48 65 85 100 130 200 High rigidity, accuracy and positioning repeatability on large variety of sizes.
48 65 85 100 130 200 High rigidity, accuracy and positioning repeatability on large variety of sizes Long History vs. Rotary systems Key Features High Repetitive positioning High Performance belt transmission with micrometric calibration inextensible to nominal torques even during bi-directional events High Precision positioning. Insignificant Backlash Hostile environments approved (Belt may operate from -30 + 100 C) Open through-hole Versatile Connection Chuck with several screw holes connections AW optional Stepper or Brushless motors with high efficiency gearbox AW optional incremental Encoder up to 10000 Pulse/Round AW Optional HPR accuracy position booster Gearbox with reduction from 4-6-8. Custom solutions available Benefits Excellent performance / price ratio, long life and maintenance free Variety of Application, freedom to use customer electrical choice Different models, well balanced for each torque and dimension Possibility of usage in Hostile environment (Belt temperature exposure from -30 to +100 C) Easy installation under any condition (Easy Software to support the application) Easy to combine with Grippers or other mechatronics systems Motor positioning in each side Adaptable to others solution Fully supported by Easy software control system A new selection of rotary actuators Rotac Plus - completes the product portfolio of. Experience and know-how are the fundamental drivers of the new generation of Actuators. The family was re-designed to offer the best rigidity and very accurate positioning keeping, even in applications with heavy loads. There are several innovations embedded on the new Rotac Plus. The transmission system is based on a new generation of performance belt combined with high quality duplex bearings, and calibrated with a unique micrometric system to maintain the best repetitive positioning in operation. The new Rotac Plus are modular, so while customers may choose preferred motors and drivers, the mechanical transmission component maintains the highest position repeatability. Accuracy may also be boosted by customer needs when selecting the best encoding resolution according with the specific application. is offering, as an option, the full solution to reach extreme accuracy and best repetitive positioning. Product ranges are based on the following sizes 48, 65, 85, 100, 130, and 200 built in a solid monolithic aluminum system with high quality finishing surfaces and screw holes in each side to offer easy installation. Rotac Plus is using a hi-tech transmission block to avoid any belt extension or contraction effects; In addition, the micrometric calibration system is offering the best accuracy and precise repetitive positioning. The solid mechanical layout grants customers a perfect match to their own electrical system (Motor and controls), thus offering a real alternative to most of today s embedded solution, giving the possibility to use an harmonized control system. is offering a full set of Motors - Brushless o Stepper - fully controllable with high incremental encoders or absolute encoder (Optional). Unit may be programmed through our software Easy having the possibility to set-up up to 64 angular positions (EASY ). 2 3
Application Electronics production Components mounting, combinable with Pick and Place system for fast and accurate rotation. HPR option available for extreme accuracy needs Inspection or quality probing system Quality control for several application areas where accurate probing and positioning may be required for accurate and repeatable rotation Laser Scanning Mirror based applications to apply bar code scanning or simple Lidar detections. May be used for inspections or material detection or Laser Radar scanning Packaging and or Material motion Rotation applied to packaging system may be in combination of other linear units, wherever is required high precision and repeatable positioning. Aerospace and Defense Several military applications may not need MIL approved actuators, wherever price performances are required General industry production Automotive production line, where rotation is essential vs. glass insertions or components translation Machine tools Useful in tools replacements or when change of format is required. HPR option may be essential for this application Production and fulfillment Best way to control acceleration on critical fulfillment to avoid liquid waste. Very useful for DNA probing, or Biological analysis 4 5
Micrometric Calibration System Mandrel with pin references and several holes for an easy connectivity to tables or accessories High Performance Rotary Actuator based on a solid monolithic system, providing precise accurate and repeatable positioning Solide Double Bearing System with lubrifications free Isolated IP65 Belting High performance system, offering high protection for hostile environment (-30º + 100º C) Solid Double Bearings System with lubrifications free Isolated IP65 Pulley with Backlash 0 Planetary High efficiency gearbox Encoder Stepper or Brushless motor driver High resolution encoder for precise and accurate positioning Option HPR (High Position Repeatability up to º 6 7
