Secured Door w/ Electric Lock - Solenoid Solution family: Interior Door solution Solution group: Single-Wood-Self Closing- Access Control Description The ASSA ABLOY Belgium solution for secured interior doors with an electromechanical Solenoid Lock for medium traffic. Equipped with a controlled handle one side and a panic handle for free exit on the other side. The lock/door is automatically deadlocked as soon as the door is closed. The lock can be controlled by a variety of electrical impulse generating equipment, i.e. card reader, keypad and timer, push buttons,... Typical application markets Commercial, Healthcare, Offices and Transport. Hardware Set Cylinder (Euro Profile, half), MP83, by Litto, Standard: EN 1303 Lever Handles, Architectural Hardware, by Litto, Standard : EN 1906 Door Closer, Cam-Motion, by ASSA ABLOY, Standard : EN 1154, DDA/CEN PR 15894, EN 15804 (EPD-ASA-20130275- IBC1-EN) Escutcheon (rose for cylinder, half), Architectural Hardware, by Litto Door Stop, Architectural Hardware, by Litto Hinges, Architectural Hardware, by Litto, Standard : EN 1935 Electric Lock, Solenoid, by ABLOY, Standard : EN 12209, SKG**, EN 179, EN 1125, EN 14846,BENOR ATG RF30/60 Spindle (split), by Litto Lead Cover, Architectural Hardware, by Litto Back Front ASSA ABLOY Belgium http://www.assaabloy.be Set ID: D-S-1-Solenoid- BE06 Tel: +32(0)22477911 Version:1
1 Product Information Door closer with Cam-Motion technology and height-adjustable guide rail G195 or standard guide rail G193 Fulfils barrier-free building requirements (DDA / CEN TR 15894) Certified in compliance with EN 1154, size 1-4 Suitable for fire and smoke protection doors For single action doors up to 1100 mm wide Can be used in four installation types: hinge and non-hinge sides in standard and frame installation Capability characteristics Door closer with Cam-Motion technology and height-adjustable guide rail G195 or standard guide rail G193 Can be used with integrated concealed mounting plate, suitable for fire and smoke protection doors Can be used for left and right-handed doors Axis continuously height adjustable up to 14 mm Closing speed, latching speed and backcheck adjustable via front facing regulating valves Thermodynamic valves for consistent performance Variable adjustable closing force Opening angle up to 170 Effective backcheck and latching speed range adjustable Large range of applications Standard colours: silver EV1; white, similar to RAL9016; brown, similar to RAL8014; black, similar to RAL9005, stainless steel Customised finishes available on request Characteristics for guide rail G195 Height-adjustable by 2 mm for tolerance Concealed fastening screws Characteristics of standard guide rail G193 Without protective cover Visible fastening screws Technical data Variable adjustable closing force EN 1-4 Door width up to 1100 mm Fire and smoke protection Yes DIN door swing directions left / right handed Mounting method Standard and frame installation installation Closing speed Variable between 170-10 170-10 Latching speed Variable between 10-0 Backcheck Variable above 75 Opening angle hinge side ca. 170 Opening angle non-hinge side ca. 120 Weight 2.7 kg Height 64 mm Depth 57 mm Width 270 mm Certified in compliance with EN 1154 1 Page of 8
2 Product Information CE marking for building products Yes 2 Page of 8
3 Product Information view construction Space required on doors for standard installation on hinge side Left handed shown in diagram Right handed is the reverse Installation dimensions for direct standard mounting on hinge side Left handed shown in diagram Right handed is the reverse Installation dimensions with mounting plate for standard mounting on hinge side In compliance with EN 1154, Supplement 1, or for doors where direct mounting is not possible. Left handed shown in diagram Right handed is the reverse 3 Page of 8
4 Product Information Installation dimensions for direct frame mounting on hinge side Closer on hinge side of door frame. Left handed shown in diagram Right handed is the reverse Installation dimensions with mounting plate for frame mounting on hinge side Closer on hinge side of door frame. For doors where direct mounting is not possible. Left handed shown in diagram Right handed is the reverse Installation dimensions for direct standard mounting non hinge side Right handed door shown in diagram Left handed door is the reverse 4 Page of 8
5 Product Information Installation dimensions with mounting plate for standard mounting non hinge side For doors where direct mounting is not possible Right handed door shown in diagram Left handed door is the reverse Installation dimensions when mounted directly onto the frame non-hinge side Closer on non-hinge side of door frame Right handed door shown in diagram Left handed door is the reverse Installation dimensions with mounting plate for frame mounting non-hinge side Closer on non-hinge side of door frame. For doors where direct mounting is not possible. Right handed door shown in diagram Left handed door is the reverse 5 Page of 8
6 Product Information Mounting plate A120 For mounting with drilling template acc. to EN 1154 Supplement 1 and for universal use Mounting plate A130 For guide rail G193 and G195 Angle bracket A104 Only for standard guide rail G193 6 Page of 8
