ONSITE OFFERS FEB - MAR

ONSITE OFFERS FEB - MAR 201

NEW 1V ROTARY LASERS OUTSTANDING PERFORMANCE & ACCURACY NEW TOUGHSOUND SITE RADIO BEST IN CLASS SOUND TO THE JOBSITE GREEN 1V ROTARY LASER - KIT DCE09D1G-XE RED 1V ROTARY LASER - BARE DCE04NR-XJ Introducing the NEW 1V Rotary Tough Lasers from DEWALT. Designed for use on the toughest of job sites, power comes courtesy of the 1V DEWALT platform and offers a runtime of up to 5 hours. IP rated and drop tested, each laser comes complete with a detector and TSTAK storage box. Red and green beam options are available. FLEXVOLT compatible. The NEW DEWALT TOUGHSOUND radio brings best in class sound to the jobsite. speakers including 2 sub-woofers produce 40w of output power while the IP54 case protects against dust and water. TOUGHSOUND SITE RADIO / CHARGER DWST1-54-XE TOUGHSYSTEM compatible connects with other TOUGHSYSTEM boxes and trolleys Premium sound 4 full range tweeters 1 subwoofer 1 assisted bass resonator Charges 10.v / 14.4v / 1v batteries Bluetooth, USB & AUX inputs Backlit dot matrix screen 12 FM Presets USB Charger speakers DAB Class II, Self levelling rotary laser with plumb (up and down) TRUE Green beam diode 4X more visible than traditional red beam lasers m visible distance 00m with detector Dual plane slope mode /-10% 4 speeds 0/0/250/00 RPM Scan mode Accuracy 1.5mm@30m Compensation range: ± Compatible with DEWALT 1V Batteries Battery life: 1.5Ah = 14 hours / 2Ah = 19 hours / 3Ah = 29 hours / 5Ah = 4 hours IP Rated 2m drop tested DCE09 Rotary Laser, Detector, Remote Control, Laser Target, Glasses, 2.0Ah Battery, Charger, TSTAK Storage Case, Mounting Bracket Class II, Self levelling rotary laser with plumb (up only) 45m visible distance 45m with detector Single plane slope mode /-10% 4 speeds 0/0/250/00 RPM Scan mode Accuracy 3mm@30m Compensation range: ± Compatible with DEWALT 1V Batteries (not included) Battery life: 1.5Ah = 1 hours / 2Ah = 22 hours / 3Ah = 33 hours / 5Ah = 5 hours IP54 Rated 2m drop tested DCE04 Rotary Laser, Detector, Laser Target, Glasses, TSTAK Storage Case, Mounting Bracket SUPPLIED AS BARE UNIT BATTERIES AVAILABLE SEPARATELY TSTAK MOBILE JOBCHEST DWST1-599 TSTAK compatible stacks and connects with all existing TSTAK boxes Telescopic handle leans back to maximize access Heavy duty " wheels 42.55L capacity Up to 50kg carrying capacity POWER TOOL BAG WITH WHEELS DWST1-9210 CARRIER TROLLEY AND TOUGHSYSTEM BOXES AVAILABLE SEPARATELY Heavy-Duty Telescopic Handle Huge capacity to hold multiple power tools, hand tools and accessories Internal drill holster Inner divider for organisation Ergonomic handle & shoulder strap provide comfort while carrying heavy loads 2.0 TSTAK BOXES AVAILABLE SEPARATELY 2 3

