Vertrieb durch: KREIENBAUM Wissenschaftliche Meßsysteme e.k. Heinrich-von-Stephan-Str. 9 40764 Langenfeld Tel: +49 2173 39927-0 Fax: +49 2173 39927-23 E-Mail: info@wissmess.de Web: www.wissmess.de Company 692-1,Geumjeong-dong, Gunpo-si, Gyeongido, 435-862, KOREA (28-9, Heungandaero 27 Beongil, Gunpo-si, Gyeongido, 435-862, Korea) Post-Office : P.O.BOX 100, Yang-Chun,Seoul, 158-600, KOREA Tel : +82-31-429-7471~2 Fax : +82-31-429-7470 Homepage : www.finepcr.com E-mail : finepcr@finepcr.com 00120101
www.finepcr.com LABORATORY EQUIPMENT
ROTATOR CONICAL TUBE MIXER FINEVORTEX cool BLOCK hybridization INCUBATOR shaking INCUBATOR
CONICAL TUBE MIXER DUAL MOTION SHAKER FINEVORTEX MICROMIXER THERMO MICRO MIXER HYBRIDIZATION INCUBATOR SHAKING INCUBATOR THERMO BATH COOL BLOCK compact ROCKER Twist SHAKER(3D Motion) MULTI SHAKER(2D & 3D Motion) orbital /reciprocating SHAKER Rotator Gel Elutor MAGNETIC STIRRER Heat Sealer CONICAL TUBE MIXER 1. confido-s50 : 60~500rpm 99Hour 59Min- 2. confido-s50h : 60~500rpm Ambient +5 C ~ 65 C 99Hour 59Min- DUAL MOTION SHAKER 3. 2D-300 : Variable speed 45 ~ 400rpm 99Hour 59Min- 4. 2D-400 : Variable speed 45 ~ 400rpm 99Hour 59Min- FINEVORTEX 5. FINEVORTEX : ful and stable motion variable 0 ~ 3000rpm MICROMIXER 6. MX2 : 2micro plates vibration & Small mixing combination 7. MX4 : 4micro plates 300 ~1400rpm 180Min- 8. confido-s20 : 2micro plates Digital display of RPM 99Hour 59Min- 9. confido-s202 : 4micro plates Digital display of RPM 99Hour 59Min- THERMO MICROMIXER 10. confido-s20h : 2micro plates Ambient +5 C ~ 65 C 99Hour 59Min- 11. confido-s202h : 4micro plates Ambient +5 C ~ 65 C 99Hour 59Min- COMPACT INCUBATOR 12. AR6 : Compact incubator Ambient +5 C ~ 65 C HYBRIDIZATION INCUBATOR 13. combi-h12 : FINEPCR standard size 14. combi-d24 : Dual chamber 15. combi-v12 : Space-saving vertical type incubator 16. combi-sv12 : Shaking incubator 17. combi-sv120 : High capacity for shaking & rotating SHAKING INCUBATOR 18. BAE07-C300 : Shaking incubator (Cooling & Heating) 2D & 3D Motion 19. BAE07-H300 : Shaking incubator (Heating) 2D & 3D Motion 20. BAE07-C2000 : Shaking incubator (Cooling & Heating) 6 Micro Well Plate 21. BAE07-H2000 : Shaking incubator (Heating) 6 Micro Well Plate THERMO BATH 22. ALB64 : 1 block capacity 99Hour 59Min- 23. ALB128 : 2 blocks capacity 99Hour 59Min- 24. ALB-H1 : 1 block capacity 99Hour 59Min- 25. ALB-H2 : 2 blocks capacity 99Hour 59Min- 26. ALB-H4 : 4 blocks capacity 99Hour 59Min- COOL BLOCK 27. ALB6400 : Peltier cooling system 99Hour 59Min- 1 block capacity 28. ALB-C1: Peltier cooling system 99Hour 59Min- 1 block capacity compact ROCKER 29. CR95 : Compact size 6 step selective speed 30. CR100 : Compact size Variable speed 180 Min- 31. CR300 : FINEPCR standard size Variable speed 180 Min- 32. CR300t : FINEPCR standard size Variable speed Digital display of RPM Twist SHAKER(3D Motion) 33. TW3 : Variable speed 180 min-timer 34. TW3t : Variable speed 180 min-timer Digital display of RPM MULTI SHAKER(2D & 3D Motion) 35. FMS2 : 5step angle adjustment small size Variable speed 36. FMS3 : 5step angle adjustment 180 min-timer Variable speed orbital /reciprocating SHAKER 37. SH30 : Variable speed 180 Min- Orbltal 38. SH30t : Variable speed 180 Min- Digital display of RPM Orbltal 39. SH30L : Variable speed 180 Min- 40. SH30L-t : Variable speed 180 Min- Digital display of RPM Reciprocating ROTATOR 41. AG : Rotator Adjustable angle Digital display of RPM 42. HAG : Rotisserie rotator Adjustable angle Digital display of RPM Gel Elutor 43. PAK6 : Economical & quickest equipment MAGNETIC STIRRER 44. ST5 : Multi-position without heating 5point 45. ST10 : Multi-position without heating 10point Heat SEALER 46. SK210 : 200mm(7.9'")sealing length 47. SK310 : 300mm(11.8'")sealing length 02p 03p 04p 05p 06p 07p 08p 09p 10p 11p 12p 13p 14p 15p 16p 17p 18p 19p 20p 21p 22p 23p 24p 25p 26p 27p 28p 29p 30p 31p 32p
CONICAL TUBE MIXER TM Incubator-CONICAL TUBE MIXER TM Ideal mixing & heating for sample in conical tubes Digital microprocessor control [PID] : digital display Well designed ventilation system provides with accurate temperature control Temperature range from ambient +5 C to 65 C Orbit of 6mm in low speed and orbit of 40mm in high speed Variable speed range : 60~500rpm High quality permanent DC brushless motor for gentle and powerful motion Continuous or timed operation Rack for 50ml conical tube : 12ea or Rack for 15ml conical tube : 18ea LED display (Shown actual speed or time) up and over door confido-s50 confido-s50h heating Accessory Model confido-s50 confido-s50h Orbit Range Low speed - 6mm / High speed - 40mm Speed Range 60 ~ 500rpm Capacity conical tube 50ml 12 ea conical tube 15ml 18 ea Temp. Range Ambient +5 C~65 C Temp. Accuracy 0.2 C 99hour 59min Dimensions (mm) W210 D369 H231 W280 D423 H257 (kg) 8kg 14kg 35W 330W Free Voltage (AC100~240V) AC100V / 50/60Hz AC110V / 50/60Hz AC220V / 50/60Hz AC230V / 50/60Hz CO-5012 CO-1518 (Rack for 12X50ml conical tubes) (Rack for 18X15ml conical tubes) 2
DUAL MOTION SHAKER or Change between orbital or reciprocating motion Smooth and powerful orbital or reciprocating motion at a low speed Optional platform available for flasks LED display (shown actualy speed or time) High quality permanent DC brushless motor for gentle and powerful motion. Continuous or timed operation 2D-300 2D-400 Accessory Model 2D-300 2D-400 Shaking Range 14mm 28mm Speed Range 45-400rpm Motor BLDC motor 99hour 59min Temp. Resist Lower than 55 C Loadable weight 4kgs 6kgs 13kgs 17kgs Dimensions(mm) 320x410x140 430x520x140 Platform(mm) 300x300 400x400 30w Free Voltage (AC100~240V) Accessories (Flask holder for 2D-300/2D-400) Model number CP50 CP100 CP250 CP500 50ml flask holder 100ml flask holder 250ml flask holder 500ml flask holder Accessories (2D-300) 50ml holder/cp50 100ml holder/cp100 250ml holder/cp250 FT302-100-13 FT302-250-8 FT302-500-5 500ml holder/cp500 PLATE / FT302 FT302-50-13 2D Silicon Rack-300 Model number FT302-50-13 Flask rack for 50ml flask-capacity : 13ea FT302-100-13 Flask Rack for 100ml flask-capacity : 13ea FT302-250-8 Flask Rack for 250ml flask -capacity : 8ea FT302-500-5 Flask Rack for 500ml flask -capacity : 5ea FT302 Universal plate for flask holder (300x300mm) 2D Silicon RACK-300 Silicon Rack for Shaker 2D-300 FT402-50-25 FT402-100-25 FT402-250-14 FT402-500-9 PLATE / FT402 2D Silicon Rack-400 Accessories (2D-400) Model number FT402-50-25 Flask rack for 50ml Flask-capacity : 25ea FT402-100-25 Flask Rack for 100ml flask-capacity : 25ea FT402-250-14 Flask Rack for 250ml flask -capacity : 14ea FT402-500-9 Flask Rack for 500ml flask -capacity : 9ea FT402 Universal plate for flask holder (400x400mm) 2D Silicon RACK-400 Silicon Rack for Shaker 2D-400 3
