND 24" BUCKET). $ 17,760.00 10.0 Planer: Use this section to offer planer options. 10.1 COLD PLANER, PC104B, 14" WORKING WIDTH, 16-21 GPM REQUIRED HYDRAULIC FLOW $ 10,860.00 10.2 COLD PLANER, PC205B, 18" WORKING WIDTH, 21-31 GPM REQUIRED HYDRAULIC FLOW $ 13,680.00 10.3 COLD PLANER, PC305B, 18" WORKING WIDTH, 26-33 GPM REQUIRED HYDRAULIC FLOW $ 16,100.00 10.4 COLD PLANER, PC306B, 24" WORKING WIDTH, 26-33 GPM REQUIRED HYDRAULIC FLOW $ 19,060.00 10.5 COLD PLANER, PC408B, 30" WORKING WIDTH, 40 GPM REQUIRED HYDRAULIC FLOW $ 21,100.00 10.6 COLD PLANER, PC310B, 39" WORKING WIDTH, 33 GPM REQUIRED HYDRAULIC FLOW $ 24,990.00 10.7 COLD PLANER, PC412B, 47" WORKING WIDTH, 40 GPM REQUIRED HYDRAULIC FLOW $ 27,110.00 11.0 Snow Plow: Use this section to offer snow plow options. 11.1 SNOW PLOW, 72" $ 3,650.00 11.2 SNOW PLOW, 84" $ 3,850.00 11.3 SNOW PLOW, 96" $ 4,050.00 11.4 SNOW PLOW, 108" $ 4,310.00 11.5 SNOW PLOW, 120" $ 4,860.00 11.6 SNOW PUSH, SSL, STD DTY 8' $ 3,580.00 11.7 SNOW PUSH, SSL, STD DTY 10' $ 4,270.00 11.8 SNOW PUSH, SSL, STD DTY 12' $ 5,020.00 12.0 Hydraulic breaker: Use this section to offer hydraulic breaker options. 12.1 H55E HAMMER WITH SSL MOUNTS $ 10,170.00 12.2 H65E HAMMER WITH SSL MOUNTS $ 12,050.00 13.0 Grapple: Use this section to offer grapple options. 13.1 BUCKET, UTILITY GRAPPLE 66" $ 2,610.00 13.2 BUCKET, UTILITY GRAPPLE 72" $ 2,820.00 13.3 BUCKET, INDUSTRIAL GRAPPLE 60" $ 3,820.00 13.4 BUCKET, INDUSTRIAL GRAPPLE 66" $ 4,000.00 13.5 BUCKET, INDUSTRIAL GRAPPLE 72" $ 4,480.00 13.6 BUCKET, INDUSTRIAL GRAPPLE 78" $ 4,930.00 13.7 GRAPPLE RAKE 72" $ 3,400.00 13.8 GRAPPLE RAKE 84" $ 3,810.00
14.0 Landscape: Use this section to offer landscape options. 14.1 BRUSHCUTTER, BR160, 60" $ 5,090.00 14.2 BRUSHCUTTER, BR166, 66" $ 5,330.00 14.3 BRUSHCUTTER, BR172, 72" $ 5,570.00 14.4 BRUSHCUTTER, BR272, 72" HF $ 5,810.00 14.5 BRUSHCUTTER, BR378, 78" HF,XPS $ 6,990.00 14.6 LANDSCAPE RAKE, LR15B $ 6,640.00 14.7 LANDSCAPE RAKE, LR18B $ 7,230.00 14.8 LANDSCAPE TILLER, LT13B $ 5,080.00 14.9 LANDSCAPE TILLER, LT18B $ 6,120.00 14.10 MULCHER, HM112C, 49", 16-18 GPM REQUIRED HYDRAULIC FLOW $ 20,990.00 14.11 MULCHER, HM115C, 58", 20-23 GPM REQUIRED HYDRAULIC FLOW $ 22,080.00 14.12 MULCHER, HM215C, 58", 25-31 GPM REQUIRED HYDRAULIC FLOW $ 22,890.00 14.13 MULCHER, HM315C, 58", 31-33 GPM REQUIRED HYDRAULIC FLOW $ 30,220.00 14.14 MULCHER, HM415C, 58.6", 36-41 GPM REQUIRED HYDRAULIC FLOW $ 32,910.00 14.15 MULCHER, HM418C, 67.2", 40-41 GPM REQUIRED HYDRAULIC FLOW $ 34,990.00 14.16 POWER BOX RAKE-HYDRAULIC,PR172 $ 8,740.00 14.17 POWER BOX RAKE-HYDRAULIC,PR184 $ 9,240.00 14.18 POWER BOX RAKE-HYDRAULIC,PR190 $ 9,970.00 14.19 POWER BOX RAKE-MANUAL, PR172 $ 8,740.00 14.20 POWER BOX RAKE-MANUAL, PR184 $ 9,240.00 14.21 POWER BOX RAKE-MANUAL, PR190 $ 9,970.00 14.22 STUMP GRINDER, SG16B $ 7,210.00 14.23 STUMP GRINDER, SG18B $ 8,000.00 14.24 TRENCHER, T6B, 36" BOOM LENGTH $ 4,970.00 14.25 TRENCHER, T9B, 48" BOOM LENGTH $ 5,050.00 14.26 TRENCHER, T15B 6", 60" BOOM LENGTH $ 7,840.00 15.0 Grader: Use this section to offer grader options. 