GDR Warning. 02 Specifications

Similar documents
Aftermath Kraken AK-47 Airsoft Rifle Owner's Manual

Echo 1 VMG-74 Owner's Manual Cortesía de Universo Sniper Airsoft,

Echo 1 M16 Rifle Cortesía de Universo Sniper Airsoft,

COMPONENT DIAGRAM : LMG ENHANCED

FSG175 FENCE STAPLE GUN

LASER ENHANCED SEMI-AUTOMATIC GRIP OWNER S MANUAL RED LASER GREEN LASER

Automated socks packaging machine PS-1

KJWORKS KJ-M4V2 MANUAL

KJWORKS KJ-M4V3 MANUAL

CLEAN ROOM DEVICES, LLC "WHERE TUBING AND FITTINGS COME TOGETHER"

CRD610 Automatic Fitting Inserter

18V CORDLESS STAPLER/NAILER

CORDLESS TACKER MODEL NO: CCT48 OPERATION & MAINTENANCE INSTRUCTIONS PART NO: LS0414

CRD600 Automatic Fitting Inserter

PNEUMATICS CONTENTS HST-TAMPER

TECHNICAL MANUAL. FOR BLAST 2 (Bright Light Aiming System Tactical 2) For Rifles and Pistols Equipped with MIL-SPEC-1913 and Picatinny Rails

CONGRATULATIONS. on your purchase of a Viridian Grip Laser, the most advanced sighting device available.

CLEAN ROOM DEVICES, LLC "WHERE TUBING AND FITTINGS COME TOGETHER"

Safety, Operation and Maintenance Instructions For Long & Short Nose Upholstery Air Stapler (NS10 & NS11)

PWS MK2, MOD1 USER MANUAL END USER MAINTENANCE MANUAL

Tooling Assistance Center

Assembly and Usage Instructions

MICRO WHEN SPEED AND ACCURACY MATTER USER MANUAL

PERFORM THE FOLLOWING SAFETY CHECK DAILY:

FPC835M Air Hydraulic Rivet Tool

PERMANENTLY BONDED IN,

Trench Filler for Compact Utility Loaders

CZ-USA SHOTGUN INSTRUCTION MANUAL CZ-USA

Functional Description and Specifications. Intended Use. Packing List. Technical Specifications

Angle Grinder Holder

DM-TRSL (English) Dealer's Manual. ROAD MTB Trekking. City Touring/ Comfort Bike. Shifting lever DEORE XT SL-T8000 DEORE SL-T6000

Air Hydraulic Rivet Tool

DM-MBSL (English) Dealer's Manual. ROAD MTB Trekking. City Touring/ Comfort Bike. Shifting lever SLX SL-M7000 DEORE SL-M6000

PORTABLE ASPEN. Part Number 42643

Operating Manual. FloorMaster FS Flooring Stapler A18201 READ ALL SAFETY INSTRUCTIONS

Tactical Laser Illuminator

Lift N Go [Model 210] Electric Carrier For use with power chairs & scooters Installation Guide & Owners Manual

BOLT-ON AND WELD-ON FLUSH FLOOR SLIDEOUT SYSTEMS OPERATION AND SERVICE MANUAL

IMPORTANT! DO NOT THROW AWAY THE SHIPPING CARTON AND PACKING MATERIAL

W & A 12 ROW TOP LEVELING STACKER LEVEL BANDER

PROCESSOR UNIT - V3 WITH WIRING GERMANY VERSION. (no burst, no fullauto) Spring limit M160 and ROF 25bb/s

M1A1 Thompson Upgrade

Heavy Duty Jack Stands

DM-ST (English) Dealer's Manual. Dual control lever ST-9001 ST-9000 ST-6800 ST-5800 ST-4700 ST-4703

MODEL 25-OM-10-C & 25-OA-10-C HYDRAULIC BOOSTER

Installation / Operating Manual. Infinity Series Model AS2002. Distributed by: Shyda s Services Inc.

ACCUSENSE CHARGE SERIES ON/OFF BOARD FULLY AUTOMATIC BATTERY CHARGER

FPC815 Pneumatic Rivet Tool

OWNER'S MANUAL WARNING DANGER. Propane cylinders sold separately. The propane cylinder must be disconnected when this firebowl is not use.