7 Product Information Glass door shoe A166 For mounting the door closer on the all-glass door leaf. Stainless steel full cover For DC500 and DC700 Stainless steel design cover For DC500 and DC700 7 Page of 8
Powered by TCPDF (www.tcpdf.org) 8 Product Information Hold-open device A152 (Cannot be used with fire and smoke protection doors) Mechanical hold-open device for doors which sometimes need to be secured in the open position. Simple fitting into guide rail G193 and G195. Hold-open angle max. 130 Adjustable hold-open force Not approved for use on fire and smoke protection doors. Opening damper A153 Helps to prevent the door and door handle from hitting a return wall. Simple fitting into guide rail. Opening damper continuously adjustable up to an opening angle of max. 130. Does not replace a door stop. 8 Page of 8
Powered by TCPDF (www.tcpdf.org) 1 Product Information Half euro- profile cylinder K44EL- K45EL- E Capability characteristics Litto MP83 Cylinder contains 5 vertical pins in nickel silver with springs in phosphor bronze in each cylinder core An additional combination of max.imum 5 springs and cams makes a lateral locking bar block or not Anti-drilling protection in cylinder body and cylinder core by 2 hardened steel pins per side Outher counter pins in hardened steel to protect the key way The specific shape of the cut of the key in the upper rib of the key offers a large number of possible combinations and a high security level against the forging of the key 3-zonal nickel silver keys with constant overlapping of the central base profile and lateral exceeding variable longitudinal ribs, provide a high level of security against the technical and unheard copying of keys Cylinders and keys numbered and reorders only available on presentation of the safety certificate Patented key and cylinder system until 2028 EN1303 normalized Technical data Type Base length Cylinder housing Standard finishing Other finishing Standard delivered KA or KD MKS Optional RFID key Extensions Half euro-profile cylinder L=30/10 mm brass MS58 matt nickel-plated polished brass with 3 keys yes yes yes adjustable in 5mm increments per side up to 130mm max. length length Litto 1 Page of 1
Powered by TCPDF (www.tcpdf.org) 1 Product Information Pair of round cylinder escutcheons TL0151SS Capability characteristics The handles are tested compliant to EN1906 and therefore meet the following requirements: Catogory of use 3 : normal rate for doors used with care Durability 7 : 200.000 cylcic Resistance to corrosion 3 ( high degree of corrosion resistance) Use type B : under-construction secured by ciclips Authorized use on fire doors 1 Certificate for secure applications 1 (the handle does not break) Minimum tube thickness is 1.2mm The results are tested SKG. Technical data Finish Rose dimension Sub-construction roses Fixing AISI 304 quality stainless steel, finely brushed Ø 53x6,5mm with invisible fixing In stainless steel with 2 hexagonal fixing holes With through fixing Article number TL0151SS Handles on round roses and functional roses 1 Page of 1
Powered by TCPDF (www.tcpdf.org) 1 Product Information ½ moon floor door stop TL0701SS Technical data Dimension Finish Fixing Ø 56x48x18mm, rubber 8mm AISI 304 quality stainless steel, finely brushed Visible, M8 plug en M8x60 screw Article number TL0701SS Architectural Hardware 1 Page of 1
Powered by TCPDF (www.tcpdf.org) 1 Product Information Hinges TL1102LSS The doors are suspended with hinges in stainless steel 18/10, brushed and polished, with flat ended. The hinge in open position has the dimensions of 106 mm (heigh) and 88 mm (open width) The spindle with a diameter of 10 mm is also in stainless steel. The blades with dimensions 100 mm ( heigh) on 36 mm ( width from knob) on 3 mm (depth), are rounded and each fitted with 4 milled screw holes. The upper and lower caps of 3 mm, are bar-turned and perfectly cylindrical. Capability characteristics Hinges For wooden door and frame EN 1935 Classe 10 Ring 6mm Rounded corners Technical data Dimensions Blade width Blade thickness Spindle Direction Screw holes Cap SKG tested Finish Open: 100 mm x 88 mm 36 mm from the knot 3 mm Ø 10mm Left / Right 4 milled screw holes 3 mm Yes Stainless steel, brushed and polished Article number TL1102LSS Belgium 1 Page of 1
Powered by TCPDF (www.tcpdf.org) 1 Product Information Pair of handles TL3106SS Capability characteristics The handles are tested compliant to EN1906 and therefore meet the following requirements: Catogory of use 3 : normal rate for doors used with care Durability 7 : 200.000 cylcic Resistance to corrosion 3 ( high degree of corrosion resistance) Use type B : under-construction secured by ciclips Authorized use on fire doors 1 Certificate for secure applications 1 (the handle does not break) Minimum tube thickness is 1.2mm The results are tested SKG. Technical data Finish AISI 304 quality stainless steel, finely brushed Handle dimension Ø 19x140x66mm Rose dimension Ø 53x6,5mm with invisible fixing EN classification Compliant with EN1906 standard, class 3 Stainless steel tube thickness 1,2mm Sub-construction roses In stainless steel with 2 hexagonal fixing holes Fixing HESO square spindle 8mm with self-boring M6 Allen screw, with through fixing with through fixing Fitting Handle fastened to the sub-construction with a circlips Return spring With strenghtened return spring Article number TL3106SS Handles on round roses and functional roses 1 Page of 1