Industry Standard for Reliability. Durability. Exclusive Features. Heavy-Duty Construction

CATALOG SPEC SHEET 131-1 11 Section: 131 1 Effective: January March9 Replaces: March October Industry Standard for Reliability High-strength, low maintenance line of innovative process pumps Designed specifically for the toughest, most extreme environments Sets the industry standard for highquality and durability Durability Lowest shaft stiffness ratio (L 3 /D ) in the process industry: Frame S (1.9) Frame LD17 17 (.5) Frame M 19 (.7) Exclusive Features Designed around the seal and bearings where 9% of failures occur Designed to maximize system reliability stronger, more vibration-resistant pump Heavy-duty, solid, low deflection shaft prevents common vibration damage and greater stability at the seal area to improve seal life Heavy-duty bearings offer greater load capacity and extend bearing life Patented System One Labyrinth Seals provide non-wearing lifetime protection for radial and thrust bearings Heavy-Duty Construction Heavy-duty shaft, bearings, seals and housing design means this pump is built for reliability in the most extreme environments Offers the widest window of operation off the BEP of any conventional centrifugal pump www.blackmer.com Blackmer 19 Century Avenue SW, Grand Rapids, MI 953-153 USA T 1.1.111 F 1.1.375 www.blackmer.com

System One Heavy-Duty Process Pump 5 Catalog Index Page System One Heavy-Duty Process Pumps - Advantages 3- System One Heavy-Duty Process Pumps - Product line 7 Frame S/SD Group I (ANSI/ASME) (DIN/ISO) Construction Dimensions 9 Design Data 1 Pump Assembly and Parts List, Horizontal "/" 11- Auxiliary Pipe Connections 13 Composite Pump Curves: 1 cycle 15-5 cycle 7- Frame LD17 and A Group II (ANSI/ASME/IPP) Construction 5- Dimensions 7- Design Data 9-5 Pump Assembly and Parts List 51-5 Auxiliary Pipe Connections 53 Composite Pump Curves: 5 cycle 55-5 5 cycle -11 Frame M Group III (ASME/ANSI/Metric) Construction 117 Dimensions 11 Design Data 119 Pump Assembly and Parts List Auxiliary Pipe Connections 1 Composite Pump Curves: cycle 3-13 5 cycle 131-13 Vortex Solids Handling, Recessed Impeller Construction 139 Dimensions 1 Design Data 11 Pump Assembly and Parts List -13 Auxiliary Pipe Connections 1 Composite Pump Curves: 15 cycle 1-151 5 cycle 15-157 Pump Improvement Program Power End Upgrades Page System One Heavy-Duty Power End 15-1 Upgrade Advantages System One Heavy-Duty Process Pump Accessories Baseplates 11 SpiralTrac 1 Bushings Advantages -13 SpiralTrac Environmental Controller 1 & Throat Bushing Selection Chart Accessories Oil Temperature Monitors, 15 Cooling Coil Casing Heating Jackets 1 Engineering Data Materials of Construction 17 Interchangeability 1 System One Pump Pressure/Temperature Limits 19-17 Pump Dimensions for Mechanical Seal Installation 175 General Pump Specification Centrifugal Pump Specification for 17-1 Horizontal End Suction Pumps 1 SpiralTrac is a registered trademark of the manufacturer, EnviroSeal Engineering Products Ltd.,Waverly, Nova Scotia CERTIFIED I S O 9 1 blackops: Blackmer Optimum Pump Solutions blackops is a selection software program created specifically for Blackmer s System One centrifugal and positive displacement pump lines. The program allows you to print (or save) your pump selection data and pump curves in a PDF format. For additional information on blackops, please visit our web site. www.blackmer.com Blackmer 19 Century Avenue SW, Grand Rapids, MI 953-153 USA T 1.1.111 F 1.1.375 www.blackmer.com

System One Heavy-Duty Process Pumps - Advantages Wider Window of Operation Off the BEP (Best Efficiency Point) High Loads H/Q Curve BEP Typical seal-less or mag-drive pumps Radial Load Head Conventional centrifugal pumps BEP Flow Low Loads Flow System One pumps Many processes demand operation off the BEP where higher loads can create damaging vibration. Process Pump Challenges: Due to process changes and variations, the majority of process pumps operate off the BEP where radial loads create high stresses. Conventional pumps are prone to damaging shaft vibration under off-bep conditions. Seal and bearing failures result from vibration damage. Shaft System One pumps resist vibration for a larger operational window off the BEP and greater reliability. System One Is The Solution: Heavy-duty design for the toughest applications in the process industry. System One pumps are designed to prevent vibration under high radial loads. System One pumps offer the widest operational window off the BEP of any standard process pump. Seals and bearings last longer for greater system reliability. When your process demands that pumps vary from the BEP, System One will save you money and prevent lost production. Bearings Solid design, low deflection shaft prevents common vibration damage Prevents common vibration damage. Heavier duty construction and lower stiffness ratios than competing pumps. Frame S (1.9) Frame LD17 17 (.5) Frame M 19 (.7) Greater stability at seal area improves seal life. Short shaft overhang reduces bearing load to extend bearing life. Heavy-duty bearings with longer bearing life Larger bearings than competing pumps for greater load capacity and bearing life. Bolted retainer cover locks thrust bearing into cartridge for enhanced reliability. Angular contact thrust bearings as required by API 1 specification. Blackmer 19 Century Avenue SW, Grand Rapids, MI 953-153 USA T 1.1.111 F 1.1.375 www.blackmer.com 3 CERTIFIED I S O 9 1

System One Construction Heavy-Duty Process Pumps - Advantages Pumps designed specifically to operate in severe applications. Resist vibration that would otherwise cause frequent maintenance shutdowns. Frame LD17 shown. Patented micrometer adjustment nuts simplify and ensure precise impeller setting for maximum efficiency. U.S. Patent #,39,9 Solid shaft (no sleeve) with minimal overhang provides superior resistance to deflection. Lowest L 3 /D ratio in the industry. Positive locking thrust bearing retainer cover for maximum bearing holding power and minimum axial movement. Large inlet for easy filling of oil. Close fitting cover minimizes dirt and moisture entry. Patented System One Labyrinth Seals provide nonwearing lifetime protection for radial and thrust bearings. U.S. Patent #,57,517 Precision cast smooth surface for efficient flow. Oversized 731 (pr) angular contact bearings are standard for high thrust capability, as required by API 1 specifications. Rabbet for C-Frame (NEMA) or D-Flange (IEC) motor adaptor provides for automatic mechanical motor alignment without special tools or excessive labor. Two magnetic plugs are provided to maintain clean oil and are removable for insertion of cooling coil. Full support rear leg assures bearing frame remains upright during pump disassembly. Full adjustability aids in alignment. Oil sight glass for constant monitoring of oil level and condition. Flinger filter constantly cleans oil during pump operation. U.S. Patent #,,5 Optional bearing oil temperature monitor indicates potential failure of bearings and/or lubrication by an increase in oil temperature. Blackmer System One Performance Assurance Five Year Power End Performance Assurance Should any System One power end component fail within 5 years of the original installation, including bearings or shafts that have fractured, a free replacement component will be provided. This offer is limited to a claim for one of each component per power end.* One Year Mechanical Seal Performance Assurance Should any factory supplied and installed mechanical seal Large bore seal chamber (available with optional throat bushing). Centerline casing support legs are adjustable for pipe variations and minimize heat effects, as required by API 1 specifications. fail within one year after the sale of the pump and seal, a spare parts kit (with materials the same as the original seal) will be provided at no charge. Program includes power end conversions that were purchased with Blackmer System One back cover conversions. Limit of one seal claim per application.* *See current Blackmer System One Warranty, Form 1-, for full product warranty details including exclusions and limitations of liability. blackops: Blackmer Optimum Pump Solutions blackops is a selection software program created specifically for Blackmer s System One centrifugal and positive displacement pump lines. The program allows you to print (or save) your pump selection data and pump curves in a PDF format. For additional information on blackops, log onto www.blackmer.com. Blackmer 19 Century Avenue SW, Grand Rapids, MI 953-153 USA T 1.1.111 F 1.1.375 www.blackmer.com CERTIFIED I S O 9 1

System One Heavy-Duty Process Pumps - Advantages Wet Ends Centerline design provides balanced thermal growth to prevent mechanical stresses The System One Frame A pump casing meets all ASME/ANSI specifications and dimensions while offering a centerline mounted design.the centerline configuration eliminates many of the stresses and strains that can damage seals and bearings due to thermal growth in elevated temperature applications. Centerline design, required by API 1 specifications, is standard on all Frame A and LD17 pumps. The Frame S offers an optional bearing frame foot with overhung casing, while the Frame M offers steel centerline casing legs as an option. Casing wall thickness includes 1/" (3. mm) corrosion allowance. Back covers offer improved mechanical reliability All back covers incorporate the state-of-the-art System One large bore seal chamber in both straight and open taper bore configurations for a superior sealing environment. In addition, a separate patented radial packing chamber is available as an option for those applications where packing is desired. The 13" (33 mm) back covers are bolted to the casing by their own flange, offering improved mechanical reliability compared to conventional designs. Carbon, polyurethane and SpiralTrac 1 throat bushings are available when required. Precision cast/ high efficiency impellers System One pump wet end components incorporate the finest quality castings available today. Impellers are investment cast with precision vane layout, resulting in superior finish and balance for maximum hydraulic efficiency. The impeller design incorporates back pump-out vanes for reduction of pressure in the seal chamber, plus threaded-to-shaft attachment. Patented micrometer impeller adjustment mechanism results in precise, repeatable settings Impeller clearances are set by a patented micrometer adjustment mechanism (pat. #,39,9). This enables the pump to achieve maximum efficiency with precise repeatability. CERTIFIED 1 SpiralTrac is a registered trademark of the manufacturer, EnviroSeal Engineering Products Ltd., Waverly, Nova Scotia. I S O 9 1 Blackmer 19 Century Avenue SW, Grand Rapids, MI 953-153 USA T 1.1.111 F 1.1.375 www.blackmer.com 5

System One Heavy-Duty Process Pumps - Advantages Mounting Maximum installation flexibility System One pumps allow maximum flexibility to meet any application criteria. Side discharge is possible with the addition of a special foot. System One pumps are the only ASME/ANSI pump with these mounting configuration options. CERTIFIED I S O 9 1 Right or left side discharge available Self-supporting power end A unique feature of System One Frame A/LD17 pumps which provides ease of maintenance. Motor alignment is automatically, mechanically achieved Every System One pump is equipped to accept a C-Frame (NEMA)/D-Flange (IEC) motor adaptor. This provides for alignment of motor and power end without special tools or excessive labor. Because alignment is mechanical, it is fast and repeatable thus reducing misalignment-induced vibration. Blackmer 19 Century Avenue SW, Grand Rapids, MI 953-153 USA T 1.1.111 F 1.1.375 www.blackmer.com

System One Heavy-Duty Process Pumps Product Line Frames S & SD Mid-size frame strength and reliability in small frame space heavy-duty alternative to standard small frame pumps Lowest L 3 /D stiffness ratio of any competitive size pump (1.9) Frame S Meets ASME/ANSI dimensional specifications Frame SD is the DIN/ISO (metric) version Capacities to 5 gpm ( m 3 /hr) Frame A/LD17 Low maintenance, long life, maximum value process pump Most stable shaft in the industry Lowest L 3 /D stiffness ratio of any competitive size pump 17 (.5) Frame LD17 Dramatically reduces bearing, sealing device and shaft failures Frame A meets ASME/ANSI dimensional specifications LD17 configuration available for severe-duty applications Available in IPP Metric construction Capacities to 1, gpm (3 m 3 /hr) Vortex Vortex pump puts System One strength and reliability in the service of handling entrained solids without clogging. Available in the LD17 and IPP Metric configurations. Capacities to 1,5 gpm (3 m 3 /hr). Frame A and LD17 pump with vortex casing and impeller, designed specifically for difficult pumping situations: Sludges and slurries with large solids Pumped material with entrained air Pumped fluids with stringy or fibrous materials Minimum product shearing ASME/ANSI & IPP Metric flanges available Especially suited for: Waste treatment Food and chemical processing Pulp and paper Agriculture Frame M Engineered reliability for the most demanding environments Lowest L 3 /D ratio of any process pump in this size range 19 (.7) Frame M The only ASME/ANSI B73.1 pump of its size that offers centerline mount for high temperature applications Optional left/right side discharge Power End Conversions Upgrade existing pumps to System One heavy-duty design Low stiffness ratio power end for maximum reliability Direct replacements available for popular models Universal configurations to fit most other pumps www.blackmer.com World Headquarters 19 Century Avenue SW Grand Rapids, MI 953-153 USA T 1.1.111 F 1.1.375 7

System One Frame S (ASME/ANSI), Frame SD (DIN/ISO) Pumps Construction Mid-frame strength and reliability in small-frame space. Frame S 3 3 1 5 1 7 9 1 Frame SD (optional Frame S) 1 Patented lifetime labyrinth seals (pat. #,5,517) protect bearings from intrusion of contaminants without causing the shaft damage typical of lip seals. Patented micrometer adjustment nuts (pat. #,39,9) fine tune impeller setting for maximum efficiency. 3 Heavy-duty bearings (two sizes larger than industry standard) provide maximum durability and life. Angular contact thrust bearings optional on Frame S, standard on Frame SD. Large shaft cross-section combined with short span adds to structural integrity and resists vibration for longer bearing and seal life. 5 Open frame concept for ease of seal maintenance. Rabbet for C-Frame (NEMA) or D-Flange (IEC) motor adaptor provides for automatic mechanical motor alignment without special tools or excessive labor. 11 13 7 Positive locking thrust bearing retaining cover for maximum bearing holding power and minimum axial movement. Sight glass for easy observation of oil condition and level. 9 Cooling fins to reduce temperature of oil and bearings. 1 Self-supporting foot. 11 Frame mounted foot provides self-supporting power end and ideal mounting configuration for high temperature applications. Seal chamber with large fluid volume promotes better cooling and cleaning action for longer seal life. Optional seal chamber jacket capability for cooling the mechanical seal. 13 Optional casing mounted foot to conform to ASME/ANSI standard. (Standard on Frame SD to DIN/ISO spec.) Blackmer 19 Century Avenue SW, Grand Rapids, MI 953-153 USA T 1.1.111 F 1.1.375 www.blackmer.com

System One Frame S/SD Dimensions Frame S (ASME/ANSI) Frame SD (DIN/ISO) 13.5. 35 A 1.75 5.5 H.7 dia. ø 5.5 H1 F 1 5 7.5 E1 E1 3.. 11 55 CLEARANCE HOLES FOR M BOLTS PLACES 35 N/ N DISCHARGE CENTER LINE 7 Frame S Pump ASME/ANSI Pump Size F 1 E 1 1 1 x 1.5-. 5.5 x 3-. 5.5 3 1 x 1.5-.5 7.5 1.5 x 3-.5 7.5 All dimensions are in inches. Frame SD Pump DIN/ISO Pump Size A H 1 H N 1 3 x 5-1 13 1 19 3 x 5-1 1 19 3 5 x - 1 1 All dimensions are in millimeters. Heavy-duty alternative to standard small frame pumps Lowest L 3 /D stiffness ratio of any competitive size pump Designed and built for the toughest applications Blackmer 19 Century Avenue SW, Grand Rapids, MI 953-153 USA T 1.1.111 F 1.1.375 www.blackmer.com 9