Trouble Shooting Guide For HIPERTOUCH Series Triggers

Mechanical Disc Brake

Hydraulic Immediate Need Power Pack

Backhoe for Dingo Compact Utility Loaders

18 GAUGE FLOORING STAPLER. Models: /13

Hydraulic Bead Breaker Kit

OLYMPIAN MODEL 740 Operation and Service Manual

Winch Trouble Shooting Guide

PRESSURISED SANDBLASTER

Backhoe for Compact Utility Loaders

GDK Black Wing Auto Trap

R.A.G.E. TCS. Instruction & Safety Manual. Rapid Adjustable Gas Expulsion Total Compensation System

OPERATION AND PARTS MANUAL

Service Manual Gulf Stream Electronic Full Wall Slide Systems

4400-Lb. Capacity Extra-Long Pallet Jack

2014 Lancer Systems all rights reserved

12 Volt Heavy-Duty Air Inflator

DO NOT RETURN TO STORE! ROSSO MOTORS ELECTRIC ATV OWNERS MANUAL. Read and understand this manual Prior to Riding!

4V LITHIUM-ION SCREWDRIVER OWNER S OPERATING MANUAL

Operating Instructions BNT-40 Automatic Rebar Tying Machine

PRESSURISED SANDBLASTER

SAVE THESE INSTRUCTIONS

4400-Lb. Capacity Pallet Jack

INSTALLATION INSTRUCTIONS. Feel free to contact us at with any questions you may have regarding your Lasergrips.

Log Splitter. Owner/Operator Manual. Models HCWP1-26

TenPoint Crossbow Technologies TM ACUDRAW TM INSTRUCTION MANUAL THIS MANUAL COVERS:

HALOGEN FLOODLIGHTS Models CHL1260C & 1260T Part Nos: &

Adjustable Angled Incline Conveyor Owners Manual with Operating Instructions

RAUTOOL G2 BATTERY HYDRAULIC TOOL KIT PRODUCT INSTRUCTIONS. Construction Automotive Industry

110 Volt/12 Volt Portable Inflator

THE GIANT-VAC PTO BLOWER MODELS 2000*/3200**/4000***

Mechanical Disc Brakes

Hydraulic PTO Flow Device

Appendix A1. IPSC Match Levels. Key: N/A = Not Applicable, R = Recommended, M = Mandatory

610 BUSHEL MANURE SPREADER

INSTRUCTIONS & MAINTENANCE SHEET PORTABLE BATTERY HYDRAULIC POWERPACK HAB1101

Tel: +44 (O) Customer Service hours: Monday - Friday 9am-5pm

Installation & Service Manual

INSTRUCTIONS MOLAD - + Warning Laser Light. Optional Accessories

STOP. 44" High Speed Sweeper. Operator's Manual. Model No Safety Assembly Operation Maintenance Parts

USER MANUAL TACTICAL FLASHLIGHTS. Triple Duty P4 & Triple Duty Q5

Powerboard TM by Exkate

The Wiremate Wizard Saves Hours! SA Patent: European Patent: EP

BEFCO. Operator s Manual BABY HOP & HOP FERTILIZER SPREADERS ACCESSORIES SIDE ROW DISCHARGE. AA4-120 (fits models Hop 209 & 212) DEFLECTOR

Standard Direct Impingement AR-15 Parts Check List

OPERATION AND PARTS MANUAL

SIP Direct Drive Oil-Lube Air Compressors - Operating & Maintenance Instructions

MODEL NUMBER: BD-116C USER GUIDE

Embedded Rack Slide-out System

G&G GR14 Airsoft Reassembly

Q'ty needed for quotes. No Item No. Description Image. Barrel Parts. Handguard Snap Ring Material: SK5 1 MS Weld Spring Material: 1075

Transcription:

01 Warning This product is only for properly trained adults, and may cause serious injury when misused. Before using the item, check and understand this instruction manual carefully, and follow them fully for safety. 02 Specifications Model Ammo. Type Length Item Weight Inner Barrel Length Ammo. Capacity Battery Type Hop-Up Muzzle Velocity Energy Firing Mode Bolt Action Take Down Blow Back Air Cocking Firing Control Package Included DAS (for global markets) 6mm Plastic BB 808 / 873mm About 3.0kgs 363mm About 60 rounds / Proprietorial Magazine of DAS Li-po 11.1v Battery (Not included) Adjustable Pursuant to destination countries' regulation Pursuant to destination countries' regulation Auto / Semi / Safe OK OK OK OK Proprietorial Mechanical System of DAS PTS Centurion Arms CMR 13.5, PTS Enhanced Polymer Grip (EPG) BLK, PTS Enhanced Polymer Stock (EPS) * Accessaries are subject to change. 01