FINEV RTEX TM 4S Simple Do not need any other accessories. Universal rack can be used for all kinds of tubes. Smooth touch Strong Very powerful and stable motion without noise on 3,000rpm. Stable Special Rubber feet with shock-absorber system prevent it from moving around on a desk. Model Orbit range Speed range FINEVORTEX 4mm 0 ~ 3000rpm Temp.Resist 5 C~ 40 C 1.9kg (packing : 2.5kg) Dimensions (mm) W145 D175 H140 30W AC 110V / 220V / 230V, 50/60Hz FINEV COLOR RTEX TM Unit FINEVORTEX, 110V FINEVORTEX, 220V FINEVORTEX, 230V Continue Vortex Mixer (with rubber platform) Vortex Mixer (with rubber platform) Vortex Mixer (with rubber platform) CE cert. DARK BLUE WHITE GRAY Touching mode HOW TO USE Stop 3 STEP SWITCH Touch Universal Rack All kinds of test tubes can be loaded on the unversial rack. 1.5ml Tube 15ml Tube 50ml Tube Flask Continuous mode Shock-absober feet Anti-vibration during the vortexing of the FINEVORTEX. The shock-absorber feet is holding the ground not to slip. without slipping 1.5ml centrifuge Tube Using Rubber platform mode (RP-70) 15ml Conical Tube Rubber platform (RP-70) Rubber platform provides easier vortexing for two or three tubes at the same time. Using two tubes at the same time Smooth touching with 15ml tube 4
MICROMIXER Micro well plates mixer - ideal mixing combination Compact mixer with vibration and small orbit for effective mixing Smooth vibrating motion Continuous or timed operation MX4 : standard platform for 4 micro well plates MX2 : standard platform for 2 micro well plates Optional rack for 1.5ml centrifuge tube Simple Silicone holders for easy and speed of plate installation MX2 MX4 Accessory TM Speed Model MX2 MX4 Orbit Range Vibration 3mm micro well plate & 1.5ml tube 0 ~ 2000rpm 300 ~ 1400rpm deep well plate - 300 ~ 1000rpm MR 1.5-24(for 1.5ml Tubes) Plate installation 60min 180min 3kg 7.7kg Dimensions (mm) W176 D339 H98 W290 D320 H119 4.4W 35W AC 110V / 220V / Free Voltage 230V, 50/60Hz (AC100~240V) 1 2 simple silicon holders allow quick and easy fitting of micro well plates and optional rack for 1.5ml centrifuge tube. Unit MX2, 110V MX2, 220V MX2, 230V Accessories MR1.5-24 Micromixer (without tube rack) Micromixer (without tube rack) Micromixer (without tube rack) CE cert. Tube rack / 1.5ml centrifuge tube capacity: 24ea 5
MICROMIXER Micro well plate mixer with digital High quality permanent DC brushless motor for gentle and powerful motion confido - S202 : Standard platform for 4 micro well plates confido - S20 : Standard platform for 2 micro well plates Continuous or timed operation Optional rack for 1.5ml centrifuge tubes Simple silicon holders for easy and speedy of plate installation. LED display (Shown actual speed or time) confido-s20 confido-s202 Accessory TM Speed Model confido-s202 confido-s20 Orbit Range 3mm micro well plate & 1.5ml tube 300 ~ 1600rpm 300 ~ 2000rpm deep well plate 300 ~ 1400rpm - micro well plate 4ea 2ea Capacity deep well plate 4ea - 1.5ml tube 96ea 48ea 99hour 59min Dimensions (mm) W290 D330 H141 W180 D330 H131 (kg) 6kg 5kg 25W Free Voltage (AC100~240V) Plate installation 1 2 MR 1.5-24(for 1.5ml Tubes) simple silicon holders allow quick and easy fitting of micro well plates and optional rack for 1.5ml centrifuge tube. 6
thermo-micromixer up and over door Micro well plate mixer with heating Digital microprocessor control [PID] : digital display Well designed ventilation system provides with accurate temperature control confido - S202H : Standard platform for 4 micro well plates confido - S20H : Standard platform for 2 micro well plates Temperature range from ambient +5 C to 65 C High quality permanent DC brushless motor for gentle and powerful motion Continuous or timed operation Optional rack(mr1.5-24) for 1.5ml centrifuge tubes Simple silicon holders for easy and speedy of plate installation. LED display (Shown actual speed or time) up and over door confido-s20h heating up and over door confido-s202h heating Accessory Plate installation 1 2 MR 1.5-24(for 1.5ml Tubes) simple silicon holders allow quick and easy fitting of micro well plates and optional rack for 1.5ml centrifuge tube. TM Speed Model confido-s202h confido-s20h Orbit Range 3mm micro well plate & 1.5ml tube deep well plate 300 ~ 1600rpm 300 ~ 2000rpm 300 ~ 1400rpm micro well plate 4ea 2ea Capacity deep well plate 4ea 2ea 1.5ml tube 96ea 48ea Temp. Range Ambient +5 C~65 C Temp. Accuracy 0.2 C 99hour 59min Dimensions (mm) W384 D423 H257 W280 D423 H257 (kg) 13kg 10.5kg 580W 320W AC100V / 50/60Hz AC110V / 50/60Hz AC220V / 50/60Hz AC230V / 50/60Hz AC240V / 50/60Hz 7
compact INCUBATOR compact INCUBATOR Digital micro processor control [PID] for highest accuracy Rubber magnet sealed door Unique dual insulation construction for recovering the set temperature rapidle after opening the door Safety features : Flashing alarm lamp to warn over-temperature Over-temperature cut-out Over-temperature safety thermostate Can choose 2 6shelf AR6 Model Temp. Range Temp. Accuracy Temp. System Dimensions(mm) Unit AR6, 110V AR6, 220V AR6, 230V Compact INCUBATOR Compact INCUBATOR Compact INCUBATOR AR6 Ambient +5 C~65 C 0.5 C Air circulation (PID system) 99hour 59min 13kg outside : W370 x D395 x H400 inside : W310 x D280 x H270 400W AC 110V/220V/230V, 50/60Hz Accessories 6Shelf 300mm 270mm 6 SHELF 8