Configuration of Rotac Plus using the software application EASY Models and Specifications Stepper : ROTAC PLUS - Hollow Rotary Actuator Description MU Rotac 48 Rotac 65 Rotac 85 Rotac 100 Rotac 130 Rotac 200 Maximun Torque Nm 1,2 3 3,6 9 22 40 Belt Ratio ic 3 3 3 3 3 3 Motor Type/Model STEPPER (450rpm) Nm 0,4-Nema 17 1,0-Nema 23 1,8-Nema 23 3,0-Nema 24 7,0-Nema 34 12,8-Nema 34 Encoder Resolution Pulses /Round 10000 10000 10000 10000 10000 10000 Motor Inertia Kgcm2 0,05 0,48 0,48 0,84 2,00 2,90 Max Output speed rpm 150 150 180 150 150 150 The Easy software application may be installed on a normal PC or Tablet, the connection to the system electronic device can be made via USB or serial interface. The following figure shows an example of main menu display. Max load inertia Kgcm2 4,86 43,2 43,2 75,6 180 261 Permissive Thrust Load N 860 880 1360 2560 4000 7800 Position repeatibility +/- 0,012 0,012 0,012 0,012 0,012 0,012 Position repeatibility (Option HRP-S) +/- 0,006 0,006 0,006 0,006 0,006 0,006 Hall Home Sensor PNP PNP PNP PNP PNP PNP Driver Control Model AW DPC 48 AW DPC 48 AW DPC 48 AW DPC 48 AW RS AW RS There are different ways to move the actuator, one possibility is to define a sequence to complete a full rotation of 360 (as indicated on the figure). When set-up is complete, the position may be recalled by Digital I/O available on the Motor control system. Software & Network Easy Rot Easy Rot Easy Rot Easy Rot Easy Rot Easy Rot Brushless : ROTAC PLUS - Hollow Rotary Actuator Description MU Rotac 48 Rotac 65 Rotac 85 Rotac 100 Rotac 130 Rotac 200 Maximun Torque Nm 1,2 3 3,6 9 22 70 Belt Ratio ic 3 3 3 3 3 3 Planetary Gearbox part / / AWRL50 AWRL50 AWRL70 AWRL90 Gear Ratio ig 4-6-8 4-6-8 4-6-8 4-6-8 Motore Type/Model Brushless (1000rpm) W 200 400 400 400 600 2000 Max Torque vs ratio factor Nm 0,47 1,18 0,5-0,33-0,25 0,88-0,58-0,48 2,1-1,4-1,1 6,9-4,6-3,4 The application offers up to 64 different positions, each may be reached with different speed and acceleration. Each position may also be defined in absolute or relative value according to the starting point. For each position (In succession or randomly), the Action command allows to simulate the automatic positioning of the actuator. Every time the command is executed, the actuator will move to the adequate position in accordance with the set-up indications; The display will also provide a graphical indication of each reached point. Motor Inertia Kgcm2 0,2 0,4 0,4 0,4 0,6 3,4 Max Output speed rpm 1000 1000 250-165-125 250-165-125 250-165-125 250-165-125 Max load inertia Kgm2 Position repeatibility (res. 2000 i/g) Position repeatibility (Option HRP-B) 0,028-0,064-0,115 0,057-0,129-0,230 +/- 0,06 0,06 +/- 0,012 0,012 Backlash +/- 0 0 0,057-0,129-0,230 0,057-0,129-0,230 0,086-0,194-0,345 0,48-1,10-1,95 Permissive Trust Load N 860 880 1360 2560 4000 7800 Hall Home Sensor part PNP PNP PNP PNP PNP PNP Control Driver part AW RB AW RB AW RB AW RB AW RB AW RB Software & Network part Easy Rot Easy Rot Easy Rot Easy Rot Easy Rot Easy Rot 8 9
H1 Rotac Plus Components System Accessories L A ØC L1 ØC1 ØC2 M1 L2 L3 ØD H7 B H A1 L ØI E M2 M4 ØD M3 E1 E2 A2 FØF 3 DIMENSIONS: Rotac Plus Series AVAILABLE OPTIONS ROTAC PLUS POSITION DESCRIPTION 1 Motor and Encoder (Stepper or Brushless) 2 Electronics Control 3 Hall Effect Sensor 2 1 Size Rotac Plus UM Rotac 48 Rotac 65 Rotac 85 Rotac 100 Rotac 130 Rotac 200 A mm 40 50 70 80 110 170 A1 mm 40 50 70 80 110 170 A2 mm 45,5 70 52,5 95 93 135 B mm 24,5 35 42,5 50 66,8 100 ØC h7 mm 40 58 70 75 100 140 ØC1 mm 32 50 62,5 65 90 110 ØC2 mm 16 25 30 55 80 125 ØD mm - - - - 79 110 E mm 40 50 45 50 70 - E1 mm - - 40 50 13 - E2 mm 15,5 20 7,5 17 - - F mm *F *F *F *F *F *F ØF mm - - 40 50 70 90 G1 mm - - - - 31,5 39 H mm 60 60 60 60 60 60 H1 mm 30 30 30 30 30 30 I mm 42 62,7 60 93 100 159,5 L mm 90 130 130 185 215 320 L1 mm 48 65 85 100 130 200 L2 mm 28 28 30 58 63 78 L3 mm 10 12 13 12 10 15 M1 mm N 6 M4x8 N 6 M5x10 N 6 M4x10 N 6 N6x12 N 6 M8x16 N 6 M10x25 M2 mm N 4 M4x12 N 4 M5x12 N 4 M6x12 N 4 M6x20 N 4 M8x16 N 4 M12x25 M3 mm - N 2 M5x12 - - N 4 M5x10 N 8 M6x12 M4 mm N 2 M4x12 - N 4 M4x12 N 4 M4x10 N 4 M5x10 - ØS H7 mm 4x5 4x5 N 2 4x10 N 2 6x12 N 2 6x12 N 2 8x12 *F = variable depending on the gearbox ratio and the engine 11
Know How founders developed a multi-years experience in the automation industry. has been founded more than 10 years ago. During these years activities have been focused on components for automatic packaging, displacement and movement of materials. Solutions offered by include both single mechanical components and integrated packaged solutions for linear and rotary applications, based on componenets provided by top tier industrial partners. s.r.l Via Arino, 26A 30031 Arino di Dolo, Venezia Italia Telefono 0039 (0)41 51 02 028 Telefax 0039 (0)41 51 02 187 Internet e.mail info@automationware.it follow us on linkedin 2016 by - This brochure contains only indicative specifications. reserves the right to modify the technical specification at any times and without prior notice. For more precise and accurate product information, please refer to the technical datasheet and/or visit us at Rotoc Plus 16.12.2016 EN