212 Photo: Akito Goto/goto photo office
213 ADONIS True Color IP67 Light intensive, IP67 protected and IK10 certified, linear LED luminaire with small form factor and opal encapsulation with a homogeneous light emission and diffuse light distribution. ADONIS IP67
214 Photo: Jannes Linders ADONIS True Color IP67 Convinces with light intensity and unmatched light control Minimalist aesthetics combined with outstanding functionality ADONIS True Color impresses as a thoughtful lighting system. The high-performance opal encapsulated linear luminaire in IP67 with small form factor provides a lumen current of up to 2,520 lm/m (770 m/ft). ADONIS True Color is characterized by its formal elegance and absolutely dotfree, homogeneous light emission surface. It is IP67 protected against water, salt water, solvents and UV radiation by an opal polyurethane encapsulation. The utilized polyurethane features a 5 times higher chemical resistance and a 10 times lower water transmission compared to typical silicones for LED applications in the relevant temperature range (-50 C to 80 C / 58 F to 176 F). The True Color technology enables an optimal rendition of the LED spectrum out of the encapsulation (no color shift). Furthermore, it is IK10 certified and therefore particularly robust against environmental impacts. It is available in five standard lengths and is supplied ready to plug in with a IP67 mini connector. It fascinates with a simple installation with internal mounting clips for recessed or surfacemount without visible light joints and connections, fulfilling the high demands in the professional area. With the easy installation and high resistance, it is ideally suited for a variety of applications, both indoors and outside such as facades, tunnels, roads, parking lots, halls, swimming pools, libraries and kitchens. ADONIS IP67
215 Photo: Andrew Worssam Maximum light output of 2370 lm/m (720 lm/ft) with minimum dimensions of (W x H) 20.5 mm x 25.5 mm (0.81" x 1") IP67 protected against water, salt water and UV radiation by an opal Polyurethane encapsulation and IK10 checked (impact resistance) Dot free and absolutely homogeneous light emission surface IK10 Dot free rigid linear LED line Cross section Length Power Luminous flux Efficacy Beam angle/optics Color temperature/color CRI 20.5 mm x 25.5 mm 0.81" x 1" 639 mm, 951.5 mm, 1,264 mm, 1,514 mm, 1,826.5 mm 2.1', 3.12', 4.15', 4.97', 5.99' 6 W/m 36 W/m 1.8 W/ft 11 W/ft up to 2,520 lm/m 770 lm/ft up to 71 lm/w 120 2,000 K 5,000 K, Tunable White 96
216 ADONIS True Color HD15 Pärnu Bay Golf Links, Estonia Photo: BM Light OÜ
217 ADONIS True Color IP67 Voltage (V) CRI Lumen/W (lm/w) Watt/m / Watt/ft (W/m / W/ft) Lumen/m A / Lumen/ft A (lm/m / lm/ft) min. length (mm / in) max. length (mm / ft) Page ADONIS TC White IP67 HD6 24 96 67 6 / 1.8 400 / 120 639 / 25.16 1,827 / 6 218 HD10 24 96 66 10 / 3 660 / 200 639 / 25.16 1,827 / 6 HD15 24 85 71 15 / 4.6 1,060 / 320 639 / 25.16 1,827 / 6 HD25 24 85 69 25 / 7.6 1,730 / 530 639 / 25.16 1,827 / 6 HD36 24 85 70 36 / 11 2,520 / 770 639 / 25.2 1,827 / 6 ADONIS TC IQ White ATON IP67 HD12 24 85 40 12 / 3.7 490 / 150 639 / 25.16 1,827 / 6 220 HD24 24 85 42 24 / 7.3 1,020 / 310 639 / 25.16 1,827 / 6 ADONIS TC RGB IP67 HD20 24 24 22 / 6.7 490 / 150 639 / 25.16 1,827 / 6 A White @W850. At warmer light colors the luminous flux is reduced. IQ White / RGB When all channels/colors are at full power. Using single channels/colors reduces the luminous flux. ADONIS IP67
