MATERIAL HANDLER NET HORSEPOWER 363 kw 487 HP @ 1800 rpm OPERATING WEIGHT 87796 89339 kg 193,555 196,955 lb REACH 16.8 20.7 m 55' 68' PC 800 LC Photos may include optional equipment MATERIAL HANDLER
M ATERIAL H ANDLER WALK AROUND The Komatsu PC Material Handling series is a full product line with solutions for all of your material handling needs. Komatsu...the unparalleled, one-stop shopping source for rugged and cutting edge material handling equipment! For Use In: Scrap Processing 4 Stockpiling of recycled materials 4 Transfer station material feeding Bulk Material Handling 4 Coal, coke, and ore 4 Sand and gravel 4 Grain Material Handling System Includes: Choice of 16.8 m 55' or 20.7 m 68' two-piece attachment with underslung hydraulic cylinders Plumbing for grapple operation Electrical cable for magnet operation Centralized lube plumbing Magnet connecting link Manual tilt cab riser Access platform with stairs and railings Front window guard Hydraulic control package provides functions to open, close, and rotate grapple. Includes control handles and switches in cab Hydraulic-driven 33 kw generator Generator controller (Hubbell) and magnet instrumentation mounted in the cab riser. Load power gauge with operating switches installed in operator s cab Parts, service, and operator s manuals Features: Long track provides excellent stability Optional guage widener improves stability and production capability Dual function machine, grapple or magnet operation Elevated cab for excellent all-around visibility Two-pump system provides smooth, fast, compound movements maximizing productivity Centralized lubrication points decrease service time TM KOMTRAX equipped machines can send location, SMR and operation maps to a secure website utilizing wireless technology. Machines also relay error codes, cautions, maintenance items, fuel levels, and much more. 2
M ATERIAL H ANDLER NET HORSEPOWER 363 kw 487 HP @ 1800 rpm Hydraulics Unique two-pump system provides smooth compound movement of the work equipment. Electronic Open-center Load Sensing System (EOLSS) controls all pumps for efficient engine power use. This system also reduces hydraulic loss during operation. OPERATING WEIGHT 87796 89339 kg 193,555 196,955 lb REACH 16.8 20.7 m 55' 68' Large Comfortable Cab Low noise and vibration with cab damper mounting. Environment-Friendly Clean Engine The gets its exceptional power and work capacity from a Komatsu SAA6D140E-5 engine. Net output is 363 kw 487 HP, providing increased hydraulic power and improved fuel efficiency. Komatsu s SAA6D140E-5 engine is EPA Tier 3 emissions certified. 3
M ATERIAL H ANDLER SPECIFICATIONS ENGINE Model............................... Komatsu SAA6D140E-5 Type..................... Water-cooled, 4-cycle, direct injection Aspiration............... Turbocharged, aftercooled, cooled EGR Number of cylinders...................................... 6 Bore........................................ 140 mm 5.51" Stroke...................................... 165 mm 6.50" Piston displacement.......................... 15.24 ltr 930 in 3 Governor......................... All-speed control, electronic Horsepower: SAE J1995.......................... Gross 370 kw 496 HP ISO 9249 / SAE J1349.................. Net 363 kw 487 HP Hydraulic fan at maximum speed.......... Net 338 kw 454 HP Rated rpm..................................... 1800 rpm Fan drive type.................................... Hydraulic EPA Tier 3 and EU stage 3A emissions certified. HYDRAULICS Type....... Electronic Open-center Load Sensing System (EOLSS) Number of selectable working modes........................ 