15.1 BB121, 84", GRADING BOX, INCLUDES TECHNOLOGY AND INSTALLATION. $ 27,615.00 15.2 BB124, 96", GRADING BOX, INCLUDES TECHNOLOGY AND INSTALLATION. $ 27,990.00 15.3 BLADE, DOZER, 6-WAY, 79" $ 5,982.00 15.4 BLADE, DOZER, 6-WAY, 92" $ 6,573.00 16.0 Auger: Use this section to offer auger options. 16.1 AUGER, A14B $ 2,060.00 16.2 AUGER, A19B $ 2,450.00 16.3 AUGER, A26B, HF $ 3,910.00 16.4 BIT, AUGER 6" $ 260.00 16.5 BIT, AUGER 9" $ 420.00 16.6 BIT, AUGER 12" $ 510.00 16.7 BIT, AUGER 15" STANDARD $ 590.00 16.8 BIT, AUGER 18" $ 680.00 16.9 BIT, AUGER 24" $ 850.00 16.10 BIT, AUGER 30" $ 950.00 16.11 BIT, AUGER 36" $ 1,320.00 16.12 BIT, AUGER 6" INDUSTRIAL $ 420.00 16.13 BIT, AUGER 9" INDUSTRIAL $ 490.00 16.14 BIT, AUGER 12" INDUSTRIAL $ 560.00 16.15 BIT, AUGER 16" INDUSTRIAL $ 830.00 16.16 BIT, AUGER 18" INDUSTRIAL $ 850.00 16.17 BIT, AUGER 24" INDUSTRIAL $ 1,120.00 16.18 TREE BIT, AUGER 24" $ 780.00 16.19 TREE BIT, AUGER 36" $ 1,220.00 16.20 ADAPTER, AUGER - HEX TO ROUND $ 120.00 16.21 ADAPTER, AUGER - ROUND TO HEX $ 150.00 16.22 EXTENSION, TELESCOPING 3' $ 300.00 16.23 EXTENSION, TELESCOPING 6' $ 500.00 16.24 EXTENSION, AUGER 12" $ 130.00 16.25 EXTENSION, AUGER 24" $ 170.00
17.0 Wheel saw: Use this section to offer wheel saw options. 17.1 WHEEL SAW, SW345B, 3" $ 21,000.00 17.2 WHEEL SAW, SW360B, 3" $ 23,580.00 17.3 WHEEL SAW, SW360B, 6" $ 25,220.00 17.4 WHEEL SAW, SW360B, 8" $ 27,260.00 17.5 WHEEL SAW, SW460B, 3"/6"/8" $ 29,930.00 17.6 WHEEL SAW, SW380B, 10" $ 33,580.00 18.0 Vibratory roller: Use this section to offer vibratory roller options. 18.1 CV16B, VIBRATORY COMPACTOR $ 10,280.00 18.2 CV18B, VIBRATORY COMPACTOR $ 11,020.00 19.0 Other: Use this section to offer any other option not already covered. 19.1 S305, SSL SHEARS (INCLUDES MOUNT) - 9.4" JAW OPENING $ 28,770.00 19.2 MATERIAL HANDLING ARM, 84", 2,000 LB. CAPACITY $ 1,430.00 19.3 MB200, MIXING BUCKET $ 5,980.00 19.4 MB250, MIXING BUCKET $ 6,260.00 20.0 EXTENDED WARRANTY OPTIONS Use this section to offer performance/warranty options, number these items starting with 20.1, 20.2, 20.3, etc. (Specify years, miles or hours extended term covers.) 