S. K. Industrial Corporation

Similar documents

Item Code Description Unit Qty Total

List of materials for 1Km. Of L.T line 1-Ph., 2-Wire AB cable (1 X 25+1X16) sq.mm using 8M X 200 KG. PSC Pole

MATERIAL FOR FIBRE OPTIC LINES. General C-bracket HSU trunnion type, forged, for aluminium based OPGW conductors...

SUSPENSION 04 CLAMPS

EARTH WIRE FITTINGS 08

OPTOFIT CATALOGUE. FITTINGS FOR METALFREE (ADSS CABLES) and METAL ARMOURED (OPGW & OPPW) AERIAL CABLES WITH INTEGRATED OPTICAL FIBRES.

Annexure B (1)- Engineering Instructions for Installation of Aerial OFC

PROPOSED COST SCHEDULE OF MATERIALS FOR CONSUMER JOB AND OTHER JOBS

NATIONAL POWER INDUSTRIES

Distribution networks : Low Voltage Aerial Cables

Helical dead-ends are installed on ADSS cables over medium spans (100 to 250 meters).


SPACERS AND SPACER DAMPERS

ANNEXURE-I : LIST OF ITEMS H.O. PURCHASE ITEM LIST:

Section 7 - Hardware & Fittings

Contents Stay Rod Assembly Base Plates Cross Arms A Frames Platforms Threaded Rods Threaded Rod Assembly Overhead Line Hardware Stringing Hardware

CONTENTS. iii. Foreword Preface Chapter 1- Design Parameters for Transmission Lines

PART NUMBER POLE DIAMETER RANGE CARTON QTY " to 5" " to 6 3 4" " to 7 3 4" " to 8 3 4" 10

EXCLUSIVE AUSTRALIAN DISTRIBUTORS

Standard Compression Dead End for ACSR and ACSS Conductor CAUTION: ACSR Dead Ends Cannot Be Used on ACSS HT Conductor


MOSDORFER INDIA. Fittings and damping systems for overhead transmission lines

EARTHING AND SHORT CIRCUIT LANCE DEVICE RAILWAYS


LINE FITTINGS I N D E X

OVERHEAD DESIGN MANUAL

Conductor. Isolators. Technical Specification:- Sr.N Description of Item Offered value. DC Resistance at 20 C (Ohms/Km) Weig ht (Kg.

Company Profile. ZTT Cable was established in 1992, and now becomes a public high-tech enterprise with 33 subsidiaries, and about 7,000 employees.

SYLLABUS FOR ELECTRICAL SUPERVISOR CERTIFICATE OF COMPETENCY (SCC MV) Electrical Engineering Paper (Written Test)


Machinery & Spareparts Centre

SUSPENSION 04 CLAMPS

DISTRIBUTION catalogue

HIGH-VOLTAGE TRANSMISSION AND DISTRIBUTION LINE FITTINGS FOR kv

TENSION CLAMPS AND JOINTS. General Wedge tension clamp without jumper guide, for aluminium based conductors... 79

SERVICE ATTACHMENT ON A BUILDING WITH BUS DUCT SERVICE ENTRANCE AND INDOOR METERING

DISTRIBUTION OHL FITTINGS. General Insulator pin straight with round thread, according to ÖNORM E

TECHNICAL SPECIFICATION FOR SHACKLE HARDWARE FITTINGS SUITABLE FOR TENSION STRING TO BE USED FOR 11KV LINE

TECHNICAL SPECIFICATIONS OF HARDWARE & ACCESSORIES ACSR MOOSE CONDUCTOR FOR 400 KV TRANSMISSION LINE WITH QUAD ACSR MOOSE

New Bombay Hardware Traders Pvt. Ltd.

Power Transmission Equipment. Allbest Creative Development Ltd. (ALLBEST)

INFRASTUCTURE 6000 sq. ft. of cover CNC shed housing machines threading of upvc pipes.


TOP-PRIORITY TREATMENT WHEN IT MATTERS MOST

INSTALLATION INSTRUCTION 88092

BID No.SE/O&M/Amt./T/14-15/T-27 DPDC Full Turnkey SN Description Unit Unit Rate (Rs) Qty

TRANSPOWER PLANS, BUILDS, MAINTAINS AND OPERATES NEW ZEALAND S HIGH VOLTAGE ELECTRICITY TRANSMISSION NETWORK THE NATIONAL GRID.

