Thermal Overcurrent Circuit Breaker 0-F... Description An extremely versatile range of rocker switch/thermal circuit breakers (S-type TO CBE to EN 6094 with trip free mechanism) offering the choice of single pole, double pole with single pole protection, and double pole with protection on both poles. Designed for snap-in panel mounting with versions available for three different panel cut-out sizes. Illumination is optional and there is a range of colours and markings for the rocker. Add on modules: l Under voltage release coil (for double pole versions only). l Magnetic trip coil for short circuit protection. l Magnetic trip coil for remote relay trip. l Auxiliary contacts for status signalling. Approved to CBE standard EN 6094 (IEC 6094). Meets the requirements regarding fire resistance of EN 605- : 007-0 Safety of household and similar electrical appliances. Typical applications Motors, transformers, solenoids, extra low voltage wiring systems, office machines, electro-medical equipment, power supplies, communications systems, medical equipment to EN 6060. Standard current ratings and typical internal resistance values Current rating (A) Internal resistance per pole (Ω) Current rating (A) Illumination voltage/power consumption Internal resistance per pole (Ω) 0. 94 4 0.045 0. 4 4.5 0.045 0. 5 0.05 0.4 5.0 6 0.05 0.5 4.0 7 0.065 0.6.90 8 0.065 0.8.50 < 0.0 0.9 < 0.0. 0.80 4 < 0.0.5 0.45 5 < 0.0 0.7 6 < 0.0.5 0.0785 8 < 0.0 0.0595 0 < 0.0.5 0.0565 operating voltage power consumption Y R G V DC 5, ma ma,4 ma 4 V DC 4,5 ma, ma,6 ma 5 V AC,8 ma, ma ma 0 V AC, ma 0,9 ma 0,9 ma 0-F...F5 0-F7 Technical data For further details please see chapter: Technical Information Voltage rating AC 40 V; (AC 5 V to special order) (UL: AC 50 V; ) Current ratings 0...0 A (up to 0 A to special order, single pole only) Typical life -pole AC 40 V: 0...0 A 0,000 operations at x I N, inductive : 0...4 A 0,000 operations at x I N, inductive 4.5...6 A 0,000 operations at x I N, resistive DC 8 V: 0...0 A 0,000 operations at x I N, inductive -pole AC 5 V: 0...6 A,000 operations at x I N, inductive AC 40 V: 0...6 A 50,000 operations at x I N, inductive 7...0 A 0,000 operations at x I N, inductive : 0...6 A 50,000 operations at x I N, inductive 7...0 A,000 operations at x I N, inductive Ambient temperature -0...+60 C (-...+40 F) Insulation co-ordination rated impulse pollution (IEC 60664 and 60664 A withstand voltage degree.5 kv reinforced insulation in operating area Dielectric strength (IEC 60664 and 60664A) test voltage operating area AC,000 V between poles (-pole) AC,500 V Insulation resistance > 0 MΩ (DC 500 V) Interrupting capacity I cn 0... A x I N.5...0 A 50 A -pole, or 50 A -pole Interrupting capacity (UL 77) Degree of protection (IEC 6059/DIN 40050) Vibration Shock Corrosion Humidity Mass I N U N I nc, -pole 0...0 A AC 50 V 5000 A, -pole 0...0 A 00 A operating area IP40 (IP54 with water splash protection) terminal area IP00 8 g (57-500 Hz), ± 0.6 mm (-57 Hz) to IEC 60068--6, test Fc frequency cycles/axis 0 g ( ms) to IEC 60068--7, test Ea 96 hours at 5 % salt mist, to IEC 60068--, test Ka 40 hours at 95 % RH, to IEC 60068--78, test Cab approx. g (double pole) approx. 7 g (single pole) 05/6 www.e-t-a.de - 6