218 ADONIS True Color White IP67 24 V, IP67 protected and IK10 certified, linear surface-mounted LED luminaire with small form factor. Full polyurethane encapsulation with an opal polyurethane top layer offering a premium water proof sealing (values), UV resistance (no coloration or increase of absorption) chemical stability against urban gazes and protection against abrasion. The True Color technology enables a optimum rendition of the LED spectrum (minimal color shift). Extruded H-shaped aluminum profile painted in white with cable groove on its backside. Delivered with male/female IP67 connectors and translucent end caps for a perfect fixture to fixture light overlap. Ideal solution for facade accent or general lighting in outdoor or humid environments. Light source assembled using state of the art automated Reel to Reel (R2R) production process supporting LED Linear Tj Away thin flexible circuit board technology. In combination with ceramic LED packages a thermal resistivity of 18.5 K/W is achieved for an optimal heat dissipation (junction to profile) which guarantees an outstanding lifetime of > 60,000 hrs L80/B10. Embeds high quality japanese LEDs with 3 step MacAdams (SDCM3) binning centered on target CCT (One Bin Only) with an extended photometric code of Wxxx/339 ensuring an exceptional color consistency over the rated lifetime. Premium color rendition with a CRI of 95 and TM-30-15 up to R f = 91 / R g = 100 ensuring a remarkable light quality. Consistent light intensity all along the luminaire length is obtained thanks to active current regulation operated by dedicated integrated circuits (ICs) on each step. Protected against electrostatic discharge ± 2,000 V and polarity miswiring. Fully PWM dimmable for frequency > 0 Hz up to 2 khz (flicker free for frequency higher then 1.2 khz according to IEEE P1789 standard). Engineered and produced in Germany. Dimensions & available lengths 20.5 mm / 0.81" 25 mm / 0.98" 25.5 mm / 1" 8.5 mm / 0.33" 7 mm / 0.28" 225 mm / 8.86" 200 mm / 7.87" 7 mm / 0.28" 5 Standard lengths (L): 639 mm / 952 mm / 1,264 mm / 1,514 mm / 1,827 mm 2.1' / 3.12' / 4.15' / 4.97' / 6' Tc 7 mm / 0.28" Opal encapsulated LED light line Finish: White powder coated Tc-point (Case temp.) on the rear side of the module Electrical & output data Voltage 24 Volt (23 V min, 25 V max) Temperature B Tc min = -25 C / -13 F, Tc max = specific, see Table below Storage temperature Ts min = -30 C / -22 F, Ts max = 85 C / 185 F Ambient temperature Ta min = -25 C / -13 F, Ta max = 40 C / 104 F (HD36 35 C / 95 F) CRI / R9 up to 96 / up to 80 L80/B10 > 60.000 h Lifetime UV protected Resistant to solvents ADONIS True Color HD6 HD10 HD15 HD25 HD36 Power (W/m / W/ft) A 6 / 1.8 10 / 3.1 15 / 4.6 25 / 7.6 36 / 11 Efficacy (lm/w) A @ W850 67 66 71 69 70 max. serial run length (m / ft) 5 / 16.4 5 / 16.4 4 / 13.1 3 / 9.8 2 /6.6 Temperature Tc-point (Tc max) B 70 C / 158 F 70 C / 158 F 70 C / 158 F 75 C / 167 F 95 C / 203 F HD6 HD10 HD15 HD25 HD36 Color temperature low output high output LED tape used C lumen/meter (lm/m) A lumen/feet (lm/ft) A W820 2,000 K 230 / 70 380 / 120 610 / 190 1,000 / 300 1,460 / 450 W822 2,200 K 260 / 80 440 / 130 710 / 220 1,140 / 350 1,670 / 510 W825 2,500 K 300 / 90 500 / 150 810 / 250 1,310 / 400 1,910 / 580 W827 W927 2,700 K 270 / 80 450 / 140 850 / 260 1,390 / 420 2,030 / 620 W830 W930 3,000 K 270 / 80 460 / 140 910 / 280 1,470 / 450 2,150 / 660 W835 W935 3,500 K 280 / 90 470 / 140 950 / 290 1,550 / 470 2,260 / 690 W840 W940 4,000 K 290 / 90 480 / 150 970 / 300 1,580 / 480 2,310 / 700 W850 5,000 K 400 / 120 660 / 200 1,060 / 320 1,730 / 530 2,520 / 770 Wxxx/ 339 LM 79 LM 80 Photometric code LM 79 compliant LM 80 compliant No color shift IK10 Saltwater resistant Temporary immersion protection Impact resistant (suitable for walk over) A The given data are typical values. Due to tolerances of the production process and the electrical components, values for light output and electrical power can vary up to 10%. B The Tc-point should be measured in thermal equilibrium according to IEC EN 60598-1. C As any luminaire with an opal cover, the CCT might be subject to a drift toward the Warm White. The drift has been quantized an remain within the +/- 10% tolerance mentioned above. Edition: August 29, 2018 For actual data, further options and detailed information, please visit our website www.led-linear.com