03 Safety Rules WARNING For the safe and proper handling, always pay particular attention to all of the below warnings and cautions, and observe them for yourself and others. You can check more cautions and tips from VOD on GBLS website and YouTube. USE Never aim it at people or animals. Keep the muzzle of the airsoft gun pointed in a safe direction. Shoot only at proper targets. They could be broken or damaged. Do not shoot at hard or soft surface or the surface of water, or a ricochet may occur, and then hit someone or something you had not intended to hit. Use new, high-quality, plastic BBs only as a projectile. HARD BBs are recommended. Always wear eye protection while handling it. Do not risk your own eyes. Never look into the muzzle directly. Jammed BB could launch suddenly. Always assume that it is loaded. Never assume the chamber is empty. It could still fire jammed BB even after removing the magazine. Keep airsoft gun unloaded until ready to shoot. Keep your finger off the trigger until ready to shoot. Keep the selector on SAFE until ready to shoot. Make sure that no BB remains in the chamber after using. Do not fire without ammunition. It could be the cause for malfunction. Only use on the authorized land where full permission to shoot has been given from government. If you make it visible in public areas, people could be confused, and it may be a crime. Before use this item, check your government s stipulated minimum age, allowed shooting energy and required colored parts, and observe them. (Only orange tip is included in this package.) When transporting, carry it in a case or bag. You may be punished if you are shooting or displaying it for practical jokes, or threats. Do not handle it while under the influence of alcohol, medication, or drugs. 02

STORAGE Set the selector to SAFE position. Make sure all of BBs and battery are removed from the item. Keep out of reach of minors including children. Keep dry; Gun could be permanently damaged by water or moisture. Apply rust-preventing oil for firearms on the metal parts including outer barrel, selector, end plate, castle nut, magazine catch, bolt catch, trigger, and forward assist etc. They may be rusted due to moisture. After use the product, follow the procedure on pg7 and store it in a safe place. OTHERS It is user's sole duty to know and obey all laws governing the use and ownership of airsoft guns in your local area, and/or country. Never attempt to modify or convert it illegally. Modified item could be classified as a real arm under law, and you may be punished. Never try to change the piston (main) spring. It may result in a malfunction. Never try to access motor height adjustment(screw) at the bottom of pistol grip. Adjusting by users may cause a malfunction as well. When repair is needed, ask a skillful gun smith. A gun fixed by an user could be the cause of a malfunction, and a gun assembled poorly should be dangerous. If you cannot find a proper person, contact the distributor in your area. 03

04 Maintenance & Repair DAS products are needed the maintenance just like actual guns. Every time use the product, follow the instruction below, and contact a dealer /distributor in your area if you find any problem. If you cannot understand this manual fully, or if the gun does not operate well, contact the distributor in your area. A. How To Check BCG(Bolt Carrier Group). Gas Nozzle Bolts Auto Controller Tip & Pins BCG Cover Bolts Air nozzle There should be no loose bolt. There should be no loose bolt. Auto controller tip(black one) should be held in place and pins should not be sticked out at all. There should be no loose bolt and dent. DAS s standard bolt is in black. B. Applying Grease on BCG. Apply the grease on the BCG in order that the gun performs in top condition. Whenever use the product, check grease's remains and apply it frequently. Spread thinly. (Refer to Youtube VOD.) GBLS recommends AeroShell grease 22 or others has the similar materials with it; AeroShell grease 22 : Synthetic grease for aircraft US Military Specification : MIL-PRF-81322G 04

Where grease should be applied Upper Parts Lower Parts DAS s standard bolt is in black. C. How To Check Gearbox Parts Name Muzzle direction C A E D B A: 3RD GEAR SET l B: GEAR STOPERᅵ D: AUTO CONTROLLER l E: SEAR C: POWER-OFF LEVER 05