System One Pump Design Data - Frame S (ANSI) 1 x 1.5- x 3-1 x 1.5-1.5 x 3- Shaft L 3 /D Ratio (1.9) Diameter at Impeller.75-1UNC Thread (19) Diameter at Seal 1.5 (3) Diameter Between Bearings 1.9 (5) Diameter at Coupling.7 () Bearings Thrust 53 AHC3 Thrust Option 73 BEGBY (pair) Radial 3 C3 Bearing Span 3. (9) Shaft Overhang.15 (15) Seal Chamber Seal Bore Diameter (nose).3 () Inside Bore 3. (7) Depth.1 (5) Back Cover/Shaft Clearance. Diametral (.5) Gland Bolting X.375-1UNC on 3.5 Bolt Circle Diameter (1 on 9 B.C.) Distance to Nearest Obstruction.3 () Clearance. (1.5) Total.15 (.)Suction Side Eye Area sq. in. (cm ) 3.3 (1).1 (5).13 (7) 5.71 (37) Maximum Diameter Solids.3 (). (15). (1).5 (13) Number of Vanes 5 5 5 Pumps Weights lbs/kg Pump Only 11 (5) 13 (59) 1 (5) (57) Casing Lowest Wall L3/d Thickness stiffness ratio Maximum Working Pressure of any competitive size pump SHAFT DRAWING Type Single Volute. (11) Minimum See Pressure vs.temperature Limit Chart Test pressure Class 15 Flanges-5PSIG, Class 3 Flanges-5PSIG Rotating Element Wk Dry lbs-ft (kg-m ).1 (.7). (.1).3 (.15).3 (.1) Wk Wet lbs-ft (kg-m ).7 (.11).3 (.15).57 (.). (.) Maximum Speed (oil lube) 35 35 35 35 Power Limits HP (KW)/1 RPM 31SS 1.1 (.9) Lowest L 3 /D stiffness ratio for any competitive size pump in the industry. S L Shaft Stiffness Ratio Comparison Chart d 3 d d 1 d SHAFT DIAMETERS BEARINGS STIFFNESS RATIO 1 In Stuffing Box (Less Sleeve)(d) In Stuffing Box ( With Sleeve)(d 1 ) Between Bearings (d ) At Coupling (d 3 ) Radial Thrust Bearing Span (S) Shaft Overhang (L) L 3 /D System One Frame S Competitor A with Sleeve Competitor A Solid Shaft Competitor B with Sleeve Competitor B Solid Shaft 1 1/ (3) 1 1/ () 1 3/ (35) 7/ () 1 1/ () N/A 1 3/ (35) N/A 1 1/ () N/A (51) 1 1/ (3) 1 1/ (3) 1 1/ (3) 1 1/ (3) 7/ () 7/ () 7/ () 7/ () 7/ () 3 7 7 53 53 53 535 535 3. (9). (15). (15). (13). (13).15 (15). (155). (155) 5.7 (19) 5.7 (19) (1.9) 13 (.5) (.5) 3 (1.3) 7 (.) 1 For good vibration resistance, especially at speeds above 175 RPM, the stiffness ratio should not exceed in the seal area. The higher the ratio, the higher the frequency of downtimes, especially as related to bearing and seal failures. The pump has less resistance to the common running conditions which cause vibration running off Best Efficiency Point (BEP), cavitation, motor misalignment, water hammer, worn parts, plugged or unbalanced impellers, poor piping. Blackmer 19 Century Avenue SW, Grand Rapids, MI 953-153 USA T 1.1.111 F 1.1.375 www.blackmer.com 1

System One Pump Assembly - Frame S, Horizontal " NO. ITEM NO. ITEM NO. ITEM 1 Casing 3 O-ring, Impeller Hub 13 Oil Sight Glass Impeller Key, Coupling Foot, Bearing Frame Shaft Micrometer Nut 1 Foot, casing (optional) 11 Back Cover 9 Lockwasher, Thrust Bearing 3 Stud, Cartridge 1 Bearing, Radial 73A Gasket, Casing Locknut, Cartridge 1 Bearing, Thrust Mechanical Seal 5 O-Ring, Cartridge 19 Bearing, Frame 9E Seal, Labyrinth Rotor, Radial Oil Filler Assembly Locknut, Thrust Bearing 9F Seal, Labyrinth O-Ring, Radial 1 Plug, Magnetic 33 Bearing Cartridge 9B Seal, Labyrinth Rotor,Thrust 33 Plug, Bearing Frame 35 Retainer Cover 9C Seal, Labyrinth O-Ring,Thrust 35 Plug, Casing Blackmer 19 Century Avenue SW, Grand Rapids, MI 953-153 USA T 1.1.111 F 1.1.375 www.blackmer.com 11

System One Pump Assembly - Frame S, Horizontal " NO. ITEM NO. ITEM NO. ITEM 1 Casing Key, Coupling 1 Foot, casing (optional) Impeller Micrometer Nut 3 Stud, Cartridge Shaft 9 Lockwasher, Thrust Bearing Locknut, Cartridge 11 Back Cover 73A Gasket, Casing 5 O-Ring, Cartridge 1 Bearing, Radial Mechanical Seal Oil Filler Assembly 1 Bearing, Thrust 9E Seal, Labyrinth Rotor, Radial 1 Plug, Magnetic 19 Bearing, Frame 9F Seal, Labyrinth O-Ring, Radial 3 Adapter Plate Locknut, Thrust Bearing 9B Seal, Labyrinth Rotor,Thrust 33 Plug, Bearing Frame 33 Bearing Cartridge 9C Seal, Labyrinth O-Ring,Thrust 35 Plug, Casing 35 Retainer Cover 13 Oil Sight Glass 3 O-ring, Impeller Hub Foot, Bearing Frame Blackmer 19 Century Avenue SW, Grand Rapids, MI 953-153 USA T 1.1.111 F 1.1.375 www.blackmer.com

System One Auxiliary Pipe Connections List - Frame S V IV Discharge II Suction III VII XI VI I XI X ITEM NPT NUMBER CONNECTION NUMBER SIZE OF TAPS * I.3-1 1 Casing Drain II.5-1 1 Discharge Gage III.5-1 1 Suction Gage IV.-7 1 Seal Chamber Flush V.75-1 1 Oil Fill * VI.5-1 &.-7 Seal Chamber Jacket-Inlet & Outlet # VII.75-1 1 Oil Sight Glass ## X.5-1 1 Oil Drain XI.5-1 Magnetic Plug or Cooling Coil * * Optional # Left side of pump facing suction end ## Right side of pump facing suction end Blackmer 19 Century Avenue SW, Grand Rapids, MI 953-153 USA T 1.1.111 F 1.1.375 www.blackmer.com 13

System One Frame S/SD - Composite Pump Curves Frame S (ASME/ANSI) Frame SD (DIN/ISO) Frame S Pump ASME/ANSI Pump Size F 1 E 1 1 1 x 1.5-. 5.5 x 3-. 5.5 3 1 x 1.5-.5 7.5 1.5 x 3-.5 7.5 All dimensions are in inches. Frame SD Pump DIN/ISO Pump Size A H 1 H N 1 3 x 5-1 13 1 19 3 x 5-1 1 19 3 5 x - 1 1 All dimensions are in millimeters. Blackmer 19 Century Avenue SW, Grand Rapids, MI 953-153 USA T 1.1.111 F 1.1.375 www.blackmer.com 1

1 5 1 1. in 5. in 3 5 55 5 55 5 3 1. in 3.5 in 1. 9..... 3.. 3.5 in. in 5. in. in 3. in 3.5 in 1 3 5 7 9 1 11 13 1 15 1 1 1 1 3 3 3 Curve No: S11V1 Blackmer System One Pump Size: 1x1.5 Pump Performance Characteristics Effective Date: Jan/5 Catalog: 131 Speed: 355 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

1 3 3 1. in 5. in. in 3 3 1 3 1 3.... 1..9..3. in 5. in. in.... 1. 5..5. 5 1 15 5 3 35 5 5 55 5 7 1 3 5 7 9 1 11 13 1 15 Curve No: S1V1 Blackmer System One Pump Size: 1x1.5 Pump Performance Characteristics Effective Date: Jan/5 Catalog: 131 Speed: 175 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

1 5 3 1 1 1. in 5. in. in 3 37 1 3 37 1 1...1.. in 5. in. in...9 3...3. 1.5. 5 1 15 5 3 35 5 1 3 5 7 9 1 Curve No: S11V1 Blackmer System One Pump Size: 1x1.5 Pump Performance Characteristics Effective Date: Jan/5 Catalog: 131 Speed: 115 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

5 15 15 135. in 5 1 7 7 7 75 3 15 9 75 5. in. in 75 7 7 1 7 5 5 1 3 15 1. in 5. in. in 9 3 3 15 5 1 15 5 3 35 5 5 1 3 5 7 9 1 11 Curve No: S11V1 Blackmer System One Pump Size: x3 Pump Performance Characteristics Effective Date: Jan/5 Catalog: 131 Speed: 355 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

1 3 3. in 5 59 7 1 5.5 in.5 in 5 7 59 1... in.. 1..5 in 5.5 in... 1..... 1 1 1 1 1 1 1 1 3 3 3 3 3 Curve No: S11V1 Blackmer System One Pump Size: x3 Pump Performance Characteristics Effective Date: Jan/5 Catalog: 131 Speed: 175 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

1 5 1 3 15 1 1 9. in 5. in.5 in 1 5 5 7 7 5 5 1 3.....5 in 5. in. in.. 1....... 1 3 5 7 9 1 11 13 1 15 1 1 1 1 3 3 3 Curve No: S111V1 Blackmer System One Pump Size: x3 Pump Performance Characteristics Effective Date: Jan/5 Catalog: 131 Speed: 115 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

3 1 3 1. in 7. in. in 5.5 in 3 7 5 5 5 5 7 3 15 1 5 1. in 5.5 in 7. in. in 3 7 3 1 1 1 1 1 5 1 15 5 3 35 5 5 55 Curve No: S11V1 Blackmer System One Pump Size: 1x1.5 Pump Performance Characteristics Effective Date: Jan/5 Catalog: 131 Speed: 355 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

5 7. in 7.5 in 33 3 3 7 9 15 1 5 3.5 in 5.5 in 9 3 7 5 1.. 1.. 5.5 in.5 in 7.5 in. in.. 1..... in. 5.5 in. 1 3 5 7 9 1 11 1 1 1 1 Curve No: S111V1 Blackmer System One Pump Size: 1x1.5 Pump Performance Characteristics Effective Date: Jan/5 Catalog: 131 Speed: 175 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

1 3 3. in 7. in 3 3 3 9 9 1. in 5.5 in 3. 1.. in...5. in 5.5 in 7. in...9 3...3.. in 1.5 5.5 in. 5 1 15 5 3 35 5 5 55 5 7 75 1 3 5 7 9 1 11 13 1 15 1 17 Curve No: S111V1 Blackmer System One Pump Size: 1x1.5 Pump Performance Characteristics Effective Date: Jan/5 Catalog: 131 Speed: 115 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

9 7 5 3 3 7 1 1 15 9. in 7. in. in 5. in 3 5 55 59 3 3 55 59 1 3 3. in 15 1 5 1 5. in. in 7. in 3 1 5 1 15 5 3 35 5 1 3 5 7 9 1 Curve No: S111V1 Blackmer System One Pump Size: 1.5x3 Pump Performance Characteristics Effective Date: Jan/5 Catalog: 131 Speed: 355 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

15 7 5. in.5 in 39 5 51 55 57 5 5 57 55 1 3 5. in 39 5 51 5 1 5. 3.. in. 1..5 5. in.5 in.. 1 1 1 1 1 1 1 1 1 3 3 3 3 3 Curve No: S1V1 Blackmer System One Pump Size: 1.5x3 Pump Performance Characteristics Effective Date: Jan/5 Catalog: 131 Speed: 175 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

1 33 3 7 1 1 15. in 7. in. in 5. in 3 5 5 5 57 5 5 5 57 5 5 9 3 3. 1.. in.... 5. in. in 7. in.... 1. 5..5. 1 3 5 7 9 1 11 13 1 1 1 1 1 3 Curve No: S1V1 Blackmer System One Pump Size: 1.5x3 Pump Performance Characteristics Effective Date: Jan/5 Catalog: 131 Speed: 115 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

1 5 1 17 mm 15 mm 33 3 3 7 5 5 1 3 7 3 13 mm 1 3 13 mm 15 mm 17 mm 1 17 mm 3 13 mm 1 1 1 1 3 3 3 1 3 5 7 9 1 11 13 1 Curve No: S15V1 Blackmer System One Pump Size: 3x5 1 Pump Performance Characteristics Effective Date: Jan/5 Catalog: 131 Speed: 9 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

5 1 35 3 5 1 17 mm 15 mm 13 mm 31 35 39 1 1 39 35 15 31 1 5 1. 1....5 13 mm 15 mm 17 mm.. 3.5.5 1.. 1. 13 mm 17 mm.. 1 3 5 7 9 1 11 13 1 15 1 5 1 15 5 3 35 5 5 55 5 7 Curve No: S17V1 Blackmer System One Pump Size: 3x5 1 Pump Performance Characteristics Effective Date: Jan/5 Catalog: 131 Speed: 15 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

5 73 1 mm 33 39 3 5 15 55 37 1 mm 1 mm 5 3 1 7 5 1 9 1 1 mm 1 mm 1 mm 1 3 1 1 1 1 3 3 3 3 1 3 5 7 9 1 11 13 1 15 Curve No: S1131V1 Blackmer System One Pump Size: 3x5 Pump Performance Characteristics Effective Date: Jan/5 Catalog: 131 Speed: 9 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

5 1 1 1 1 mm 1 mm 33 37 1 3 3 1 3 1 1 mm 33 37 1 1. 1. 1 mm 1.... 1 mm 1 mm..... 1. 1 mm 1 mm.9. 1 3 5 7 9 1 11 13 1 15 1 17 1 5 1 15 5 3 35 5 5 55 5 7 75 Curve No: S1133V1 Blackmer System One Pump Size: 3x5 Pump Performance Characteristics Effective Date: Jan/5 Catalog: 131 Speed: 15 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

7 1 mm 3 5 51 55 5 5 15 5 1 mm 55 1 3 1 mm 51 5 5 1 5 15 1 5 1 1 mm 1 mm 1 mm 1 1 mm 1 mm 5 1 15 5 3 35 5 5 55 5 7 75 5 1 1 1 1 3 3 3 3 Curve No: S1137V1 Blackmer System One Pump Size: 5x Pump Performance Characteristics Effective Date: Jan/5 Catalog: 131 Speed: 9 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

1 5 1 1 1 mm 1 mm 35 3 5 55 5 59 59 5 55 3 1 1 mm 3 5 1. 3. 3. 1 mm. 1. 1.5 1 mm 1 mm.. 1 5 1 15 5 3 35 5 1 3 5 7 9 1 11 13 1 15 1 17 1 19 Curve No: S1139V1 Blackmer System One Pump Size: 5x Pump Performance Characteristics Effective Date: Jan/5 Catalog: 131 Speed: 15 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

3 1 3 15 mm 7 mm 3 1 5 55 5 5 55 5 1 mm 9 mm. 3. 15 mm 3.. 1. 1.5 9 mm mm 7 mm..... 3. 1.. 1 1 1 1 1 3 5 7 9 1 11 Curve No: S111V1 Blackmer System One Pump Size: 1x1.5 Pump Performance Characteristics Effective Date: Jan/5 Catalog: 131 Speed: 9 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

1 3 5 9 7 15 mm 3 3 15 5 7 mm mm 3 3 1 3 5 1......3 mm 7 mm 15 mm.. 3.5.. 1.5.. 1 3 5 7 9 1 11 13 1 5 1 15 5 3 35 5 5 55 Curve No: S113V1 Blackmer System One Pump Size: 1x1.5 Pump Performance Characteristics Effective Date: Jan/5 Catalog: 131 Speed: 15 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

.. 1... 3. 3.... 1. 15 mm 7 mm mm 33 3 1 3 33 3 3 1. 1........1.15.1.5... mm 7 mm 15 mm.. 1...... 1 3 5 7 9 1 1 1 1 3 3 3 3 3 Curve No: S115V1 Blackmer System One Pump Size: 1x1.5 Pump Performance Characteristics Effective Date: Jan/5 Catalog: 131 Speed: 9 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

33 1 3 7 1 1 15 15 mm 7 mm 51 59 7 7 75 7 7 75 7 7 mm 59 9 3 1 15 mm mm 7 mm 1 5 1 15 5 3 35 5 5 55 5 7 75 5 9 1 1 1 1 3 3 3 3 3 Curve No: S117V1 Blackmer System One Pump Size: x3 Pump Performance Characteristics Effective Date: Jan/5 Catalog: 131 Speed: 9 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

5.. 15. 1.. 7.. 5... 3. 15 mm 7 mm 11 mm 3 51 5 7 51 7 5. 5. 1.... 1. 1. 15 mm...5 11 mm 7 mm.. 1 5 1 15 5 3 35 5 1 3 5 7 9 1 11 13 1 15 1 17 1 19 Curve No: S119V1 Blackmer System One Pump Size: x3 Pump Performance Characteristics Effective Date: Jan/5 Catalog: 131 Speed: 15 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

1 3 3 15 mm 5 5 7 9 9 133 mm 7 1 11 mm 5 5 1..3.3..1.15 11 mm 133 mm 15 mm... 1..... 1 1 1 1 1 3 5 7 9 1 11 Curve No: S1111V1 Blackmer System One Pump Size: x3 Pump Performance Characteristics Effective Date: Jan/5 Catalog: 131 Speed: 9 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

7 15 5 3 mm 17 mm 37 5 5 53 53 5 5 1 3 15 mm 1 mm 5 1 1 3 mm 15 mm 1 mm 17 mm 5 1 15 5 3 35 5 5 1 1 1 1 Curve No: S1113V1 Blackmer System One Pump Size: 1x1.5 Pump Performance Characteristics Effective Date: Jan/5 Catalog: 131 Speed: 9 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

1 5 1 1 3 mm 17 mm 3 39 3 7 9 5 5 9 7 3 1 15 mm 1 mm 3 1. 1.5 1..5 1.. 1 mm 15 mm 17 mm 3 mm...5 1.5 3. 1.5. 3 mm. 1 mm. 1 1 1 1 5 1 15 5 3 35 5 5 55 5 7 75 5 9 95 Curve No: S1115V1 Blackmer System One Pump Size: 1x1.5 Pump Performance Characteristics Effective Date: Jan/5 Catalog: 131 Speed: 15 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

