SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 YANFENG GLOBAL AUTOMOTIVE INTERIOR SYSTEMS CO. LTD. YFAI Center of Excellence Laboratory 921 East 32 nd Street Holland, MI 49423 Arnie Suigussaar Phone: 616 394 2240 Email: Arnold.Suigussaar@yfai.com MECHANICAL Valid To: October 31, 2018 Certificate Number: 3932.01 In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to this laboratory to perform the following automotive interior trim tests: Temperature Testing: - Drive-in chamber: (-40 to 110) C, 38 C, 95% RH, 50 C, 30% RH - Walk-in chambers: (-40 to 140) C, 38 C, 95% RH, 50 C, 30% RH - Reach-in chambers: (-40 to 140) C, 38 C, 95% RH, 50 C, 30% RH Vibration Testing: Sine and Random (5 to 2000) Hz, up to 4500 lbf, 3-axis, Shock up to 100 G's, and Vibration. Durability and Lifecycle Testing: Custom-designed fixtures for ambient and temperature extremes. Safety Testing: Flammability, Development testing for ECE Reg. 21, FMVSS 208, and FMVSS 201. Material Testing: Humidity; Tensile, Compression, and Flex up to 6,000 lb. Load; Paint, Colorfastness, Color and Gloss Evaluation. Test Type: Test Description: Equipment: Test Method(s): 1 Accelerated Aging Accelerated Exposure, Heat Aging Drive-in, Walk-in, and Reach-in s TM-GEN-002 5 ; DIN EN ISO 527 1-5; DIN 53377; DIN EN ISO 2440; DIN ISO 2796; DBL 5306 section 6.2; DBL 5306 section 7.2; DBL 5404 section 7.19; DBL 5471 sections 4.1, 4.2, and 4.3; DIN EN ISO 6270-2; TM-GEN-010 5 (A2LA Cert No. 3932.01) Revised 09/28/2018 Page 1 of 6
Accelerated Aging with IR Variable Surface Temperature Heat Exposure Test, Sunload Induced Temps and IR Heaters DVM 9104 Fade Accelerated Exposure of Atlas Automotive Interior Trim Using a Weatherometer Control Irradiance Water Cooled Xenon-Arc Apparatus SAE J1885; SAE J2412; DIN EN ISO 105-B06 Impact Cold Resistance Ball Drop Test DBL 5306 section 7.3 Solar Simulation Aging Automobile Components in Solar Simulation Units Solar Simulation Fixture and DIN 75220; DVM 9104 Adhesion 2 Peel or Stripping Strength of Adhesive Bonds, Bond Strength of Trim Assemblies Tensile Testing Machine with Oven ASTM D903; DIN 53357; DIN EN ISO 1372; FLTM-BN-151-05; GM 3602M section 3.5 (Inactive 08.2010) Cleaning 2 Cleaning/Solvent Resistance of Automotive Components During Normal Customer Use Soiling and Cleanability Test for Interior Trim Materials Scale, Weight, MacBeth Light GM 9900P, Procedure A; FLTM BN-112-08 Crocking 2 Colorfastness to Crocking (Rubbing) Atlas Crockmeter, AATCC Scale AATCC Test Method 8; DIN EN ISO 105-X12; MBN 10494-5 section 5.8.2; SAE J861 Color Evaluation Color Change Evaluation MacBeth Light, (Visual) 2 AATCC Scale AATCC Evaluation Proc 1; DIN EN 20105-A02; DIN EN ISO 105-B06 Chromatic Change MacBeth Light, AATCC Scale AATCC Evaluation Proc 8 Color Evaluation MacBeth Light FLTM BI-109-01 Color Determination of color fastness of interior materials in motor vehicles, xenon arc lamp test Xenon SAE J1885; VDA 75202; DIN EN ISO 105-B06 (A2LA Cert No. 3932.01) Revised 09/28/2018 Page 2 of 6
Compression Rigid cellular plastics - Determination of compression properties (ISO 844:2014); German version EN ISO 844:2014 Apparatus Material Tester DIN EN ISO 844 Compression Set Rubber, vulcanized or thermoplastic - Determination of compression set - Part 1: At ambient or elevated temperatures Apparatus Material Tester DIN ISO 815-1 Flex 2 Flexural Properties of Unreinforced and Reinforced Plastics Tensile Testing Machine ASTM D790; DIN EN ISO 14125; DIN EN ISO 178; DIN EN ISO 3386-1; DIN EN ISO 1856 Fog Accelerated Fogging Test (60 o BYK Gardner Gloss Meter) Digital Balance Spectrophotometer Air Bath Oil Bath SAE J1756; DIN 75201; DIN 75201-B; TSM 0503G; GM 9305P Functional Tests Lamp Switch Cycle Life Cycle Fixture TM-LMP-001 3 Door Cycle Cycle Fixture TM-IPL-025 3 Door Panel Durability Cycling Instrument Panel Glove Box Cycling Cycle Fixture, Load Cells, PLC Cycle Fixture, Force Gage TM-DPL-018 3 TM-IPL-002 3 Instrument Panel Glove Box Door Vertical Loading Force Gage TM-IPL-003 3 Floor Console Cover Cycle Life Floor Console Loading Button Travel / Force Force Gage, Cycle Fixture Load Fixture, LVDT or Dial Indicator Load Cell w/ Servo Motor, or Force Gage and Indicator TM-FLC-002 3 TM-FLC-019 3 TM-GEN-037 3 Gloss 2 Specular Gloss Gloss Meter ASTM D523 (A2LA Cert No. 3932.01) Revised 09/28/2018 Page 3 of 6