XRP TECHNOLOGY PERFORMANCE FOR REAL APPLICATIONS 1V XR LI-ION XRP KITS 1V KITS - ALL NEW XRP HAMMER DRILL XRP COMBI DRILL DCD99P2-XE / DCD99N-XE The power output of the new DEWALT 1V XRP Hammer Drill Driver has been increased to 20 UWO (unit watts out) which means its able to complete a wide range of applications - fast. The increased power output offers faster application speed in all tasks especially under heavy load conditions. Increased speed of application from 34,00BPM (DCD995) to 3,250BPM at 2,250RPM Improved 3 position LED, with a 20 minute torch setting allows for better task visibility Increased air flow to prolong drill life XRP HAMMER DRILL KIT DCD99P2-XE XRP 3 Speed all-metal Transmission No-load speed: 0-450/1,300/2,000rpm (2,250rpm hammer) Beats per min: 0-,00/25,500/3,250bpm Torque: 95 Nm LED Work light 20W Brushless Motor Electronic Clutch Side Handle, TSTAK Kit Box 2 TOOL XRP COMBO KIT DCK2P2-XE BARE TOOL ALSO AVAILABLE DCD99N-XE INCREASED POWER FOR IMPROVED PERFORMANCE AND FASTER APPLICATION SPEED 50 UWO (UNITS WATTS OUT) 20 UWO (UNITS WATTS OUT) 95Nm DCD99 XRP Hammer Drill: E-Clutch, 3 speed, 95Nm, 2,000rpm (2,250rpm hammer) DCF Impact Driver: 205Nm, 3,00ipm, 3 speed / torque settings Supplied with TOUGHSYSTEM Kit Box Side Handle, TOUGHSYSTEM Kit Box 300 UWO (UNITS WATTS OUT) DCD 350 UWO (UNITS WATTS OUT) 42Nm DCD5 0Nm 0Nm DCD99 DCD95 APPLICATION PERFORMANCE TOOL XRP COMBO KIT DCK9P2B-XE INCLUDES DCD99 XRP 3spd Hammer Drill DCS30 Reciprocating Saw DCS391 Circular Saw DCG412 125mm Angle Grinder DCR00 Bluetooth Worksite Speaker Tool Connect for security and inventory management 2 x 5.0Ah XR Li-Ion Bluetooth Batteries, 2x TOUGHSYSTEM Kit Box 4 5

REDEMPTION OFFERS 1V XR LI-ION -TOOL COMBO KIT 1V XR LI-ION 5-TOOL COMBINATION KIT - 5.0AH DCK93P2-XE DCZ594P2-XE DCD95 XRP 3spd Hammer Drill DCF5 Impact Driver DCS30 Reciprocating Saw DCS391 Circular Saw DCG412 125mm Angle grinder DCL040 LED Pivot Light DCD9 Brushless Hammer Drill DCS3 Reciprocating Saw DCG412 125mm Angle Grinder DCL040 LED Pivot Light 2x TOUGHSYSTEM Kit Box 1V XR LI-ION 4-TOOL 5.0AH COMBO KIT - INCLUDES BRUSHLESS 1V XR LI-ION 3-TOOL COMBO KIT - INCLUDES BRUSHLESS DCK451P2-XE DCZ391P2-XE DCD9 Brushless Hammer Drill DCS30 Reciprocating Saw DCS391 15mm Circular Saw DS150 TOUGHSYSTEM DS400 TOUGHSYSTEM DCD9 Brushless Hammer Drill DCF Brushless 3spd Impact Driver DCG412 125mm Angle Grinder TOUGHSYSTEM Storage 1V XR LI-ION 125MM GRINDER - BARE TOOL DCG412N-XE INCLUDES 1V XR LI-ION BRUSHLESS RAPID CYCLE 2 SPEED FRAMING NAILER - KIT DCN1P2-XE DCN95P2-XE Nail Length: 32-3mm, Magazine Angle: 20 Compact, lightweight & ergonomic design Gas-free operation - reduced running cost Reduced running costs & servicing requirements Brushless Motor means longer runtime RapidCycle sequential firing mechanism Thumb wheel depth adjuster Nail Length: 50-90mm Magazine Angle: 30-34 RapidCycle sequential firing mechanism Gas-free Operation 2 Speed operation for increased run time Up to 00 Nails per Charge Less Down-time, Lower Running Costs Heavy Duty Heavy Duty Kit Box 1V XR LI-ION 5.0AH BRUSHLESS 2-TOOL COMBO KIT DCK393P2-XE DCK2P2-XE DCD9 Brushless Hammer Drill DCF0 1/2" Impact Wrench DCG412 125mm Angle Grinder DCD9 Brushless Hammer Drill TOUGHSYSTEM Kit Box TOUGHSYSTEM Kit Box 1V XR LI-ION BRUSHLESS COLLATED DRYWALL SCREWDRIVER - 5.0AH KIT 330MM THREE KNIFE, TWO SPEED PORTABLE THICKNESSER DCF20P2K-XE DW35-XE 4,400rpm Brushless Motor Up to,000 screws per charge Tool-free depth control Rotating detachable screw magazine Auto & manual