25.5 / 1" 219 Order code Your order code ADONIS TC HYDRA HD W8 IP67 0 100 90 Order code example ADONIS TC HYDRA HD10 W8 27 1514 IP67 200 300 60 LED tape HYDRA HD6... HD6 HYDRA HD10... HD10 HYDRA HD15... HD15 HYDRA HD25... HD25 HYDRA HD36... HD36 Color rendering > 80... 8 Color temperature delivered finished fixture 2,000 K... 20 2,200 K... 22 2,500 K...25 2,700 K... 27 3,000 K... 30 3,500 K... 35 4,000 K... 40 5,000 K... 50 Length 639 mm (2.1') (2 clips recommended)... 0639 952 mm (3.12') (2 clips recommended)... 0952 1,264 mm (4.15') (3 clips recommended)... 1264 1,514 mm (4.97') (3 clips recommended)... 1514 1,827 mm (6') (4 clips recommended)... 1827 Ingress protection IP67... IP67 0 30 DIN 5040:A40 cd/1.000 lumen C0/C180 C90/C270 Please choose your accessories Mounting Extensions / Jumpers (optional) VarioClip 010 (required every 40 cm / 1.31') 13000202 Contour 010 Adjustable Wall Mount Set 13000165 Mounting Lock Set D (for vertical mounting) 13000287 VarioCon Female Mini 2 x 0.34 mm 2, 2 m / 6.56' IP67 15000142 VarioCon Extension Mini 2 x 0.34 mm 2, 0.1 m / 0.33' IP67 15000143 VarioCon Female Mini Protection Cap Mono IP67F F 15000218 Adjustable Mounting Clip C007/C010 L140 VarioContour 010 Inground Channel E (for indoor installation only) 13000265-SIL 10000542- RAL9003-FS Recommended power supply Power Supply Unit IP67 16000153 20.5 / 0.8" Recommended control unit Control System White/IQ-White 16000268-DT6 D The mounting lock is used to fix the sliding mounting clips, thus allowing a vertical wall mounting. Easy and clean installation due to internal mounting clips. ADONIS / KALYPSO H-channel also acts as cable raceway. Therefore you do not see any clips or cables from the outside. For actual data, further options and detailed information, please visit our website www.led-linear.com E Article requires end caps, please contact us for more information F Required for IP67 connector sealing at end of runs. Edition: August 29, 2018
220 ADONIS True Color IQ White/RGB IP67 24 V, IP67 protected and IK10 certified, linear surface-mounted LED luminaire with small form factor. Full polyurethane encapsulation with an opal polyurethane top layer offering a premium water proof sealing (values), UV resistance (no coloration or increase of absorption) chemical stability against urban gazes and protection against abrasion. The True Color technology enables a optimum rendition of the LED spectrum (minimal color shift). Extruded H-shaped aluminum profile painted in white with cable groove on its backside. Delivered with male/female IP67 connectors and translucent end caps for a perfect fixture to fixture light overlap. Ideal solution for facade accent or general lighting in outdoor or humid environments. Light source assembled using state of the art automated Reel to Reel (R2R) production process supporting LED Linear Tj Away thin flexible circuit board technology. In combination with ceramic LED packages an optimal heat dissipation (junction to installation surface) is achieved which guarantees an outstanding lifetime of > 60,000 hrs L80/B10 for tunable white and 30,000 hrs for RGB. Embeds for tunable white centered high quality LEDs with 3 step MacAdams (SDCM3) binning on target CCT (One Bin Only) with an extended photometric code of Wxxx/339 ensuring an exceptional color consistency over the rated lifetime. Premium color rendition with a CRI of 85 and TM-30-15 up to R f = 86 / R g = 98 ensuring a remarkable light quality. Consistent light intensity all along the luminaire length is obtained thanks to active current regulation operated by dedicated integrated circuits (ICs) on each step. Protected against electrostatic discharge ± 2,000 V and polarity miswiring. Fully PWM dimmable for frequency > 0 Hz up to 2 khz (flicker free for frequency higher then 1.2 khz according to IEEE P1789 standard). Engineered and produced in Germany. Dimensions & available