Odor Hot Odor Test for Insulation Materials, Glass Jars SAE J1351; TSM 0505G; VDA 270 Paint 2 Paint Adhesion Test Tesa Tape ASTM D3359, Methods A and B; DBL 5381 section 8.3; FLTM BI-106-01, Methods B and D Resistance to Water Spotting (only) FLTM AN-101-01 Water and Soap Spotting Test for Paint Water Immersion Test for Painted Parts and Panels Oven, Weatherometer (SAE J1885 only) Water Bath, Thermometer FLTM BI-113-01 FLTM BI-104-01 Cure Test GMW 15891 Resistance of Paint Films to Various Fluids DBL 5404 section 7.15; LP-463PB-31-01, Methods B, D, F, and J Sunscreen Lotion Resistance DBL 5404 section 7.14; GMN 10033; GMW1445 Blistering DIN EN ISO 4628-2 Cracking DIN EN ISO 4628-4 Thickness DIN EN ISO 2808 Paints and Varnishes DIN EN ISO 2808 Safety Airbag Deployment Testing at Extremes Ambient and Temperature, High- Speed Video Cameras, DAQ System TM-GEN-050 3 Flammability 2 Atlas Flammability Cabinet DBL 5307; FMVSS 302; SAE J369 (A2LA Cert No. 3932.01) Revised 09/28/2018 Page 4 of 6
Scratch Resistance Scratch and Mar Resistance Using Erichsen Scratch Hardness Equipment Yanfeng developed Erichsen Scratch Tester LP-463DD-18-02 Scratch Resistance 2 Resistance to Scratching, Scratch and Mar Resistance (visual evaluation only ) Taber 5 Finger Scratch Device Scuffing & Mar 2 Resistance to Scuffing Taber Abrader w/ Scuff Attachment DBL5306 section 3.1; FLTM BN-108-13; GMN 3943; MBN 10494-5 section 5.1.1 FLTM BN-108-04 Resistance to Scuffing of Trim Materials Taber Abrader w/ Scuff Attachment DIN/EN/ISO 105-X12; SAE J365 Staining 2 Resistance of Coated Fabrics and Plastic Film to Migration Staining and Blocking Measuring Scale, Weight Scale, Weight FLTM BN-103-01 Staining Evaluation AATCC scale AATCC Evaluation Proc 2 Tear Strength Rubber, vulcanized or thermoplastic - Determination of tear strength- Part 1: Trouser, angle an crescent test pieces apparatus material tester DIN ISO 34-1 Temperature Lens Surface Temperature Hand-Held Thermometer, Tensile properties 2 Tensile Properties of Plastics Tensile Testing Machine Vibration Vibration BSR 4500 Lbf, 2000 Lbf Electro Dynamic, 500 Lbf Permanent Magnet Shakers TM-LMP-007 3 ASTM D638; DIN EN ISO 1798; DIN EN ISO 527-1; DIN EN ISO 527-2; DIN EN ISO 527-3; DIN EN ISO 527-4; ISO 1926 TM-GEN-032 3 (A2LA Cert No. 3932.01) Revised 09/28/2018 Page 5 of 6
Vibration (Cont d) Objective Subsystem/Component Squeak and Rattle Test 500 Lbf Permanent Magnet Shakers, Quiet Room, Microphones, Software GMW 14011; CETP 1.01-L-407 Vibration Durability Mechanical Shock Vibration 4500 Lbf, 2000 Lbf Electro Dynamic Shakers 4500 Lbf, 2000 Lbf Electro Dynamic Shakers 4500 Lbf, 2000 Lbf Electro Dynamic Shakers, s TM-GEN-031 3 ; TSPM-PLUS-ST-04-07-19- E 3 TM-GEN-003 3 CETP 1.01-L-407 Visual Evaluation 2 Indentation and Recovery FLTM BO-111-02 Resistance to Mildew WSS-M15P27-D section 3.9 On the following Materials: Leather, Plastic, Rubber, Textiles, Metals, and composites of these materials. Using methods and standards from the following sources: FMVSS, ECE, NHTSA, SAE, ASTM, Chrysler, Ford, General Motors, Toyota, Honda, Nissan, and other Tier One specification and standards directly related to the parameters listed above. 1 When the date, revision or edition of a test method standard is not identified on the scope of accreditation, the laboratory is required to be using the current version within one year of the date of publication, per Part C, Section 1 of A2LA R101 - General Requirements - Accreditation of ISO-IEC 17025 Laboratories. If a specifier/regulator imposes a different transition period, this will supersede the A2LA one year implementation period. 2 Tests conducted in the Materials lab at ambient conditions of 23 +/- 2C, 50 +/- 5% RH 3 Test Methods are Internally Developed Methods by Yanfeng Automotive Interiors and are site specific. 4 This laboratory s scope contains withdrawn / superseded / inactive methods. As a clarifier, this indicates that the applicable method itself has been withdrawn or is now considered historical and not that the laboratory s accreditation for the method has been withdrawn. (A2LA Cert No. 3932.01) Revised 09/28/2018 Page 6 of 6
Accredited Laboratory A2LA has accredited YANFENG GLOBAL AUTOMOTIVE INTERIORS CO. LTD. Holland, MI for technical competence in the field of Mechanical Testing This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated April 2017). Presented this 18 th Day of February 2016. President & CEO For the Accreditation Council Certificate Number 3932.01 Valid to October 31, 2018 Revised September 28, 2018 For the tests to which this accreditation applies, please refer to the laboratory s Mechanical Scope of Accreditation.