operation Set & Forget manual feed nose piece Screw length 25-5mm, Collated Magazine, Nose Piece, PR2 Driver Bit 1V XR LED SPOTLIGHT DCL043-XE 1V XR LI-ION 3-TOOL 5.0AH COMBO KIT - INCLUDES BRUSHLESS 1V XR LI-ION BRUSHLESS RAPID CYCLE 1 GAUGE FINISH NAILER KIT INCLUDES REDEMPTION OFFERS 1V XR BRUSHLESS HDD BARE UNIT DCD9N-XE 100W Motor Three knife cutter head 10,000 RPM Two speed operation Capacity: 330mm x 152mm (3mm max cut depth) Feed rate: 4m - m / min Fan assisted chip ejection system Includes: Dust Hose Adapter, Dust Ejection Chute SANDER PALM GRIP QTR SHEET DWE411-XE

CORDLESS OFFERS WOODWORKING 10.V XR LI-ION TWIN PACK 1V XR LI-ION BRUSHLESS HAMMER DRILL 5.0AH KIT 125MM RANDOM ORBIT SANDER ¼ SHEET ORBITAL PALM GRIP SANDER DCK211D2T-XE DCD9P2-XE DWE423-XE DWE411-XE DCD10 Drill Driver DCF15 Impact Driver TSTAK Clear Kit Box Heavy Duty all-metal transmission No-load speed: 0-550 / 2,000rpm Beats per min: 0-34,000bpm Torque: 0 Nm Max capacity (wood) 40mm 13mm all-metal keyless chuck Ultra bright 0 Lumen work light Heavy Duty Kit Box 2 x 2.0Ah 10.V XR Li-Ion Batteries, 10.V COMPACT LED FLASHLIGHT DCL510N-XJ Includes: Dust Bag, Extractor Ports 1V XR 2AH DCB13-XE Includes: Dust Bag, Extractor Ports 1V XR LI-ION BRUSHLESS 3 SPD IMPACT DRIVER 5.0AH KIT 1V XR LI-ION 4-TOOL 5.0AH COMBO KIT - INCLUDES BRUSHLESS 01 WATT - TOP HANDLE JIGSAW 1100 WATT - RECIPROCATING SAW DCFP2-XE DCK399P2-XE DW331K-XE DWE305PK-XE No-load speed: 0-3,250rpm Impacts per min: 0-3,00ipm Torque: 205 Nm 3 speed / torque settings.35mm drop-in hex bit holder 3x LED Halo light ring 2 x 5.0Ah XR Li-Ion Batteries, Heavy Duty Kit Box DCD9 Brushless Hammer Drill DCF99 Brushless High Torque 1/2" Impact Wrench DCG412 125mm Angle Grinder 1100 Watt motor 4 position blade clamp for flush cutting and added versatility Lever-action blade change for ease of use Stroke rate: 0-2,00 spm Stroke length: 29mm 1V XR 2AH DCB13-XE Keyless blade change system Stroke Rate: 0-3,100spm Stroke Length: 2mm Tool - free adjustable bevel Pendulum Action: 4 stage Includes: Anti-Scratch Cover, Splinter Insert, Dust Adapter, Heavy Duty Kit Box 2 x 5.0Ah XR Li-Ion Batteries, Includes: Heavy Duty Kit Box 1V XR BRUSHLESS OSCILLATING MULTI-TOOL - 4.0 AH KIT 150MM & 10MM VARIABLE SPEED POLISHER 300W OSCILLATING MULTI-TOOL DCS355M2-XE DWP49X-XE DWE315KT-XE Versatile multi-tool suitable for variety of applications Quick change accessory system Universal adaptor Fits most oscillating accessory brands Dual grip variable speed trigger Oscillations per minute: 0-20,000 1V XR LI-ION HAMMER * DRILL BARE TOOL DCD5N-XE REDEMPTION 1250 Watt Motor Variable speed 0-00 / 3500rpm Variable speed dial Max Disc dia. 150 & 10 & 230mm Replaceable wool ingestion shields 4.0 100MM 00W TOGGLE SWITCH GRINDER 1V XR LI-ION 1/2" HIGH TORQUE BRUSHLESS IMPACT WRENCH - KIT 1V XR LI-ION 1/2" HIGH TORQUE BRUSHLESS IMPACT WRENCH - FRICTION RING 1300W PLUNGE SAW DCF99P2-XE DCF99HP2-XE DWS520KT-XE No-load speed: 0-400 / 1200 /1900 rpm Impacts per min: 0-2,400ipm Torque: 950 Nm (125Nm breakaway) 1/2" (12.mm) Socket Drive 3 speed / torque settings Aluminium front housing for durability 2 x 5.0Ah