5... 7.. 5. 3 mm 17 mm 33 3 3 7 9 5 9 7 15. 1... 3. 15 mm 1 mm 3. 5. 1..........3 1 mm 15 mm 17 mm 3 mm.. 1. 1.... 3 mm.3 1 mm. 1 3 5 7 9 1 11 13 1 15 5 1 15 5 3 35 5 5 55 5 Curve No: S1117V1 Blackmer System One Pump Size: 1x1.5 Pump Performance Characteristics Effective Date: Jan/5 Catalog: 131 Speed: 9 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

15 5 3 mm 17 mm 9 55 3 3 1 3 15 mm 55 7 mm 5 1 1 15 1 5 7 mm 15 mm 17 mm 3 mm 1 5 1 15 5 3 35 5 5 55 5 7 75 1 1 1 1 3 3 Curve No: S1119V1 Blackmer System One Pump Size: 1.5x3 Pump Performance Characteristics Effective Date: Jan/5 Catalog: 131 Speed: 9 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

5 1 1 3 mm 17 mm 39 5 51 55 57 57 3 1 15 mm 7 mm 39 5 55 51 1. 1. 3 mm 1.5 1..5.9 7 mm 15 mm 17 mm.. 9. 3.. 3.. 1.5. 1 1 1 1 3 3 3 3 3 1 3 5 7 9 1 11 13 1 15 1 17 Curve No: S11V1 Blackmer System One Pump Size: 1.5x3 Pump Performance Characteristics Effective Date: Jan/5 Catalog: 131 Speed: 15 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

5.. 7.. 15. 1. 5.. 5... 3.. 1. 3 mm 17 mm 15 mm 7 mm 39 5 51 55 57 39 5 5 5 57 55 51...... 3 mm...3 7 mm 15 mm 17 mm.. 3. 1.. 1...5. 1 1 1 1 1 3 5 7 9 1 11 Curve No: S13V1 Blackmer System One Pump Size: 1.5x3 Pump Performance Characteristics Effective Date: Jan/5 Catalog: 131 Speed: 9 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

System One Frame LD17 Pump (ASME/ANSI/IPP Metric) Construction Construction Pump designed specifically to operate in severe applications. Resists vibration that would otherwise cause frequent maintenance shutdowns. 1 1 11 3 7 3 9 13 (Optional oil temperature monitor shown) 5 1 Patented micrometer adjustment nuts (pat. #,39,9) fine tune impeller setting for maximum efficiency. Positive locking thrust bearing retainer cover for maximum bearing holding power and minimum axial movement. 3 Patented System One Labyrinth Seals (pat. #,57,517) provide a non-wearing lifetime protection for radial and thrust bearings. 731 (pr) angular contact bearings are standard for high thrust capability. 5 Full support rear leg assures bearing frame remains upright during pump disassembly. Full adjustability aids in alignment. Two magnetic plugs are provided to maintain clean oil and are removable for insertion of cooling coil. 7 Solid shaft (no sleeve) with minimal overhang provides superior resistance to deflection. Lowest L 3 /D stiffness ratio in the industry. Accepts most standard mechanical seals. 9 Rabbet for C-Frame (NEMA) or D-Flange (IEC) motor adaptor provides for automatic mechanical motor alignment without special tools or excessive labor. 1 Large oil inlet for easy filling of oil. The sealed cover minimizes dirt and moisture entry. 11 Flinger filter constantly cleans oil during pump operation. Centerline casing support legs are adjustable for pipe variations and minimize heat effects as required by API 1 spec. 13 Oil sight glass for constant monitoring of oil level and condition. Optional throat bushing available for specific seals. Blackmer 19 Century Avenue SW, Grand Rapids, MI 953-153 USA T 1.1.111 F 1.1.375 www.blackmer.com 5

System One Frame A Pump (ASME/ANSI/IPP Metric) Construction Construction Low maintenance, long life, maximum value process pump. Dramatically reduces bearing, sealing device and shaft failures. 1 5 9 7 1 1 11 3 1 17 13 15 (Optional oil temperature monitor shown) 1 Patented micrometer adjustment nuts (pat. #,39,9) fine tune impeller setting for maximum efficiency. Patented System One Labyrinth Seals (pat. #,57,517) provide a non-wearing lifetime protection for radial and thrust bearings. 3 731 (pr) angular contact bearings provided for maximum thrust capacity. Full support rear leg assures bearing frame remains upright during pump disassembly. Full adjustability aids in alignment. 5 Large oil inlet for easy filling of oil. The sealed cover minimizes dirt and moisture entry. Flinger filter constantly cleans oil during pump operation. 7 All standard mechanical seals can be installed on a System One pump. Optional seal chamber jacket for cooling the mechanical seal. Solid alloy shaft (no sleeve) and minimal overhang assure the highest rigidity and corrosion resistance. 9 Frame adaptor has a 1 unobstructed opening for ease of maintenance. 1 State-of-the-art casting methods provide smoothest possible surfaces for highest efficiency. 11 Cast-in impeller nut makes removal easy. Centerline casing support legs are adjustable for pipe variations and minimize heat effects as required by API 1 spec. 13 Two magnetic plugs are provided to maintain clean oil and are removable for insertion of cooling coil. 1 Rabbet for C-Frame (NEMA) or D-Flange (IEC) motor adaptor provides for automatic mechanical motor alignment without special tools or excessive labor. 15 Oil sight glass for constant monitoring of oil level and condition. 1 Positive locking thrust bearing retainer cover for maximum bearing holding power and minimum axial movement. 17 Bushing options include carbon, polyurethane and SpiralTrac 1. 1 SpiralTrac is a registered trademark of the manufacturer, EnviroSeal Engineering Products Ltd., Waverly, Nova Scotia. Blackmer 19 Century Avenue SW, Grand Rapids, MI 953-153 USA T 1.1.111 F 1.1.375 www.blackmer.com

System One Frame LD17 Dimensions LD17 Pump (ASME/ANSI) LD17 Pump (IPP Metric).1. A 59 1 A.19 X 5 X O O 1.37 D 3 D F A F A E E 1 E 1 E E E 1 E E 1 LD17 Pump ASME/ANSI Pump Size Discharge Suction X D O F E 1 E A A 1 x 3-. 3. 9.5.5 17.75 9.1 9.75 7.5 15. 15. 7 3 x - 3.. 11..5 19.5 9.1 9.75 7.5 15.75 15.75 1 x -1 1...5.5 1.75 9.1 9.75 7.5 15.75 15.75 9 1.5 x 3-1 1.5 3..5.5 1.75 9.1 9.75 7.5 1.13 1.13 1 x 3-1. 3. 9.5.5 17.75 9.1 9.75 7.5 1.3 1.3 11 3 x -1 3.. 11.1.5 19.5 9.1 9.75 7.5 13.3 17.3 x -1.. 13.5 1. 3.5 9.1 9.75 7.5 1. 19.9 13 1.5 x 3-13 1.5 3. 1.5 1..5 9.1 9.75 7.5 15..5 1 x 3-13. 3. 11.5 1. 1.5 9.1 9.75 7.5 15.3. 15 3 x -13 3...5 1..5 9.1 13. 7.5 1.3.13 1 x -13.. 13.5 1. 3.5 9.1 13. 7.5 17.5 3.7 All dimensions are in inches. LD17 Pump IPP Metric Pump Size Discharge Suction X D O F E 1 E A A 1 5 x - 5 1 1 9 5 1 79 31 7 x 1-1 79 79 9 5 1 9 5 x 5-5 5 5 1 1 9 5 1 9 9 x -5 1 1 9 5 1 31 19 1 5 x -5 5 1 1 9 5 1 31 1 11 x 1-5 1 79 79 9 5 1 3 1 x 15-5 1 15 33 5 593 9 5 1 37 5 13 x -33 7 5 517 9 5 1 31 51 1 5 x -33 5 9 5 5 9 5 1 391 53 15 x 1-3 1 31 5 5 9 33 1 5 1 1 x 15-3 1 15 33 5 593 9 33 1 5 All dimensions are in millimeters. The most stable shaft in the industry keeps mechanical seal faces perfectly centered for the lowest possible VOC emissions. Blackmer 19 Century Avenue SW, Grand Rapids, MI 953-153 USA T 1.1.111 F 1.1.375 www.blackmer.com 7

System One Frame A Dimensions Frame A (ASME/ANSI) 3.5..19 X O Frame A (IPP Metric) A 1 597 A 1 5 X O 1.375 D 3 D F E 1 E 1 F E E 1 A E E 1 A E E 1 E E 1 Frame A Pump ASME/ANSI Pump Size Discharge Suction X D O F E 1 E A A 1 x 3-. 3. 9.5.5 17.75.5 9.75 7.5 15. 15. 7 3 x - 3.. 11..5 19.5.5 9.75 7.5 15.75 15.75 1 x -1 1...5.5 1.75.5 9.75 7.5 15.75 15.75 9 1.5 x 3-1 1.5 3..5.5 1.75.5 9.75 7.5 1.13 1.13 1 x 3-1. 3. 9.5.5 17.75.5 9.75 7.5 1.3 1.3 11 3 x -1 3.. 11.1.5 19.5.5 9.75 7.5 13.3 17.3 x -1.. 13.5 1. 3.5.5 9.75 7.5 1. 19.9 13 1.5 x 3-13 1.5 3. 1.5 1..5.5 9.75 7.5 15..5 1 x 3-13. 3. 11.5 1. 1.5.5 9.75 7.5 15.3. 15 3 x -13 3...5 1..5.5 13. 7.5 1.3.13 1 x -13.. 13.5 1. 3.5.5 13. 7.5 17.5 3.7 All dimensions are in inches. Frame A Pump IPP Metric Pump Size Discharge Suction X D O F E 1 E A A 1 5 x - 5 1 1 31 5 1 79 31 7 x 1-1 79 79 31 5 1 9 5 x 5-5 5 5 1 1 31 5 1 9 9 x -5 1 1 31 5 1 31 19 1 5 x -5 5 1 1 31 5 1 31 1 11 x 1-5 1 79 79 31 5 1 3 1 x 15-5 1 15 33 5 593 31 5 1 37 5 13 x -33 7 5 517 31 5 1 31 51 1 5 x -33 5 9 5 5 31 5 1 391 53 15 x 1-33 1 31 5 5 31 33 1 5 1 1 x 15-33 1 15 33 5 593 31 33 1 5 All dimensions are in millimeters. Centerline mount for high temperature applications Optional left or right side discharge Blackmer 19 Century Avenue SW, Grand Rapids, MI 953-153 USA T 1.1.111 F 1.1.375 www.blackmer.com

System One Pumps Design Data - Frame LD17 System One Pumps Design Data Frame LD17 Shaft L3/D Ratio 17 (.5) Diameter at Impeller 1. (7) 1.- UNF Thread High Torque 1.31 (33) 1.5- UNF Thread Diameter at Seal 1.75 (7.3) Diameter Between Bearings.5 () Diameter at Coupling 1.375 (3.93) Bearings Thrust Radial SKF 731 BEGAY (pair) 31 C3 Bearing Span. (153) Shaft Overhang 5.9 (151) Seal Chamber Seal Bore Diameter (nose).9 () nose Inside Bore 3. (7) Depth. (51) Back Cover/Shaft Clearance Gland Bolting ANSI Open 5 Degree Taper X.5-13UNC on. B.C. ( on 117 B.C.) Distance to Nearest Obstruction.19 (5) Clearance. (1.5) Total.15 (.) Suction Side Eye Area sq. in. (cm ) 1. () 1. (). (1) 7.9 (51) 9. (1) 1. (). (173) 7.7 (5) 13.5 (7) 1. (93) 3. (195) Maximum Dia. Solids.5 (13). (15). (1). (1).7 (1). (). ().5 (13). (15).7 (1) 1. (5) Number of Vanes 5 5 5 5 Pumps Weights lbs/kgvanes Pump Only 5 (11) (1) (11) 59 (117) (1) 7 (5) 31 (13) 33 (15) 359 () 37 (1) 1 (1) CasingVanes Type Wall Thickness Maximum Working Pressure Test pressure Rotating Element Single Volute. (11) Minimum See Pressure vs.temperature Limit Chart Class 15 Flanges-5PSIG, Class 3 Flanges-5PSIG Wk Dry lbs-ft (kg-m ).53 (.).5 (.). (.9).79 (.33) 1. (.3) 1. (.3) 1. (.5) 1.5 (.3) 1. (.7).1 (.9). (.1) Wk Wet lbs-ft (kg-m ). (.33).7 (.33) 1. (.3) 1.19 (.5) 1.5 (.) 1.5 (.) 1. (.).5 (.95).7 (.113) 3.1 (.135) 3.7 (.15) Maximum Speed (oil lube) 35 35 35 35 35 35 175 35 35 35 175 Power Limits HP (KW)/1 RPM 31SS 3. (.) HP (KW)/1 RPM 17-Ph. (3.1) HP (KW)/1 RPM 17-Ph High Torque Reference drawings A1, A11 Inches (mm). x 3.- 3. x.- 1. x.-1 1.5 x 3.-1. x 3.-1 3. x.-1. x.-1 1.5 x 3.-13. x 3.-13 3. x.-13. x.-13 5. (.) Blackmer 19 Century Avenue SW, Grand Rapids, MI 953-153 USA T 1.1.111 F 1.1.375 www.blackmer.com 9

System One Pumps Design Data - Frame A System One Pumps Design Data FRAME A Shaft L3/D Ratio 5 (1.9) Diameter at Impeller 1. (7) 1.- UNF Thread High Torque 1.31 (33) 1.5- UNF Thread Diameter at Seal 1.75 () Diameter Between Bearings.5 () Diameter at Coupling 1.375 (35) Bearings Thrust Radial SKF 731 BEGAY (pair) 31 C3 Bearing Span. (153) Shaft Overhang.3 (19) Seal Chamber Seal Bore Diameter (nose).9 () nose Inside Bore 3.75 (95) Depth. (73) Back Cover/Shaft Clearance Gland Bolting ANSI. (3) Diametral X.5-13UNC on.75 B.C. ( on 1 B.C.) Distance to Nearest Obstruction 3. (7) Clearance. (1.5) Total.15 (.) Suction Side Eye Area sq. in. (cm ) 1. () 1. (). (1) 7.9 (51) 9. (1) 1. (). (173) 7.7 (5) 13.5 (7) 1. (93) 3. (195) Maximum Dia. Solids.5 (13). (15). (1). (1).7 (1). (). ().5 (13). (15).7 (1) 1. (5) Number of Vanes 5 5 5 5 Pumps Weights/Lbs. (kg.)vanes Pump Only 5 (11) (1) (11) 59 (117) (1) 7 (5) 31 (13) 33 (15) 359 () 37 (1) 1 (1) Casing Type Wall Thickness Maximum Working Pressure Test pressure Rotating Element Single Volute. (11) Minimum See Pressure vs.temperature Limit Chart Class 15 Flanges-5PSIG, Class 3 Flanges-5PSIG Wk Dry lbs-ft (kg-m ).53 (.).5 (.). (.9).79 (.33) 1. (.3) 1. (.3) 1. (.5) 1.5 (.3) 1. (.7).1 (.9). (.1) Wk Wet lbs-ft (kg-m ). (.33).7 (.33) 1. (.3) 1.19 (.5) 1.5 (.) 1.5 (.) 1. (.).5 (.95).7 (.113) 3.1 (.135) 3.7 (.15) Maximum Speed (oil lube) 35 35 35 35 35 35 175 35 35 35 175 Power Limits HP (KW)/1 RPM 31SS 3. (.) HP (KW)/1 RPM 17-Ph. (3.1) HP (KW)/1 RPM 17-Ph High Torque Reference drawings A1, A11 Inches (mm). x 3.- 3. x.- 1. x.-1 1.5 x 3.-1. x 3.-1 3. x.-1. x.-1 1.5 x 3.-13. x 3.-13 3. x.-13. x.-13 5. (.) Blackmer 19 Century Avenue SW, Grand Rapids, MI 953-153 USA T 1.1.111 F 1.1.375 www.blackmer.com 5

System One Pump Assembly and Parts List - Frame LD17 9D NO. ITEM NO. ITEM NO. ITEM 1 Casing Flinger 9F Seal, Labyrinth O-Ring (Radial) Impeller Micrometer Nut 13 Oil Sight Glass Shaft 9 Lockwasher, Thrust Bearing Foot, Bearing Frame 11 Back Cover 71 Frame Adapter 1 Foot, casing 1 Bearing, Radial 7 O-Ring Frame Adapter 3 Stud, Cartridge 1 Bearing, Thrust 73A Gasket, Casing Locknut, Cartridge 19 Bearing, Frame Mechanical Seal 5 O-Ring, Cartridge Locknut, Thrust Bearing 9A Seal, Labyrinth Stator, (Thrust) 1 Oil Filler Assembly 33 Bearing Cartridge 9B Seal, Labyrinth Rotor,(Thrust) 13 Bolt, Eye 35 Retainer Cover 9C Seal, Labyrinth O-Ring,(Thrust) 1 Pipe Plug, Magnetic 3 O-ring, Impeller Hub 9D Seal, Labyrinth Stator,(Radial) 33 Pipe Plug, Bearing Frame Key, Coupling 9E Seal, Labyrinth Rotor,(Radial) 35 Pipe Plug, Casing 1 Incorporated as part of cartridge in. Blackmer 19 Century Avenue SW, Grand Rapids, MI 953-153 USA T 1.1.111 F 1.1.375 www.blackmer.com 51