3 Main pump: Type.................. Two (2) variable capacity piston pumps Pumps for......... Boom, arm, bucket, swing, and travel circuits Maximum flow........... 2 x 494 ltr/min 2 x 130.5 U.S. gal/min Fan drive pump.................... Variable capacity piston type Hydraulic motors: Travel............... 2 x axial piston motors with parking brake Swing.......... 2 x axial piston motors with swing holding brake Relief valve setting: Implement circuits............ 31.4 MPa 320 kg/cm 2 4,550 psi Travel circuit................. 34.3 MPa 350 kg/cm 2 4,980 psi Swing circuit................. 28.4 MPa 290 kg/cm 2 4,120 psi Heavy lift circuit.............. 34.3 MPa 350 kg/cm 2 4,980 psi Pilot circuit................... 2.9 MPa 30 kg/cm 2 430 psi Hydraulic cylinders: (Number of cylinders bore x stroke x rod diameter) Boom.......... 2 202 mm x 1727 mm x 127 mm 8" x 68" x 5" Arm... (55' front) 1 229 mm x 1829 mm x 152 mm 9" x 72" x 6" (68' front) 1 216 mm x 1829 mm x 152 mm 8.5" x 72" x 6" SWING SYSTEM Drive method............................ Hydraulic motors (2) Swing reduction.............................. Planetary gear Swing circle lubrication......................... Grease-bathed Swing lock.................................... Oil disc brake Swing speed....................................... 6.8 rpm Swing torque...................... 28968 kg m 209,461 ft. lbs. UNDERCARRIAGE Center frame................................... H-leg frame Track frame.................................... Box-section Track type......................................... Sealed Track adjuster.................................... Hydraulic Number of shoes............................... 51 each side Number of carrier rollers.......................... 3 each side Number of track rollers........................... 9 each side COOLANT AND LUBRICANT CAPACITY (REFILLING) Fuel tank............................... 980 ltr 258.9 US gal Radiator................................. 100 ltr 26.4 US gal Engine................................... 58 ltr 15.3 US gal Final drive, each side......................... 20 ltr 5.3 US gal Swing drive......................... 2 x 24.5 ltr 2 x 6.5 US gal Hydraulic tank........................... 440 ltr 116.2 US gal OPERATING WEIGHT (APPROXIMATE) Operating weight w/o Grapple: 16.8 m 55'............................ 87796 kg 193,555 lb 20.7 m 68'............................ 89339 kg 196,955 lb DRIVES AND BRAKES Steering control........................ Two levers with pedals Drive method............................... Fully hydrostatic Travel motors................ Axial piston motors, in-shoe design Reduction system................... Planetary double reduction Maximum drawbar pull.............. 559 kn 57000 kg 125,660 lb Gradeability.......................................... 70% Maximum travel speed: High................. 4.2 km/h 2.6 mph Low.................. 2.8 km/h 1.7 mph Service brake................................. Hydraulic lock Parking brake................................. Oil disc brake 4