XR Li-Ion Batteries, Heavy Duty No-load speed: 0-400/1200/1900 rpm Impacts per min: 0-2,400ipm Torque: 950 Nm (125Nm breakaway) 1/2" (12.mm) socket drive 3 speed / torque settings Aluminium front housing 2 x 5.0Ah XR Li-Ion Batteries, Heavy Duty 1300W motor for performance & durability Variable speed: 150-4000rpm Anti kickback function 55mm depth of cut 0-4 bevel capacity 9 PC IMPACT SOCKET SET DT50-QZ 9 PC IMPACT SOCKET SET DT50-QZ Quick change accessory system Universal adaptor Dual grip variable speed trigger Oscillations per minute: 0-20,000 Sanding Platen included 3Pc Accessory Set, Universal Accessory Adaptor, Sanding Platen, Includes: 10mm Velcro Packing Pad, 10mm Velcro Wool Bonnet, Bail Side Handle, Horizontal Side Handle 2 x 4.0Ah XR Li-Ion Batteries, 35Pc Accessory Set, Universal Accessory Adaptor, 230 Watt Motor 14,000 orbits per minute Low vibration design (4m/s²) Pad size: 10 x 115mm Hook & Loop or clamp style abrasive attachment AirLock compatible extractor port 20 Watt Motor,000-12,000 orbits per minute Low-vibration design (2.5m/s²) Pad size: 125mm, Orbit size: 2.mm Hook & Loop abrasive attachment AirLock compatible extractor port Tooth Blade, Airlock Adaptor, 1x 1.5m Double Sided Rail, PAIR OF QUICK CLAMPS DWS502-XJ 9

USB CHARGING ADAPTER * WITH ANY BARE TOOL LISTED OPPOSITE XR LI-ION BARE TOOLS DCD95N-XE DCD9N-XE DCD40N-XE DCS30N-XE (Blade not included) DCS391N-XE DCS33N-XE DCG412N-XE DCFN-XE IMPACT DRIVER KIT HAMMER DRILL KIT DCN1N-XE DCF20KN-XE DCS355N-XE DCN95N-XE DCFP2-XE DCD9P2-XE 205Nm max torque 3 speed functionality Optimised control 2 X 5.0AhXR Li-Ion Batteries Intelligent Charger TSTAK Kit Box Extreme Power: 40 UWO 0Nm max torque 0 Lumen adjustable work light 2 X 5.0Ah XR Li-Ion Batteries Intelligent Charger TSTAK Kit Box DCF99N-XE DCF99HN-XE DCF0N-XE DCS331N-XE REDEMPTION OFFER SEE PAGE REDEMPTION OFFER SEE PAGE DCD95N-XE DCD9N-XE DCD40N-XE DCS30N-XE DCS391N-XE DCS33N-XE DCG412N-XE DCFN-XE DCN1N-XE DCF20KN-XE DCS355N-XE DCN95N-XE DCF99N-XE DCF99HN-XE DCF0N-XE DCS331N-XE DESCRIPTION 1V XR LI-ION XRP HAMMER DRILL - BARE TOOL 1V XR LI-ION BRUSHLESS HAMMER DRILL - BARE TOOL 1V XR LI-ION 10MM RIGHT ANGLE DRILL - BARE TOOL 1V XR LI-ION RECIPROCATING SAW - BARE TOOL 1V XR LI-ION CIRCULAR SAW - BARE TOOL 1V XR LI-ION METAL CIR SAW- BARE TOOL 1V XR LI-ION 125MM GRINDER - BARE TOOL 1V XR LI-ION BRUSHLESS 3 SPD IMPACT DRIVER - BARE TOOL 1V XR LI-ION BRUSHLESS 1 GAUGE FINISH NAILER - BARE TOOL 1V XR LI-ION BRUSHLESS COLLATED DRYWALL SCREWDRIVER - BARE TOOL 1V XR BRUSHLESS OSCILLATING MULTI-TOOL - BARE TOOL 1V XR LI-ION BRUSHLESS 2 SPEED FRAMING NAILER - BARE TOOL 1V XR LI-ION 1/2" HIGH TORQUE BRUSHLESS IMPACT WRENCH - BARE TOOL 1V XR LI-ION 1/2" FRICTION RING HIGH TORQUE BRUSHLESS IMPACT WRENCH - BARE TOOL 1V XR LI-ION 1/2" IMPACT WRENCH - BARE TOOL 1V XR LI-ION JIGSAW - BARE TOOL * USB CHARGING ADAPTER ONLY AVAILABLE AT PARTICIPATING RETAILERS, WHILE STOCKS LAST. BARE TOOLS SUPPLIED WITHOUT BATTERIES & CHARGER. 10 11