20.1 2 Year - 1,000 Hour Premier Warranty $ 2,190.00 20.2 2 Year - 2,000 Hour Premier Warranty $ 3,270.00 20.3 2 Year - 3,000 Hour Premier Warranty $ 4,480.00 20.4 3 Year - 1,000 Hour Premier Warranty $ 3,110.00 20.5 3 Year - 2,000 Hour Premier Warranty $ 5,460.00 20.6 3 Year - 3,000 Hour Premier Warranty $ 6,450.00 20.7 2 Year - 1,000 Hour Powertrain Plus Hydraulic Warranty $ 1,200.00 20.8 2 Year - 2,000 Hour Powertrain Plus Hydraulic Warranty $ 1,800.00 20.9 2 Year - 3,000 Hour Powertrain Plus Hydraulic Warranty $ 2,470.00 20.10 3 Year - 1,000 Hour Powertrain Plus Hydraulic Warranty $ 1,710.00 20.11 3 Year - 2,000 Hour Powertrain Plus Hydraulic Warranty $ 3,000.00 20.12 3 Year - 3,000 Hour Powertrain Plus Hydraulic Warranty $ 3,540.00 20.13 2 Year - 1,000 Hour Powertain Warranty $ 720.00 20.14 2 Year - 2,000 Hour Powertain Warranty $ 1,080.00 20.15 2 Year - 3,000 Hour Powertain Warranty $ 1,480.00 20.16 2 Year - 4,000 Hour Powertain Warranty $ 1,640.00 20.17 2 Year - 5,000 Hour Powertain Warranty $ 1,800.00 20.18 3 Year - 1,000 Hour Powertain Warranty $ 1,020.00 20.19 3 Year - 2,000 Hour Powertain Warranty $ 1,800.00 20.20 3 Year - 3,000 Hour Powertain Warranty $ 2,130.00 20.21 3 Year - 4,000 Hour Powertain Warranty $ 2,350.00 20.22 3 Year - 5,000 Hour Powertain Warranty $ 2,590.00 20.23 4 Year - 1,000 Hour Powertain Warranty $ 1,130.00 20.24 4 Year - 2,000 Hour Powertain Warranty $ 1,870.00 20.25 4 Year - 3,000 Hour Powertain Warranty $ 2,340.00 20.26 4 Year - 4,000 Hour Powertain Warranty $ 3,380.00 20.27 4 Year - 5,000 Hour Powertain Warranty $ 3,720.00 20.28 5 Year - 1,000 Hour Powertain Warranty $ 1,250.00 20.29 5 Year - 2,000 Hour Powertain Warranty $ 1,920.00 20.30 5 Year - 3,000 Hour Powertain Warranty $ 2,580.00 20.31 5 Year - 4,000 Hour Powertain Warranty $ 3,710.00 20.32 5 Year - 5,000 Hour Powertain Warranty $ 5,340.00 20.33 *does not include travel charges 20.34 *see attached warranty statement 21.0 NEW EQUIPMENT RENTAL PROGRAM If rental programs are available on the new equipment offered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent of rental fee paid by the purchaser that will be applied to the purchase price. See Solicitation Special Terms & Conditions. If the new rental equipment is purchased and finance Charges are applicable for the actual rental term only. State the actual interest rate here: 7.00% Hourly Rental Rate: $40.00 Weekly Rental Rate: $1,400.00 Monthly Rental Rate: $4,200.00 Percent (%) of Rental Fee applied to purchase price: 85% 22.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAM (See Solicitation Special Terms and Conditions.) DEDUCT cost per Used Hour from the original Contract Price $22.00 23.0 DELIVERY STARTING POINT - City, State, Zip (See Special Terms and Conditions - no flat rate allowed.) Price Per Loaded Mile: $3.00 24.0 INSTALLATION - PER HOUR (Hourly Shop Rate): Installation services may be requested on an "as needed" basis - see special terms and conditions.) $130.00
25.0 PRICE FOR ADDITIONAL SERVICE MANUAL $950.00 26.0 PRICE FOR ADDITIONAL PARTS MANUAL $50.00 27.0 PRICE FOR ADDITIONAL OPERATIONS MANUAL $50.00