M ATERIAL H ANDLER SHIPPING WEIGHTS AND DIMENSIONS (APPROXIMATE) Upper Structure 2-Piece Front Height Length Description A Overall length B Overall height Weight (Includes guage widener) Undercarriage (LC) C D Description C Length of track on ground D Length of track Track gauge (Std) Track gauge (Opt-widened) Overall width (Std): Extended Retracted Overall width (Opt-widened): Extended Retracted Weight (Per side) Dimensions 6299 mm 20'8" 3023 mm 9'11" 33600 kg 74,000 lbs 1445 mm 4'9" 1380 mm 4'6" Dimensions 5020 mm 16'6" 6330 mm 20'9" 3500 mm 11'6" 4267 mm 14'0" 4623 mm 15'2" 4064 mm 13'4" 5385 mm 17'8" 4826 mm 15'10" 13600 kg 30,000 lb Model K02US55 PC800-8 K02US68 PC800-8 16.8 m 55' front 20.7 m 68' front Description Boom Stick Boom Stick Length mm 9398 7975 11684 9296 ft in 30'10" 26'2" 38'4" 30'6" Width mm 1321 559 1372 686 ft in 4'4" 1'10" 4'6" 2'3" Height mm 1448 1473 1524 1626 ft in 4'9" 4'10" 5'0" 5'4" Weight kg 7394 3311 8324 5806 lb 16,300 7,300 18,350 12,800 Arm Cylinder Group Length Height Description 2-Piece Front 55' 2-Piece Front 68' Length mm 3023 3023 ft in 9'11" 9'11" Width mm 559 559 ft in 1'10" 1'10" Height mm 305 305 ft in 1'0" 1'0" Weight kg 987 932 lb 2,175 2,054 Bore mm 229 216 ft in 9.0" 8.5" Boom Cylinders Others 950 mm 3'1" 13600 kg 29,975 lb 1900 mm 6'3" 3195 mm 10'6" 500 mm 1'8" 1540 mm 5'1" 1790 mm 5'10" 1790 mm 5'10" 72 kg 159 lb 3200 mm 10'6" 70 mm 2.8" 500 mm 1'8" Grapple Length mm 2896 ft in 9'6" Width mm 305 ft in 1'0" Height mm 305 ft in 1'0" Weight kg 590 ea. x 2 lb 1,300 ea. x 2 29 kg 64 lb 50 kg 110 lb Height Platform, Ladder, and Railing Description 1981 mm 78" (6'6") Riser Dimensions L x W x H mm ft in 1845 x 1245 x 1168 6'1" x 4'1" x 3'10" Weight kg lb 200 440 Length Height Length Description Model LO300C Model LO400C Dimensions L x W x H L x W x H mm 3505 x 2134 x 2134 3658 x 2438 x 2438 ft in 11'6" x 7'0" x 7'0" 12'0" x 8'0" x 8'0" Weight kg 3629 3719 lb 8,000 8,200 5
M ATERIAL H ANDLER LIFTING CAPACITIES LIFTING CAPACITY A: Reach from swing center B: Stick tip height C: Lifting capacity Cf: Rating over front Cs: Rating over side Conditions: (In addition to base machine) 2-piece front attachment with hydraulic cylinders 1981 mm 78" manual tilt cab riser with platform, stairs, and handrails Front window guard Hydraulic plumbing and control package for grapple operation Carbody widened 762 mm 30" raised 102 mm 4" 4,400 psi working pressure 4267 mm 168" gauge 1110 mm 44" track shoes 229 mm 9.0" bore arm cylinder Young 2-Piece Front - 16.8 m 55' (K02US55-) Unit: kg lb A 3.0 m 10' 4.6 m 15' 6.1 m 20' 7.6 m 25' 9.1 m 30' 10.7 m 35' 12.2 m 40' 13.7 m 45' 15.2 m 50' 16.8 m 55' B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs 18.3 m 60' 16.8 m *9400 *9400 55' *20,800 *20,800 15.2 m *11900 *11900 *9500 *9500 50' *26,200 *26,200 *21,000 *21,000 13.7 m *11400 *11400 *8900 *8900 45' *25,100 *25,100 *19,700 *19,700 12.2 m *12300 *12300 *10800 *10800 *7600 *7600 40' *27,200 *27,200 *23,900 *23,900 *16,700 *16,700 10.7 m *23500 *23500 *13100 *13100 *12000 *12000 *9800 *9800 35' *51,800 *51,800 *28,800 *28,800 *26,400 *26,400 *21,700 *21,700 9.1 m *13900 *13900 *12800 *12800 *11200 *11200 *7700 *7700 0 30' *30,600 *30,600 *28,300 *28,300 *24,800 *24,800 *17,000 *17,000 7.6 m *14800 *14800 *14300 *14300 *13100 *13100 *12000 *12000 *9400 *9400 0 25' *32,700 *32,700 *31,600 *31,600 *28,800 *28,800 *26,400 *26,400 *20,800 *20,800 6.1 m *15500 *15500 *16700 *16700 *14900 *14900 *13400 *13400 *12100 *12100 0 *10700 *10700 20' *34,100 *34,100 *36,900 *36,900 *32,800 *32,800 *29,500 *29,500 *26,700 *26,700 *23,600 *23,600 4.6 m *17900 *17900 *20300 *20300 *17700 *17700 *15500 *15500 *13700 *13700 0 *12300 *12300 *11000 *11000 *6000 *6000 15' *39,500 *39,500 *44,700 *44,700 *39,000 *39,000 *34,100 *34,100 *30,200 *30,200 *27,100 *27,100 *24,200 *24,200 *13,300 *13,300 3.0 m *28200 *28200 *22400 22400 *18600 18600 *16000 *16000 *14000 *14000 *12400 *12400 *10900 *10900 *6700 *6700 10' *62,200 *62,200 *49,300 *49,300 *41,100 *41,100 *35,200 *35,200 *30,800 *30,800 *27,300 *27,300 *24,000 *24,000 *14,800 *14,800 1.5 m *30100 *30100 *23500 *23500 *19300 19300 *16300 *16300 *14100 *14100 *12300 *12300 *10700 *10700 *6600 *6600 5' *66,400 *66,400 *51,800 *51,800 *42,500 *42,500 *36,000 *36,000 *31,100 *31,100 *27,200 *27,200 *23,500 *23,500 *14,500 *14,500 0.0 m *5400 *5400 *17200 *17200 *23900 *23900 *19500 *19500 *16400 *16400 *14000 *14000 *12100 *12100 *10200 *10200 00 0' *11,900 *11,900 *38,000 *38,000 *52,600 *52,600 *42,900 *42,900 *36,100 *36,100 *30,900 *30,900 *26,600 *26,600 *22,500 *22,500-1.5 m *6400 *6400 *14300 *14300 *23400 *23400 *19100 *19100 *16000 *16000 *13600 *13600 *11500 *11500 *9400 *9400 5' *14,200 *14,200 *31,500 *31,500 *51,500 *51,500 *42,100 *42,100 *35,300 *35,300 *29,900 *29,900 *25,300 *25,300 *20,700 *20,700 3.0 m *8100 *8100 *14600 *14600 *21900 *21900 *18100 *18100 *15100 *15100 *12700 *12700 *10400 *10400 10' *17,800 *17,800 *32,100 *32,100 *48,300 *48,300 *39,800 *39,800 *33,200 *33,200 *27,900 *27,900 *23,000 *23,000 4.6 m *23500 *23500 *16000 *16000 *19500 *19500 *16100 *16100 *13400 *13400 *11100 *11100 *32550 *32550 15' *51,800 *51,800 *35,200 *35,200 *42,900 *42,900 *35,600 *35,600 *29,600 *29,600 *24,400 *24,400 1 Note: Capacities are measured at the bare stick tip. Capacities marked with an asterisk (*) are limited by hydraulic capacities rather than stabilities. 1. Lifting capacities shown do not exceed 75% of minimum tipping loads or 87% of hydraulic capacities. Data supplied by AEM. 2. Lifting capacities shown should not be exceeded. Weight of all lifting accessories must be considered part of the load. 3. Lifting capacities assume the machine is standing level on a firm, uniform supporting surface. The user must make allowances for unfavorable job conditions such as soft or uneven ground or sudden stopping of loads. 4. The least stable position is over the side. 5. The operator should be fully acquainted with the Operation Manual before operating the machine. 6. Capacities apply only to the machine equipped as stated here. 7. Capacities are based on PCSA gross rated loads. 6
LIFTING CAPACITY A: Reach from swing center B: Stick tip height C: Lifting capacity Cf: Rating over front Cs: Rating over side Conditions: (In addition to base machine) 2-piece front attachment with hydraulic cylinders 1981 mm 78" manual tilt cab riser with platform, stairs, and handrails Front window guard Hydraulic plumbing and control package for grapple operation Carbody widened 762 mm 30" raised 102 mm 4" 4,550 psi working pressure 4267 mm 168" gauge 1110 mm 44" track shoes 216 mm 8.5" bore arm cylinder Young 2-Piece Front - 20.7 m 68' (K02US68-) A 4.6 m 15' 6.1 m 20' 7.6 m 25' 9.1 m 30' 10.7 m 35' 12.2 m 40' 13.7 m 45' 15.2 m 50' 16.8 m 55' 18.3 m 60' 19.8 m 65' B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs 21.3 m *23500 *23500 *9800 *9800 *32550 *32550 70' *51,800 *51,800 *21,700 *21,700 19.8 m *23500 *23500 *10200 *10200 *32550 *32550 65' *51,800 *51,800 *22,500 *22,500 18.3 m *10000 *10000 *7400 *7400 60' *22,100 *22,100 *16,300 *16,300 16.8 m *11000 *11000 *9700 *9700 *7000 *7000 55' *24,300 *24,300 *21,300 *21,300 *15,400 *15,400 15.2 m *11400 *11400 *10600 *10600 *9100 *9100 50' *25,100 *25,100 *23,400 *23,400 *20,100 *20,100 13.7 m *11300 *11300 *10500 *10500 *9800 *9800 *8300 *8300 45' *25,000 *25,000 *23,200 *23,200 *21,600 *21,600 *18,200 *18,200 12.2 m *11400 *11400 *10500 *10500 *9800 *9800 *9100 *9100 *6600 *6600 40' *25,100 *25,100 *23,200 *23,200 *21,600 *21,600 *20,100 *20,100 *14,600 *14,600 10.7 m *23500 *23500 *11600 *11600 *10700 *10700 *9800 *9800 *9100 *9100 *8300 *8300 0 35' *51,800 *51,800 *25,500 *25,500 *23,500 *23,500 *21,700 *21,700 *20,100 *20,100 *18,300 *18,300 9.1 m *13000 *13000 *11800 *11800 *10800 *10800 *9900 *9900 *9200 *9200 *8400 *8400 *5500 *5500 30' *28,700 *28,700 *26,100 *26,100 *23,800 *23,800 *21,900 *21,900 *20,200 *20,200 *18,600 *18,600 *12,200 *12,200 7.6 m *13500 *13500 *12200 *12200 *11000 *11000 *10100 *10100 *9200 *9200 *8500 *8500 *7100 *7100 25' *29,800 *29,800 *26,800 *26,800 *24,300 *24,300 *22,200 *22,200 *20,300 *20,300 *18,700 *18,700 *15,600 *15,600 6.1 m *14000 *14000 *16100 *16100 *14100 *14100 *12500 *12500 *11200 *11200 *10200 *10200 0 *9300 9300 *8500 8400 *7600 7300 20' *30,800 *30,800 *35,500 *35,500 *31,100 *31,100 *27,600 *27,600 *24,800 *24,800 *22,500 *22,500 *20,500 *20,500 *18,700 18,600 *16,800 16,100 4.6 m *18900 *18900 *20400 *20400 *17000 *17000 *14700 *14700 *12900 *12900 *11500 *11500 *10300 *10300 *9300 *9300 *8400 8300 *7500 7200 15' *41,600 *41,600 *44,900 *44,900 *37,500 *37,500 *32,300 *32,300 *28,400 *28,400 *25,300 *25,300 *22,800 *22,800 *20,600 *20,600 *18,600 18,300 *16,600 15,900 3.0 m *27600 *27600 *21600 *21600 *17800 *17800 *15100 *15100 *13200 *13200 *11700 *11700 *10400 *10400 *9300 9300 *8300 8200 *7300 7100 10' *60,900 *60,900 *47,700 *47,700 *39,200 *39,200 *33,400 *33,400 *29,100 29,100 *25,700 *25,700 *22,900 *22,900 *20,600 20,600 *18,400 18,000 *16,200 15,700 1.5 m *8400 *8400 *22500 *22500 *18300 *18300 *15500 *15500 *13400 *13400 *11700 *11700 *10400 *10400 *9300 9100 *8200 8000 *7100 7000 5' *18,600 *18,600 *49,500 *49,500 *40,400 *40,400 *34,100 *34,100 *29,500 *29,500 *25,900 *25,900 *22,900 *22,900 *20,400 20,100 *18,100 17,600 *15,700 15,500 0.0 m *5900 *5900 *17000 *17000 *18500 *18500 *15600 *15600 *13400 *13400 *11700 *11700 *10300 10300 *9100 8900 *8000 7800 *6700 *6700 0' *12,900 *12,900 *37,400 *37,400 *40,700 *40,700 *34,300 *34,300 *29,500 *29,500 *25,800 *25,800 *22,700 22,600 *20,000 19,700 *17,600 17,300 *14,800 *14,800-1.5 m *2500 *2500 *5800 *5800 *12700 *12700 *18200 *18200 *15300 *15300 *13200 *13200 *11500 *11500 *10000 10000 *8800 *8800 *7600 *7600 *6100 *6100 5' *5,600 *5,600 *12,800 *12,800 *28,100 *28,100 *40,100 *40,100 *33,800 *33,800 *29,100 *29,100 *25,300 *25,300 *22,100 22,100 *19,400 19,300 *16,700 *16,700 *13,500 *13,500 3.0 m *3800 *3800 *6500 *6500 *11900 *11900 *17500 *17500 *14800 *14800 *12700 *12700 *11000 *11000 *9600 *9600 *8300 *8300 *6900 *6900 10' *8,300 *8,300 *14,400 *14,400 *26,300 *26,300 *38,500 *38,500 *32,600 *32,600 *28,000 *28,000 *24,300 *24,300 *21,100 *21,100 *18,200 *18,200 *15,300 *15,300 4.6 m *7600 *7600 *12300 *12300 *16200 *16200 *13900 *13900 *11900 *11900 *10300 *10300 *8800 *8800 *7500 *7500 *6000 *6000 *32550 15' *16,800 *16,800 *27,100 *27,100 *35,800 *35,800 *30,600 *30,600 *26,300 *26,300 *22,700 *22,700 *19,500 *19,500 *16,500 *16,500 *13,200 *13,200 6.1 m *13200 *13200 *14500 *14500 *12500 *12500 *10800 *10800 *9200 *9200 *7800 *7800 20' *29,200 *29,200 *31,900 *31,900 *27,500 *27,500 *23,700 *23,700 *20,300 *20,300 *17,200 *17,200 Note: Capacities are measured at the bare stick tip. Capacities marked with an asterisk (*) are limited by hydraulic capacities rather than stabilities. Unit: kg lb 1. Lifting capacities shown do not exceed 75% of minimum tipping loads or 87% of hydraulic capacities. Data supplied by AEM. 2. Lifting capacities shown should not be exceeded. Weight of all lifting accessories must be considered part of the load. 3. Lifting capacities assume the machine is standing level on a firm, uniform supporting surface. The user must make allowances for unfavorable job conditions such as soft or uneven ground or sudden stopping of loads. 