System One Pump Assembly and Parts List - Frame A NO. ITEM NO. ITEM NO. ITEM 1 Casing Flinger 9F Seal, Labyrinth O-Ring (Radial) Impeller Micrometer Nut 13 Oil Sight Glass Shaft 9 Lockwasher, Thrust Bearing Foot, Bearing Frame 11 Back Cover 71 Frame Adapter 1 Foot, casing 1 Bearing, Radial 7 O-Ring Frame Adapter 3 Stud, Cartridge 1 Bearing, Thrust 73A Gasket, Casing Locknut, Cartridge 19 Bearing, Frame Mechanical Seal 5 O-Ring, Cartridge Locknut, Thrust Bearing 9A Seal, Labyrinth Stator, (Thrust) 1 Oil Filler Assembly 33 Bearing Cartridge 9B Seal, Labyrinth Rotor,(Thrust) 13 Bolt, Eye 35 Retainer Cover 9C Seal, Labyrinth O-Ring,(Thrust) 1 Pipe Plug, Magnetic 3 O-ring, Impeller Hub 9D Seal, Labyrinth Stator,(Radial) 33 Pipe Plug, Bearing Frame Key, Coupling 9E Seal, Labyrinth Rotor,(Radial) 35 Pipe Plug, Casing 1 Incorporated as part of cartridge in. Blackmer 19 Century Avenue SW, Grand Rapids, MI 953-153 USA T 1.1.111 F 1.1.375 www.blackmer.com 5

System One Auxiliary Pipe Connections List - Frame LD17 & A V IV VI Discharge II III Suction XI VII X I ITEM NPT NUMBER CONNECTION NUMBER SIZE OF TAPS * # * # # ## I.5-1 1 Casing Drain II.5-1 1 Discharge Gage III.5-1 1 Suction Gage IV.5-1 1 Seal Chamber Flush (not available on LD17) V.75-1 1 Oil Fill VI.5-1 Seal Chamber Jacket* Inlet & Outlet (not available on LD17) VII 1.-11.5 1 Oil Sight Glass X.5-1 1 Oil Drain XI.5-1 Magnetic Plug or Cooling Coil* * Optional # Left side of pump facing suction end ## Right side of pump facing suction end (x-1 & x-13 Casings have discharge tap only ) Blackmer 19 Century Avenue SW, Grand Rapids, MI 953-153 USA T 1.1.111 F 1.1.375 www.blackmer.com 53

System One Frame LD17 & A - Composite Pump Curves Frame LD17/A (ASME/ANSI) Frame LD17/A Pump (IPP Metric) LD17 Pump ASME/ANSI Pump Size Discharge Suction X D O F E 1 E A A 1 x 3-. 3. 9.5.5 17.75 9.1 9.75 7.5 15. 15. 7 3 x - 3.. 11..5 19.5 9.1 9.75 7.5 15.75 15.75 1 x -1 1...5.5 1.75 9.1 9.75 7.5 15.75 15.75 9 1.5 x 3-1 1.5 3..5.5 1.75 9.1 9.75 7.5 1.13 1.13 1 x 3-1. 3. 9.5.5 17.75 9.1 9.75 7.5 1.3 1.3 11 3 x -1 3.. 11.1.5 19.5 9.1 9.75 7.5 13.3 17.3 x -1.. 13.5 1. 3.5 9.1 9.75 7.5 1. 19.9 13 1.5 x 3-13 1.5 3. 1.5 1..5 9.1 9.75 7.5 15..5 1 x 3-13. 3. 11.5 1. 1.5 9.1 9.75 7.5 15.3. 15 3 x -13 3...5 1..5 9.1 13. 7.5 1.3.13 1 x -13.. 13.5 1. 3.5 9.1 13. 7.5 17.5 3.7 All dimensions are in inches. LD17 Pump IPP Metric Pump Size Discharge Suction X D O F E 1 E A A 1 5 x - 5 1 1 9 5 1 79 31 7 x 1-1 79 79 9 5 1 9 5 x 5-5 5 5 1 1 9 5 1 9 9 x -5 1 1 9 5 1 31 19 1 5 x -5 5 1 1 9 5 1 31 1 11 x 1-5 1 79 79 9 5 1 3 1 x 15-5 1 15 33 5 593 9 5 1 37 5 13 x -33 7 5 517 9 5 1 31 51 1 5 x -33 5 9 5 5 9 5 1 391 53 15 x 1-3 1 31 5 5 9 33 1 5 1 1 x 15-3 1 15 33 5 593 9 33 1 5 All dimensions are in millimeters. Blackmer 19 Century Avenue SW, Grand Rapids, MI 953-153 USA T 1.1.111 F 1.1.375 www.blackmer.com 5

1 33 3 7. in 53 9 7 1 1 15 9 7. in. in 7 9 3 3 5. in 1 5. in 7. in 5 1 15 5 3 35 5 5 55 5 1 3 5 7 9 1 11 13 1 Curve No: S1V1 Blackmer System One Pump Size: x3 Pump Performance Characteristics Pump Size: 5x Effective Date: Jan/5 Catalog: 131 Speed: 355 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

7 5. in 7. in 5 59 7 7 15 1 3. in 59 5 1 3 1 3. in 7. in. in 1. in. in 1 1 1 1 5 1 15 5 3 35 5 5 55 Curve No: S11V1 Blackmer System One Pump Size: x3 Pump Performance Characteristics Pump Size: 5x Effective Date: Jan/5 Catalog: 131 Speed: 175 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

3 1 3. in 7. in 5 53 59 7 7 1. in 59 1.. in.... in 7. in.. 1...... 1 3 5 7 9 1 11 13 1 15 1 17 1 1 1 1 1 3 3 3 3 3 Curve No: S11V1 Blackmer System One Pump Size: x3 Pump Performance Characteristics Pump Size: 5x Effective Date: Jan/5 Catalog: 131 Speed: 115 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

1 33 3 7 1 1 15. in 7. in. in 53 1 73 7 77 77 1 7 73 9 3. in 3 1 3. in 7. in. in. in 5 1 15 5 3 35 5 5 55 5 7 75 5 9 1 1 1 1 Curve No: S11V1 Blackmer System One Pump Size: 3x Pump Performance Characteristics Pump Size: x1 Effective Date: Jan/5 Catalog: 131 Speed: 355 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

7 5. in 7. in 5 71 7 75 75 7 15 71 1 3. in 5 1 9 3. in 7. in. in 1. in. in 5 1 15 5 3 35 5 1 3 5 7 9 1 Curve No: S115V1 Blackmer System One Pump Size: 3x Pump Performance Characteristics Pump Size: x1 Effective Date: Jan/5 Catalog: 131 Speed: 175 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

3 1 3. in 7. in 5 55 7 7 75 75 7 1. in 7 1. 1.... 1.. in 7. in. in.. 1...... in.. in. 1 1 1 1 5 1 15 5 3 35 5 5 55 Curve No: S115V1 Blackmer System One Pump Size: 3x Pump Performance Characteristics Pump Size: x1 Effective Date: Jan/5 Catalog: 131 Speed: 115 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

5 1 1 5 35 3 9. in 9. in. in 35 7 9 5 5 9 7 5 7. in. in 15 1 5 3 1. in 7. in. in 9. in 9. in 9 3 3 15 1 1 1 1 5 1 15 5 3 35 5 5 55 Curve No: S115V1 Blackmer System One Pump Size: 1x 1 Pump Performance Characteristics Pump Size: 5x5 5 Effective Date: Jan/5 Catalog: 131 Speed: 355 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

35 3 5 15 15 9 75 5 9. in. in. in 3 35 1 7 1 7 1 3 5 15.. 3.. 1.. 3... in. in 9. in 1. 1.... 9. in 3.. in. 1 3 5 7 9 1 11 13 1 1 1 1 Curve No: S115V1 Blackmer System One Pump Size: 1x 1 Pump Performance Characteristics Pump Size: 5x5 5 Effective Date: Jan/5 Catalog: 131 Speed: 175 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

5 1 5 9. in 9. in 3 35 1 7 1 35 3. in 7 5 15 7. in. in 1 1 5 1..... in 7. in. in 9. in 9. in...3...5 9. in 1.. in. 5 1 15 5 3 35 5 5 55 5 7 75 5 1 3 5 7 9 1 11 13 1 15 1 17 1 19 Curve No: S115V1 Blackmer System One Pump Size: 1x 1 Pump Performance Characteristics Pump Size: 5x5 5 Effective Date: Jan/5 Catalog: 131 Speed: 115 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

5 1 1 5 35 3 9. in 9. in. in 1 53 5 1 1 5 53 5 7. in. in 15 1 5 9. in 3 1. in 7. in. in 9. in 9 3 3 15 5 1 15 5 3 35 5 5 1 3 5 7 9 1 11 Curve No: S11V1 Blackmer System One Pump Size: 1.5x3 1 Pump Performance Characteristics Pump Size: x 5 Effective Date: Jan/5 Catalog: 131 Speed: 355 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

35 3 15 9.3 in 9. in 7 53 5 59 9 59 5 75. in 5 53 15 5 7. in. in 7 1 3 5 15. 9.3 in...... in 7. in. in 9. in 1...... 1 1 1 1 5 1 15 5 3 35 5 5 Curve No: S1V1 Blackmer System One Pump Size: 1.5x3 1 Pump Performance Characteristics Pump Size: x 5 Effective Date: Jan/5 Catalog: 131 Speed: 175 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

1 1 5 5 35 3 5 9. in 9. in. in 7. in. in 53 57 59 59 57 53 15 1 5 1. 1..... 1... in 7. in. in 9. in 9. in 1....... 1 3 5 7 9 1 11 13 1 15 1 1 1 1 1 3 3 3 3 Curve No: S11V1 Blackmer System One Pump Size: 1.5x3 1 Pump Performance Characteristics Pump Size: x 5 Effective Date: Jan/5 Catalog: 131 Speed: 115 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

5 1 5 9. in 9. in 7 55 1 9 7 1 35 3. in 7 9 1 5 15 7. in. in 55 1 5 9. in. in 7. in. in 9. in 9 3 3 9. in 15. in 5 1 15 5 3 35 5 5 55 5 1 3 5 7 9 1 11 13 1 Curve No: S11V1 Blackmer System One Pump Size: x3 1 Pump Performance Characteristics Pump Size: 5x 5 Effective Date: Jan/5 Catalog: 131 Speed: 355 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

35 3 5 15 15 9 75 5 9. in 9. in. in 7. in. in 5 53 7 53 7 1 3 5 15 1 5. in 7. in. in 9. in 9. in 3 15 9. in. in 1 1 1 1 3 3 5 1 15 5 3 35 5 5 55 5 7 Curve No: S11V1 Blackmer System One Pump Size: x3 1 Pump Performance Characteristics Pump Size: 5x 5 Effective Date: Jan/5 Catalog: 131 Speed: 175 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

5 1 1 5 35 3 9. in 9. in. in 5 7 7 5 15 1 7. in. in 5 5 3.. 1.5 1..5. 1... in 7. in. in 9. in 9. in 1...... 1 1 1 1 1 1 1 1 3 3 3 3 3 Curve No: S117V1 Blackmer System One Pump Size: x3 1 Pump Performance Characteristics Pump Size: 5x 5 Effective Date: Jan/5 Catalog: 131 Speed: 115 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

5 1 35 3 9. in 9. in. in 5 5 7 79 1 1 79 7 5 7. in 15 1. in 5 5 9. in. in 7. in. in 9. in 5 5 1, 1, 1 1 1 1 Curve No: S117V1 Blackmer System One Pump Size: 3x 1 Pump Performance Characteristics Pump Size: x1 5 Effective Date: Jan/5 Catalog: 131 Speed: 355 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

11 3 5 15 1 9 7 5 9. in 9. in. in 7. in 51 59 71 7 75 75 7 71 59 1 3. in 5 1 1 7. in. in 9. in 9. in. in 3 15 9. in. in 5 1 15 5 3 35 5 5 55 1 3 5 7 9 1 11 13 Curve No: S117V1 Blackmer System One Pump Size: 3x 1 Pump Performance Characteristics Pump Size: x1 5 Effective Date: Jan/5 Catalog: 131 Speed: 175 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

5 1 5 9. in 9. in 5 71 7 75 1 35 3 5. in 7. in 75 7 71 15. in 1 5. 9. in 1...... in 7. in. in 9. in 1..... 9. in. in. 1 1 1 3 3 3 5 1 15 5 3 35 5 5 55 5 7 75 5 9 Curve No: S117V1 Blackmer System One Pump Size: 3x 1 Pump Performance Characteristics Pump Size: x1 5 Effective Date: Jan/5 Catalog: 131 Speed: 115 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

3 1 5 9 7 9. in 9. in. in 53 3 71 7 7 15 5 1 3 5 1 7 15 1 5 1 9. in 9. in 9. in 15 3 1, 1, 1 1 1 1 Curve No: S11V1 Blackmer System One Pump Size: x 1 Pump Performance Characteristics Pump Size: 1x15 5 Effective Date: Jan/5 Catalog: 131 Speed: 175 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

1 3 3 9. in 9. in 59 7 7 3 5 5 3. in 7 1. 9. in.... in 9. in.. 1...... 5 1 15 5 3 35 5 5 55 5 7 75 5 1 3 5 7 9 1 11 13 1 15 1 17 1 19 Curve No: S1V1 Blackmer System One Pump Size: x 1 Pump Performance Characteristics Pump Size: 1x15 5 Effective Date: Jan/5 Catalog: 131 Speed: 115 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

5 15 1 7 5 3 13. in. in 11. in 1. in 9. in 7 53 5 1 1 7 5 53 5 1 13. in 1 9. in 1. in 11. in. in 5 1 15 5 3 35 5 5 55 5 7 75 1 3 5 7 9 1 11 13 1 15 1 17 1 Curve No: S11V1 Blackmer System One Pump Size: 1.5x3 13 Pump Performance Characteristics Pump Size: x 33 Effective Date: Jan/5 Catalog: 131 Speed: 355 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

5 3 1 1 1 1 13. in. in 11. in 1. in 9. in 35 5 55 5 5 5 55 1 1 9. in 1. in 11. in. in 13. in 1.... 13. in. 9. in. 1 1 1 1 3 3 3 5 1 15 5 3 35 5 5 55 5 7 75 Curve No: S11V1 Blackmer System One Pump Size: 1.5x3 13 Pump Performance Characteristics Pump Size: x 33 Effective Date: Jan/5 Catalog: 131 Speed: 175 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

3 1 9 5 7 13. in. in 11. in 3 1 5 55 5 5 55 15 5 1. in 9. in 5 1 3 5 1.. 13. in 3.. 1. 3. 9. in 1. in 11. in. in.. 1..... 13. in. 9. in. 1 1 1 1 5 1 15 5 3 35 5 5 Curve No: S11V1 Blackmer System One Pump Size: 1.5x3 13 Pump Performance Characteristics Pump Size: x 33 Effective Date: Jan/5 Catalog: 131 Speed: 115 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

7 5. in 11. in 5 15 1 3 1. in 9. in 7 5 1 1. in 9 9. in 1. in 11. in 5. in 9. in 7 1, 1 1 1 1 Curve No: S119V1 Blackmer System One Pump Size: x3 13 Pump Performance Characteristics Pump Size: 5x 33 Effective Date: Jan/5 Catalog: 131 Speed: 355 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

5 1 1 1 13. in. in 11. in 1. in 5 5 3 3 1 9. in 1 15 1 5 3 15 13. in. in 11. in 1. in 9. in 15 3 5 1 15 5 3 35 5 5 55 1 3 5 7 9 1 11 Curve No: S119V1 Blackmer System One Pump Size: x3 13 Pump Performance Characteristics Pump Size: 5x 33 Effective Date: Jan/5 Catalog: 131 Speed: 175 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

5 7 5 13. in. in 11. in 3 5 5 1 3 1 15 1 3 1. in 9. in 5 5 1. 13. in... 9. in 1. in 11. in. in.. 1...... 1 1 1 1 3 3 3 5 1 15 5 3 35 5 5 55 5 7 75 Curve No: S119V1 Blackmer System One Pump Size: x3 13 Pump Performance Characteristics Pump Size: 5x 33 Effective Date: Jan/5 Catalog: 131 Speed: 115 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

1 1 1 5 11. in 1. in 9 57 7 73 1 3 9. in 73 7 1 11. in 1 9. in 1. in 1, 1, 1, 1 1 1 1 3 Curve No: S119V1 Blackmer System One Pump Size: 3x 13 Pump Performance Characteristics Pump Size: x1 33 Effective Date: Jan/5 Catalog: 131 Speed: 355 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

