Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Website: CLARK EQUIPMENT COMPANY dba BOBCAT COMPANY RANDY FUSS 250 EAST BEATON DRIVE P.O. BOX 6000 WEST FARGO ND 58078 701-241-8746 701-241-7860 randy.fuss@doosan.com www.bobcat.com Furnish separate price quote for: EXCAVATOR 1.1 Make & Model BOBCAT E63 Operating Weight 13,779 LBS Engine Make & Model Tier (Interim 4 or Final)? T4 HP at rated RPM (specify net or gross) Number of speeds 2 Max travel speed, MPH 2.9 MPH Drawbar pull, lbs. 12,346 LBS Shoe width, in. 15.7 INCHES # of rollers on lower track 5 ROLLERS Ground pressure, PSI 5.1 PSI Ground clearance, in. 25 INCHES Overall width of excavator 78 INCHES Main pump(s) total flow, GPM 34.9 GPM Swing speed, RPM 9.4 RPM Boom length, ft-in Arm length, ft-in Arm breakout force, Normal, lb-ft 5767 LBS Max dig depth, ft-in Reach at ground line, ft-in Dump height, ft-in 14 FT Lift over end, 10, lbs. 5902 LBS YANMAR 4TNV98C 59.4 HP @ 2100 RPM GROSS 9 FT 6 INCHES 6 FT 3 INCHES 13 FT 6 INCHES 20 FT 5 INCHES
Lift over end, max reach, lbs. Lift over side, 10, lbs. Lift over side max reach, lbs. Bucket breakout force, normal lb-ft. Tail swing radius, ft-in. Does excavator include bucket? If so, description Warranty Terms: hours/months/years 2805 LBS 3026 LBS 1361 LBS 9731 LBS 4 FT 3 INCHES NO 1 YEAR UNLIMITED HOURS Price $ 62,997.28
2.0 OPERATOR ENVIRONMENT OPTIONS Use this section to list operator options such as AC, fire extinguishers, etc. Number items starting with 2.1, 2.2, etc., 3.0 EXCAVATOR EXTERIOR AND POWERTRAIN OPTIONS Use this section to list items such as vandal proof cover, air filter, pre-cleaners, work lights, etc. Number items starting with 3.1, 3.2, etc. 4.0 UNDERCARRIAGE OPTIONS Use this section for wider track, plow blade, etc. Number items starting with 4.1, 4.2, etc. 4.1 Steel Tracks $ 762.20 5.0 HYDRAULICS OPTIONS 5.1 6.0 BOOM AND ARM OPTIONS 6.1 6.2 6.3 6.4 7.0 BUCKET/COUPLERS/TOOL OPTIONS 7.1 Model 15C Auger Drive Unit (E26, E32i, E32, E35i, E35, E42, E45, E50, E55, E63) $ 1,200.80 7.2 Model 15H Auger Hex Drive Unit (E26, E32i, E32, E35i, E35, E42, E45, E50, E55, E63) $ 1,200.80 7.3 Model 30C Auger Drive Unit (E26, E32i, E32, E35i, E35, E42, E45, E50, E55, E63, E80, E85) $ 1,611.20 7.4 Model 30H Auger Hex Drive Unit (E26, E32i, E32, E35i, E35, E42, E45, E50, E55, E63, E80, E85) $ 1,611.20 7.5 Model 35PH Auger Drive Unit (E42, E45, E50, E55, E63, E85) $ 2,447.00 7.6 Model 50PH Auger Hex Drive Unit $ 2,861.40 7.5 X-Change Auger Interface, 322 435, E26 - E55, E63 $ 224.20 7.10 HB980 Breaker (E32i, E32, E35i, E35, E42, E45, E50) $ 5,973.60 7.11 X-Change Mounting Cap (E32i, E32, E35i, E35, E42, E45, E50) $ 311.60 7.12 Hose Kit - E42, E50 Long Arm, E55 Long Arm, 337, 341, 435 $ 7.13 Hose Kit - E32,E35,E42,E45 - All with Long Arm $ 178.60 7.14 Hose Kit - E42,E45,E50 $ 7.15 HB1180 Breaker (E42, E45, E50, E55, E60*, E63, E80, E85) $ 7,854.60