Muzzle direction C E A D B A. 3RD GEAR SET The right gear of the 3rd gear set engages with BCG's spur gear. When any tooth comes up to the top, it affects cycle and then system will be stopped. How to Check : 1. Take the gun down, and connect to battery. 2. Set selector to SEMI/AUTO and pull the trigger. 3. 3rd gear set starts turning. 4. Click "C"(Power-OFF Lever) and cut off electricity. 5. Check the position of right gear, and use if it is OK. O X X When you find a problem : Contact a dealer /distributor in your local area. B. GEAR STOPPER It controls 3rd gear set's engagement & disengagement. How to Check : 1. Take the gun down. 2. Press the part with yellow arrow lightly and check if it returns properly or not. When you find a problem : A spring inside is damaged. Find Gear Stopper Spring from Spare Parts Kit(sold separately), and replace it. C. POWER-OFF LEVER It helps to cut the system power manually. How to Check : 1. Take the gun down. 2. Press the part with yellow arrow lightly and check if it returns properly or not. When you find a problem : A spring inside is damaged. Find Power-Off Lever Spring from Spare Parts Kit (sold separately), and replace it. 06

e D. AUTO CONTROLLER It controls the system when Full Auto in order that BCG troubles continuously. It is lower when SEMI, but raised when the selector sets to AUTO and pull the trigger. How to Check : 1. Take the gun down. 2. Set the selector to AUTO, and pull the trigger. 3. Gears starts turning, and check if Auto Controller comes up. 4. After checking, stop the system by pushing C (Power OFF lever). When you find a problem : Replace Auto Controller Set. (sold separately.) d E. SEAR It holds the bolt cylinder after blowback. How to Check : 1. Take the gun down. 2. Press the part with yellow arrow really carefully and check if it returns properly or not. When you find a problem : A spring inside is damaged. Replace Sear Set. (sold separately.) D. How to store & change a battery. a. Remove bb remains in chamber, set select to SAFE, and then remove battery and magazine. b. Pull the trigger(firing) to release piston spring. c. Take the gun down. d. Press "C"(Power-OFF lever) to cut the power. F C F C Once push down "C"(Power-OFF lever), "F"(Power-ON lever) goes down like right image. These steps cut off the system power, and release Power-ON/OFF spring. Take the same steps when a battery needs to be replaced.(refer to Youtube VOD) Muzzle direction Find VODs about Maintenance & Troubleshooting at GBLS Youtube channel. 07

06 Component Diagram & List A. DAS 05 GEAR BOX 05-01 05-02 05-03 05-04 05-05 05-06 05-07 05-08 DM4-L-G001 DM4-L-G022 DM4-L-G024 DM4-L-G015 DM4-L-G014 DM4-L-G025 DM4-L-G020 DM4-L-G019 GEAR BOX SET STAINLESS STEEL BUSH SIM PLATE 3rd GEAR SET SEAR OPERATOR SET SEAR SET BOLT 2nd SPUR GEAR 1st BEVEL GEAR 06 BOLT CARRIER GROUP 06-01 06-02 06-03 06-04 06-05 06-06 06-07 06-08 06-09 06-10 06-11 06-12 06-13 DM4-L-B002 DM4-L-B004 DM4-L-B001 DM4-L-B014 DM4-L-B005 DM4-L-B003 DM4-L-B009 DM4-L-B013 DM4-L-B011 DM4-L-B012 DM4-L-B016 DM4-L-B006 DM4-L-B015 BOLT BOLT HOLDER BOLT CYLINDER SPRING GUIDE HOLDER BOLT GAS NOZZLE BOLT PIN BOLT RACK GEAR POWER-OFF LEVER GEAR LINK SET FULL AUTO TIP SET PISTON O-RING PISTON PISTON SPRING 06-14 06-15 07 STOCK 07-01 07-02 07-03 07-04 07-05 07-06 07-07 07-08 DM4-L-B008 DM4-L-B010 DM4-L-R004 DM4-L-R006 DM4-L-R010 DM4-L-R005 DM4-L-R001 DM4-L-R003 DM4-L-R002 DM4-L-R008 SPRING GUIDE BOLT COVER CASTLE NUT BUFFER BUFFER SPRING POWER CABLE COVER STOCK TUBE STOCK TUBE CAP STOCK POSITION RAIL PTS Enhanced Polymer Stock 08

