VESPER-LED IP 65 pplication: outdoor areas, main and side roads of the cities and villages, parking and industrial areas. allast: EP electronic 220-240 V/50-60 Hz ody: luminium die cast housing Optical part: Special glass lens Fastening: Fastening on brackter column with diameter 50 mm (VESPER 50) or 60 mm (VESPER 85 and VESPER 100). Lifetime: L8010/50 000 h/35 electronic ballast 051580 VESPER-50-3K 051581 VESPER-50-4K 051582 VESPER-50-5K 051583 VESPER-85-3K 051584 VESPER-85-4K 051585 VESPER-85-5K 051586 VESPER-100-3K 051587 VESPER-100-4K 051588 VESPER-100-5K Tc/λ (Im)* (W)** 3 000 4 000 5 000 3 000 4 000 5 000 3 000 4 000 5 000 5516 5697 5783 11082 11446 11618 12002 12396 12582 43 43 43 90 90 90 88 88 88 500 x 215 x 85 500 x 215 x 85 500 x 215 x 85 600 x 260 x 90 600 x 260 x 90 600 x 260 x 90 700 x 280 x 120 700 x 280 x 120 700 x 280 x 120 (lm)* - luminous flux, (W)** - input power VESPER-85-5K, IP 65 400 600 800 1000 3 15 15 www.vyrtych.com 3 181
FLT IP 66 pplication: outdoor areas, main and side roads of towns and villages, parking industrial areas, pedestrián zones and parks. ody: Painted aluminium casting over: Hardened safety glass Reflector: Very pure (99,8%) aluminium pressed piece Fastening: Fastening on bracket and park column with diameters: Ø48-60 mm 50-150 W Ø48-76 mm 250-400 W onnection: Screwless three-pole terminal block, max. diameter of wires 2,5 mm² SYM option with asymmetrical reflector 053500 FLT-50S, 1x50W 540 x 286 x 248 HST/E27 053501 FLT-70S, 1x70W 540 x 286 x 248 053502 FLT-100S, 1x100W HST/E40 540 x 286 x 248 053503 FLT-150S, 1x150W HST/E40 540 x 286 x 248 053504 FLT-150H, 1x150W HIT/E27 540 x 286 x 248 053505 FLT-250S, 1x250W HST/E40 630 x 286 x 248 053506 FLT-250H, 1x250W, 3,0 HIT/E40 630 x 286 x 248 053507 FLT-400S, 1x400W HST/E40 630 x 286 x 248 053508 FLT-250H, 1x250W, 2,15 630 x 286 x 248 053509 FLT-400H, 1x400W, 4,2 HIT/E40 630 x 286 x 248 053510 FLT-400H, 1x400W, 3,5 630 x 286 x 248 S high pressure sodium discharge lamp, H metal halide lamp Only for HIT, HST lamp (tubular lamps) FLT-70S, 1x70W FLT-400S, 1x400W Instruction for selection appropriate lamp to individual type of light fi tting available on www.vyrtych.com 400 320 600 3 15 800 1000 3 15 480 640 182
HORNET IP 43 / IP 65 pplication: outdoor areas, main and side roads of the cities and villages, parking and industrial areas. ody: ombination of plastic materials P (polycarbonate) and PP (polypropylene) over: Plastic material P (polycarbonate), optical, transparent colour Reflector: Polished aluminium reflector Fastening: Fastening on bracket and park columns with diameter 60 mm onnection: Screwless three-pole terminal block, max. diameter of wires 2,5 mm² 054009 HORNET-70S, 1x70W, without fuse HSE, HST/E27 610 x 310 x 370 054010 HORNET-70H, 1x70W, without fuse HIE, HIT/E27 610 x 310 x 370 054029 HORNET-70S, 1x70W, build in fuse HSE, HST/E27 610 x 310 x 370 054030 HORNET-70H, 1x70W, build in fuse HIE, HIT/E27 610 x 310 x 370 054012 HORNET-70S I, 1x70W, without ignitor HSE, HST/E27 610 x 310 x 370 054006 HORNET-100S, 1x100W, without fuse HSE, HST/E40 610 x 310 x 370 054007 HORNET-100H, 1x100W, without fuse HIE, HIT/E27 610 x 310 x 370 054026 HORNET-100S, 1x100W, build in fuse HSE, HST/E40 610 x 310 x 370 054027 HORNET-100H, 1x100W,build in fuse HIE, HIT/E27 610 x 310 x 370 054003 HORNET-150S, 1x150W, without fuse HSE, HST/E40 610 x 310 x 370 054004 HORNET-150H, 1x150W, without fuse HIE, HIT/E27 610 x 310 x 370 054023 HORNET-150S, 1x150W, build in fuse HSE, HST/E40 610 x 310 x 370 054024 HORNET-150H, 1x150W, build in fuse HIE, HIT/E27 610 x 310 x 370 054001 HORNET-250H, 1x250W, 3,0, without fuse HIE, HIT/E40 610 x 310 x 370 054000 HORNET-250S, 1x250W, without fuse HSE, HST/E40 610 x 310 x 370 054015 HORNET-250H, 1x250W, 2,15, without fuse HIE, HIT/E40 610 x 310 x 370 054021 HORNET-250H, 1x250W, 3,0, build in fuse HIE, HIT/E40 610 x 310 x 370 054016 HORNET-250H, 