7.16 X-Change Mounting Cap (E42, E45, E50, E55, E60, E63, E85) $ 421.80 7.18 Hose Kit-337, E42, E45, E50 $ 7.19 Hose Kit E60, E63,E80, E85 $ 209.00 7.20 12" Trenching Bucket, Smooth Lip (E42, E45, E50, E55, E60, E63) CLASS IV BUCKETS $ 619.40 7.21 12" Severe Duty Trenching Bucket, 3 Weld-On Teeth (E42, E45, E50, E55, E60, E63) CLASS IV BUCKETS $ 684.00 7.22 12" Trenching Bucket, 3 Weld-on Teeth (E42, E45, E50, E55, E60, E63) CLASS IV BUCKETS $ 630.80 7.23 18" Trenching Bucket, Smooth Lip (E42, E45, E50, E55, E60, E63) CLASS IV BUCKETS $ 699.20 7.24 18" Severe Duty Trenching Bucket, 4 Weld-On Teeth (E42, E45, E50, E55, E60, E63) CLASS IV BUCKETS $ 820.80 7.25 18" Trenching Bucket, 4 Weld-on Teeth (E42, E45, E50, E55, E60, E63) CLASS IV BUCKETS $ 763.80 7.26 24" Trenching Bucket, Smooth Lip (E42, E45, E50, E55, E60, E63) CLASS IV BUCKETS $ 779.00 7.27 24" Severe Duty Trenching Bucket, 4 Weld-On Teeth (E42, E45, E50, E55, E60, E63) CLASS IV BUCKETS $ 953.80 7.28 24" Trenching Bucket, 4 Weld-on Teeth (E42, E45, E50, E55, E60, E63) CLASS IV BUCKETS $ 839.80 7.29 30" Trenching Bucket, Smooth Lip (E42, E45, E50, E55, E60, E63) CLASS IV BUCKETS $ 867.92 7.30 30" Trenching Bucket, Severe Duty, with 5 Weld-on Teeth (E42, E45, E50, E55, E60, E63) CLASS IV BUCK$ 1,065.52 7.31 30" Trenching Bucket, with 5 Weld-on Teeth (E42, E45, E50, E55, E60, E63) CLASS IV BUCKETS $ 923.40 7.32 36" Trenching Bucket, Smooth Lip (E42, E45, E50, E55, E60, E63) CLASS IV BUCKETS $ 953.80 7.33 30" Trenching Bucket, Severe Duty, with 6 Weld-on Teeth (E42, E45, E50, E55, E60, E63) CLASS IV BUCK$ 1,151.40 7.34 36" Trenching Bucket, 6 Weld-on Teeth (E42, E45, E50, E55, E60, E63) CLASS IV BUCKETS $ 1,022.20 7.35 39" Grading Bucket, No Teeth (Not approved with E42, E45, E50, E55 or E60) $ 744.80 7.36 52" Grading Bucket, No Teeth (E42, E45, E50, E55, E60, E63) CLASS IV BUCKETS $ 915.80 7.37 55" Grading Blade (E42, E45, E50, E55, E60, E63) CLASS IV BUCKETS $ 551.00 7.38 Hydraulic Clamp, (Incls cylinder, hoses & pins) (E60, E63) $ 2,071.80 7.39 Hydraulic Clamp, (Incls cylinder, hoses & pins) (E80, E85) $ 2,071.80 7.40 3-Tine Grapple, CLASS III (X-Chg System Required) (E42, E45, E50, E55, E60, E63) $ 516.80 7.41 Hydra-Tilt (E26, E32i, E32, E35i, E35, E42, E45, E50, E55, E60) $ 1,542.80 7.42 Excavator Hose Kit 6729174(175) (E42, E45, E50) (E26, E32i, E32, E35i, E35, E42 E45 All with Long Arm $ 223.00 7.43 Excavator Hose Kit 6729176 (E50 Long Arm, E55) $ 238.20 7.44 Packer Wheel (E26, E32i, E32, E35i, E35, E42, E45, E50, E55, E60) $ 1,535.20 7.45 PCF34 Plate Compactor (E32i, E32, E35i, E35, E42, E45, E50, E55, E60, E63) $ 3,851.40 7.46 Mounting Frame - PCF34 (E32i, E32, E35i, E35, E42, E45, E50, E55, E60, E63) X-Change Mounting Cap (Must also order hose kit) $ 311.60 7.47 Hose Kits for PCF34 and PCF64 Plate Compactors (All Long Arm Excs and E55) $ (All Std Arm Excs) (not including E60, E63, E80, E85) $ 140.60 7.48 PTX3 (E26, E32i, E32, E35i, E35) $ 3,553.00