hybridization INCUBATOR TM Can choose rocking plate for washing Can choose 2 shelf Standard incubator - high capacity rotisserie Digital microprocessor control [PID] for highest accuracy Rubber magnet sealed door A wide choice of rotisseries ; especially large capacity rotisserie for small and large bottles Optional rocking platform for washing Unique dual insulation construction for recovering the set temperature rapidly after opening the door Safety features : Flashing alarm lamp to warn over-temperature Over-temperature cut-out Over temperature safety thermostat Model combi-h12 Temp. Range Ambient +5 C 80 C Temp. Accuracy 0.5 C Rotational Speed Material Dimensions (mm) 99hour 59min 0 ~ 40 rpm Inside chamber : Stainless steel 26kg Overall : W508 D420 H346 Internal : W365 D280 H286 400W AC 110V / 220V / 230V 50/60Hz Unit combi-h12, 110V combi-h12, 220V combi-h12, 230V Hybridization Incubator Hybridization Incubator Hybridization Incubator CEcert. combi-h12 Optional interior electrical socket for use small equipment is available upon special request Rotisseries 12RT-4 80mm Diameter 200mm length bottle - capacity : 4ea 12RT-8 60mm Diameter 200mm length bottle - capacity : 8ea 12RT-12 12RT-8V 12RT-12V 12RT-16V 12RT-24H 12RT200-64 12RT200-96 12RT200-128 40mm Diameter 200mm length bottle - capacity : 12ea 40mm Diameter 120mm length bottle - capacity : 24ea 50ml Conical tube - capacity : 8ea - vertical mount 50ml Conical tube - capacity : 12ea - vertical mount 50ml Conical tube - capacity : 16ea - vertical mount 50ml Conical tube - capacity : 24ea - horizontal mount 1.5ml Centrifuge tube - capacity : 64ea 1.5ml Centrifuge tube - capacity : 96ea 1.5ml Centrifuge tube - capacity : 128ea 12RT-4 12RT-8 12RT-12 12RT-8V 12RT-12V Bottles BT40-120 40mm Diameter 120mm length bottle with silicon cap BT40-200 40mm Diameter 200mm length bottle with silicon cap BT60-200 60mm Diameter 200mm length bottle with silicon cap BT80-200 80mm Diameter 200mm length bottle with silicon cap 12RT-16V 12RT-24H 12RT200-64 12RT200-96 12RT200-128 HY-Bag 12H-DT 12RK-H Silicon cap Bottle 12 shelf Other Accessories 12H-DT Drip tray (W336 D250mm) 12RK-H Rocking Platform (W285 D195 H165, tilt angle : 7 ) HY-Bag Hybridization Bag, Polypropylene (W160 D220mm) 12 Shelf Shelf, Patridish : 6ea 9
hybridization INCUBATOR TM High capacity chambers for multi-purpose application Dual chambers with independent controls Digital microprocessor control [PID] for highest accuracy Rubber magnet sealed door A wide choice of rotisseries ; especially large capacity rotisserie for small and large bottles Optional rocking platform for washing Unique dual insulation construction for recovering the set temperature rapidly after opening the door Safety features : Flashing alarm lamp to warn over-temperature Over-temperature cut-out Over temperature safety thermostat Can choose rocking plate for washing Can choose 4 shelf Model combi-d24 Temp. Range Ambient +5 C 80 C Temp. Accuracy 0.5 C Rotational Speed Meterial Dimensions (mm) 99hour 59min 0 ~ 40 rpm Inside chamber : Stainless steel 51kg Overall : W508 D420 H703 Internal : W365 D280 H286 800W AC 110V / 220V / 230V, 50/60Hz Unit combi-d24, 110V combi-d24, 220V combi-d24, 230V Hybridization Incubator Hybridization Incubator Hybridization Incubator CE cert. Rotisseries 12RT-4 80mm Diameter 200mm length bottle - capacity : 4ea 12RT-8 60mm Diameter 200mm length bottle - capacity : 8ea 12RT-12 40mm Diameter 200mm length bottle - capacity : 12ea 40mm Diameter 120mm length bottle - capacity : 24ea 12RT-8V 50ml Conical tube - capacity : 8ea - vertical mount 12RT-12V 50ml Conical tube - capacity : 12ea - vertical mount 12RT-16V 50ml Conical tube - capacity : 16ea - vertical mount 12RT-24H 50ml Conical tube - capacity : 24ea - horizontal mount 12RT200-64 1.5ml Centrifuge tube - capacity : 64ea 12RT200-96 1.5ml Centrifuge tube - capacity : 96ea 12RT200-128 1.5ml Centrifuge tube - capacity : 128ea combi-d24 Optional interior electrical socket for use small equipment is available upon special request Bottles BT40-120 40mm Diameter 120mm length bottle with silicon cap BT40-200 40mm Diameter 200mm length bottle with silicon cap BT60-200 60mm Diameter 200mm length bottle with silicon cap BT80-200 80mm Diameter 200mm length bottle with silicon cap 12RT-4 12RT-8 12RT-12 12RT-8V 12RT-12V Other Accessories 12H-DT Drip tray (W336 D250mm) 12RK-H Rocking Platform (W285 D195 H165, tilt angle : 7 ) HY-Bag Hybridization Bag, Polypropylene (W160 D220mm) 12 Shelf Shelf, Patridish : 6ea 12RT-16V 12RT-24H 12RT200-64 12RT200-96 12RT200-128 HY-Bag 12H-DT 12RK-H Silicon cap Bottle 12 shelf 10
hybridization INCUBATOR TM Can choose rocking plate for washing Can choose 2 shelf Vertical type construction for efficient bench space Digital microprocessor control [PID] for highest accuracy Rubber magnet sealed door A wide choice of rotisseries ; especially large capacity rotisserie for small and large bottles Optional rocking platform for washing Unique dual insulation construction for recovering the set temperature rapidly after opening the door Safety features : Flashing alarm lamp to warn over-temperature Over-temperature cut-out Over temperature safety thermostat Model combi-v12 Temp. Range Ambient +5 C 80 C Temp. Accuracy 0.5 C 99hour 59min Rotational Speed 0 ~ 40 rpm Meterial Inside chamber : Stainless steel 30kg Dimensions (mm) Overall : W468 D435 H443 Internal : W365 D280 H286 400W AC 110V / 220V / 230V, 50/60Hz combi-v12 Optional interior electrical socket for use small equipment is available upon special request Unit combi-v12, 110V combi-v12, 220V combi-v12, 230V Rotisseries Hybridization Incubator Hybridization Incubator Hybridization Incubator CE cert. 12RT-4 80mm Diameter 200mm length bottle - capacity : 4ea 12RT-8 60mm Diameter 200mm length bottle - capacity : 8ea 12RT-12 12RT-8V 12RT-12V 12RT-16V 12RT-24H 12RT200-64 12RT200-96 12RT200-128 40mm Diameter 200mm length bottle - capacity : 12ea 40mm Diameter 120mm length bottle - capacity : 24ea 50ml Conical tube - capacity : 8ea - vertical mount 50ml Conical tube - capacity : 12ea - vertical mount 50ml Conical tube - capacity : 16ea - vertical mount 50ml Conical tube - capacity : 24ea - horizontal mount 1.5ml Centrifuge tube - capacity : 64ea 1.5ml Centrifuge tube - capacity : 96ea 1.5ml Centrifuge tube - capacity : 128ea 12RT-4 12RT-8 12RT-12 12RT-8V 12RT-12V Bottles BT40-120 40mm Diameter 120mm length bottle with silicon cap BT40-200 40mm Diameter 200mm length bottle with silicon cap BT60-200 60mm Diameter 200mm length bottle with silicon cap BT80-200 80mm Diameter 200mm length bottle with silicon cap 12RT-16V 12RT-24H 12RT200-64 12RT200-96 12RT200-128 HY-Bag 12H-DT 12RK-H Silicon cap Bottle 12 shelf Other Accessories 12H-DT Drip tray (W336 D250mm) 12RK-H Rocking Platform (W285 D195 H165, tilt angle : 7 ) HY-Bag Hybridization Bag, Polypropylene (W160 D220mm) 12 Shelf Shelf, Patridish : 6ea 11