SPIRAL VIBRATION DAMPERS FOR AAC, AAAC, ACSR, COPPER, SC/AC & SC/GZ CONDUCTORS. Part Number

M.K.Forge ISO 9001:2008 CERTIFIED. Specialist in: transmission stringing line, lifting tackles and all types of Forging

GUJARAT ENERGY TRANSMISSION CORPORATION LIMITED SARDAR PATEL VIDYUT BHAVAN RACE COURSE, VADODARA TENDER FOR

THERMOLIGN Products for 3M Aluminum Conductor Composite Reinforced (3M ACCR)

COURSE: Power Generation and Economics DEPARTMENT: Electrical and Electronics Engineering ACADEMIC YEAR: COURSE CODE: 15EE42 SEMESTER: IV TOTA

Overseas Information. Tender Information

Volume-III : Section-I 370 Technical Specifications

Chapter 1. Connectors & Fittings for Railways

Table of Contents. 1 General. 2 General Safety Precautions and Guidelines. 3 Clearances

STRAIN LINK STICK ROLLER LINK STICK ADJUSTABLE STRAIN POLES SPIRAL LINK STICK TRANSMISSION TOOLS

Makali Engineering Corporation

Larsen & Toubro Ltd. Power Transmission & Distribution - IC Project Name: RGGVY PH - II, Jaunpur. Vendor & GTP Approval Submission Vs Approval Status.

TECHNICAL SPECIFICATIONS OF HARDWARE & ACCESSORIES TWIN AL59 CONDUCTOR FOR TRANSMISSION LINE

Read me first!... 3 Important precautions Table of contents. About your G Lasher Using your G Lasher Appendix: Parts summary...

Electrical connection systems

WESTERN ELECTRICITY SUPPLY COMPANY OF ORISSA, WESCO. GUARANTEED TECHNICAL PARTICULARS 1 of 2

Distribution Design Catalogue

The reinforcing rods are incorporated in this assembly to ensure the optical fibres within the OPGW Range

Distribution Design Catalogue

B Polyethylene Tape. B Splicing Covering. Holster

34.00 METERING GENERAL LABELING MULTIPLE METER ENCLOSURES ON A SINGLE PREMISE

Before beginning this installation read the instruction sheet thoroughly. Check that all parts on parts list are present.

URD Mini Pillar Installation Guide. UDS Universal Pillar Installation Guide. Cable to LV Isolators, Crossarm and Cable Detail

TECHNICAL SPECIFICATIONS FOR HARDWARE & ACCESSORIES -ACSR DOG CONDUCTOR FOR TRANSMISSION LINE

Bharat Heavy Electricals Limited (High Pressure Boiler Plant) Tiruchirappalli , TAMIL NADU, INDIA CAPITAL EQUIPMENT / MATERIALS MANAGEMENT

ELECTRIC SERVICE RULES DISTRIBUTED GENERATION Issued Jan 2016

RIGGING HARDWARE SOLUTIONS for WIRE AND ROD SYSTEMS

S.C.C. Syllabus. Note 3 : A candidate qualifying in part 5 need not qualify further in part 12. SYLLABUS FOR SUPERVISORS. Part-1

We msckolkata are one of the leading traders and Suppliers of high quality assortment of Electrical products, Spares and Allied products.

8.0. General Components. Product Catalogue. Version. Section PRODUCT CATALOGUE 8.0

Item L.1 Voltages 1. The consumer voltage must be between +10% and -10% of the nominal national voltage (nnv.)

: Supply of Gas Pipeline Monitoring equipment for the Oil and Gas Corporation of Georgia.

LIST OF EDD DESCRIPTION/ SPECIFICATION AS 19 TH OCTOBER 2016

Urgent Support to the Agriculture and Electricity Sector in the Gaza Strip

Aluminum Conductor Composite Reinforced Installation Guidelines and Maintenance

ezspan ADSS All-dielectric self-supporting loose tube cable


Sub-Transmission & Distribution System

RIG-I-FLEX 140 SERIES CURTAIN TRACKS

We are counted among the prominent manufacturer, supplier and exporter of industrial jacks. Products manufactured by us are demanded for optimum

DRY TYPE TRANSFORMERS

Spare parts list ( ) Spare parts list BR/BD 40/25 C

TEMPORARY ELECTRIC WIRING FOR CARNIVALS, CONVENTIONS, EXHIBITIONS, FAIRS AND SIMILAR USES

Section 6 FIBERLIGN Hardware for ADSS

Dead Tank Outdoor Vacuum Circuit Breaker, Type VOX

Use and Care Instructions: Youngman Telescopic Loft Ladder. Models: 2.6m and 2.9m. Safety