Thermal Overcurrent Circuit Breaker 0-F... Ordering information Type No. 0 rocker switch/circuit breaker Mounting F snap in frame Size of frame to fit mounting cut-out 50.5 x.5 mm panel thickness: -6.5 mm (.09-.50 in) 5 to fit mounting cut-out 44.5 x mm panel thickness: -4 mm (.09-.57 in) 7 to fit mounting cut-out 44.5 x mm panel thickness: -4 mm (.09-.57 in) Number of poles 0 -pole, unprotected, switch only -pole, thermally protected -pole, thermally protected 5 -pole, -pole thermally protected Mounting frame design (F & F5) collar height mm collar height 9 mm 4 collar height mm with water splash protection (IP54) Mounting frame design (F7) R black T black with snap-on splash cover Terminal configuration P7 blade terminals, standard for curve T (thermal circuit breaker) H7 as P7, terminals and with flat head screws M.5 standard for units with undervoltage release module N7 as P7, but with additional shunt terminals (i) and (i) standard for version Q (switch only) Characteristic curve T thermal.0 -.4 x I N Q switch only Actuator style W standard rocker (F & F5) A specially designed rocker (F7) Colour and Illumination 0. rocker black opaque without illumination 0. rocker white opaque without illumination 04. rocker red opaque without illumination 4. R rocker red translucent with LED-illumination 5. Y rocker orange translucent with LED-illumination 9. G rocker green translucent with LED-illumination Rocker markings for F and F5 A D F Q X Q 0 I I 0 ON OFF A D F X Q: as D, but moulded in X: without markings Rocker markings for F7»I«and»O«moulded in Illumination voltage range - 4 V DC 0-8 V DC 90-40 V AC 4 85-75 V AC Current ratings 0...0 A 0 - F 7 R - P7 T - A 4 Q R 4 - A ordering example 0 - F. 0. - N7 Q - W..... - 0 A (switch) Dimensions Style F7.R Style F7.T 8.9.0.50.0 5.6.7.4.5.6 (QC x.) flat head screw ISO580 M.5x5-MS 4.4 8.6.7.7.4.5 (QC x.) flat head screw ISO580 M.5x5-MS 48 ±0..89 ±.008 44.-0..74-.008 LINE 60.6 44.8.76 LINE.6 Standard current ratings (A).94.5.45.94 0.5 4 5 6 8 5 6 0 F/-pole protected 0-F-P7T- x x x x x x x x W0D- 0.5 4 5 6 8 5 6 0 F /-pole protected 0-F-P7T- x x x x x x x x x x x x x W0D- 0.5 4 5 6 8 5 6 0 F5/-pole protected 0-F5-P7T- x x x x x x x x x x x x W0D- F7/-pole protected 0-F7R- P7T-A4QR4 Standard current ratings (A) 0.5.5 4 5 6 8 5 6 0 x x x x x x x x x x x x x x - 64 www.e-t-a.de 05/6
Thermal Overcurrent Circuit Breaker 0-F... Internal connection diagrams Mounting style variants -pole, thermally protected on both poles Dimensions Style F. collar height mm/.09 in. 5 76.60.76 5.8.0 line (i) (k) (k) load -pole, thermally protected line (i) (k) load (i) (i).7.5.4.6 (QC x. ) flat head screw ISO580 M.5x5-MS Installation drawing -pole, thermally protected on one pole only line (i) (k) load -pole, unprotected line (i) Actuating force max. 5 N optional illumination in ON position OFF position 54. load (i) (i).94 Style F. collar height 9 mm (.54 in.) 5 9.8.54.0 Style F.4 collar height mm (.079 in.), with water splash protection.8.50.94.0 Style F 5. 7 5 9.5.768.7.5.4 (QC x.) flat head screw M.5x5-MS ISO580 5.8.76.0 7.06 9.5.768 5 6.60.7.4 (QC x.) flat head screw M.5x5-MS ISO580.7.4 (QC x.) flat head screw M.5x5-MS ISO580 Cut-out dimensions.5.5.6.6 54. 5.8.6 56. 5.8 48.89 Optional illumination.94.94.94 When installing the circuit breaker apply pressure on bezel only operating area.94 7 7 8 7.76.76.5.76.94 mounting area This is a metric design and millimeter dimensions take precedence ( mm ) inch.6 Cut-out for mounting style -F with rocker and push button -6.5.09-.50.5 +0..846 +.008-0.4 -.06-0. -.008 max. R max.079 ±0.05 ±.00 50.5 +0..99 +.0 min..5 min.098 max. R0. max.0 Cut-out for mounting style -F5/-F7 with rocker -4 mm.09-.57 in. max. R0. max.0 panel thickness dimension A - 0.4 -.06-0. -.008 max. R.5 max.059 ±0.05 ±.00 44.5 +0..75 +.008 Edges of working parts: ISO 75 min. min.079 +0..866 +.0 mm. +0.4.6 +0.8.4 + inch.047 +.06.06 +.0.094 +.09 +0, 45-0.05 45 +. +. mm - 0.05 45-0.05 inch.77 +.008.77+.04 +.087 -.00 -.00.77-.00 05/6 www.e-t-a.de - 65