hybridization INCUBATOR TM Rotisserie and shaker in one unit Digital microprocessor control [PID] for highest accuracy Rubber magnet sealed door Orbital shaking platform with clamps for 6x250ml flasks A wide choice of rotisseries ; especially large capacity rotisserie for small and large bottles Optional rocking platform for washing Unique dual insulation construction for recovering the set temperature rapidly after opening the door Safety features : Flashing alarm lamp to warn over-temperature Can choose 2 Over-temperature cut-out Over temperature safety thermostat Door electronic safe switch Can choose rocking plate for washing shelf Model combi-sv12 Temp. Range Ambient +5 C 80 C Temp. Accuracy 0.5 C Speed Rotation 0 ~ 40 rpm Shaker 0 ~ 300 rpm 99hour 59min Meterial Inside chamber : Stainless steel 36kg Dimensions (mm) Unit combi-sv12, 110V combi-sv12, 220V combi-sv12, 230V Rotisseries Overall : W468 D435 H443 Internal : W365 D280 H286 400W AC 110V / 220V / 230V, 50/60Hz Hybridization Incubator Hybridization Incubator Hybridization Incubator CEcert. 12RT-4 80mm Diameter 200mm length bottle - capacity : 4ea 12RT-8 60mm Diameter 200mm length bottle - capacity : 8ea 12RT-12 12RT-8V 12RT-12V 12RT-16V 12RT-24H 12RT200-64 12RT200-96 12RT200-128 Bottles 40mm Diameter 200mm length bottle - capacity : 12ea 40mm Diameter 120mm length bottle - capacity : 24ea 50ml Conical tube - capacity : 8ea - vertical mount 50ml Conical tube - capacity : 12ea - vertical mount 50ml Conical tube - capacity : 16ea - vertical mount 50ml Conical tube - capacity : 24ea - horizontal mount 1.5ml Centrifuge tube - capacity : 64ea 1.5ml Centrifuge tube - capacity : 96ea 1.5ml Centrifuge tube - capacity : 128ea BT40-120 40mm Diameter 120mm length bottle with silicon cap BT40-200 40mm Diameter 200mm length bottle with silicon cap BT60-200 60mm Diameter 200mm length bottle with silicon cap BT80-200 80mm Diameter 200mm length bottle with silicon cap Other Accessories 12H-DT Drip tray (W336 D250mm) 12RK-SV Rocking Platform (W285 D195 H165, tilt angle : 7 ) HY-Bag Hybridization Bag, Polypropylene (W160 D220mm) FR250-6 Shaking platform(w336 D250)for 250ml flask-capacity:6ea STB3320 Shaking platform(w336 D250mm) 12 Shelf Shelf, Patridish:6ea combi-sv12 Optional interior electrical socket for use small equipment is available upon special request 12RT-16V 12RT-24H 12RT200-64 HY-Bag 12H-DT 12RK-SV 12 shelf STB3320 12RT-4 12RT-8 12RT-12 12RT-8V 12RT-12V 12RT-200-96 Silicon cap Bottle 12RT200-128 FR250-6 12
hybridization INCUBATOR TM Can choose rocking plate for washing Can choose 4 shelf High capacity for shaking platform & rotisserie, all in one Simultaneous operation of the shaker and the upper rotisserie Digital microprocessor control[pid] for highest accuracy Rubber magnet sealed door Orbital shaking platform with clamps for 6x250ml flasks A wide choice of rotisseries; especially large capacity rotisserie for small and large bottles Optional rocking platform for washing Unique dual insulation construction for recovering the set temperature rapidly after opening the door Safety features : Flashing alarm lamp to warn over-temperature Over-temperature cut-out Over temperature safety thermostat Door electronic safe switch Model combi-sv120 Temp. Range Ambient +5 C 80 C Temp. Accuracy 0.5 C Speed Rotation 0 ~ 40 rpm Shaker 0 ~ 300 rpm 99hour 59min Meterial Inside chamber : Stainless steel 46kg Dimensions (mm) Overall : W480 D420 H720 Internal : W363 D278 H545 400W AC 110V / 220V / 230V, 50/60Hz combi-sv120 Optional interior electrical socket for use small equipment is available upon special request 12RT-4 12RT-8 12RT-12 12RT-8V 12RT-12V 12RT-16V 12RT-24H 12RT200-64 12RT-200-96 12RT200-128 Unit combi-sv120, 110V combi-sv120, 220V combi-sv120, 230V Rotisseries Hybridization Incubator Hybridization Incubator Hybridization Incubator CEcert. 12RT-4 80mm Diameter 200mm length bottle - capacity : 4ea 12RT-8 60mm Diameter 200mm length bottle - capacity : 8ea 12RT-12 12RT-8V 12RT-12V 12RT-16V 12RT-24H 12RT200-64 12RT200-96 12RT200-128 Bottles 40mm Diameter 200mm length bottle - capacity : 12ea 40mm Diameter 120mm length bottle - capacity : 24ea 50ml Conical tube - capacity : 8ea - vertical mount 50ml Conical tube - capacity : 12ea - vertical mount 50ml Conical tube - capacity : 16ea - vertical mount 50ml Conical tube - capacity : 24ea - horizontal mount 1.5ml Centrifuge tube - capacity : 64ea 1.5ml Centrifuge tube - capacity : 96ea 1.5ml Centrifuge tube - capacity : 128ea BT40-120 40mm Diameter 120mm length bottle with silicon cap BT40-200 40mm Diameter 200mm length bottle with silicon cap BT60-200 60mm Diameter 200mm length bottle with silicon cap BT80-200 80mm Diameter 200mm length bottle with silicon cap HY-Bag 12H-DT 12RK-SV 12 shelf STB3320 Silicon cap Bottle FR250-6 Other Accessories 12H-DT Drip tray (W336 D250mm) 12RK-SV Rocking Platform (W285 D195 H165, tilt angle : 7 ) HY-Bag Hybridization Bag, Polypropylene (W160 D220mm) FR250-6 Shaking platform(w336 D250)for 250ml flask-capacity:6ea STB3320 Shaking platform(w336 D250mm) 12 Shelf Shelf, patridish : 6ea 13