5 3 1 1 1 1 13. in. in 11. in 1. in 9. in 9 57 5 71 7 75 75 7 71 5 1 13. in 1 9. in 1. in 11. in. in 15 3 5 1 15 5 3 35 5 5 55 5 7 75 5 9 95 1 1 1 1 Curve No: S119V1 Blackmer System One Pump Size: 3x 13 Pump Performance Characteristics Pump Size: x1 33 Effective Date: Jan/5 Catalog: 131 Speed: 175 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

5 15 1 7 5 3 13. in. in 11. in 1. in 9. in 9 57 5 71 7 75 75 7 71 5 5 1 9. in 1. in 11. in. in 13. in 1...... 5 1 15 5 3 35 5 5 55 1 3 5 7 9 1 11 13 Curve No: SV1 Blackmer System One Pump Size: 3x 13 Pump Performance Characteristics Pump Size: x1 33 Effective Date: Jan/5 Catalog: 131 Speed: 115 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

5 1 1 13. in. in 5 71 77 1 3 3 1 11. in 1. in 1 77 3 1 9. in 71 1 3 1 3 13. in. in 11. in 1. in 9. in 3 15 9. in 13. in 1, 1, 1, 1, 1 1 1 1 3 3 3 3 3 Curve No: SV1 Blackmer System One Pump Size: x 13 Pump Performance Characteristics Pump Size: 1 15 33 Effective Date: Jan/5 Catalog: 131 Speed: 175 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

5 15 1 7 5 3 13. in. in 11. in 1. in 9. in 53 1 9 7 7 79 79 7 7 9 5 1 1 9. in 1. in 11. in. in 13. in 1...... 1, 1, 1 1 1 1 Curve No: SV1 Blackmer System One Pump Size: x 13 Pump Performance Characteristics Pump Size: 1 15 33 Effective Date: Jan/5 Catalog: 131 Speed: 115 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

7 5 3 mm 5 59 5 9 7 15 17 mm 7 9 1 3 15 mm 5 5 1 3 5 15 1 5 15 mm 17 mm 3 mm 1 1 3 5 7 9 1 11 5 1 15 5 3 35 5 5 Curve No: S113V1 Blackmer System One Pump Size: 5x Pump Performance Characteristics Pump Size: x3 Effective Date: Jan/5 Catalog: 131 Speed: 9 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

1 5 1 1 3 mm 17 mm 5 53 59 7 7 3 1 15 mm 59 1 3..5. 1.5 1..5. 1. 1.. 15 mm 17 mm 3 mm.. 5 1 15 5 3 35 5 5 55 1 1 1 1 Curve No: S115V1 Blackmer System One Pump Size: 5x Pump Performance Characteristics Pump Size: x3 Effective Date: Jan/5 Catalog: 131 Speed: 15 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

5.. 15. 1.. 7.. 5... 3. 3 mm 17 mm 15 mm 5 59 7 59 7. 5. 1.... 1... 3 mm.... 15 mm 17 mm.. 1 1 1 1 1 3 3 3 3 1 3 5 7 9 1 11 13 1 15 Curve No: S117V1 Blackmer System One Pump Size: 5x Pump Performance Characteristics Pump Size: x3 Effective Date: Jan/5 Catalog: 131 Speed: 9 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

7 5 3 mm 9 5 7 73 7 77 15 17 mm 77 7 73 1 3 15 mm 7 5 5 1 3 3 mm 5 15 1 15 mm 17 mm 5 1 1 3 5 7 9 1 11 13 1 15 1 5 1 15 5 3 35 5 5 55 5 7 Curve No: S119V1 Blackmer System One Pump Size: x1 Pump Performance Characteristics Pump Size: 3x Effective Date: Jan/5 Catalog: 131 Speed: 9 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

1 5 3 1 1 1 3 mm 17 mm 15 mm 5 71 75 7 7 75 71 1 3 3 mm 3 1 15 mm 17 mm 1 5 1 15 5 3 35 5 5 55 5 7 75 1 1 1 1 3 3 3 Curve No: S1151V1 Blackmer System One Pump Size: x1 Pump Performance Characteristics Pump Size: 3x Effective Date: Jan/5 Catalog: 131 Speed: 15 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

5... 7.. 3 mm 5 5 71 7 75 5. 17 mm 75 7 15. 1... 3. 15 mm 5 71. 5. 1.... 1. 1. 1. 3 mm... 15 mm 17 mm... 1... 3 mm 15 mm.. 5 1 15 5 3 35 5 5 55 1 1 1 1 Curve No: S1153V1 Blackmer System One Pump Size: x1 Pump Performance Characteristics Pump Size: 3x Effective Date: Jan/5 Catalog: 131 Speed: 9 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

1 3 5 9 7 mm 9 mm 3 mm 3 7 9 5 5 9 7 15 5 17 mm 15 mm 1 3 5 1 5 15 1 5 1 15 mm 17 mm 3 mm 9 mm mm mm 15 mm 5 1 15 5 3 35 5 5 55 1 1 1 1 Curve No: S1155V1 Blackmer System One Pump Size: 5x5 5 Pump Performance Characteristics Pump Size: 1x 1 Effective Date: Jan/5 Catalog: 131 Speed: 9 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

7 7 5 1 1 15 mm 9 mm 3 mm 17 mm 3 35 1 7 7 3 9 15 mm 1 1 3 3...5 mm. 1.5 1..5 1. 15 mm 17 mm 3 mm 9 mm.. 3.. 1.. 1. mm.5 15 mm. 1 1 1 1 1 3 5 7 9 1 Curve No: S1157V1 Blackmer System One Pump Size: 5x5 5 Pump Performance Characteristics Pump Size: 1x 1 Effective Date: Jan/5 Catalog: 131 Speed: 15 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

1. 3. 5. 9.. 7. mm 9 mm 3 mm 3 3 1 7 7.. 15. 5.. 17 mm 15 mm 1 1. 3. 5.. 1..... mm. 9 mm...3 15 mm 17 mm 3 mm.. 1. 1.....3 mm 15 mm. 1 3 5 7 9 1 11 13 1 15 1 5 1 15 5 3 35 5 5 55 5 7 Curve No: S1159V1 Blackmer System One Pump Size: 5x5 5 Pump Performance Characteristics Pump Size: 1x 1 Effective Date: Jan/5 Catalog: 131 Speed: 9 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

1 3 5 9 7 mm 9 mm 3 mm 5 5 1 1 5 5 15 5 17 mm 15 mm 1 3 5 1 3 1 7 1 9 15 mm 17 mm 3 mm 9 mm mm 1 5 1 15 5 3 35 5 5 55 5 7 75 5 9 1 1 1 3 3 3 Curve No: S111V1 Blackmer System One Pump Size: x 5 Pump Performance Characteristics Pump Size: 1.5x3 1 Effective Date: Jan/5 Catalog: 131 Speed: 9 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

7 7 1 mm 9 mm 1 7 5 5 59 1 3 mm 59 5 5 15 17 mm 5 7 3 9 15 mm 1 3. 3. mm 3.. 1.. 1.. 15 mm 17 mm 3 mm 9 mm..... 1... 5 1 15 5 3 35 5 5 1 1 1 1 Curve No: S113V1 Blackmer System One Pump Size: x 5 Pump Performance Characteristics Pump Size: 1.5x3 1 Effective Date: Jan/5 Catalog: 131 Speed: 15 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

35 3 11 1 9 mm 9 mm 53 5 59 5 7 3 mm 59 5 53 15 5 17 mm 15 mm 1 3 5 1 1... 1..5 15 mm 17 mm 3 mm 9 mm mm... 1..... 1 1 1 1 3 1 3 5 7 9 1 11 13 Curve No: S115V1 Blackmer System One Pump Size: x 5 Pump Performance Characteristics Pump Size: 1.5x3 1 Effective Date: Jan/5 Catalog: 131 Speed: 9 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

1 3 5 9 7 mm 9 mm 3 mm 7 5 1 9 71 71 9 1 15 1 5 3 17 mm 15 mm 5 5 1 3 mm 3 1 1 15 mm 17 mm 3 mm 9 mm 5 15 3 15 1 3 5 7 9 1 11 13 5 1 15 5 3 35 5 5 55 Curve No: S117V1 Blackmer System One Pump Size: 5x 5 Pump Performance Characteristics Pump Size: x3 1 Effective Date: Jan/5 Catalog: 131 Speed: 9 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

7 7 1 1 mm 9 mm 3 mm 53 7 7 5 15 17 mm 3 9 15 mm 53 1 3 5.. mm. 9 mm 3... 17 mm 3 mm 1. 15 mm......... 5 1 15 5 3 35 5 5 55 1 1 1 1 Curve No: S119V1 Blackmer System One Pump Size: 5x 5 Pump Performance Characteristics Pump Size: x3 1 Effective Date: Jan/5 Catalog: 131 Speed: 15 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

35 11 3 5 1 9 7 mm 9 mm 3 mm 7 5 5 7 7 5 15 5 17 mm 15 mm 5 1 3 7 5 1 1. 1. 1. 9 mm mm... 15 mm 17 mm 3 mm..... 1... 1 1 1 1 3 3 3 3 3 1 3 5 7 9 1 11 13 1 15 1 17 Curve No: S1171V1 Blackmer System One Pump Size: 5x 5 Pump Performance Characteristics Pump Size: x3 1 Effective Date: Jan/5 Catalog: 131 Speed: 9 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

1 3 5 9 7 mm 9 mm 3 mm 5 5 73 7 7 73 15 5 17 mm 1 3 15 mm 5 5 1 5 3 17 mm 3 mm 9 mm mm 1 15 mm 3 1 1 5 1 1 1 1 5 1 15 5 3 35 5 5 55 5 7 75 5 9 95 Curve No: S1173V1 Blackmer System One Pump Size: x1 5 Pump Performance Characteristics Pump Size: 3x 1 Effective Date: Jan/5 Catalog: 131 Speed: 9 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

. 7.. 5. 1. 1. 15. mm 9 mm 3 mm 5 7 7 7 75 75 7 7 7.. 17 mm 3. 9. 15 mm.. 1. 3..... mm. 9 mm.. 3. 15 mm 17 mm 3 mm.. 9.. 3.. 3. mm. 1. 15 mm. 1 3 5 7 9 1 11 5 1 15 5 3 35 5 5 Curve No: S1175V1 Blackmer System One Pump Size: x1 5 Pump Performance Characteristics Pump Size: 3x 1 Effective Date: Jan/5 Catalog: 131 Speed: 15 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

1. 3. 5.. 9.. 7.. mm 9 mm 3 mm 53 7 71 7 75 75 7 71 7 15. 1. 5.. 3. 17 mm 15 mm 5.. 1....5.. 1.5 1..5. 1.. 15 mm 17 mm 3 mm 9 mm mm..... mm 1. 15 mm. 5 1 15 5 3 35 5 5 55 5 7 75 1 1 1 1 3 3 Curve No: S1177V1 Blackmer System One Pump Size: x1 5 Pump Performance Characteristics Pump Size: 3x 1 Effective Date: Jan/5 Catalog: 131 Speed: 9 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

7 5 1 1 1 mm 9 mm 9 7 7 7 3 1 3 mm 1 1 3 mm 9 mm mm 9.. 3.. 3. mm 1.5. 1 1 1 1 1 3 5 7 9 1 Curve No: S111V1 Blackmer System One Pump Size: 1x15 5 Pump Performance Characteristics Pump Size: x 1 Effective Date: Jan/5 Catalog: 131 Speed: 15 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

1 3 5 9 7 mm 9 mm 7 7 3 5 5 3 7 15 5 3 mm 1 3 5 1. 3. mm 3.. 1. 1. 3 mm 9 mm.. 1.... mm.9. 1 3 5 7 9 1 11 13 1 15 1 5 1 15 5 3 35 5 5 55 5 7 Curve No: S113V1 Blackmer System One Pump Size: 1x15 5 Pump Performance Characteristics Pump Size: x 1 Effective Date: Jan/5 Catalog: 131 Speed: 9 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

1 5 1 1 33 mm 35 mm 79 mm 35 3 51 57 1 1 57 3 1 5 mm 9 mm 51 1 33 mm 35 mm 3 9 mm 5 mm 79 mm 1 33 mm 1 3 5 7 9 1 11 13 5 1 15 5 3 35 5 5 55 Curve No: S115V1 Blackmer System One Pump Size: x 33 Pump Performance Characteristics Pump Size: 1.5x3 13 Effective Date: Jan/5 Catalog: 131 Speed: 9 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

1 1 3 3 33 mm 35 mm 79 mm 35 5 55 5 5 55 1 5 mm 9 mm 5 1 9 mm 5 mm 79 mm 35 mm 33 mm.5 3. 1.5. 1.5 33 mm.. 5 1 15 5 3 35 5 5 55 5 1 1 1 1 Curve No: S117V1 Blackmer System One Pump Size: x 33 Pump Performance Characteristics Pump Size: 1.5x3 13 Effective Date: Jan/5 Catalog: 131 Speed: 15 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

.. 5.. 3. 1. 1. 1.. 1.. 33 mm 35 mm 79 mm 5 mm 9 mm 35 5 55 5 5 5 55.. 1...... 3. 3.. 1. 1. 9 mm 5 mm 79 mm 35 mm 33 mm... 1... 33 mm.. 5 1 15 5 3 35 5 1 3 5 7 9 1 11 13 1 1 17 19 Curve No: S119V1 Blackmer System One Pump Size: x 33 Pump Performance Characteristics Pump Size: 1.5x3 13 Effective Date: Jan/5 Catalog: 131 Speed: 9 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

15 5 35 3 135 15 9 35 mm 79 mm 5 mm 1 5 57 7 7 5 75 9 mm 15 5 1 3 5 15 7 35 mm 3 9 mm 5 mm 79 mm 35 5 1 35 mm 9 mm 1 3 5 7 9 1 11 13 1 15 1 17 1 5 1 15 5 3 35 5 5 55 5 7 75 Curve No: S1191V1 Blackmer System One Pump Size: 5x 33 Pump Performance Characteristics Pump Size: x3 13 Effective Date: Jan/5 Catalog: 131 Speed: 9 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

1 3 3 33 mm 35 mm 79 mm 5 5 5 mm 3 1 9 mm 1 5 mm 9 mm 79 mm 35 mm 33 mm 5 1 15 5 3 35 5 5 55 5 7 75 5 9 95 1 1 1 1 3 3 3 Curve No: S1193V1 Blackmer System One Pump Size: 5x 33 Pump Performance Characteristics Pump Size: x3 13 Effective Date: Jan/5 Catalog: 131 Speed: 15 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

1 5 1 1 33 mm 35 mm 51 5 3 1 79 mm 5 mm 9 mm 3 1. 3. 33 mm 3.. 1. 1. 35 mm 79 mm 5 mm 9 mm..... 1... 5 1 15 5 3 35 5 5 55 5 1 1 1 1 Curve No: S1195V1 Blackmer System One Pump Size: 5x 33 Pump Performance Characteristics Pump Size: x3 13 Effective Date: Jan/5 Catalog: 131 Speed: 9 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

135 35 3 15 9 79 mm 5 mm 55 3 7 7 75 75 7 5 75 9 mm 7 15 5 1 3 5 15 1 79 mm 9 mm 5 mm 1 1 1 1 1 1 3 5 7 9 1 11 Curve No: S1197V1 Blackmer System One Pump Size: 5x 33 Pump Performance Characteristics Pump Size: x3 13 Effective Date: Jan/5 Catalog: 131 Speed: 9 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

1 1 3 3 33 mm 35 mm 79 mm 9 57 5 71 7 7 7 7 71 1 5 mm 9 mm 5 1 33 mm 15 1 5 9 9 mm 5 mm 79 mm 35 mm 1 3 5 7 9 1 11 13 1 15 1 17 5 1 15 5 3 35 5 5 55 5 7 Curve No: S1199V1 Blackmer System One Pump Size: x1 33 Pump Performance Characteristics Pump Size: 3x 13 Effective Date: Jan/5 Catalog: 131 Speed: 15 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

1 5 3 1 1 1 33 mm 35 mm 79 mm 5 mm 9 mm 9 57 5 71 7 7 7 7 71 5 1... 33 mm.. 3. 9 mm 5 mm 79 mm 35 mm....... 1.. 1 3 5 7 9 1 11 5 1 15 5 3 35 5 5 Curve No: S1V1 Blackmer System One Pump Size: x1 33 Pump Performance Characteristics Pump Size: 3x 13 Effective Date: Jan/5 Catalog: 131 Speed: 9 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

1 3 33 mm 35 mm 5 9 7 77 7 1 3 79 mm 7 77 7 1 5 mm 9 mm 9 3 1 3 15 9 mm 5 mm 79 mm 35 mm 33 mm 9 mm 33 mm 1 1 1 1 3 3 3 3 1 3 5 7 9 1 11 13 15 Curve No: S5V1 Blackmer System One Pump Size: 1 15 33 Pump Performance Characteristics Pump Size: x 13 Effective Date: Jan/5 Catalog: 131 Speed: 15 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