Thermal Overcurrent Circuit Breaker 0-F... Typical time/current characteristics Approvals single or double pole load 0. A 000 Trip time in seconds 00 0 +60 C +40 F + C +7.4 F -0 C - F Authority Standard Rated voltage VDE IEC/EN 6094 AC 5 V AC 40 V DC 8 V UL UL 77 AC 50 V AC 50 V CSA C. No 5 AC 50 V AC 50 V CQC GB 770 AC 40 V Current ratings 0. A 6 A (-pole) (-pole) 0. A 4 A (-pole) 0 A ( poles in parallel) 0. A 6 A 0 A ( poles in parallel) 0..5 0 A 000 00 4 6 8 0 40 times rated current +60 C +40 F + C +7.4 F -0 C - F Trip time in seconds 0 0. 4 6 8 0 40 times rated current The time/current characteristic curve depends on the ambient temperature prevailing. In order to eliminate nuisance tripping, please multiply the circuit breaker current ratings by the derating factor shown below. See also section Technical information. Ambient F temperature C - -0-4 -0 +4 - + 0 +7.4 + +4 +40 + +50 +40 +60 Derating factor 0.8 0.76 0.84 0.9.08.6.4-66 www.e-t-a.de 05/6
Thermal Overcurrent Circuit Breaker 0-F... Accessories Insulated cover Y 0 068 0 9.54.5.098 Rear terminal shroud black (IP64) Y 04 75 0 40.5.59 +0.5.75-0.5.069 +.00 -.0 0.5.807 0.787 Terminal adapter Y 0 86 0 0.9.05 50.94.97.5.5 4.57 4.57 R.5.7.46 blade terminal DIN 4644-C-Ms-S (QC x.) Spacer for 0-F... Y 0 675 0/0 58.8 50.5.99.866 8. Spacer for 0-F5... Y 0 676 0 5.05 44.5.75 * * Y 0 675 0 suitable for panel thickness < mm (.079 in) * Y 0 675 0 suitable for panel thickness < 4 mm (.57 in).09 Blanking piece in -F frame Y 0 885 54.. 5 6.5.650.0 6.4 70 +5.76 +.97 ø8.5 Water splash cover, transparent (IP66) for style -F5.. X 69 0 48.89 ø8.5 6.5 5.650.4.4 ø4.4.7 60.6 7.87 5.8.09.5.886 8. sharp-edged without bends 0.8.0.5.098.09 matt finish This is a metric design and millimeter dimensions take precedence ( mm ) inch All dimensions without tolerances are for reference only. In the interest of improved design, performance and cost effectiveness the right to make changes in these specifications without notice is reserved. Product markings may not be exactly as the ordering codes. Errors and omissions excepted. 05/6 www.e-t-a.de - 67
Appliance inlet module X0 for circuit breaker type 0-F5/-F7/-F8 Description The appliance inlet module X0 with circuit breaker type 0-F5/ -F7/-F8 combines three functions within a single component: A C0 appliance inlet, a rocker-actuated or push button switch and resettable overcurrent protection. Screw-type mounting from the front or from the rear. Typical applications Electrical medical apparatus, laboratory equipment, professional audio equipment and office machines. Order numbering code Type No. X0 Appliance inlet module for circuit breaker type 0 Module B appliance inlet C0 Version 04 screw-type mounting Accessories 00 without Version 00 not wired; mounting position 0: ON position to connector 0 not wired; mounting position 0: OFF position to connector (standard) Assembly status M module supplied with circuit breaker 0 fitted Technical Data Rated voltage AC 40 V Current rating 6 A (IEC) 0 A (UL/CSA) Ambient temperature -5 C...+ 70 C Number of poles L, N + earth Protection class: I Mounting method: screw-type mounting (front or rear) Connection: blade terminals DIN 4644 6.mm x 0.8mm Housing material: thermoplastics, black UL94V-0 Appliance inlet: C0 according to IEC/EN 600-, UL498 Mains switch: Circuit breaker 0-F5/-F7/-F8 (0-F8 with push button actuation: technical data upon request) Dimensions circuit breaker 0 5.5 X0- B 04 00 0 M ordering example 90 0 Approvals ENEC, UL, CCC 7 n. 47 6 Cut-out dimensions 79.5 [0.5] M/ n..5 [0.] 90 [0.] - 68 www.e-t-a.de 05/6