Shaking INCUBATOR TM Variable plate for heating and shaking Incubator Between the inside of mechanism and chamber are separated, therefore, there is no loss of heat. BAE MECHANISM(patented, 5step angle adjustment system) allows orbital motion and various twist for movement Digital micro processor control [PID] for highest accuracy Can select heating & cooling mode or heating mode Orbit of 18mm for best mixing result especially for get and blotting convenient upward opening door Dual mat to accommodate each vessels in the proper mat LED display for actual speed Safety features : Flashing alarm lamp to warn over-temperature Over-temperature cut-out Over-temperature safety thermostate TM MR1.5-24 3D &2D motion BAE07-H300 heating BAE07-C300 heating cooling FT302 - MP4 Rack for flask Unit BAE07-H300, 110V BAE07-H300, 220V BAE07-H300, 230V BAE07-C300, 110V BAE07-C300, 220V BAE07-C300, 230V 50ml plate / FT302-50-13 100ml plate / FT302-100-13 250ml plate / FT302-250-8 for micro well plate(4ea) or 1.5ml centrifuge tube(96ea) Dimple pad for conical tubes VIEW OF ACTUAL MOVEMENTS Shaking INCUBATOR Shaking INCUBATOR Shaking INCUBATOR CE cert. Shaking INCUBATOR Shaking INCUBATOR Shaking INCUBATOR CE cert. Rubber mat for patridish Model BAE07-H300 BAE07-C300 Speed Range 30-300rpm 30-300rpm orbital range-18mm orbital range~18mm Shaking Angle 3D twist 5 3D twist 10 3D twist 15 3D twist 20 3D twist 5 3D twist 10 3D twist 15 3D twist 20 Temp. Range Ambient +5 C~80.0 C 15.0 C~65.0 C Dimensions(mm) W470xD630xH410 W470xD630xH410 34kg 39kg 610W 810W AC 110V/220V/230V, 50/60Hz Shaking Capacities Model BAE07-H300 BAE07-C300 1.5ml Tubes Conical Tubes(50ml) Patridish Micro Well Plate Deep Well Plate Flask 50ml Flask 100ml Flask 250ml Other Accessories FT302-MP4 FT302-50-13 FT302-100-13 FT302-250-8 96ea 14ea 9ea 4ea 4ea 13ea 13ea 8ea Rack for micro well plate - Capacity : 4ea Flask Rack for 50ml flask - Capacity : 13ea Flask Rack for 100ml flask - Capacity : 13ea Flask Rack for 250ml flask - Capacity : 8ea 14
Shaking INCUBATOR TM [for micro well plate] well design for heating and shaking Incubato Between, the inside of mechanism and chamber are separated, therefore, there is no loss of heat. Digital micro processor control [PID] for highest accuracy Can select heating & cooling mode or heating mode Variable speed between 300 to 2000rpm Convenient upward opening door Standard platform for six microplates Simple silicon holders for easy and speed of plate installation LED display for actual speed Safety features : Flashing alarm lamp to warn over-temperature Over-temperature cut-out Over-temperature safety thermostate 2D motion BAE07-H2000 heating BAE07-C2000 heating cooling Model BAE07-H2000 BAE07-C2000 Speed Range 300-2000rpm 300-2000rpm Orbit Range 3mm 3mm Temp. Range Ambient +5 C~65.0 C 15.0 C~65.0 C Dimensions(mm) W470xD630xH410 W470xD630xH410 34kg 39kg 610W 810W AC 110V/220V/230V, 50/60Hz Unit BAE07-H2000, 110V Shaking INCUBATOR BAE07-H2000, 220V Shaking INCUBATOR BAE07-H2000, 230V Shaking INCUBATOR CE cert. BAE07-C2000, 110V Shaking INCUBATOR BAE07-C2000, 220V Shaking INCUBATOR BAE07-C2000, 230V Shaking INCUBATOR CE cert. TM Shaking Capacities Model BAE07-H2000 BAE07-C2000 1.5ml Tubes 144ea 144ea Micro Well Plate 6ea 6ea Deep Well Plate 6ea 6ea 1.5ml centrifuge tube : 24ea MR1.5-24 15
THERMO BATH [Block Heater] High temperature heating without the need for oil and water Digital microprocessor control [PID] for highest accuracy A variety of interchangeable insert blocks Block combined with the close fit of the tubes for fast efficient heat transfer Special thicker blocks guarantee excellent temperature stability Standard flat covers for protecting the user from accidentally touching a hot block and spitting tubes Safety features : Flashing alarm lamp to warn over-temperature Over-temperature cut-out Over temperature safety thermostat ALB64 heating Model ALB 64 ALB 128 Temp. Range Ambient +5 C 150 C Temp. Accuracy 0.5 C 99hour 59min Heating Method Cartridge Heater Capacity 1Block 2Blocks Material Energy plate and sample block : Aluminum Inside and insulating side : Stainless steel 4kg(without block) 7kg(without block) Dimensions (mm) W148 D230 H155 W238 D230 H155 250W 600W AC 110V / 220V / 230V, 50/60Hz Unit ALB64, 110V ALB64, 220V ALB64, 230V ALB128, 110V ALB128, 220V Block ALB128, 230V THERMO BATH. (with CV64-F) THERMO BATH. (with CV64-F) THERMO BATH. (with CV64-F) CE cert. THERMO BATH. (with CV128-F) THERMO BATH. (with CV128-F) THERMO BATH. (with CV128-F) CE cert. AB90-0.2 Block / 0.2ml centrifuge tube (90 90 H60) - capacity : 64ea AB90-0.5 Block / 0.5ml centrifuge tube (90 90 H60) - capacity : 49ea AB90-1.5 Block / 1.5ml centrifuge tube (90 90 H60) - capacity : 36ea AB90-12 Block / 12 Test tube (90 90 H60) - capacity : 36ea AB90-13 Block / 13 Test tube (90 90 H60) - capacity : 25ea AB90-15 Block / 15 Test tube (90 90 H60) - capacity : 25ea AB90-16.5 Block / 16.5 Test tube (90 90 H60) - capacity : 20ea AB90-18 Block / 18 Test tube (90 90 H60) - capacity : 20ea AB90-C15 Block / 15ml conical tube (90 90 H80) - capacity : 9ea AB90-C50 Block / 50ml conical tube (90 90 H80) - capacity : 5ea GB90 Ball bath (zinc ball) AB128-MPL Other Accessories Block plate / micro plate - capacity : 1ea (for ALB128) JD90 Block extraction tool CV64-80 High cover for Test tube (W115 D115 H80mm) CV128-80 High cover for Test tube (W230 D115 H80mm) ALB128 Other types of blocks are available upon special request Cover AB90-C15 heating AB90-0.2 AB90-0.5 AB90-1.5 AB90-12 AB90-13 AB90-C50 GB-90(Ball bath) AB128-MPL (For micro plate) CV64-80 CV128-80 CV64 -F CV128-F JD-90 16