1 5 3 1 1 1 33 mm 35 mm 79 mm 5 mm 9 mm 5 7 77 7 7 77 7 1 1 33 mm 5 9 mm 5 mm 79 mm 35 mm 1 1 1 1 1 5 1 15 5 3 35 5 5 55 5 7 75 5 9 95 Curve No: S7V1 Blackmer System One Pump Size: 1 15 33 Pump Performance Characteristics Pump Size: x 13 Effective Date: Jan/5 Catalog: 131 Speed: 9 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

System One Frame M Pump (ASME/ANSI) Construction Construction Engineered Reliability: The System One Frame M incorporates proven design features that provide maximum reliability and longlife for the most demanding applications. Unparalleled design matched with the best warranty in the industry make the System One Frame M the most cost effective pumping system available. 1 7 3 5 (Optional oil temperature monitor shown) 9 3 11 1 1 Patented micrometer adjustment nuts (pat. #,39,9) fine tune impeller setting for maximum efficiency. Solid shaft (no sleeve) with L 3 /D ratio of 19 is the lowest for any process pump in this size range. 3 Patented non-wearing labyrinth seals (pat. #,57,517) provide unparalleled protection of oil and bearings. Ultra-high capacity angular contact thrust bearings (731 pr.) provide shaft rigidity and eliminate axial movement even during off BEP operation. 5 Bolted retainer cover provides positive clamping of thrust bearing and prevents axial shaft movement. Rabbet for C-Frame (NEMA) or D-Flange (IEC) motor adaptor provides for automatic mechanical motor alignment without special tools or excessive labor. Accepts motor frame sizes up to 9TSC or 315L. 1 SpiralTrac is a registered trademark of the manufacturer, EnviroSeal Engineering Products Ltd., Waverly, Nova Scotia. 7 Cast-in cooling fins and large oil reservoir enhance heat transfer and promote oil cooling. Finned cooling coil available for high temperature applications. Large oil sight glass enables instant analysis of oil level and condition. 9 Oversized radial bearing (31) provides greater load carrying capabilities and extended bearing life in even the harshest conditions. 1 Large volume seal chamber provides proper cooling and lubrication to seal faces. Available in straight and taper bore to meet all applications. Accepts all standard mechanical seals. Throat bushing options include carbon, polyurethane or SpiralTrac 1. 11 Double volute construction reduces hydraulic forces within the casing thus lowering radial load on the shaft and bearings. High efficiency wet ends help reduce energy costs. Blackmer 19 Century Avenue SW, Grand Rapids, MI 953-153 USA T 1.1.111 F 1.1.375 www.blackmer.com 117

System One Frame M Dimensions Frame M Pump (ASME/ANSI) Frame M Pump (Metric) 33.75 A 1 5 A 1. 15 V X V X O O U D U D F H (hole) A F H (hole) A E E 1 E E 1 Frame M Pump ASME/ANSI Pump Size A 1 A D E 1 E F H O U V X 1 x -13 5.5 1. 1.5 1. 9. 1.75.75 3.5.375. 1 x -15 7.5 1.75 1.5 1. 9. 1.75.75 3.5.375. 1 3 x 1-13 7.5 15.5 1.5 1. 9. 1.75.75 3.5.375. 1 x 1-15.75 15.75 1.5 1. 9. 1.75.75 33.5.375. 19 All dimensions are in inches. Frame M Pump Metric Pump Size A 1 A D E 1 E F H O U V X 1 15 x -33 35 3 9 7 775 15 x -3 9 375 3 9 7 57 3 x 5-33 9 37 3 9 7 57 x 5-33 73 3 9 7 51 3 All dimensions are in millimeters. Optional centerline mount for high temperature applications Optional left or right side discharge Blackmer 19 Century Avenue SW, Grand Rapids, MI 953-153 USA T 1.1.111 F 1.1.375 www.blackmer.com 11

System One Pumps Design Data - Frame M (ANSI) System One Pumps Design Data FRAME M (ANSI) x-13 Shaft L3/D Ratio 17.9 (.7) 17. (.3) 19.5 (.9) 19.55 (.9) Diameter at Impeller 1.5-UN (3) Diameter at Seal.5 (.7) Diameter Between Bearings 3.5 (.) Diameter at Coupling.375 (.3) Bearings Thrust 731 BEGAY Thrust Option N/A Radial 31 C3 Bearing Span 1.53 (7) Shaft Overhang 9.9 (1) 9.35 (37) 9. (9) 9.75 () Seal Chamber Standard Taper Seal Bore Diameter (nose) 3.7 (9) 3.7 (9) Inside Bore.5 (15).5 Minimum (15) Depth.5 (5) 3.5 (9) Back Cover/Shaft Clearance. (Radial) (.5).75 (Radial) (19) Gland Bolting X.5-11UNC n 5.75 Bolt Circle Diameter (1 on 1 AC) Distance to Nearest Obstruction 3.13 (79.5) Clearance. Total.15 Suction Side (1.5 total. Suction Side) Eye Area sq. in. (cm ) 5 (9) 5 (3) (37) 3 () Maximum Dia. Solids 1. (5) 1.13 (9) 1.5 (3) 1.19 (3) Number of Vanes 5 Pumps Weights lbs (kg)vanes Pump Only 55 (5) 1 (7) 57 (9) 73 (39) CasingVanes Type Double Volute Wall Thickness.75 Minimum (19) Maximum Working Pressure See Pressure vs.temperature Limit Chart Test pressure Class 15 Flanges-5PSIG, Class 3 Flanges-5PSIG Rotating Element Wk Dry lbs/ft (kg-m ) 3. (.15).9 (.) 5.75 (.) 7.5 (.31) Wk Wet lbs/ft (kg-m ) 5.19 (.1).91 (.9).11 (.31) 1. (.5) Maximum Speed (oil lube) RPM Power Limits HP (KW)/1 RPM 31SS 1.5 (1.5) Reference drawings A1, A11 x-15 Inches (mm) x1-13 x1-15 Cylindrical Bore Large seal chamber volume provides optimum volume for seal lubrication and cooling. Cast restriction bushing reduces fluid exchange between casing and seal chamber and allows maximum cooling of fluid. Other bushing options are available including carbon and SpiralTrac. SpiralTrac is a registered trademark of the manufacturer, EnviroSeal Engineering Products Ltd., Waverly, Nova Scotia. Two industry- tested seal chamber designs provide the right seal environment for virtually any process application. Large volume seal chambers accept standard sized glands. Available seal chamber jackets provide optimum cooling or heating of seal chamber fluid to maximize seal life. Taper Bore Vortex breakers alter seal chamber flow patterns to move solids out and away from the seal. Air or gas buildup can be detrimental to seal life. Taper design allows trapped air and gases to escape. Blackmer 19 Century Avenue SW, Grand Rapids, MI 953-153 USA T 1.1.111 F 1.1.375 www.blackmer.com 119

System One Pump Assembly and Parts List - Frame M NO. ITEM NO. ITEM NO. ITEM 1 Casing Flinger 13 Oil Sight Glass Impeller Micrometer Nut Foot, Bearing Frame Shaft 9 Lockwasher, Thrust Bearing 3 Stud, Cartridge 11 Back Cover 71 Frame Adapter Locknut, Cartridge 1 C Frame motor Adapter 73A Gasket, Casing 5 O-Ring, Cartridge 1 Bearing, Radial MechanicalSeal Oil Filler Assembly 1 Bearing, Thrust 9B Seal, Labyrinth Rotor,Thrust 13 Bolt, Eye 19 Bearing, Frame 9C Seal, Labyrinth Rotor O-ring,Thrust 1 Plug, Magnetic Locknut, Thrust Bearing 9D Seal, Labyrinth Stator, Radial 33 Plug, Bearing Frame 33 Bearing Cartridge 9E Seal, Labyrinth Rotor, Radial 35 Plug, Casing 35 Retainer Cover 9F Seal, Labyrinth Rotor O-ring,Radial 3 O-ring, Impeller Hub 9G Seal, Labyrinth Stator O-ring,Radial Blackmer 19 Century Avenue SW, Grand Rapids, MI 953-153 USA T 1.1.111 F 1.1.375 www.blackmer.com

System One Auxiliary Pipe Connections List - Frame M Discharge V VI IV Suction II III I XI X VII ITEM NPT NUMBER CONNECTION NUMBER SIZE OF TAPS I.5-1 1 Casing Drain II.5-1 1 Discharge Gage * III.5-1 1 Suction Gage IV.5-1 Seal Chamber Flush V.75-1 1 Oil Fill * VI.5-1 Seal Chamber Jacket inlet & outlet # VII 1.-11.5 1 Oil Sight Glass # X.5-1 1 Oil Drain ## XI.5-1 Plug or (cooling coil*) *Optional # Left side of pump facing suction end ## Right side of pump facing suction end Blackmer 19 Century Avenue SW, Grand Rapids, MI 953-153 USA T 1.1.111 F 1.1.375 www.blackmer.com 1

System One Frame M Composite Pump Curves Frame M Pump (ASME/ANSI) Frame M Pump (Metric) Frame M Pump ASME/ANSI Pump Size All dimensions are in inches. A 1 A D E 1 E F H O U V X 1 x -13 5.5 1. 1.5 1. 9. 1.75.75 3.5.375. 1 x -15 7.5 1.75 1.5 1. 9. 1.75.75 3.5.375. 1 3 x 1-13 7.5 15.5 1.5 1. 9. 1.75.75 3.5.375. 1 x 1-15.75 15.75 1.5 1. 9. 1.75.75 33.5.375. 19 Frame M Pump Metric Pump Size All dimensions are in millimeters. A 1 A D E 1 E F H O U V X 1 15 x -33 35 3 9 7 775 15 x -3 9 375 3 9 7 57 3 x 5-33 9 37 3 9 7 57 x 5-33 73 3 9 7 51 3 Blackmer 19 Century Avenue SW, Grand Rapids, MI 953-153 USA T 1.1.111 F 1.1.375 www.blackmer.com

5 3 1 1 1 1 13. in. in 11. in 1. in 53 9 7 77 7 7 77 7 9 1 1 13. in 5 1. in 11. in. in 9 3 3 15 1, 1,,,, 5 1 15 5 3 35 5 5 55 5 Curve No: S1V1 Blackmer System One Pump Size: x 13 Pump Performance Characteristics Effective Date: Jan/5 Catalog: 131 Speed: 175 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

7 13. in. in 5 9 7 77 7 15 5 11. in 7 77 7 1 3 1. in 9 5 1 1 1. in 11. in. in 13. in 3 1 1 5 1, 1,,, 5 1 15 5 3 35 5 5 Curve No: SV1 Blackmer System One Pump Size: x 13 Pump Performance Characteristics Effective Date: Jan/5 Catalog: 131 Speed: 115 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

1 13. in Head m 5 3 Head ft 1 1 1. in 11. in 1.5 in 53 3 7 7 3 3 7 7 1 Power kw Power hp 9 3 11. in 1.5 in. in 13. in NPSHr m NPSHr ft 1,, 3,, 5, Capacity USgpm 1 3 5 7 9 1 11 Capacity m3/h Curve No: S1V1 Blackmer System One Pump Size: x1 13 Pump Performance Characteristics Effective Date: Jan/5 Catalog: 131 Speed: 175 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 fax: 1 1 375 www.blackmer.com

5 13. in 7 5. in 11. in 53 73 79 Head m 15 1 Head ft 3 1.5 in 79 73 5 1 13. in Power kw 1 Power hp 11. in 1.5 in. in NPSHr m 3 NPSHr ft 1 1, 1,,,, 3, Capacity USgpm 5 1 15 5 3 35 5 5 55 5 7 Capacity m3/h Curve No: S1V1 Blackmer System One Pump Size: x1 13 Pump Performance Characteristics Effective Date: Jan/5 Catalog: 131 Speed: 115 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 fax: 1 1 375 www.blackmer.com

7 7 5 3 1 1 15 9 15. in 1. in 13. in. in 11. in 5 1 7 7 1 7 1 1 3 1 15. in. in 11. in 13. in 1. in 1, 1,,,, 3, 5 1 15 5 3 35 5 5 55 5 7 Curve No: SV1 Blackmer System One Pump Size: x 15 Pump Performance Characteristics Effective Date: Jan/5 Catalog: 131 Speed: 175 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

11 3 1 9 15. in 1. in 5 7 7 1 5 13. in 1 15 7 5. in 11. in 7 1 3 7 5 1 3 1 15. in 1. in 13. in. in 11. in 15 3 1, 1,, 1 3 3 Curve No: SV1 Blackmer System One Pump Size: x 15 Pump Performance Characteristics Effective Date: Jan/5 Catalog: 131 Speed: 115 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

9 3 7 15. in 7 5 3 1 1 15 9 1. in 13. in. in 51 1 71 7 3 1 7 71 1 3 1. in 15. in 1 13. in. in 9 3 3 15 1,, 3,, 5, 1 3 5 7 9 1 11 Curve No: SV1 Blackmer System One Pump Size: x1 15 Pump Performance Characteristics Effective Date: Jan/5 Catalog: 131 Speed: 175 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

135 35 3 5 15 9 75 15. in 1. in 13. in. in 5 71 7 3 7 15 5 71 1 5 3 15 15. in 3 1 13. in. in 1. in 15 3 1, 1,,,, 3, 5 1 15 5 3 35 5 5 55 5 7 Curve No: S3V1 Blackmer System One Pump Size: x1 15 Pump Performance Characteristics Effective Date: Jan/5 Catalog: 131 Speed: 115 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

1 3 3 33 mm 35 mm 5 9 7 77 7 1 79 mm 5 mm 7 77 7 9 5 33 mm 3 1 5 mm 79 mm 35 mm 1 3 5 1 15 5 3 35 5 5 55 1 1 1 1 Curve No: S11V1 Blackmer System One Pump Size: x 13 Pump Performance Characteristics Effective Date: Jan/5 Catalog: 131 Speed: 15 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

1 5 3 1 1 1 33 mm 35 mm 79 mm 5 mm 55 3 9 7 77 7 55 7 77 7 3 9 1 1 33 mm 15 1 5 5 mm 79 mm 35 mm 1 5 1 15 5 3 35 5 5 1 1 1 1 Curve No: S13V1 Blackmer System One Pump Size: x 13 Pump Performance Characteristics Effective Date: Jan/5 Catalog: 131 Speed: 9 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

3 33 mm Head ft 1 Head m 3 1 35 mm 79 mm 17 mm 55 73 7 1 1 73 7 5 33 mm Power hp Power kw 3 15 79 mm 17 mm 35 mm NPSHr ft 1 NPSHr m 3 5 1 15 5 3 35 5 5 55 5 7 75 5 9 Capacity m3/h 1 3 3 Capacity USgpm Curve No: S17V1 Blackmer System One Pump Size: x1 13 Pump Performance Characteristics Effective Date: Jan/5 Catalog: 131 Speed: 15 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 fax: 1 1 375 www.blackmer.com

1 Head ft 5 3 Head m 1 1 1 33 mm 35 mm 79 mm 7 mm 53 3 7 7 3 3 7 7 1 1 33 mm Power hp 15 1 5 Power kw 79 mm 7 mm 35 mm NPSHr ft NPSHr m 5 1 15 5 3 35 5 5 55 Capacity m3/h 1 1 1 1 Capacity USgpm Curve No: S19V1 Blackmer System One Pump Size: x1 13 Pump Performance Characteristics Effective Date: Jan/5 Catalog: 131 Speed: 9 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 fax: 1 1 375 www.blackmer.com

1 1 1 5 5 35 3 31 mm 35 mm 33 mm 35 mm 55 71 77 77 5 79 mm 71 15 1 5 31 mm 3 1 79 mm 35 mm 33 mm 35 mm 1 5 1 15 5 3 35 5 5 55 5 1 1 1 1 Curve No: S3V1 Blackmer System One Pump Size: x 15 Pump Performance Characteristics Effective Date: Jan/5 Catalog: 131 Speed: 15 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

7 5 3 1 1 1 1 31 mm 35 mm 33 mm 35 mm 79 mm 5 7 77 77 7 1 5 15 1 5 1 35 mm 79 mm 35 mm 33 mm 31 mm 5 1 15 5 3 35 5 5 1 1 1 1 Curve No: S5V1 Blackmer System One Pump Size: x 15 Pump Performance Characteristics Effective Date: Jan/5 Catalog: 131 Speed: 9 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

5 31 mm Head ft 15 1 Head m 3 35 mm 33 mm 35 mm 5 3 7 7 3 7 7 5 1 1 31 mm Power hp Power kw 33 mm 35 mm 35 mm NPSHr ft 1 NPSHr m 5 1 15 5 3 35 5 5 55 5 7 75 5 Capacity m3/h 1 3 3 Capacity USgpm Curve No: S9V1 Blackmer System One Pump Size: x1 15 Pump Performance Characteristics Effective Date: Jan/5 Catalog: 131 Speed: 15 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 fax: 1 1 375 www.blackmer.com