7.49 Frost & Rock Ripper (E26, E32i, E32, E35i, E35, E42, E45, E50, E55, E60, E63) $ 722.00 7.50 HB1380 Breaker (E60*, E63, E80, E85) $ 9,747.00 7.51 X-Change Mounting Cap (E60, E63) $ 463.60 7.52 Pin-On Mounting Cap (E80, E85) $ 547.20 7.53 Hose Kit-E60,E63, E80, E85 $ 209.00 7.54 HB2380 Breaker (E80, E85) $ 11,977.60 7.55 Pin-On Mounting Cap (E80, E85) $ 547.20 7.56 Hose Kit-E80, E85 $ 209.00 7.57 18" Trenching Bucket, with 3 Weld-On Teeth (E80, E85- Pin-On Buckets) $ 851.20 7.58 24" Trenching Bucket, with 4 Weld-On Teeth (E80, E85- Pin-On Buckets) $ 972.80 7.59 36" Trenching Bucket, with 5 Weld-On Teeth (E80, E85- Pin-On Buckets) $ 1,219.80 7.60 54" Grading Bucket, No Teeth (E80, E85- Pin-On Buckets) $ 1,531.40 7.61 48" Tilting Grade Bucket, No Teeth (E80, E85- Pin-On Buckets) $ 5,688.60 7.62 Coupler, Pin Grabber** 7171904 (E85) $ 1,869.60 7.63 Coupler, Pin Grabber** 7171906 (E85) $ 1,945.60 7.64 Ripper Tooth, Pin-On (E80, E85) $ 1,052.60 7.65 48" Tilting Grade Bucket, No Teeth (E80, E85) $ 5,688.60 8.0 COMPLETE SET OF OEM AIR AND FLUID FILTERS $ 225.01 9.0 INSTALLATION: HOURLY LABOR RATE FOR ATTACHMENT INSTALLATIONS, ETC.: (See Special Terms and Conditions) $ 90.00 10.0 OEM EXTENDED WARRANTY OPTIONS Use this section to offer performance/warranty options, number these items starting with 10.1, 10.2, etc. (Specify years, miles or hours extended term covers.) 10.1 2YR/2000HR FULL COVERAGE $ 2,835.00 10.2 3YR/3000HR FULL COVERAGE $ 5,529.00 11.0 NEW EQUIPMENT RENTAL PROGRAM If rental programs are available on the new equipment offered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent of rental fee paid by the purchaser that will be applied to the purchase price. See Solicitation Special Terms & Conditions.
11.1 Summer Rental Rate - April 1 through Sept 30. Summer Hourly Rental Rate: N/A Summer Weekly Rental Rate: N/A Summer Monthly Rental Rate: N/A Percent (%) of Rental Fee applied to purchase price: N/A N/A Winter Rental Rate - October 1 through March 31 N/A 11.2 Winter Hourly Rental Rate: N/A Winter Weekly Rental Rate: N/A Winter Monthly Rental Rate: N/A Percent (%) of Rental Fee applied to purchase price: N/A If the new rental equipment is purchased and finance charges are applicable for the actual rental term only, state the actual interest rate here: N/A 12.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAM See Solicitation Special Terms and Conditions. DEDUCT cost per Used Hour from the original Contract Price N/A 13.0 DISCOUNT OFF LIST PRICE FOR RELATED PARTS 0 % Discount AND ACCESSORIES - (See Special Terms and Conditions) Price List Date and Identification Number 10/1/2014 14.0 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED DELIVERY STARTING POINT - City, State, Zip GWINNER ND 58040 Price per loaded mile 0 MINIMUM DELIVERY CHARGE (if any) 0