1x250W, 2,15, build in fuse HIE, HIT/E40 610 x 310 x 370 054020 HORNET-250S, 1x250W, build in fuse HSE, HST/E40 610 x 310 x 370 special equipment 001803 Reduction Ø 60 / 50 mm S high pressure sodium discharge lamp, H metal halide lamp On customer s request HORNET-70H and HORNET-150H can be equipped with electronic ballast. HORNET-70S-I type not equipped with igniter, necessary to use lamp with integrated igniter. dvantages of light fixture range of luminares in wattages from 70W to 250W same design as HORNET-P light fixture for lighting pedestrian crossings easy mounting on park or bracket column removable metal sheet with electrical components advantage for fast and easy maintenance colour stability (UV stable material) plastic design of luminaires guarantees corrosion resistance on customer s request electrical equipment allowing the controll of lighting energy saving available reduction 60/50 mmí náhradních komponentů full production of luminaires in our firm - short delivery terms, easy availability of spare parts HORNET 150H-E HORNET 250S-T-3 100 150 200 3 15 250 300 300 3 15 400 500 Instruction for selection appropriate lamp to individual type of light fi tting available on www.vyrtych.com www.vyrtych.com 183
HORNET-P IP 43 / IP 65 pplication: pedestrian crossings. The correct installation ensures the visibility of pedestrians at the crossings. ody: ombination of plastic materials P (polycarbonate) and PP (polypropylene) over: Plastic material P (polycarbonate), optical, transparent colour Reflector: Polished aluminium reflector Fastening: Fastening on bracket and park columns with diameter 60 mm onnection: Screwless three-pole terminal block, max. diameter of wires 2,5 mm² (hydrophobic, oleophobic or antibacterial protection) 054052 HORNET-P-150S, 1x150W, right-hand 620 x 310 x 370 054051 HORNET-P-250S, 1x250W, right-hand 620 x 310 x 370 054050 HORNET-P-250H, 1x250W, right-hand 620 x 310 x 370 HST/E40 054053 HORNET-P-150S, 1x150W, left-hand 620 x 310 x 370 054054 HORNET-P-250S, 1x250W, left-hand 620 x 310 x 370 054055 HORNET-P-250H, 1x250W, left-hand 620 x 310 x 370 special equipment 001803 Reduction Ø 60 / 50 mm S high pressure sodium discharge lamp, H metal halide lamp Only for HIT, HST lamp (tubular lamps) Two-way traffic right-hand version One-way traffic right-hand version HORNET-P 1x150W Recommended installation: the height of the fixture above the road 6 m the distance from the edge of the road 0,5 to 1 m the distance in front of the pedestrian crossing max. 1 m 200 3 15 400 500 Instruction for selection appropriate lamp to individual type of light fi tting available on www.vyrtych.com 184
VV DINGO IP 54 pplication: outdoor areas, main and side roads of the cisis and villages, parking and industrial areas. ody: Plastic material GPR (polystyr filled with fibreglass), dark grey colour RL7031, flammability degree V-0 according to UL 94 standard (absolutely nonflammable) over: Plastic material P (polycarbonate), optical, transparent colour Fastening: Fastening by means of bracket grip (Ø75 mm, Ø60 mm), park pole grip (Ø60 mm), wall grip, corner grip. onnection: Screwless three-pole terminal block, max. diameter of wires 2,5 mm 2 VV DINGO 50W 051004 1VV-50S-PMM, 1x50W, build in fuse HSE, HST/E27 460 x 310 x 260 051012 1VV-50S-P, 1x50W, build in fuse HSE, HST/E27 460 x 310 x 260 051000 1VV-50S-PMM, 1x50W, without fuse HSE, HST/E27 460 x 310 x 260 051008 1VV-50S-P, 1x50W, without fuse HSE, HST/E27 460 x 310 x 260 VV DINGO 70W 051005 1VV-70S-PMM, 1x70W, build in fuse HSE, HST/E27 460 x 310 x 260 051013 1VV-70S-P, 1x70W, build in fuse HSE, HST/E27 460 x 310 x 260 051001 1VV-70S-PMM, 1x70W, without fuse HSE, HST/E27 460 x 310 x 260 051009 1VV-70S-P, 1x70W, without fuse HSE, HST/E27 460 x 310 x 260 051073 1VV-70H-PMM, 1x70W, build in fuse HIE, HIT/E27 460 x 310 x 260 051079 1VV-70H-P, 1x70W, build in fuse HIE, HIT/E27 460 x 310 x 260 