SKID STEER LOADER SR130 THE STRENGTH TO PERFORM www.casece.com EXPERTS FOR THE REAL WORLD SINCE 1842
MAIN REASONS TO CHOOSE THE SKID STEER LOADER COMFORTABLE AND SAFE CAB - Operator friendly - Comfortable Flat floor - Wide Cab RADIAL BOOM - Radial geometry for Higher Boom breakout force & lifting Capacity, highly suitable for digging & Pushing HIGH ROC Perfect combination of Wheelbase & weight distribution, hence high Rated Operating Capacity HIGH VERSATILITY Wide range of attachments. Different auxiliary hydraulic solutions to feed them. 2
HIGH VISIBILITY Unique side lightening. Large side windows for an excellent visibility. Better sight lines to the tires, bucket edge, curb lines and even to the rear when backing up. EASY ACCESS Wider cab entrance. Lower thershold. Longer and ergonomic handles. OUTSTANDING STABILITY Longer wheelbase. Optimized weight distribution. TOP RANKING BREAKOUT FORCE Aggressive cylinder mounting for superior digging efficiency. 3
FEATURES RADIAL BOOM Extended line up to meet any customer need To deliver CASE specific performance and productivity to an ever wider range of customers, CASE Construction Equipment has developed the skid steer loader SR130 with the radial boom. COMFORTABLE AND SAFE CAB Leading operator comfort The wide door, repositioned grab handles and a lower threshold provide easy access to the cab. The SR130 skid steer loader benefits from a cab with up to 25% more internal width, providing greatly improved operator comfort. Our cab - the widest in the industry - provides plenty of room for comfortable operation, with greater headroom and legroom, more space between the control levers and easy access to the seat. HIGH VISIBILITY Wider glazed surface for safer operations The large glazed surface with ultra-narrow wire side screens, the lowered threshold and thinner front pillars provide the best visibility in the market. OUTSTANDING STABILITY with Case power stance chassis Our power stance chassis rides on a 21 percent longer wheelbase, delivering greater stability and comfort and allowing increased lifting capabilities, regardless of jobsite conditions. TOP RANKING BREAKOUT FORCE Case cylinder and chassis design provides maximised pushing power The cylinder geometry optimises the skid steer and compact track loader s push and pull power, while the bucket support baring directly on the chassis of the machine further adds to its pushing power. HIGH VERSATILITY Hydraulics simplified. Versatility maximised Connect Under Pressure (CUP) system to plug hydraulic hoses with no wrenches. Three different Auxiliary Hydraulics Packages offered: 4
APPLICATIONS AGRICULTURE Farming Lift more feed. Move more bales. Keep the livestock happy. With our increased vertical reach and best-in-class torque, CASE skids steers make even the heaviest chores easier to manage and complete. URBAN Residential Got a tight space to navigate? Our superior EH Controls make maneuvering those tight spaces a breeze. Plus, left, right, forward or even behind, our best-in-class visibility gives operators all-around better lines of sight making the job more productive and safer. LANDSCAPING Landscaping With our industry leading breakout force, torque and hydraulics, CASE gives both commercial and residential landscapers the capability to handle multiple jobs such as landscape design, irrigation, soil preparation, along with digging and transporting heavy materials such as rocks, dirt and sand with ease. 5
SKID STEER LOADERS ENGINE Model ISM N844 L-D Row diesel Type 4 stroke, naturally aspirated Cylinder 4 Bore - Stroke 84x100 mm Displacement 2.2 L Fuel injection Indirect Fuel High Speed diesel (HSD) Air intake Naturally aspirated W/O EGR Cooling Liquid Engine speeds High idle - no load (rpm) 3140 +/- 50 Rated -full load (rpm) 2900 Low idle (rpm) 1080+/-50 Horsepower per SAE J1349 Gross 48.8 hp (36.4 kw) @ 2800 rpm Net 45.8 hp (34.1 kw) @ 2800 rpm Peak torque 130.5 Nm@ 1750 rpm ENGINE COOLING Radiator Core type All Aluminum Core size area 0.226 m 2 Rows of tubes 43 Cap pressure 16 +/-2 psi Fan Diameter 450 mm Ratio 0.89:1 Water pump Style Centrifugal Flow 50.1 l/min Engine lubrication Pump Pressure feed with Trychoid pump Pump operating angle ratings Side to Side 35 Bucket Up 35 Bucket down 35 Oil filtration Replaceable, full-flow cartridge POWERTRAIN Drive pump - Mechanical Individual pumps for LH and RH Displacement 35cc Flow at rated engine rpm @ 100% efficiency 102 l/min Flow Bi-directional Charge pressure 25 bar System relief 345 bar ControI Direct Mechanical Drive motors Fixed displacement radial piston Max. displacement 325 cc torque at max. displacements and relief pressure 1784 N-m Travel speed 11.9 Km/h Drive chain Size ASA#80 Tensile strength 93.4 KN AXLES One-piece, forged induction-hardened, high-carbon steel Torque @ Max displacement and relief pressure 5940 Nm Diameter 50.8 mm Length 346 mm Parking Brake Spring-applied, hydraulic release disc Engagement Depress on/off brake button