SPECIFICATION FOR HARDWARE FITTINGS SUITABLE FOR TENSION STRING TO BE USED FOR 11KV/22KV LINE

026-2 : 1996 CEB STANDARD

AMENDMENT ELECTRIC SERVICE MANUAL 2014

33KV INDOOR SWITCHGEAR

Moisture-proof cable branch boxes Ceiling distribution boxes Lamp suspension boxes Wall boxes Concrete wall boxes and accessories

Services. Rental Equipment RENTAL DIVISION PRODUCT LINES. LOAD RESTRAINTS Load Binders (Lever & Ratchet) Truck Tie-down Assemblies Boomer Chains

Transcription:

+91-8048763042 S. K. Industrial Corporation https://www.indiamart.com/skindlcorpn/ We are an ISO 9001 : 2008 certified company. We are manufacturing, exporting and supplying HT and LT transmission line, sub station, pole line and distribution line hardware fittings, clamp and connectors.

About Us In 1950, Sri Nemi Chand Jain founded M/s. The Electrical Accessories Co. for manufacturing of Electrical Over head Line Material. In 1989, M/s. S. K. Industrial Corporation (SKIC) was founded by the undersigned having its works & register office at 4, Ahmed Mamoojee Street, Liluah, Howrah-711 204, West Bengal, India and City Office at 32, Ezra Street, 7th Floor, Kolkata, West Bengal, India. In the year 2003, the company was achieved ISO Certification. In the year 2009, the Company's city office had been shifted at 17, Ezra Street, 3rd Floor, Kolkata-700 001, West Bengal, India. The "SKIC" has achieved remarkable success in terms of manufacturing, exporting and supplying the quality materials. Its having a good reputation in power sector for supply of Quality material. Its have own well Plant & Machinery with well equipped testing Laboratory. The SKIC's main motto is to Develop Superior Quality of Compression Type Clamp & Connectors, Aerial Bunch Cable Accessories and Wedge Connectors etc. to minimize Distribution and Transmission Power Losses. Further to my contribution towards the improvement for quality products, sound administration and devoting time in Environmental Growth and Social Activities etc. For more information, please visit https://www.indiamart.com/skindlcorpn/profile.html

AERIAL BUNCH CABLE ACCESSORIES AB Cable Accessories LT Eye Hooks Eye Hook Type A LT Suspension Clamp NFC

POLE LINE HARDWARE AND ACCESSORIES Stay Set G.I. Pin Coil Type Earthing Coil Pipe Type Earthing

SUBSTATION CLAMPS AND CONNECTORS Helical for Hardware Fittings Transmission Line Hardware Fittings Double Tension Hardware Strings Pole line Hardware Fittings

HARDWARE FITTINGS ACCESSORIES HT and LT Stay Sets GI Pins Suspension Hardware Fittings Strain Hardware Fittings

EARTH WIRE ACCESSORIES Earthwire Vibration Damper Earthwire Pad Clamp Earth Wire Tension Clamp Earth Wire Suspension Clamp

CONDUCTOR ACCESSORIES Preformed Armour Rods Conductor Bundle Spacer for Twin Conductors Quad Conductors Double Suspension String Quad Conductors Double Tension Hardware String

Eye Hooks Type A Dead End Clamp Anchoring Clamp NFC Service Dead End Clamp

LT Dead End Clamp Suspension Clamp REC Stainless Steel Strap and Buckle LT AB Cable Dead End Clamp

HT AB Cable Suspension Clamp HT AB Cable Dead End Clamp Pre Insulated Bi Metallic Lugs Earth Spike

LT Shackle Insulator LT Spacer D Iron Clamp Danger Board

Guy Grip H Connectors Discharge Rods Distribution Boxes

Bird Guards Anti Climbing Devices Universal Type Parallel Groove Clamps Conductor Accessories

Pad Clamps Cleat Clamps Sub Station Clamps Transformer Connectors

CT / PT Connectors VCB Connectors BPI Connectors Pole Clamps

Tension Clamp Wedge Connector Universal Distribution Connectors LT PVC Spacers

Aluminium Binding Tape and Wires LT Shackle Hardware Fittings Guy Grips with Ties D Shackles

Midspan Compression Joint Earth Wire Earth Wire Repair Sleeves Flat Earth Wire Cleat Clamp Twisting Jointing Sleeves

Spiral Vibration Damper Mid Span Compression Joints Rigid Spacer Single Tension Hardware Bolted

F a c t s h e e t Year of Establishment : 1989 Nature of Business : Manufacturer Total Number of Employees : 11 to 25 People

CONTACT US S. K. Industrial Corporation Contact Person: Sunil Kumar Jain Crescent Chambers, No. 17 Ezra Street, 3rd Floor Kolkata - 700001, West Bengal, India +91-8048763042 https://www.indiamart.com/skindlcorpn/