051070 1VV-70H-PMM, 1x70W, without fuse HIE, HIT/E27 460 x 310 x 260 051076 1VV-70H-P, 1x70W, without fuse HIE, HIT/E27 460 x 310 x 260 VV DINGO 100W 051006 1VV-100S-PMM, 1x100W, build in fuse HSE, HST/E40 460 x 310 x 260 051014 1VV-100S-P, 1x100W, build in fuse HSE, HST/E40 460 x 310 x 260 051002 1VV-100S-PMM, 1x100W, without fuse HSE, HST/E40 460 x 310 x 260 051010 1VV-100S-P, 1x100W, without fuse HSE, HST/E40 460 x 310 x 260 051074 1VV-100H-PMM, 1x100W, build in fuse HIE, HIT/E27 460 x 310 x 260 051080 1VV-100H-P, 1x100W, build in fuse HIE, HIT/E27 460 x 310 x 260 051071 1VV-100H-PMM, 1x100W, without fuse HIE, HIT/E27 460 x 310 x 260 051077 1VV-100H-P, 1x100W, without fuse HIE, HIT/E27 460 x 310 x 260 DINGO-70S, 1x70W 240 320 3 15 DINGO-150S, 1x150W 80 120 160 200 3 15 VV DINGO 150W 051007 1VV-150S-PMM, 1x150W, build in fuse HSE, HST/E40 460 x 310 x 260 051016 1VV-150S-P, 1x150W, build in fuse HSE, HST/E40 460 x 310 x 260 051003 1VV-150S-PMM, 1x150W, without fuse HSE, HST/E40 460 x 310 x 260 051011 1VV-150S-P, 1x150W, without fuse HSE, HST/E40 460 x 310 x 260 051075 1VV-150H-PMM, 1x150W, build in fuse HIE, HIT/E27 460 x 310 x 260 051081 1VV-150H-P, 1x150W, build in fuse HIE, HIT/E27 460 x 310 x 260 051072 1VV-150H-PMM, 1x150W, without fuse HIE, HIT/E27 460 x 310 x 260 051078 1VV-150H-P, 1x150W, without fuse HIE, HIT/E27 460 x 310 x 260 S high pressure sodium discharge lamp, H metal halide lamp special equipment 001807 racket grip Ø 60 mm 051022 racket grip Ø 75 mm 001806 Pole grip Ø 60 mm 001810 Wall grip 001809 orner grip 141020 Fastening on concrete pole, Ø 220 mm, L=150 mm 141021 Fastening on concrete pole, Ø 250 mm, L=500 mm 001803 Reduction Ø 60 / 50 mm 001807 001810 001806 140020, 141021 www.vyrtych.com 185
ETY IP 44 pplication: outdoor areas, pedestrian zones, the roads, parking areas, gardens, squares. Flange: Plastic material P (polycarbonate), dark grey colour RL7031 Diffuser: Plastic material P (polycarbonate), tread pattern on the inner side over: Plastic material P (polycarbonate), dark grey colour RL7031 Fastening: Fastening by means of grip for park pole column with diameter 60 mm onnection: Screwless three-pole terminal block, max. diameter of wires 2,5 mm 2 053400 ETY-50S, 1x50W HSE, HST/E27 660 x 540 x 60 053401 ETY-70S, 1x70W HSE, HST/E27 660 x 540 x 60 053404 ETY-70H, 1x70W HIE, HIT/E27 660 x 540 x 60 053402 ETY-100S, 1x100W HSE, HST/E40 660 x 540 x 60 053405 ETY-100H, 1x100W HIE, HIT/E27 660 x 540 x 60 053403 ETY-150S, 1x150W HSE, HST/E40 660 x 540 x 60 053406 ETY-150H, 1x150W HIE, HIT/E27 660 x 540 x 60 special equipment 001803 Reduction Ø 60 / 50 mm S high pressure sodium discharge lamp, H metal halide lamp dvantages of the fixture easy installation original modern design usage of P material tested by 10 years operation removing gear trey colouring stability (UV stabil material) resistance against of corrosion reduction 60/50 mm Instruction for selection appropriate lamp to individual type of light fi tting available on www.vyrtych.com ETY170S, 1x70W 135 15 165 18 165 15 135 100 80 12 12 60 40 3 15 186
KIT IP 65 pplication: outdoor areas, main and side roads of the cities and villages, parking and industrial areas, pedestrian zones and parks. ody: Plastic material GPR (polystyr filled with fibreglass), grey colour over: Plastic material P (polycarbonate), transparent colour Reflector: White painted metal sheet RL9003 Fastening: Fastening by means of grip for park pole (-S) or bracket (-V) column onnection: Screwless three-pole terminal block, max. diameter of wires 2,5 mm 2 054101 KIT-136-V, 1x36W 640 x 190 x 215 054102 KIT-236-V, 2x36W 640 x 190 x 215 T-L/2G11 054104 KIT-136-S, 1x36W 640 x 190 x 215 054105 KIT-236-S, 2x36W 640 x 190 x 215 electronic ballast 054100 KIT-136-V-EP, 1x36W 640 x 190 x 215 T-L/2G11 054103 KIT-136-S-EP, 1x36W 640 x 190 x 215 MODEL V MODEL S KIT, 2x36W, IP65 120 3 15 160 200 www.vyrtych.com 187