4. The least stable position is over the side. 5. The operator should be fully acquainted with the Operation Manual before operating the machine. 6. Capacities apply only to the machine equipped as stated here. 7. Capacities are based on PCSA gross rated loads. 7
M ATERIAL H ANDLER WORKING RANGES Young 2-Piece Front 16.8 m 55' (KO2US55-) Maximum Height 18.4 m 60'6" Maximum Reach 16.8 m 55.0' 60 65 60 55 55 50 45 40 35 Reach (ft.) 30 25 20 15 10 5 0 50 45 40 35 30 Height (ft.) 25 20 15 10 5 0-5 -10-15 -20-25 Young 2-Piece Front 20.7 m 68' (KO2US68-) 70 75 65 60 55 50 45 Reach (ft.) 40 35 30 35 20 15 10 5 Maximum Height 22.2 m 72'10" Maximum Reach 20.7 m 68.0' 70 65 60 55 50 45 40 35 Height (ft.) 30 25 20 15 10 5 0-5 -10-15 -20-25 8
ATTACHMENTS M ATERIAL H ANDLER Grapple Selection Guide Komatsu Model Recommended Young Grapple Model LO400C LO300C 16.8 m 55' front 20.7 m 68' front Size m 3 3.06 2.29 yd 3 4.0 3.0 Weight kg 3719 3629 lb 8,200 8,000 A mm 3505 3200 in 138 126 B mm 2946 2896 in 116 114 C mm 3658 3480 in 144 137 D mm 2388 2184 in 94 86 Typical 5-Tine Grapple (Orange Peel) 1. Grapple Tines 2. Grapple Cylinders 3. Mounting Pin Grapple Applications: Select a grapple whose weight including material does not exceed the lift capacity shown for your specific machine. Note: Conditions and material densities vary. Confirm your specific load density before determining machine balance. General Material Weights: 1. Steel scrap, clippings compressed or bundled weigh approximately 919 kg 2,025 lbs per yd 3. 2. Shredded steel scraps, unprepared, weigh approximately 612 kg 1,350 lbs per yd 3. General Magnet Selection Guide T = Typical Magnet Size M = Maximum Generator KW Rating Approximate Magnet Operating Weight Lifting Capacity Diameter Cold Amps A B C in mm Max. 10 15 20 25 33 kg lb kg lb kg lb kg lb 40 1016 30 T 816 1,800 408 900 272 600 170 375 45 1143 39 M 1270 2,800 816 1,800 499 1,100 283 625 48 1219 58 T 1315 2,900 794 1,750 526 1,160 272 600 57 1447 58 M 1860 4,100 1225 2,700 805 1,775 385 850 57 1447 80 T 1996 4,400 1225 2,700 816 1,800 385 850 66 1676 80 M 2812 6,200 1860 4,100 1247 2,750 612 1,350 66 1676 100 T 2903 6,400 1860 4,100 1247 2,750 612 1,350 72 1828 103 M 3719 8,200 2132 4,700 1429 3,150 680 1,500 72 1828 132 T 3765 8,300 2132 4,700 1429 3,150 680 1,500 78 1981 132 M 4445 9,800 2585 5,700 1776 3,915 844 1,860 Magnet Selection: 1. Select a magnet whose weight, including lifted material, does not exceed the lift capacity shown for your specific machine. 2. Select a magnet with a cold amp rating equal to or less than the figures shown in this chart. Legend: A: Pig iron and #1 hot melt; refers in general to low iron content slag or slabs. B: #2 broken; scrap steel or cut offs. C: Steel turnings; scrap from machining processes. 9