[Block Heater] THERMO BATH Special thicker blocks guarantee excellent temperature stability Digital microprocessor control [PID] for highest accuracy A variety of interchangeable insert blocks Block combined with the close fit of the tubes for fast efficient heat transfer Standard flat covers for protecting the user from accidentally touching a hot block and spitting tubes Safety features : Flashing alarm lamp to warn over-temperature Over-temperature cut-out Over temperature safety thermostate ALB-H4 heating ALB-H2 heating ALB-H1 heating TM Other types of blocks are available upon special request TM Model ALB-H1 ALB-H2 ALB-H4 Temp. Range Ambient +5 C~ 150.0 C 99hour 59min Temp. Accuracy 0.5 C Heating Method cartridge Heater 150W - 2ea cartridge Heater 300W - 2ea cartridge Heater 300W - 4ea Block Capacity 1 Block 2 Blocks 4 Blocks Material Energy plate and sample block : Aluminum Inside and insulating side : Stainess steel Dimensions(mm) W200 D270 H130 W200 D360 H150 W335 D360 H150 310W 610W 1200W 3kg (without block) 6kg (without block) 10kg (without block) AC 110V/220V/230V, 50/60Hz AB100-1524(with Rack) AB100-0548 AB100-1548 AB100-96 AB100-508 AB100-1516 JD-90 Cover CVH4-80 CVH2-80 CVH1-80 CVH4-F CVH2-F CVH1-F Block AB100-96 AB100-0548 AB100-1548 AB100-1524 AB100-1516 AB100-508 Other Accessories JD90 CVH1-80 CVH2-80 CVH4-80 Block / 96PCR plate - capacity : 1ea or 8 strip tube - capacity : 12ea Block / 0.5ml centrifuge tube - capacity : 48ea Block / 1.5ml centrifuge tube - capacity : 48ea Block / 1.5ml centrifuge tube - capacity : 24ea Block / 1 5ml conical tube - capacity : 16ea Block / 50ml conical tube - capacity : 8ea Block extraction tool High cover for conical tube (for ALB-H1) High cover for conical tube (for ALB-H2) High cover for conical tube (for ALB-H4) 17
cool BLOCK Cooling and heating in one unit Digital microprocessor control [PID] ; Digital display Independent cooling and heating systems for years of trouble-free operation A variety of interchangeable insert blocks Block combined with the close fit of the tubes for fast efficient heat transfer Special thicker blocks guarantee excellent temperature stability Safety features : Flashing alarm lamp to warn over-temperature Over-temperature cut-out Over temperature safety thermostat Model ALB 6400 Temp. Range Temp. Accuracy Cooling Method Heating Method Material Dimensions (mm) 0 C ~ 95 C 0.5 C 99hour 59min Peltier Cartridge heater Energy plate and sample block : Aluminum Inside and insulating side : Stainless steel 8kg (without block) W190 D278 H230 300W AC 110V / 220V / 230V, 50/60Hz ALB6400 cooling heating Unit ALB6400, 110V ALB6400, 220V ALB6400, 230V cool BLOCK (with CV6400-F) cool BLOCK (with CV6400-F) cool BLOCK (with CV6400-F) CE cert. Block Descripton AB90-0.2 Block / 0.2ml centrifuge tube (90 90 H60) - capacity : 64ea AB90-0.5 Block / 0.5ml centrifuge tube (90 90 H60) - capacity : 49ea AB90-1.5 Block / 1.5ml centrifuge tube (90 90 H60) - capacity : 36ea AB90-12 Block / 12 Test tube (90 90 H60) - capacity : 36ea AB90-13 Block / 13 Test tube (90 90 H60) - capacity : 25ea AB90-15 Block / 15 Test tube (90 90 H60) - capacity : 25ea AB90-16.5 Block / 16.5 Test tube (90 90 H60) - capacity : 20ea AB90-18 Block / 18 Test tube (90 90 H60) - capacity : 20ea AB90-C15 Block / 15ml conical tube (90 90 H80) - capacity : 9ea AB90-C50 Block / 50ml conical tube (90 90 H80) - capacity : 5ea Other Accessories JD90 GB90 Block extraction tool Ball bath (zinc ball) CV6400-80 High cover for test tube (W115 D115 H80mm) Other types of blocks are available upon special request AB90-0.2 AB90-C15 AB90-0.5 AB90-C50 AB90-1.5 GB-90(Ball bath) AB90-12 JD-90 Cover CV6400-80 CV6400-F AB90-13 18
cool BLOCK Special thicker blocks guarantee excellent temperature stability Digital microprocessor control [PID] for highest accuracy A variety of interchangeable insert blocks Block combined with the close fit of the tubes for fast efficient heat transfer Standard flat covers for protecting the user from accidentally touching a hot block and spitting tubes Safety features : Flashing alarm lamp to warn over-temperature Over-temperature cut-out Over temperature safety thermostate ALB-C1 cooling heating AB100-1524(with Rack) Cover Other types of blocks are available upon special request AB100-0548 AB100-1548 AB100-96 AB100-508 AB100-1516 JD-90 Unit CVC1-80 TM ALB-C1, 110V ALB-C1, 220V ALB-C1, 230V CVC1-F cool BLOCK (with CVC1-F) cool BLOCK (with CVC1-F) cool BLOCK (with CVC1-F) CE cert. Block Model ALB -C1 Temp. Range Temp. Accuracy Cooling Method Heating Method Block Capacity Material Dimensions(mm) AB100-96 AB100-0548 AB100-1548 AB100-1524 AB100-1516 AB100-508 Other Accessories JD90 CVC1-80 0.0 C ~ 95.0 C 99hour 59min 0.5 C peltier cartridge Heater 150W - 2ea 1 Block Energy plate and sample block : Aluminum Inside and insulating side : Stainess steel W200 D300 H190 360W 11.5kg (without block) AC 110V/220V/230V, 50/60Hz Block / 96PCR plate - capacity : 1ea or 8 strip tube - capacity : 12ea Block / 0.5ml centrifuge tube - capacity : 48ea Block / 1.5ml centrifuge tube - capacity : 48ea Block / 1.5ml centrifuge tube - capacity : 24ea Block / 1 5ml conical tube - capacity : 16ea Block / 50ml conical tube - capacity : 8ea Block extraction tool High cover for Conical tube (for ALB-C1) 19
compact ROCKER TM Economical and compact rocker Set speed setting of 4, 8, 12, 16, 24, and 32 rpm Suitable for continuous operation Can be used in incubators up to 80 C Sturdy and durable construction for use at high and low temperature Non-slip mat as standard ; optional dimpled mat prevents tubes from rolling around All moving parts of the rocking platform are combined with ball joints for smooth operation and years of consistent operation CR95 Model CR95 Tilt Angle 7 Speed Range selected 4 ~ 32rpm (6steps) Motor DC 3.5A, Engineering Plastic gear Temp. Resist Lower than 80 C(Dry air) Loadable 5kg 6kg Dimensions (mm) Overall : W290 D210 H167 Platform : W290 D200 18W AC110V / 220V / 230V, 50/60Hz Unit CR95, 110V CR95, 220V CR95, 230V Accessories DP-95 TY95 compact Rocker (with silicon mat) compact Rocker (with silicon mat) compact Rocker (with silicon mat) CE cert. Dimpled mat (W290 X D200 mm) Second platform, (with posts : 4ea) DP-95 TY95 (Second platform) 20
compact ROCKER TM Compact rocker in timed and continuous operation Variable speed control from 0 and 70 rpm Continuous or timed operation Sturdy and durable construction for use at high and low Optional second platform available to double the working area Non-slip mat as standard ; optional dimpled mat prevents tubes from rolling around All moving parts of the rocking platform are combined with ball joints for smooth operation and years of consistent operation CR100 DP-100 Model CR100 Tilt Angel 9 Speed Range Variable 0 ~ 70rpm Motor DC 3.5A, Engineering Plastic gear 180min Temp. Resist Lower than 65 (Dry air) Loadable 7kg 6.5kg Dimensions (mm) Overall : W290 D210 H167 Platform : W290 D200 35W Free Voltage (AC100~240V) TY100 (Second platform) Accessories DP-100 TY100 Dimpled mat (W290 X D200 mm) Second platform, (with posts: 4ea) 21