DRILLING SDS-MAX BREAKERS AND COMBI HAMMERS 30 KG 2 MM HEX PAVEMENT BREAKER 2 SPEED DEWALT PERCUSSION DRILL 2MM 00W SDS-PLUS ROTARY HAMMER D2590-XE DWD530KS-XE D25133K-XE Powerful 1300w motor 2 speed 0-1250/0-3500 rpm 0-5000 bpm Maximum drilling wood 40mm Maximum drilling steel 1mm Electro-mechanical clutch 2 speed gearbox Includes: Multi-Position Side Handle, Depth Stop, Heavy Duty Carrying Case Extreme durability with optimum breaking performance 2100W motor, 900 bpm (blows/min) 52J impact energy 2mm Hex Tool Holder Active Vibration Control Suspended handle mechanism Vibration: 4.m/s2 Includes: D2590-XE 30Kg Breaker 4-2mm diameter drilling Rotation-stop Impact energy: 2. J Impact-stop for drilling in wood, steel & plastic Mechanical clutch Electronic variable speed control Includes: Multi Position Side Handle, Depth Stop, 10KG SDS-MAX DEMOLITION HAMMER D25902K-XE Outstanding concrete breaking performance 1500W motor, 2100 bpm (blows/min) 19J impact energy SDS-Max Tool Holder Active Vibration Control Floating handle design Vibration:.5m/s2 Includes: Chisel, side handle, carry case KG 4MM SDS-MAX COMBINATION HAMMER 2MM 900W SDS-PLUS ROTARY HAMMER 2MM 900W SDS-PLUS D-HANDLE ROTARY HAMMER D25144K-XE D2523K-XE 4-2mm diameter drilling Quick Change Removable Chuck Impact energy: 3.0J Rotation-stop Mechanical clutch Electronic variable speed control Includes: Multi Position Side Handle with Light, Quick Change Chuck, 4-2mm diameter drilling Rotation-stop Impact energy: 3.0J Active Vibration Control Mechanical clutch Electronic variable speed control Includes: Multi Position Side Handle with Light, Quick Change Chuck, D2522K-XE Ideal for fixing holes 12 to 4 mm 1400W motor, 2520 bpm (blows/min) 11J impact energy SDS-Max Tool Holder Rotation-stop for demolition Floating handle design Active Vibration Control - Vibration:.9m/s2 Includes: Side handle, carry case D2501K-XE Ideal for fixing holes 12 to 45 mm 1250W motor, 240 bpm (blows/min) J impact energy SDS-Max Tool Holder Rotation-stop for demolition Floating handle design Active Vibration Control - Vibration:.m/s2 Includes: Side Handle, Carry Case 100MM 00W TOGGLE SWITCH SAG WITH THE PRODUCTS SHOWN ABOVE 12 DCK39P2-XE DCD9 Brushless Hammer Drill DCH24-XE Brushless Rotary Hammer KG 45MM SDS-MAX COMBINATION HAMMER 1V XR LI-ION 3-TOOL 5.0AH COMBO KIT - INCLUDES BRUSHLESS 1V XR LI-ION SDS-PLUS ROTARY HAMMER - KIT 1V XR LI-ION BRUSHLESS SDS-PLUS ROTARY HAMMER - KIT DCH254M2-XE DCH24P2T-XE Fixing holes up to 24mm in masonry Arm Vibration. m/s² Impact Energy: 2.1J Beats per min: 0-4,500bpm No Load Speed: 0-1,200rpm 3 Mode: Chisel, Hammer & Rotary 2 x 4.0Ah XR Li-Ion Batteries, Quick Change Chuck, Kit Box 3 mode cordless Rotary Hammer Up to 24mm capacity in concrete Hand/Arm vibration. m/s² Impact Energy: 2.1J Beats per min: 0-4,00bpm No Load Speed: 0-1,100rpm 2 x 5.0Ah XR Li-Ion Batteries, Quick Change Chuck, 1V XR LI-ION HAMMER DRILL BARE TOOL DCD5N-XE 4.0 1V XR LI-ION HAMMER DRILL BARE TOOL DCD5N-XE 13