lengths 20.5 mm / 0.81" 25 mm / 0.98" 25.5 mm / 1" 8.5 mm / 0.33" 7 mm / 0.28" 225 mm / 8.86" 200 mm / 7.87" 5 Standard lengths (L): 639 mm / 952 mm / 1,264 mm / 1,514 mm / 1,827 mm 2.1' / 3.12' / 4.15' / 4.97' / 6' 7 mm / 0.28" 7 mm / 0.28" Tc a) IQ White 1 + white 2 + red 3 W840 4 W822 b) RGB 1 + white 2 red 3 blue 4 green Opal encapsulated LED light line Finish: White powder coated Tc-point (Case temp.) on the rear side of the module Electrical & output data Voltage 24 Volt (23 V min, 25 V max) Temperature B Tc min = -25 C / -13 F, Tc max = specific, see Table below Storage temperature Ts min = -30 C / -22 F, Ts max = 85 C / 185 F Ambient temperature Ta min = -25 C / -13 F, Ta max = 40 C / 104 F L80/B10 > 60.000 h IQ White IQ White Lifetime UV protected Resistant to solvents ADONIS True Color IQ White ATON HD12 (low output) IQ White ATON HD24 (high output) RGB HD20 Power (W/m / W/ft) A 12 / 3.7 24 / 7.3 22 / 6.7 Efficacy (lm/w) A 40 42 24 CRI / R9 85 / 20 85 / 20 max. serial run length (m / ft) 5 / 16.4 4 / 13.1 4 / 13.1 Temperature Tc-point (Tc max) B 70 C / 158 F 70 C / 158 F 60 C / 140 F L80 30.000 h Wxxx/ 339 LM 79 RGB Lifetime Photometric code LM 79 compliant IK10 Saltwater resistant Temporary immersion protection Impact resistant (suitable for walk over) lumen/meter (lm/m) A LED tape Color temperature C Color (λd) lumen/feet (lm/ft) A IQ White ATON HD12 490 / 150 W822 (2,200 K) W840 (4,000 K) IQ White ATON HD24 1,020 / 310 RGB HD20 622 (R)/532 (G)/466 (B) 490 / 150 LM 80 LM 80 compliant No color shift A The given data are typical values. Due to tolerances of the production process and the electrical components, values for light output and electrical power can vary up to 10%. B The Tc-point should be measured in thermal equilibrium according to IEC EN 60598-1. C As any luminaire with an opal cover, the CCT might be subject to a drift toward the Warm White. The drift has been quantized an remain within the +/- 10% tolerance mentioned above. Edition: August 29, 2018 For actual data, further options and detailed information, please visit our website www.led-linear.com
25.5 / 1" 221 Order code Your order code ADONIS TC IP67 0 100 90 Order code example ADONIS TC IQ W ATON HD24 1514 IP67 200 300 60 LED tape IQ White ATON HD12... IQ White ATON HD12 IQ White ATON HD24... IQ White ATON HD24 RGB HD20... RGB HD20 Length 639 mm (2.1') (2 clips recommended)... 0639 952 mm (3.12') (2 clips recommended)... 0952 1,264 mm (4.15') (3 clips recommended)... 1264 1,514 mm (4.97') (3 clips recommended)... 1514 1,827 mm (6') (4 clips recommended)... 1827 Ingress protection IP67... IP67 0 30 DIN 5040:A40 cd/1.000 lumen C0/C180 C90/C270 Please choose your accessories Mounting Extensions / Jumpers (optional) VarioClip 010 (required every 40 cm / 1.31') 13000202 Contour 010 Adjustable Wall Mount Set 13000165 Mounting Lock Set D (for vertical mounting) 13000287 VarioCon Female Mini 4 x 0.25 mm 2, 2 m / 6.56' IP67 15000202 VarioCon Extension Mini 4 x 0.25 mm 2, 0.1 m / 0.33' IP67 15000203 VarioCon Female Mini Protection Cap RGB F 15000219 Adjustable Mounting Clip C007/C010 L140 VarioContour 010 Inground Channel E (for indoor installation only) 13000265-SIL 10000542- RAL9003-FS Recommended power supply Power Supply Unit IP67 16000153 20.5 / 0.8" Recommended control unit Control System White/IQ-White 16000268-DT6 Recommended control unit Control System RGB 16000058 D The mounting lock is used to fix the sliding mounting clips, thus allowing a vertical wall mounting. Easy and clean installation due to internal mounting clips. ADONIS / KALYPSO H-channel also acts as cable raceway. Therefore you do not see any clips or cables from the outside. For actual data, further options and detailed information, please visit our website www.led-linear.com E Article requires end caps, please contact us for more information F Required for IP67 connector sealing at end of runs. Edition: August 29, 2018