7 5 1 1 1 31 mm 35 mm 33 mm 35 mm 53 3 7 79 3 5 79 3 1 7 1 3 5 15 1 35 mm 33 mm 35 mm 31 mm 5 5 1 15 5 3 35 5 5 55 1 1 1 1 Curve No: S31V1 Blackmer System One Pump Size: x1 15 Pump Performance Characteristics Effective Date: Jan/5 Catalog: 131 Speed: 9 rpm Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

System One Vortex Pump Construction Construction Frame A and LD17 Pump with vortex casing and impeller handling sludges and slurries with large particle solids. *Both ASME/ANSI & IPP Metric flanges available. Provides a solution to difficult pumping problems such as sludges and slurries with large particle solids, materials with entrained air, stringy or fibrous materials. Frame A 5 Designed to fit the standard System One and LD17 power ends and includes all the features and benefits of our System One pump. 1 LD17 3 7 9 (Optional oil temperature monitor shown) 1 3 5 LD17 shaft LD17 power end Back cover/seal chamber Taper bore provided on LD17. Straight bore with cast restriction bushing or open taper configurations available for Frame A. Vortex impeller recessed out of passageway. Vortex casing Removable suction cover Also available in Frame A (see circle inset above and System One Frame A Pump section for details of Power End). 7 Optional spacer flange allows removal of separate suction cover for cleanout without disturbing piping. Solids are drawn into the vortex of swirling liquid and are discharged by centrifugal force through the open area of the casing with minimum impeller contact for minor particle degradation. 9 Suction and discharge passageways are one continuous open area. " pump can pass a " (5 mm) solid 3" pump can pass a 3" (75 mm) solid " pump can pass a " (1 mm) solid Blackmer 19 Century Avenue SW, Grand Rapids, MI 953-153 USA T 1.1.111 F 1.1.375 www.blackmer.com 139

System One Vortex Pump Dimensions Vortex Pump (FRAME A & LD17) Vortex Pump (Metric Flange) V =.19 C CP Y SW A 1 E V = 55. C CP Y SW A 1 E X X O O U = 1.37 D U = 3. D F A F A E 1 E 1 E E E E E 1 E 1 Vortex Pump Frame A & LD17 Pump Size CP FrA CP LD17 C FrA C LD17 Y X E D O F FrA SW dim. indicates width of optional spacer flange. All dimensions are in inches. F LD17 A A 1 E 1 E SW 1 x - 5..93 1. 1.93. 7.75.37.5 1. 1. 11.93 11.5 15.5 7.5 7.5 1. 3 x 3-1 7.1.9.5 19.7. 9.5 5.5 1. 19.5 15.5.9 13.75 19.5 7. 7.5 1. 3 x - 9.3.9 3. 1.19 5.5 11.5.5 1. 1.5 1.3 1.1 1.5. 9. 7.5 1.3 Vortex Pump Metric Flange Pump Size CP CP C C FrA LD17 FrA LD17 Y X E D O FF F FrA LD17 A A 1 E 1 E SW 1 5 x 5-51 5 55 1 1 195 111 3 33 5 37 191 15 5 x -5 9 573 55 117 1 1 5 95 39 37 35 9 11 15 3 1 x 1-3 7 7 53 1 9 15 5 5 7 359 559 5 15 35 SW dim. indicates width of optional spacer flange. All dimensions are in millimeters. Designed for difficult pumping problems such as: Sludges and slurries with large solids Pumped materials with entrained air Pumped fluids with stringy or fibrous materials Minimum product shearing Especially suited for the following industries: Waste treatment Food and chemical processing Pulp and paper Agriculture Blackmer 19 Century Avenue SW, Grand Rapids, MI 953-153 USA T 1.1.111 F 1.1.375 www.blackmer.com 1

System One Pumps Design Data - Vortex Pump System One Vortex Pump NON-CLOGGING RECESSED IMPELLER Designed for: WASTE TREATMENT FOOD & CHEMICAL PROCESSING PULP & PAPER AGRICULTURE and other industries pumping difficult materials VERTICAL VORTEX PUMP System One Pumps Design Data VORTEX ANSI. x.- 3. x 3.-1. x.- Shaft L3/D Ratio FRAME A 1 (.3) (.) 75 (.9) L3/D Ratio LD17 1 (.) 3 (.) (1.) Diameter at Impeller 1. (7) 1.- UNF Thread Diameter at Seal 1.75 (7.3) Diameter Between Bearings.5 () Diameter at Coupling 1.375 (3.93) Bearings Thrust SKF 731 BEGAY (pair) Radial 31 C3 Bearing Span. (153) Shaft Overhang FRAME A 9.11 (31) 9.5 (35) 9.73 (7) Shaft Overhang LD17. (13).5 (17) 7. (179) Seal Chamber Seal Bore Diameter (nose).9 () nose Inside Bore FRAME A 3.75 (95) LD17 3. (7) Depth FRAME A. (73) LD17. (51) Back Cover/Shaft Clearance FRAME A. (3) Diametral LD17 Open 5 degree Taper Gland Bolting FRAME A ANSI X.5-13UNC on.75 B.C. ( on 1 B.C.) Gland Bolting LD17 X.5-13UNC on. B.C. ( on 117 B.C.) Distance to Nearest Obstruction FRAME A 3. (7) LD17.19 (5) Clearance.5 (1.3) Back of Impeller Maximum Diameter Solids. (51) 3. (7). () Number of Vanes Pumps Weights/Lbs. (kg) Pump Only 3 (13) 357 (1) 7 (11) Casing Type Single Volute Wall Thickness. (11) Minimum Maximum Working Pressure See Pressure vs.temperature Limit Chart Test pressure Class 15 Flanges-5PSIG, Class 3 Flanges-5PSIG Rotating Element Maximum Speed (oil lube) 175 175 175 Power Limits HP (KW)/1 RPM 31SS 3. (.) Reference Drawings A1, A11 Blackmer 19 Century Avenue SW, Grand Rapids, MI 953-153 USA T 1.1.111 F 1.1.375 www.blackmer.com 11

System One Vortex Pump Assembly and Parts List - Frame LD17 LD17 NO. ITEM NO. ITEM NO. ITEM 1 Casing Key, Coupling 9E Seal, Labyrinth Rotor,(Radial) Impeller Flinger 9F Seal, Labyrinth O-Ring (Radial) Shaft Micrometer Nut 13 Oil Sight Glass 9 Suction Cover 9 Lockwasher, Thrust Bearing Foot, Bearing Frame 11 Back Cover 71 Frame Adapter 1 Foot, casing 1 Bearing, Radial 7 O-Ring Frame Adapter 3 Stud, Cartridge 1 Bearing, Thrust 73A Gasket, Casing Locknut, Cartridge 19 Bearing, Frame Mechanical Seal 5 O-Ring, Cartridge Locknut, Thrust Bearing 9A Seal, Labyrinth Stator, (Thrust) 1 Oil Filler Assembly 33 Bearing Cartridge 9B Seal, Labyrinth Rotor,(Thrust) 13 Bolt, Eye 35 Retainer Cover 9C Seal, Labyrinth O-Ring,(Thrust) 1 Plug, Magnetic 3 O-ring, Impeller Hub 9D Seal, Labyrinth Stator,(Radial) 33 Plug, Bearing Frame 1 Incorporated as part of cartridge in. Blackmer 19 Century Avenue SW, Grand Rapids, MI 953-153 USA T 1.1.111 F 1.1.375 www.blackmer.com

System One Vortex Pump Assembly and Parts List - Frame A Frame A NO. ITEM NO. ITEM NO. ITEM 1 Casing Key, Coupling 9E Seal, Labyrinth Rotor,(Radial) Impeller Flinger 9F Seal, Labyrinth O-Ring (Radial) Shaft Micrometer Nut 13 Oil Sight Glass 9 Suction Cover 9 Lockwasher, Thrust Bearing Foot, Bearing Frame 11 Back Cover 71 Frame Adapter 1 Foot, casing 1 Bearing, Radial 7 O-Ring Frame Adapter 3 Stud, Cartridge 1 Bearing, Thrust 73A Gasket, Casing Locknut, Cartridge 19 Bearing, Frame Mechanical Seal 5 O-Ring, Cartridge Locknut, Thrust Bearing 9A Seal, Labyrinth Stator, (Thrust) 1 Oil Filler Assembly 33 Bearing Cartridge 9B Seal, Labyrinth Rotor,(Thrust) 13 Bolt, Eye 35 Retainer Cover 9C Seal, Labyrinth O-Ring,(Thrust) 1 Plug, Magnetic 3 O-ring, Impeller Hub 9D Seal, Labyrinth Stator,(Radial) 33 Plug, Bearing Frame 1 Incorporated as part of cartridge in. Blackmer 19 Century Avenue SW, Grand Rapids, MI 953-153 USA T 1.1.111 F 1.1.375 www.blackmer.com 13

System One Vortex Frame LD17 and A - Auxiliary Pipe Connections List V IV VI II Discharge Suction VII X III I XI ITEM NPT NUMBER CONNECTION NUMBER SIZE OF TAPS * I.5-1 1 Casing Drain * II.5-1 1 Discharge Gage * III.5-1 1 Suction Gage * IV.5-1 1 Seal Chamber Flush (not available on LD17) V.75-1 1 Oil Fill * VI.5-1 Seal Chamber Jacket Inlet & Outlet ** * #* VII 1.-11.5 1 (not available on LD17) Oil Sight Glass # X.5-1 1 Oil Drain ## XI.5-1 Magnetic Plug or Cooling Coil* * Optional # Left side of pump facing suction end ## Right side facing suction end Blackmer 19 Century Avenue SW, Grand Rapids, MI 953-153 USA T 1.1.111 F 1.1.375 www.blackmer.com 1

System One Vortex Pump Composite Pump Curves - Frame LD17 and A and Metric Flange Vortex Pump (FRAME LD17 and A) Vortex Pump (Metric Flange) Vortex Pump Frame LD17 and A Pump Size CP FrA CP LD17 C FrA C LD17 Y X E D O F FrA SW dim. indicates width of optional spacer flange. All dimensions are in inches. F LD17 A A 1 E 1 E SW 1 x - 5..93 1. 1.93. 7.75.37.5 1. 1. 11.93 11.5 15.5 7.5 7.5 1. 3 x 3-1 7.1.9.5 19.7. 9.5 5.5 1. 19.5 15.5.9 13.75 19.5 7. 7.5 1. 3 x - 9.3.9 3. 1.19 5.5 11.5.5 1. 1.5 1.3 1.1 1.5. 9. 7.5 1.3 Vortex Pump Metric Flange Pump Size CP CP C C FrA LD17 FrA LD17 Y X E D O FF F FrA LD17 A A 1 E 1 E SW 1 5 x 5-51 5 55 1 1 195 111 3 33 5 37 191 15 5 x -5 9 573 55 117 1 1 5 95 39 37 35 9 11 15 3 1 x 1-3 7 7 53 1 9 15 5 5 7 359 559 5 15 35 SW dim. indicates width of optional spacer flange. All dimensions are in millimeters. Blackmer 19 Century Avenue SW, Grand Rapids, MI 953-153 USA T 1.1.111 F 1.1.375 www.blackmer.com 15

7 5. in 7. in 35 39 3 7 7 15 1 3. in 35 39 3 5 1. in. in 7. in 9 3 3 15 1 1 1 1 3 3 3 5 1 15 5 3 35 5 5 55 5 7 75 Curve No: S17V1 Blackmer System One Pump Size: x Pump Performance Characteristics Pump Size: 5x5 Effective Date: Jan/5 Catalog: 131 Speed: 175 rpm Vortex Impeller Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

3 1 3. in 7. in 3 39 1. in 3 39. 1.... in 7. in. in.. 1 1 1 1 1 5 1 15 5 3 35 5 5 Curve No: S171V1 Blackmer System One Pump Size: x Pump Performance Characteristics Pump Size: 5x5 Effective Date: Jan/5 Catalog: 131 Speed: 115 rpm Vortex Impeller Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

35 3 15 9 9.3 in 9. in 3 5 7 5 15 75 5. in 7. in. in 3 5 7 1 3 5 15 1. in 7. in. in 9. in 9.3 in 9 3 3 15 5 1 15 5 3 35 5 5 55 5 7 75 5 9 1 1 1 1 Curve No: S171V1 Blackmer System One Pump Size: 3x3 1 Pump Performance Characteristics Pump Size: x 5 Effective Date: Jan/5 Catalog: 131 Speed: 175 rpm Vortex Impeller Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

5 1 5 9.3 in 33 3 5 1 35 3 5. in. in 5 3 15 33 1 5. in. in 9.3 in 1 5 1 15 5 3 35 5 5 55 1 3 5 7 9 1 11 Curve No: S1711V1 Blackmer System One Pump Size: 3x3 1 Pump Performance Characteristics Pump Size: x 5 Effective Date: Jan/5 Catalog: 131 Speed: 115 rpm Vortex Impeller Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

1 5 1 1. in 11. in 1. in 3 3 7 5 5 5 5 3 1 9. in. in 3 7 1. in 9. in 1. in 11. in. in 1, 1, 1, 1, 1 1 1 1 3 3 3 3 3 Curve No: S1711V1 Blackmer System One Pump Size: x Pump Performance Characteristics Pump Size: 1x1 3 Effective Date: Jan/5 Catalog: 131 Speed: 175 rpm Vortex Impeller Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

7 5. in 11. in 35 1 5 5 5 5 15 1. in 1 3 9. in 5 1 15 1 5 7 1 9 9. in 1. in. in 11. in 3 1 3 5 7 9 1, 1 1 1 1 Curve No: S1711V1 Blackmer System One Pump Size: x Pump Performance Characteristics Pump Size: 1x1 3 Effective Date: Jan/5 Catalog: 131 Speed: 115 rpm Vortex Impeller Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

1 5 1 3 mm 1 3 3 17 mm 3 1 15 mm 3 1 3 15 mm 17 mm 3 mm 1 5 1 15 5 3 35 5 5 55 5 7 1 1 1 1 3 Curve No: S1713V1 Blackmer System One Pump Size: 5x5 Pump Performance Characteristics Pump Size: x Effective Date: Jan/5 Catalog: 131 Speed: 15 rpm Vortex Impeller Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

5.. 7. 3 mm. 15. 1.. 5... 3.. 17 mm 15 mm 3 3 3 3 5. 1.... 1.. 1.5 1..5.9 15 mm 17 mm 3 mm.. 1 3 5 1 15 5 3 35 5 5 1 1 1 1 Curve No: S1715V1 Blackmer System One Pump Size: 5x5 Pump Performance Characteristics Pump Size: x Effective Date: Jan/5 Catalog: 131 Speed: 9 rpm Vortex Impeller Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

7 1 1 mm 9 mm 33 3 5 5 15 3 mm 5 3 9 17 mm 15 mm 33 3 1 3 15 15 1 5 1 5 15 mm 17 mm 3 mm mm 9 mm 3 1 1 5 1 3 5 7 9 1 11 13 1 15 5 1 15 5 3 35 5 5 55 5 Curve No: S1719V1 Blackmer System One Pump Size: x 5 Pump Performance Characteristics Pump Size: 3x3 1 Effective Date: Jan/5 Catalog: 131 Speed: 15 rpm Vortex Impeller Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

1 3 5 9 7 mm 9 mm 3 mm 35 39 3 5 5 Head ft 15 Head m 5 17 mm 15 mm 35 39 3 1 3 5 1.. Power hp.... Power kw 3.. 17 mm 15 mm 3 mm 9 mm mm 1.. NPSHr ft... NPSHr m 3.. 1 3 5 7 9 1 11 Capacity m3/h 1 3 3 Capacity USgpm Curve No: S17111V1 Blackmer System One Pump Size: x 5 Pump Performance Characteristics Pump Size: 3x3 1 Effective Date: Jan/5 Catalog: 131 Speed: 9 rpm Vortex Impeller Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 fax: 1 1 375 www.blackmer.com

1 3 3 35 mm 79 mm 5 mm 37 3 7 5 5 5 5 1 9 mm 3 mm 3 7 5 35 mm 3 1 1 3 mm 5 mm 9 mm 79 mm 3 1 1 5 1 1 1 1 3 3 1 3 5 7 9 1 11 13 1 Curve No: S17115V1 Blackmer System One Pump Size: 1x1 3 Pump Performance Characteristics Pump Size: x Effective Date: Jan/5 Catalog: 131 Speed: 15 rpm Vortex Impeller Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 f ax: 1 1 375 www.blackmer.com

5 1 1 35 mm 79 mm 35 5 5 Head ft 3 Head m 1 1 1 Power hp 15 1 5 Power kw 9 mm 5 mm 79 mm 35 mm NPSHr ft 1 NPSHr m 1 3 5 7 9 1 11 13 15 17 19 Capacity m3/h 5 1 15 5 3 35 5 5 55 5 7 75 5 Capacity USgpm Curve No: S17117V1 Blackmer System One Pump Size: 1x1 3 Pump Performance Characteristics Pump Size: x Effective Date: Jan/5 Catalog: 131 Speed: 9 rpm Vortex Impeller Blackmer 19 Century Avenue SW Grand Rapids, MI 953 153 USA telephone: 1 1 111 fax: 1 1 375 www.blackmer.com