01 FOREARM/BARREL 03 UPPER RECEIVER 01-01 01-02 01-03 01-04 01-05 01-06 01-07 DM4-L-F001 DM4-L-F002 DM4-L-F003 DM4-L-F006 DM4-L-F007 DM4-L-F008 DM4-L-F009 FLASH HIDER FLASH HIDER WASHER FLASH HIDER O-RING OUTER BARREL INNER BARREL BARREL EXTENSION HOP-UP CHAMBER SET 03-01 03-02 03-03 03-04 DM4-L-U003 DM4-L-U001 DM4-L-U002 DM4-L-U004 CHARGING HANDLE UPPER RECEIVER EJECTION PORT COVER FORWARD ASSIST KNOB 02 FOREARM/RIS 02 DM4-L-F004 PTS Centurion Arms CMR 13.5 04 LOWER RECEIVER 04-01 04-02 04-03 04-04 04-05 04-06 04-07 04-08 04-09 04-10 04-11 04-12 04-13 04-14 DM4-L-L001 DM4-L-L004 DM4-L-L003 DM4-L-L002 DM4-L-L006 DM4-L-L005 DM4-L-L014 DM4-L-L011 DM4-L-L010 DM4-L-L009 DM4-L-L008 DM4-L-E002 DM4-L-L015 DM4-L-L016 LOWER RECEIVER SPRING GUIDE HOLDER SELECTOR LEVER BOLT CATCH MAGAZINE CATCH SET DUMMY SELECTOR END PLATE LOCKING PIN SET PIVOT PIN SET TRIGGER GUARD SET PTS Enhanced Polymer Grip NEODYMIUM MOTOR DUMMY PIN DUMMY PIN 08 MAGAZINE 08-01 DM4-L-L012 MAGAZINE 09

B. SPECIAL TOOLS a. BB Loader Adapter GBLS s BB loader adapter works with your BB loader to mate properly with DAS s magazine for easy reloading. Put included adapter on BB loader taking care with its direction, and road BBs like you usually do. b. Hop-up Adjustment Wrench Users can adjust hop-up by turning adjustment screw with black arrow. Take down the gun, remove the bolt carrier group, and adjust hop-up with included hex wrench. CW : Screw - Fasten/ Hop-up - turn down (-) CCW : Screw - Loosen/ Hop-up - turn on (+) 10

05 Trouble Shooting Guide SYMPTOMS Not Firing Reduced Recoil Shock Full Auto Feature not Functioning CAUSE Selector lever on Safe mode Low power/ Dead battery Wrong installation of battery Blown out fuse Ended motor s Life Loose connection with motor Not loaded Low battery power Low battery power Faulty BB fed SOLUTIONS Change selector to Semi Auto/ Full Automatic Mode. Recharge/Replace battery. Install battery correctly. Replace with a new fuse. Replace the motor. (Contact the distributor) Tighten connectors at the bottom of motor. After installing the magazine, load BB according to the position of bolt carrier group; a. If it is moved forward, pull the charging handle back. b. If the bolt is locked back, push the bolt catch. Recharge/Replace battery. Recharge/Replace battery. Stop firing promptly, and remove fed BBs from chamber. Semi Auto Feature not Functioning Full AUTO Firing Cycle Slowing down A Loud Noise while Operating Broken Charging Handle Low battery power Unsufficient contact Low battery power Worn or damaged gears by dry fire practice Charging handle is arranged improperly. Put it on proper position before shooting. Recharge/Replace battery. Take down the gun, and push the power-off switch. (Refer to Storage section on pg.3) Recharge/Replace battery. Never do dry firing. It may result in a malfunction. Replace changing handle. 11

SYMPTOMS CAUSE SOLUTIONS BBs Traveling not regularly Hop-Up is not adjusted. Inner barrel or Hop up bucking contaminated by oil/dirt. Worn or Damaged Hop-Up bucking Improper BBs Adjust hop-up by using included hop-up wrench. Remove them and clean the inner barrel routinely. Replace the bucking. Only use HARD BBs. Being Wet 1. Stop operation at once, and remove the battery. 2. Wipe off water inside/outside of the body and the battery. 3. After dry them completely, and have a shot. If it does not operate well, consult GBLS for repair. GBLS USA www.gblsusa.com Tel : +1 (631) 319-6496 COPYRIGHT(C) 2017 BY GBLS. ALL Rights RESERVED. 12