compact ROCKER TM Large capacity platforms and smooth rocking motion Variable speed control between 0 and 70 rpm Continuous or timed operation Sturdy and durable construction for use at high and low temperature Optional second platform available to double the working area : large upper platform for a variety of flasks and tubes Non-slip mat as standard ; optional dimpled mat prevents tubes from rolling around All moving parts of the rocking platforms are combined with ball joints for smooth operation and years of consistent operation Can select economical model or the version with LED display of rpm CR300 CR300t (with tachometer) Model CR300 CR300t(tachometer) Tilt Angle 9 Speed Range 0 ~ 70 rpm Motor DC 3.5A, Engineering Plastic gear 180min Temp. Resist Lower than 65 C(Dry air) Lower than 55 C(Dry air) Loadable 10kg 8.2kg Dimensions (mm) Accessories Overall : W300 D300 H232 Platform : W300 D300 35W Free Voltage (AC100~240V) DP-300 Dimpled mat(w300 D300 mm) TY300 Second platform, (with posts : 4ea) UP400 400 400 mm upper platform UP500 500 500 mm upper platform DP-300 TY300 (Second platform) UP400 (upper platform 400 x 400 mm) UP500 (upper platform 500 x 500 mm) 22
3Dmotion twist SHAKER TM ful but, reliable 3D orbital motion Gentle 3D motion and sturdy construction for high capacity Continuous or timed operation Standard elastic ties for easy fitting of flasks and conical tubes Optional second platform available to double the working area ; large upper platform for a variety of flasks and tubes Non-slip mat as standard ; optional dimpled mat prevents tubes from rolling around Rubber bellows for maximum user safety to protect the user from accidentally jamming user's fingers Can select economical model or the version with LED display of rpm TW3 TW3t (with tachometer) DP-300 TY300 (Second platform 300 x 300 mm) UP400 (upper platform 400 x 400 mm) Model TW3 TW3t(tachometer) Tilt Angle 7 Speed Range 0 ~ 70 rpm Motor DC 3.5A, Engineering Plastic gear 180min Temp. Resist Lower than 65 C(Dry air) Lower than 55 C(Dry air) Loadable 5kg 9kg Dimensions (mm) Accessories DP-300 TY300 Overall : W300 D300 H232 Platform : W300 D300 35W Free Voltage (AC100~240V) Dimpled mat (W300 X D300 mm) Second platform, (with posts : 4ea) UP400 400 400mm upper platform 23
mini Multi SHAKER [Adjustable - 3D & 2D motion] Compact multi shaker for incubator BAE MECHANISM(patented, 5 step angle adjustment system)allows orbital motion and varioius twist movement Sealed construction to prevent heat transfer from motor to platform for use in incubator and cold chamber Variable speed control, from 5 to 90 rpm Orbit of 18mm for best mixing result especially for gel and blotting 20cm 20cm platform for efficient incubator operation Dual mat to accommodate each vessels in the proper mat FMS2 VIEW OF ACTUAL MOVEMENTS Model FMS2 Speed range 5 ~ 90 rpm Motor DC Warm Geard motor Temp. Resist Lower than 65 C(Hum 90%) Loadable weight 1Kg 3Kg Dimensions(mm) W200 D200 H127 50W Free Voltage (AC100~240V) The table for angle adjustment Motion select Orbital motion 3D motion FMS2 orbit of 18mm 5, 10, 15, 20 tilt angle 24
Multi SHAKER TM [Adjustable - 3D & 2D motion] Extremely quiet operation with various movement position BAE MECHANISM(patented, 5 step angle adjustment system)allows orbital motion and various twist movement Variable speed between 30 to 300 rpm Orbit of 18mm for best mixing result especially for gel and blotting High quality permanent DC brushless motor for gentle and powerful motion Continuous or timed operation Simple and easy of angle adjustment Dual mat to accommodate each vessels in the proper mat FMS3 VIEW OF ACTUAL MOVEMENTS Model FMS3 Speed range 30 ~ 300 rpm Motor DC Brushless motor Temp. Resist Lower than 55 C(Dry air 85%) Loadable weight 3Kg 180min 12Kg Dimensions(mm) W300 D300 H155 30W Free Voltage (AC100~240V) The table for angle adjustment Motion select FMS3 Orbital motion 3D motion orbit of 18mm 5, 10, 15, 20 tilt angle Other Accessories CP50 CP100 CP250 CP500 FT302-50-13 FT302-100-13 FT302-250-8 FT302-500-5 FT302 50ml flask holder 100ml flask holder 250ml flask holder 500ml flask holder Fiask Rack for 50ml flask-capacity : 13ea Fiask Rack for 100ml flask-capacity : 13ea Fiask Rack for 250ml flask-capacity : 8ea Fiask Rack for 500ml flask-capacity : 5ea Universal plate for flask holder 50ml holder/cp50 50ml plate / FT302-50-13 PLATE / FT302 100ml holder/cp100 100ml plate / FT302-100-13 250ml holder/cp250 250ml plate / FT302-250-8 500ml holder/cp500 500ml plate / FT302-500-5 25
orbital SHAKER SH30 Use with a wide variety of large capacity platforms Smooth and powerful orbital motion at a low speed Continuous or timed operation Optional second platform available to double the working area ; large upper platform for a variety of flasks and tubes Other type flask platform also available upon special request Standard elastic ties for easy fitting of flasks and conical tubes Non-slip mat as standard ; optional dimpled mat prevents tubes from rolling around Can select economical model or the version with LED display of rpm SH30t (with tachometer) DP-300 50ml holder/cp50 PLATE / FT302 TY300 (second platform 300 x 300 mm) UP400 (upper platform 400 x 400 mm) 100ml holder/cp100 FT302 - MP4 250ml holder/cp250 500ml holder/cp500 50ml plate / FT302-50-13 100ml plate / FT302-100-13 250ml plate / FT302-250-8 500ml plate / FT302-500-5 Model SH30 SH30t(tachometer) Orbital range 14mm Speed range 0 ~ 300 rpm Motor DC 3.5A 180min Temp. Resist Lower than 65 C(Dry air) Lower than 55 C(Dry air) Loadable weight 8kg 15kg Dimensions (mm) Accessories DP-300 Dimpled mat (W300 D300 mm) TY300 UP400 UP500 Other Accessories CP50 CP100 CP250 CP500 FT302-50-13 FT302-100-13 FT302-250-8 FT302-500-5 FT302 FT302-MP4 Overall : W300 D300 H158 Platform : W300 D300 35W Free Voltage (AC100~240V) Second platform, (with posts : 4ea) 400 x 400 mm upper platform 500 x 500 mm upper platform 50ml flask holder 100ml flask holder 250ml flask holder 500ml flask holder Fiask Rack for 50ml flask-capacity : 13ea Fiask Rack for 100ml flask-capacity : 13ea Fiask Rack for 250ml flask-capacity : 8ea Fiask Rack for 500ml flask-capacity : 5ea Universal plate for flask holder Rack for micro well plate - Capacity : 4ea 26