Pump Improvement Program System One Heavy-Duty Power End Upgrades - Advantages System One LD Power End Upgrade Program Designed for fit-up to Goulds 1 and Durco ANSI Pumps Lowest L3/D ratio in the industry 1 1 11 3 7 13 3 9 (Optional oil temperature monitor shown) 5 No modification needed, just bolt up and run. Greater window of operation away from Best Efficiency Point. 1 Goulds is a registered trademark. Durco is a registered trademark. 1 Patented micrometer adjustment nuts (Pat. #,39,9) fine tune impeller setting for maximum efficiency. Positive locking thrust bearing retainer cover for maximum bearing holding power and minimum axial movement. 3 Patented System One Labyrinth Seals (Pat. #, 57, 517) provide a nonwearing lifetime protection for radial and thrust bearings. Angular contact bearings are standard for high thrust capability. 5 Full support rear leg assures bearing frame remains upright during pump disassembly. Full adjustability aids in alignment. Two magnetic plugs are provided to maintain clean oil and are removable for insertion of cooling coil. 1 7 Solid shaft (no sleeve) 1 Large oil inlet for easy with minimal overhang provides superior resistance to deflection. filling of oil; the sealed cover minimizes dirt and moisture entry. System One large bore 11 Flinger filter constantly back cover accepts most standard mechanical seals. cleans oil during pump operation. (Frame A only) 9 Rabbit for C-Frame Oil sight glass for (NEMA) or D-Flange (IEC) motor adapter for constant monitoring of oil level and condition. instantaneous and precise 13 Optional throat bushing motor alignment. available for specific seals. Blackmer 19 Century Avenue SW, Grand Rapids, MI 953-153 USA T 1.1.111 F 1.1.375 www.blackmer.com 15

Pump Improvement Program System One Heavy-Duty Power End Upgrades - Advantages out of 5 pump downtimes are caused by seal and bearing failures. The System One LD Power End is designed specifically to eliminate the root causes of these failures. Goulds 1 319ST Durco MII G I Stronger shaft, greater resistance to damaging vibration Existing shafts with sleeves have a relatively small diameter and long overhang, resulting in a poor L3/D ratio. Unless conditions are perfect, the weak, slender shaft will bend under stress, causing vibration along its entire length. Shaft vibration hammers the mechanical seal and bearings, causing premature failures. Goulds 319MT Durco MII G II Converting to the LD Power End increases resistance to vibration by up to 5 times compared to original equipment. Seals and bearings are protected, even when the pump is running off the BEP, or subject to pipe strain or other external stresses. Original equipment: high L3/D equals high vibration. L D Goulds 319XLT L System One LD shaft has the lowest L3/D ratio in the industry. D LD Power End Upgrades are available today for the following popular ANSI pumps Goulds ST Goulds 319MT Goulds XLT Durco MII G I Durco MII G II 1 Goulds is a registered trademark. Durco is a registered trademark. Blackmer 19 Century Avenue SW, Grand Rapids, MI 953-153 USA T 1.1.111 F 1.1.375 www.blackmer.com 159

Pump Improvement Program System One Heavy-Duty Power End Upgrades - Advantages L 3 /D and bearing Comparison System One Goulds Durco System One Goulds Durco System One Goulds Frame S ST 1 GI Frame A Power MT 1 GII Frame M XLT 1 End Conversion L 3 D without sleeve (1.9) (.5) 7 (.) 3 Gld/1 Dur (.9/.7) (.3) 37 (1.7) 19 (.7) 5 (.9) L 3 D with sleeve N/A 13 (.5) 3 (1.3) N/A 11 (.) 5 (.5) N/A 1 (.3) bearings: radial 3 7,7 31 39 31 31 313 thrust 53 53 535, 731() 539 531 731() 5313 shaft diameter at seal 1.5 (3) 1.375 (35) 1.5 (9) 1.75 () 1.75 (5) 1.75 ().5 (7).5 () System One LD Power End Conversions are also available as a universal version that allows adaptation to many existing process pumps. Universal frame adapters are available to retrofit various configurations. Stronger shaft resists damaging vibration The System One LD power ends increase resistance to deflection and vibration. With a solid shaft (no sleeve) and shorter overhang, System One pumps offer the lowest LD ratio in the industry and are especially suited for maximizing seal/bearing life and operation off the BEP. Quality motor alignments The System One LD power end features C-frame motor adapter capability that provides precise alignment for quick and repeatable motor mounting and eliminates vibration. And, skill level, temperature concerns, and time constraints are all eliminated with the simplified motor mounting. Improved seal environment The System One large volume seal chamber has an increased volume for enhanced cooling, cleaning, and seal lubrication. The first process pump manufacturer to offer large bore seal chambers as standard equipment. Superior bearing protection System One Labyrinth seals provide lifetime, non-wearing protection against contaminants that can decrease bearing life. The seals replace short-lived and shaft-damaging rubber lip seals. In addition, pressure tight face seals are available for moisture-laden environments or immersion. Conventional long, thin, light duty shaft. L3/D = to 3 (.5 to1.3) for small frame pumps. L3/D = 3 to 11 (1.7 to.) for medium frame pumps. System One Upgrade shaft. L3/D = (1.9) for small frame pumps. L3/D = 1 to 3 (.7 to.9) for medium frame pumps. These values show the shaft to be many times stiffer than the original equipment. Top: Lip seals damage shafts and lose effectiveness rapidly. Bottom: Long term effective Labyrinth seal protection is standard on the LD Power End. C-Frame Motor Adapter eliminates manual alignment problems. Blackmer 19 Century Avenue SW, Grand Rapids, MI 953-153 USA T 1.1.111 F 1.1.375 www.blackmer.com 1

System One Heavy-Duty Process Pump Accessories System One Pumps Baseplates Specialized baseplates available for all Blackmer System One Pumps PIPTypeBase boxed ends, liftinglugsand sloped topwithdrain Types Offered: Standard System One steel channel P.I.P. specification RESP Per Customer specific requirements Options available: Drip rim with drain Boxed ends Sloped base Leveling screws Grout holes - Vent holes Motor adjusting jacks Lifting lugs Materials: Carbon Steel 3 or 31 Stainless Steel Galvanized Steel Standard System One Pump mounted on a Vertical Stand for V Belt Drive SystemOne Pump on standardsteel channelbase with barrier fluid tank support stand 1 Blackmer 19 Century Avenue SW, Grand Rapids, MI 953-153 USA T 1.1.111 F 1.1.375 www.blackmer.com 11

System One Heavy-Duty Process Pump Accessories System One 1 SpiralTrac Seal Chamber Bushings Innovative Technology for Improvement of the Seal Environment Seal Cavity Without SpiralTrac SpiralTrac is a specially designed bushing that is inserted in the bottom of a seal chamber (or stu ng box if a packed pump) and is made from 31SS, 1SS, carbon graphite or PTFE material. The SpiralTrac is designed to improve the operating environment for the mechanical seal through the use of a variable geometry spiral grooving system. During operation, SpiralTrac converts the rotating Ä ow to an axial Ä ow in the seal cavity and drives it away from the seal toward the impeller. The contaminants are swept by centrifugal force toward the SpiralTrac and into the groove where the main spiral forces the contaminants out through the exit groove at the shaft. SpiralTrac contains a unique air vent in the top of the bushing to purge air on initial pump Ä ooding. If the product is aerated or the pump runs dry, an external Ä ush, a single seal with a quench, or a double seal is required. SpiralTrac enables venting of the seal chamber, drives circulation and exchange of uid, and removes abrasives or contaminants. No Environmental Control Seal Cavity With SpiralTrac 1 SpiralTrac is a registered trademark of the manufacturer, EnviroSeal Engineering Products Ltd.,Waverly, Nova Scotia. Total Environmental Control Blackmer 19 Century Avenue SW, Grand Rapids, MI 953-153 USA T 1.1.111 F 1.1.375 www.blackmer.com

System One Heavy-Duty Process Pump Accessories System One SpiralTrac 1 Benefits Increases Seal MTBF By preventing accumulation of solids in the cavity, circulating fluid around the seal, exchanging internal cleaned flush and venting the cavity when the pump is stationary. Decreases or eliminates flush Spiraltrac s patented design permits users to greatly reduce or eliminate flush in many standard process applications. Complete elimination of flush is dependent on the type of application and mechanical seal specified. Please check with the factory to determine the application s suitability for total flush elimination. Eliminates seal and cavity erosion In most mill and mining services, the flush itself contains solids from pipe scale, silt or settling ponds. This dirt is injected with the flush and due to flow patterns within the seal cavity, causes premature wear of the seal and cavity itself. SpiralTrac develops a flow pattern whereby solids are drawn towards the front of the box, and subsequentially channeled through the exit groove of the device and expelled at the impeller. This same phenomenon also significantly reduces erosion of the shaft. Reduces seal cavity sensitivity to flush pressure loss In a standard seal cavity, if flush pressure is lost for a period of time, solids will enter the cavity. Once inside the cavity, centrifugal force will throw the solids to the bore, and even when the flush returns, it cannot push the solids out because they are trapped along the bore. With SpiralTrac installed, solids are continuously removed even if flush pressure is lost. Since solids are kept away from the seal, premature failure as a result should not occur. U.S. Patents # 5,553, #5,17,1 Euro. Pat. App. 9 Enables seals to operate in applications not possible before Many customers have had poor results using mechanical seals because of high solids / fibre content in the process fluid. These solids get in around the seal area, de-water and consequently cause the seal to overheat and fail. SpiralTrac s inherent ability to remove solids / fibres from around the seal allows many of the applications to become successful. Protects single or double seals Solids will enter the seal cavity whether or not a single or double seal is installed. SpiralTrac will develop a flow to remove these solids regardless of the seal design. The SpiralTrac offers a dramatic improvement of mechanical seal life over a broad range of applications and operating conditions. These devices can be designed to operate with reduced or no flush in both fibrous and non-fibrous applications. SpiralTrac significantly improves mechanical seal MTBF over a conventional seal operating alone. 1 SpiralTrac is a registered trademark of the manufacturer, EnviroSeal Engineering Products Ltd., Waverly, Nova Scotia. Blackmer 19 Century Avenue SW, Grand Rapids, MI 953-153 USA T 1.1.111 F 1.1.375 www.blackmer.com 13

System One Heavy-Duty Process Pump Accessories System One SpiralTrac 1 Environmental Controller & Throat Bushing Selection Chart " 1" & 13" Durco MK II GR I Durco MK II GR II Durco MK II GR II LD1 Durco SLS SpiralTrac Frame S Goulds 3 ST BCC Goulds 3 MT BCC Goulds 3 MT BCC LD 3 Goulds 3 SLS Backcover Counterbor e SpiralTrac 3 CG/PTFE SpiralTrac 31SS SpiralTrac 1SS SealMate 3 31SS SealMate Hast C 3. x.75 3. x.75.5 x 1 5.5 x 1 3. x.75 1.5 x 3. 1.375 x 3. 1.75 x.5 1.75 x 5.5 1.75 x 3. 1.5 x 3. 1.375 x 3. 1.75 x.5 1.75 x 5.5 1.75 x 3. 1.5 x 3. 1.375 x 3. 1.75 x.5 1.75 x 5.5 1.75 x 3. 1.5 x 3.7 1.375 x 3.7 N/A N/A 1.75 x 3.7 1.5 x 3.7 1.375 x 3.7 N/A N/A 1.75 x 3.7 SpiralTrac Frame A ANSI Frame A LD17 Mid Frame Short Seal Chamber Backcover Frame A 3.9 x 1 3. x.75.5 x.7 Counterbor e borebc+sc thru 3.53 SpiralTrac CG/PTFE 1.75 x 3.9 1.75 x 3..5 x.5 SpiralTrac for Seal CG/PTFE.57 x 3. SpiralTrac 31SS SpiralTrac 1SS SealMate 31SS SealMate Hast C Frame A Short Seal Chamber. wide x 3.53/3.59 bore 1.75 x 3.9 1.75 x 3..5 x.5 1.75 x 3.53 1.75 x 3.9 1.75 x 3..5 x.5 1.75 x 3.9 1.75 x 3.7 N/A 1.75 x 3.9 1.75 x 3.7 N/A Throat Bushings Frame S Durco M II GR I Durco M II GR II LD 1 Durco SLS Goulds ST BCC Goulds MT BCC LD 3 Goulds SLS Carbon bushings Counterbor e.39 x.35 consultfactory 3. x. consultfactory specialmachining standard Bushing 1.5 x.39 1.7/1.75x 3. 1K Bushings 5 Counterbor e 3. x.75 3. x.75 3. x. consultfactory specialmachining specialmachining standard 1KRB (PTFE) 5 1.5 x 3. x.5 1KRBP (poly) Throat Bushings Frame A ANSI Frame LD17 Frame M Carbon bushings Counterbor e 3.5 x.7 3.5 x.7 3.7 x.75 standard (incl.) specialmachining specialmachining Bushing 1.7 x 3.5 1.7 x 3.5.3 x 3. x.7 1K Bushings 5 Counterbor e 3.5 x.7 3.5 x.7 standard special machining 1KRB (PTFE) 5 1.9 x 3.35 x.5 1.9 x 3.35 x.5 1KRBP (poly) 1.9 x 3.35 x.5 1.9 x 3.35 x.5 1 SpiralTrac is a registered trademark of the manufacturer, EnviroSeal Engineering Products Ltd., Waverly, Nova Scotia. Durco is a registered trademark 3 Goulds is a registered trademark 5 Product of A. W. Chesterton Company Blackmer 19 Century Avenue SW, Grand Rapids, MI 953-153 USA T 1.1.111 F 1.1.375 www.blackmer.com 1

System One Heavy-Duty Process Pump Accessories System One Pump Accessories Bearing Oil Temperature Monitors Early warning helps prevent bearingfailures and improve equipment reliability Increase in oil temperature indicates bearing or lube failure Constant monitoring of lubrication environment Adapts to any type of oil-lubricated machinery by screwing into a 1/" NPT connection Corrosion-resistant, hermetically sealed stainless steel housing Polycarbonate lens and easy-to-read color coded dial Calibrated in both Fahrenheit and Celsius scales Rustproof Dustproof Leakproof Hermetically sealed Graduated in both Fahrenheit and Centigrade degrees; accuracy ± 1% total scale range. Cooling coil with swagelock tube fittings. Available for Frame S, Frame A, and Frame M pumps. (Frame A shown) Required for temperature greater than: F (5 C) @ 1 RPM (15 RPM) 3 F (15 C) @ 3 RPM (9 RPM). More efficient than cast jackets. Oil is cooled directly, thus cooling the bearings simultaniously. Installed in place of magnetic plugs. Monitor clearly indicates potential failure of bearings and/or lubrication by an increase in oil temperature. The System One Bearing Oil Temperature Monitor is a simple and effective preventive maintenance tool that improves equipment reliability by the constant monitoring of the lubrication environment. All types of pumps and other oil lubricated machinery will benefit from this product. The device simply screws into any 1/ NPT connection and instantly registers the temperature of the oil. To order Frame S or any 1/" NPT application No. 53. Frame A & M (with 3/" x 1/" reducing bushing) No. 531. Blackmer 19 Century Avenue SW, Grand Rapids, MI 953-153 USA T 1.1.111 F 1.1.375 www.blackmer.com 15

System One Heavy-Duty Process Pump Accessories System One Pumps Control Heat Casing Jackets 1 Full range of heating jackets for Frame S and Frame A Pumps Jackets are required for applications where liquids must be maintained at a certain temperature or will solidify if cooled. Bolt on system provides thermal performance necessary to meet narrow-envelope processing. Several recent applications for heating jackets include: Maleic anhydride Molten sulfur Food products Polyester resins Chlorinated resins Waxes Calcium chloride Coal tars Construction: Jackets are made by casting aluminum alloy around steel tubing for connection to the heating liquid. Couplings are 3 lb. 3/" NPT fittings, on each side. Custom designed to fit snugly against the casing walls for each casing size. Jackets are split into two sections to allow bolting around the casing. Special heat transfer cement is applied between the casing and the jacket to allow for maximum thermal conduction. The System One Pump is particularly suited for high temperature operation due to the following design features: Centerline casing support Bearing frame fins for cooling C Frame motor adapter for alignment Finned cooling coil in the oil sump Jacketed large bore seal chamber The System One Pump combined with the casing jacket provides the finest and most reliable high temperature pump in the industry today. Side view of jacket showing clamp to discharge flange. Note piping connections to jacketed seal chamber. Front view showing 3/" NPT couplings for connection of steam piping. Jacket is split along vertical axis. 1 Product of Controls Southeast of Charlotte, NC. Blackmer 19 Century Avenue SW, Grand Rapids, MI 953-153 USA T 1.1.111 F 1.1.375 www.blackmer.com 1