on handle or instrument panel, raise seat bar, get off seat or stop engine STANDARD TYRE Size Tread width Width over inch inch (mm) tyres inch (mm) Heavy duty 10x16.5 49 (1248) 59 (1517) *Tyre weight does not include wheel weight HYDRAULIC SYSTEM Standard equipment pump Type Gear Displacement 23.8 cc Pump flow @ rated engine rpm @ 100% efficiency 59 l/min Leader control valve 3 Spool I Open Center I Series Relief pressure 210 Bar Hydraulic lines Tubing 37 JIC Flare Loop hoses SAE 100 R13 Hydraulic oil cooler Number of tubes 9 Area 843.2 cm 2 Hydraulic filter 6 micron I Spin on type SERVICE CAPACITIES Fuel tank 60.5 l Engine oil with filter 7.5 l Hydraulic system - reservoir 15.13 l Chain tanks (per side) 6.3 l INSTRUMENTATION lndicators Digital Hourmeter Fuel tank LCD bar graph with alarm Warning lights with alarms Engine coolant temperature Engine oil pressure Engine Malfunction Hydraulic charge pressure Hydraulic filter restriction Hydraulic oil filter Hydraulic oil temperature Warning alarms Battery voltage (plus display) lndicator light Engine preheat Parking brake Seat bar reminder ELECTRICAL SYSTEM Alternator 120 amp Starter 2.2 kw Battery 12 volt low-maintenance 925 CCC @ 0 F (-18 C) WEIGHT Operating weight 2300 kg Shipping weight 2160 kg 6
SPECIFICATIONS STANDARD EQUIPMENT ROPS/FOPS level 1 canopy with side screens Control lockout system Tilt ROPS/FOPS Rear window with emergency escape Instrument panels 2 in (51 mm) retractable seat belt Hand throttle Foot throttle Alarm package Headliner Top window Cup holder Power plug socket Foot rest Storage tray Low effort ergonomic hand controls Padded seat bars with integral armrests Loader control lockout system Electric parking brake control Floor cleanout panel LOADER Radial loader arm design Mechanical attachment coupler Loader lift arm support strut ENGINE ISM N844 Integral engine oil cooler Fuel filter with water trap Dual element air cleaner 120 amp alternator 925 CCC - 12 volt battery Glow plug Over & under radiator and oil cooler Spark arresting muffler POWERTRAIN Hydrostatic four wheel drive ASA #80HS drive chain SAHR disc parking brakes HYDRAULICS Hydraulic circuit pedal lock Loader arm-mounted ISO flat face connectors Auxiliary function lockout override Loader function lockout system Loader lift lockout override 3 spool loader control valve Heavy-duty oil cooler Loader arm float position ATTACHMENTS Available as optional based on machine applications DIMENSIONS A Overall operating height with foundry/excavating bucket short lip with low profile/standard lip bucket with low profile extended/long lip bucket 3.60 m 3.73 m 3.86 m B Bucket hinge pin 2.84 m C Top of ROPS 1.92 m D Bottom of level bucket, fully raised 2.68 m E without attachment with coupler 2.44 m F with foundry excavation bucket on ground with low profile bucket with low profile extended bucket 3.03 m 3.18 m 3.30 m G Dump angle 40.2 H Dump height with foundry/excavating bucket short lip with low profile/standard lip bucket 2.25 m 2.15 m J Dump reach (max. height) 0.47 m K Bucket on ground 26.1 L Bucket at full height 95.2 M Wheelbase 0.94 m P Ground clearance (bottom of jelly pan) 0.18 m Q Angle of departure 22 R without bucket 1.24 m S with 60-in (1.52 m) foundry bucket in carry position with 60-in (1.52 m) inch low profi le bucket on ground with 60-in (1.52 m) inch extended low profile on ground 1.92 m 1.99 m 2.11 m T Clearance circle rear 1.43 m U Rear axle to bumper 0.86 m V Tread width with spec tyres 1.25 m W Over the tyre width with spec tyres 1.52 m PERFORMANCE SPECS Rated operating load Tipping load Cycle times - (seconds) Raise Lower Dump Roll back STANDARD BUCKET 590 kg 1179 kg 3.4 2.1 1.9 1.3 Type Width (m) Weight (kg) Heaped Capacity (m3) Dirt & Foundry 1.5 122 0.33 7
www.casece.com EXPERTS FOR THE REAL WORLD SINCE 1842 PARTS AND SERVICE Wide network of customer support across the world. No matter where you work, we re here to support and protect your investment and exceed your expectations. You can count on Case and your Case dealer for full-service solutions-productive equipment, expert advice, flexible financing, genuine Case parts and fast service. We re here to provide you with the ultimate ownership experience. To locate a Case dealer or learn more about Case equipment or customer service, go to www.casece.com CASE NEW HOLLAND CONSTRUCTION EQUIPMENT (INDIA) PRIVATE LIMITED B1-207, 2nd Floor, Boomerang, Chandivali Farm Road Near Chandivali Studio, Andheri (East) Mumbai 400072, Maharashtra, India Email:caseindia@cnhind.com NOTE: CASE provides specific outfits for various countries and many optional fittings (OPT). The illustrations on this or other leaflets may relate to standard or optional fittings. Please consult your CASE dealer for any information in this regard and any possible updating on components. CNH Industrial reserves the right to modify machine specifications without incurring any obligation relating to such changes creative-farm.it 03/2018