Skimmers and remediation pumps All it takes for environmental research
Remediation pumps Skimmers and remediation pumps are meant to remove liquid pollution from groundwater Tapa Estland Villager literally sees water burning. Kerosine from a nearby old military airfield is floating on the groundwater 2
Remediation pumps The liquid can be either LNAPL The polluted groundwater itself and / or An oil-like liquid or solvent floating on the groundwater Also called Light Non-Aqeous Phase Liquid or LNAPL A solvent at the lowest level in a groundwater filled borehole Also called Dense Non-Aqeous Phase Liquid or DNAPL 3
Remediation pumps Groundwater pollution; DNAPL and LNAPL Leakage from an oil drum resulting in pure LNAPL on groundwater Pure DNAPL solvent on impermeabl e layer Polluted soil gas Polluted groundwater 4
Skimmer What is a skimmer A skimmer skims oil from water. There are two methods: With a floating filter With a float 5
Skimmer Float or filter Float or filter can move up and down to follow fluctuations of the water table with range 0,5 m (or 1 m) Float is used for maximum flow but leaves an oil layer of 2.5 cm Filter is used to clean the last oil down to 0.25 mm 6
Skimmer Float or filter Float floats ON water but is submerged in oil. Result: Oil is collected only Oil inlet LNAPL water Oil outlet to pump 7
Skimmer Hydrophobic filter Filter floats in water with hydrophobic sieve section in the oil layer. Only oil is collected Works down to 0.25 mm LNAPL layer Hydrophobic oil inlet Weighted section LNAPL water Oil outlet to pump 8
Skimmer Connections Quick connect coupling allows connection with above ground suction pump or with in-well suction pump Quick connect coupling 9
Skimmer Above ground suction pump possible with liquid levels <3-4 m Pump should be explosion proof and LNAPL resistant To diaphragm pump 10
Skimmer In all other cases mount a suction pump directly on the skimmer 11
Suction-pressure pump 2 suction pressure pump; perfect for skimmers. Main features Automatic incorporated regulator Pneumatic: Safe and explosion proof Does not need to be submerged Inert; can pump all solvents Can operate mounted on a skimmer Can also operate stand alone Factory tested automatic operation Factory pre-set can be customized Fitted with a non-return valve Limited flow For 2 wells 12
Suction-pressure pump Suction-pressure pump stand alone operation LNAPL or DNAPL above groundwater table Pump will produce an oil/water mix Remediation of LNAPL 13
Suction-pressure pump Suction-pressure pump stand alone operation Pump should stay submerged in polluted water, Slow pumping needed if there is an LNAPL Remediation of polluted groundwater only 14
Suction-pressure pump Suction-pressure pump with skimmer Pump will only collect oil; not water Only input: Air pressure Remediation of LNAPL 15
Suction-pressure pump Suction-pressure pump working principle: A pneumatic pressure powered piston pump. Suction is created by the spring Remediation of LNAPL 16
Air power All pumps are air-powered Air should be pre-treated to prevent long term problems 17
Large capacity pressure pump Main features Must be submerged Very high capacity < 55 l/min Float regulated; no piston Automatic incorporated pneumatic operation Inert materials, will pump all solvents For polluted groundwater and DNAPL Considerable air consumption For 4 wells, (3 type optional) Top filling or bottom filling types available 18
Large capacity pressure pump Main pumping applications Landfill leachate Landfill gas condensate Hydrocarbon recovery Total fluids 19
Large capacity pressure pump Working principle Filling cycle: Water enters by check valve, pushes up float that switches air vent to air entrance Empty cycle: Water enters by check valve, pushes up float that switches air vent to air entrance 20
Large capacity pressure pump Top filling or bottom filling 21
Large capacity pressure pump Some field pictures 22
Remediation pumps Also see the manuals 23