MACHINERY METAL WORKING 305MM 15W COMPOUND SLIDE MITRE SAW WITH XPS 2200W 355MM HIGH PERFORMANCE METAL CHOP SAW 355MM ABRASIVE CHOP SAW DWS0-XE D215-XE D210-XE Quick release clamp for fast work piece clamping High power abrasion protected motor delivers high overload capabilities Spindle lock for quick & easy wheel change Adjustable spark guard allows user to control the direction of sparks XPS Shadow Cut Line System Big capacity: H 110mm x W 305mm or W 345mm x H mm Positive stop bevel & mitre functions Compact profile for ease of portability < 25Kg total weight Includes: High quality 0 Tooth Blade, Blade Spanner, Dust Bag, Material Clamp 305MM 0 TOOTH PRECISION SAW BLADE DT113-QZ Keyless blade clamp Electronic soft start Horizontal side handle No-load speed: 4,0000 rpm Spindle lock for quick wheel change Keyless mitre adjustment Capacity: 120mm x 120mm Keyless material clamp Abrasion protected 2200W motor 100MM 00W TOGGLE SWITCH GRINDER 254MM 2000W PORTABLE TABLE SAW 254MM PORTABLE 150W TABLE SAW 2200W 355MM TCT METAL CHOP SAW DWE491-XE DW45-XE DW2-XE Max ripping capacity 25mm Steel roll cage Rack and pinion fence system 0-4 bevel capacity Cast table top ensures accuracy Overload protection system Includes: 24 Tooth Saw Blade, Mitre Fence, Parallel 2 x Blade Spanners, Push Stick Max ripping capacity 10mm Steel roll cage Rack and pinion fence system 0-4 bevel capacity Cast table top ensures accuracy Overload protection system 100MM 00W TOGGLE SWITCH GRINDER Accurate burr-free cuts Electronic soft start Cool-running 0 tooth 355mm blade Tungsten carbide tipped tooth design Parallel and mitre cuts up to 45 Max Cut at 90 (Square profile) 100x100mm Includes: 24 tooth saw blade, mitre fence, parallel 2 x blade spanners, push stick 254MM 0 TOOTH PRECISION SAW BLADE DT1040-QZ L-CLASS 30L DUST EXTRACTOR 254MM 0 TOOTH PRECISION SAW BLADE DT1040-QZ M-CLASS 3L DUST EXTRACTOR 100MM 00W TOGGLE SWITCH GRINDER 1500W 125MM REAR HANDLE ANGLE GRINDER 1400W 125MM SLIDE SWITCH ANGLE GRINDER DWE42-XE DWE4235-XE No load speed: 10,500rpm Max disc diameter: 125mm Spindle thread: M14 Debris ejection system Overload protection Includes: Keyless Guard, Anti Vibration Side Handle, Inner & Outer Disc Flanges, Spanner A 10MM ROTARY DRILL WITH KEYLESS CHUCK DWD014S-XE No load speed: 11,500rpm Max disc diameter: 125mm Spindle thread: M14 Power loss reset Debris ejection system Includes: Keyless Guard, Anti Vibration Side Handle, Inner & Outer Disc Flanges, Spanner A 10MM ROTARY DRILL WITH KEYLESS CHUCK DWD014S-XE DWV900L-XE DWV902M-XE 1400W 125MM ELECTRONIC PADDLE SWITCH ANGLE GRINDER 1500W 125MM VARIABLE SPEED ANGLE GRINDER L-Class classification Power rating 1,400W Air flow: 4,00 L/min Capacity 30L Wet & dry pick up capability 1000W power take off Power rating 1,400W Air flow: 4,00 L/min Wet & dry pick up capability Power take off facility Telescopic handle Heavy duty wheels Auto start-stop Dual filter auto clean system DWE423-XE DWE425-XE Includes: 2m x 32mm Hose, 35mm Air Lock Adapter, Dust Bag CLEANING KIT DWV9350-XJ Includes: 4.m x 32mm Hose, 35mm Air Lock & stepped Rubber Adapters, Dust Bag CLEANING KIT DWV9350-XJ No load speed: 10,000rpm Max disc diameter: 125mm Spindle thread: M14 Overload protection No lock paddle switch Includes: Keyless Guard, Anti Vibration Side Handle, Inner & Outer Disc Flanges, Spanner 450W MM SLIDE SWITCH DIE GRINDER DWE44-XE No load speed: 2,00-10,500rpm Max disc diameter: 125m Spindle thread: M14 Electro-mechanical clutch Overload protection Includes: Keyless Guard, Anti Vibration Side Handle, Inner & Outer Disc Flanges, Spanner 450W MM SLIDE SWITCH DIE GRINDER DWE44-XE 14 15