STANDARD EQUIPMENT ENGINE AND RELATED ITEMS: Air cleaner, double element, dry type Engine, Komatsu SAA6D140E-5 Fuel pre-filter (10 micron) with water separator Fuel primary filter (2 micron) Variable speed cooling fan, hydraulic drive, reversible ELECTRICAL SYSTEM: Alternator, 75 amp, 24 V Auto decelerator Batteries, 220 Ah, 2 x 12 V Horn, electric Interconnected horn and warning light Power supply, 12V Starting motor, 11kW Step light with timer Working lights-2 boom, 2 cab top front, 1 cab bottom UNDERCARRIAGE: 810 mm 32'' double grouser 9 track/3 carrier rollers (each side) Hydraulic track adjusters (each side) Sealed track Variable track gauge GUARDS AND COVERS: Dust-proof net for radiator and oil cooler Engine thermal guards and fan guard Pump/engine room partition Revolving frame undercover Track frame center undercover Travel motor guards OPERATOR ENVIRONMENT: Automatic air conditioner/heater/defroster system Damper mount, all-weather, soundsuppressed cab with tinted glass windows, lockable door, intermittent window wiper and washer, floormat, cigarette lighter and ashtray Multi-function color monitor, electronically-controlled throttle dial, electric service meter, gauges (coolant temperature, hydraulic oil temperature and fuel level), caution lights (electric charge, engine oil pressure, and air cleaner clogging), indicator lights (engine preheating and swing lock), level check lights (coolant, engine oil, and hydraulic oil), EMMS self-diagnostic system with trouble data memory Pull-up type front window, lockable Radio, AM-FM Rearview mirrors, right and left Seat, fully adjustable with suspension Seat belt 78 mm 3" wide non-cinching HYDRAULICS: Control levers, wrist control levers for arm, boom, bucket, and swing with PPC system Control levers and pedals for steering and travel with PPC system Fully hydraulic, with Electronic Open- Center Load-Sensing (EOLSS) and engine speed sensing (pump and engine mutual control system) Heavy lift mode system In-line high-pressure filters Oil cooler One axial piston motor per track for travel with counter balance valve Shockless boom control Swing priority selection system Two-mode setting for boom Two axial piston motors for swing with single-stage relief valve Two control valves, 5+4 spools (boom, arm, bucket, swing, and travel) Two variable capacity piston main pumps Working modes (Power & Economy w/4 settings) DRIVE AND BRAKE SYSTEM: Brakes, hydraulic lock travel brakes, oil disc parking Hydrostatic two travel speed system with planetary final drive OTHER STANDARD EQUIPMENT: Automatic swing holding brake Catwalk Corrosion resistor Counterweight, 13600 kg 29,975 lb Grease gun, electric pump w/indicator KOMTRAX Large handrails Lift capacity chart Marks and plates, English One-touch engine oil drainage Paint, Komatsu standard PM tune-up service connector Slip-resistant plates Travel alarm OPTIONAL EQUIPMENT Front 16.8 m 55' 2-piece MH 20.7 m 68' 2-piece MH Cab front full guard Cab riser 1981 mm 78" manual tilt Front Guard Level 2* Grapples 2.29 m 3 3.0 yd 3 orange peel 3.06 m 3 4.0 yd 3 orange peel 33 kw hydraulic drive generator (requires 1981 mm 78" riser) Revolving frame undercover (HD) Top Guard Level 2* Track roller guards (full length) Track frame undercover UNDERCARRIAGE: 1010 mm 40'' double grouser 1110 mm 44'' double grouser Widened carbody (762 mm 30") * Check local regulations or requirements for Front Guard or Top Guard AESS739-01 2007 Komatsu America Corp. Printed in USA D8(1M)C 8/07 (EV-1) www.komatsuamerica.com Komatsu America Corp. is an authorized licensee of Komatsu Ltd. Materials and specifications are subject to change without notice is a registered trademark of Komatsu Ltd., Japan KOMTRAX TM is a trademark of Komatsu America Corp.