COMING SOON FEB 201 FIND OUT MORE: www.dewaltdrivefive.com Please tick if you wish to receive information on new DEWALT products, promotions and prize giveaways. REDEMPTION FORM Please tick one redemption offer per item purchased on the table below and fill in your details to receive your redemption. PROOF OF PURCHASE REQUIRED. Name: Address: Email: Phone: Store Name: Invoice No. (Please attach a copy of your receipt): PAGE ü PAGE ü PAGE ü PAGE DCK93P2-XE DCF20P2K-XE DCD9N-XE 12 D2590-XE 15 D210-XE DCZ594P2-XE DW35-XE DWE411-XE 12 D25902K-XE 15 DW2-XE DCK451P2-XE DCG412N-XE DCK211D2T-XE DCL510N-XJ 12 D2522K-XE 15 DWE42-XE DWD014S-XE DCZ391P2-XE DCL043-XE DCD9P2-XE DCB13-XE 12 D2501K-XE 15 DWE4235-XE DWD014S-XE DCK393P2-XE DCFP2-XE DCB13-XE 13 DCK39P2-XE 15 DWE423-XE DWE44-XE DCK2P2-XE DCK399P2-XE 13 DCH254M2-XE DCD5N-XE 15 DWE425-XE DWE44-XE DCN1P2-XE DCS355M2-XE DCD5N-XE 13 DCH24P2T-XE DCD5N-XE DCN95P2-XE 9 DWP49X-XE 15 D215-XE ü Either scan and e-mail to: NZredemptions@DEWALT.com or go online at: www.guaranteedtough.co.nz Alternatively, return by post to: DEWALT NZ Bonus Offer, PO Box 12135, Penrose 142 TERMS & CONDITIONS Please fill in this form and post to DEWALT NZ Bonus Offer, PO Box 12135, Penrose 142. This redemption offer is valid only to those consumers who purchase one of the selected DEWALT NZ products between 1st February to 31st March 201. Proof of purchase is essential to validate claim. Please send a COPY of your purchase receipt with this claim form. Please provide physical address, no PO. Boxes. Receipt must clearly show model of tool purchased, date of purchase, place of purchase and the price paid to substantiate the claim. DEWALT NZ reserves the right to request further information regarding proof of purchase from the redeemer if circumstances warrant. Keep your original receipt for warranty purposes, as proof of purchase. Goods must be fully paid for at the time of purchase and on ONE receipt to be eligible. DEWALT NZ accepts no liability for claims that may be delayed, misdirected or lost in the mail causing them to not be received by the closing date. Redemption offer will be dispatched within 40 working days of receipt of the claim while stocks last. This redemption offer is not valid to employees of DEWALT NZ. All Redemption Offer claims must be received by 13th April 201. This promotion cannot be used in conjunction with any other offer, limited stock available. Offer available while stocks last. An alternative bonus may be provided at the discretion of DEWALT NZ. Offer only valid when product purchased through authorised resellers of DEWALT NZ 39 Business Parade North, East Tamaki Heights, Auckland. Telephone: 000 42 539 Fax: 000 22 539 www.dewalt.com The yellow and black colour scheme is used on DEWALT Power Tools and Accessories as a trademark. DEWALT reserves the right to change any deal at any time without notice. Deals available while stocks last.