reciprocating SHAKER Large capacity platforms - smooth reciprocating motion Smooth and powerful reciprocating motion at a low speed Continuous or timed operation Optional second platform available to double the working area ; large upper platform for a variety of flasks and tubes Standard elastic ties for easy fitting of flaks and conical tubes Non-slip mat as standard ; optional dimpled mat prevents tubes from rolling around Can select economical model or the version with LED display of rpm SH30L SH30L-t (with tachometer) DP-300 50ml holder/cp50 PLATE / FT302 TY300 (second platform 300 x 300 mm) UP400 (upper platform 400 x 400 mm) 100ml holder/cp100 FT302 - MP4 250ml holder/cp250 500ml holder/cp500 50ml plate / FT302-50-13 100ml plate / FT302-100-13 250ml plate / FT302-250-8 500ml plate / FT302-500-5 Model SH30L SH30L-t(tachometer) Reciprocate Range 30mm Speed Range 0 ~ 300 rpm Motor DC 3.5A 180min Temp. Resist Lower than 65 C(Dry air) Lower than 55 C(Dry air) Loadable 8kg 15kg Dimensions (mm) Accessories Overall : W300 D300 H162 Platform : W300 D300 35W Free Voltage (AC100~240V) DP-300 Dimpled mat (W300 D300 mm) TY300 UP400 UP500 Other Accessories CP50 CP100 CP250 CP500 FT302-50-13 FT302-100-13 FT302-250-8 FT302-500-5 FT302 FT302-MP4 Second platform, (with posts : 4ea) 400 x 400 mm upper platform 500 x 500 mm upper platform 50ml flask holder 100ml flask holder 250ml flask holder 500ml flask holder Fiask Rack for 50ml flask-capacity : 13ea Fiask Rack for 100ml flask-capacity : 13ea Fiask Rack for 250ml flask-capacity : 8ea Fiask Rack for 500ml flask-capacity : 5ea Universal plate for flask holder Rack for micro well plate - Capacity : 4ea 27
ROTATOR TM Adjustable speed and angle of rotation Variable speed and adjustable mixing angle, 0 to 90 Continuous or timed operation Durable construction for long-term operation 5 different disks and 3 roller drums ; Disks are also available for 250ml flask Add up to 2 disks together for application LED display for actual speed Model AG Angle Range 0 ~ 90 Speed Range 0 ~ 50rpm 99hour 59min Temp.Resist Lower than 65 C(Dry air) 7.5kg Dimensions (mm) W220 D236 H246 35W Free Voltage (AC100~240V) Disk Descripton D50-8 Disk / 50ml conical tube-capacity: 8ea D15-16 Disk / 15ml conical tube-capacity: 16ea D1.5-32 Disk / 1.5ml centrifuge tube-capacity: 32ea D1.5-60 Disk / 1.5ml centrifugel tube-capacity: 60ea D250-4 Disk / 250ml Flask-capacity: 4ea Roller Drum RD16-151 RD18-104 RD25-42 Descripton Roller Drum / Up to 15mm Diameter tube-capacity : 151ea Roller Drum / Up to 17mm Diameter tube-capacity : 104ea Roller Drum / Up to 24mm Diameter tube-capacity : 42ea AG D1.5-32 D1.5-60 D15-16 D50-8 D250-4 Other Accessories PO-4 Mount knobs for attaching one or two disks to the unit RD16-151 RD18-104 RD25-42 PO-4 28
ROTATOR TM Use with a wide variety of accessories Variable speed and adjustable mixing angle, 0 to 90 Continuous or timed operation A wide choice of accessories to be used, including conical tubes, bottles and 250ml flask Optional rocking platform for washing LED display for actual speed HAG D1.5-32 D1.5-60 D15-16 D50-8 D250-4 RD16-151 RD18-104 RD25-42 12RT-4 12RT-6 12RT-10 12RT-8V 12RT-16V 12RT-24H 12RT200-64 12RT-200-96 12RT200-128 12RT300-120 12RT300-180 12RT300-240 Model HAG Angle Range 0 ~ 90 Speed Range 0 ~ 50rpm 99hour 59min Temp.Resist Lower than 65 C(Dry air) 8kg Dimensions (mm) W502 D236 H246 35W Free Voltage (AC100~240V) Disk D50-8 Disk / 50ml conical tube-capacity : 8ea D15-16 Disk / 15ml conical tube-capacity : 16ea D1.5-32 Disk / 1.5ml centrifuge tube-capacity : 32ea D1.5-60 Disk / 1.5ml centrifuge tube-capacity : 60ea D250-4 Disk / 250ml Flask-capacity: 4ea Roller Drum RD16-151 RD18-104 RD25-42 Roller Drum Roller Drum / Up to 15mm Diameter tube-capacity : 151ea Roller Drum / Up to 17mm Diameter tube-capacity : 104ea Roller Drum / Up to 24mm Diameter tube-capacity : 42ea 12RT-4 80mm Diameter 200mm length bottle-capacity : 4ea 12RT-6 60mm Diameter 200mm length bottle-capacity : 6ea 12RT-10 40mm Diameter 200mm length bottle-capacity : 10ea 40mm Diameter 120mm length bottle-capacity : 20ea 12RT-8V 50ml Conical tube-capacity : 8ea-vertical mount 12RT-16V 50ml Conical tube-capacity : 16ea-vertical mount 12RT-24H 50ml Conical tube-capacity : 24ea-horizontal mount 12RT-200-64 1.5ml Centrifuge tube-capacity : 64ea 12RT-200-96 1.5ml Centrifuge tube-capacity : 96ea 12RT-200-128 1.5ml Centrifuge tube-capacity : 128ea 12RT-300-120 1.5ml Centrifuge tube-capacity : 120ea 12RT-300-180 1.5ml Centrifuge tube-capacity : 180ea 12RT-300-240 1.5ml Centrifuge tube-capacity : 240ea 12RK-HAG Rocking Platform(W285 D195 H65, tilt angle : 7 ) Other Accessories Silicon cap Bottle 12RK-HAG PO-4 PO-4 Mount knobs for attaching one or two disks to the unit 29
gel eluter EXELUTOR Economical & quickest equipment with the best yield. 95% elution within 4minutes. (DNA, RNA, PROTEIN) Sturdy, small and easy to handle. 6 different samples can be applied simultaneously. 0.2~0.5ml of buffer is sufficient for elution. PAK6 How to Use 1 Lift up the top plate and fix it up by the stopping knob. 2 Place the disposable parafilm under the electronic ring. 3 Place a gel slice on the center of the electronic ring. 4 Lift the top plate down. 5 The Electrode should be touched on the gel slice. 6 Pull the buffer out inside the electronic ring enough to cover the gel slice. 7 Confirm the switch and the lamp off. 8 Control the voltage in the between 20V~40V on power supply. If the voltage is over 50V. The lamp and elec-trode could defected. 9 Turn on the switch. 10 Come out small bubbles from gel slice. 11 Using UV lamp. The DNA coming out from gel slice could be seen. 12 After 2~4min. Turn out the switch. 13 Lift the top plate. 14 Absorbing the buffer by a pipet. Model PAK6 Applicable Sample ds DNA, ss RNA, Protein Electro-rod & Eletro-Ring Platinum Dimensions (mm) W290 D135 H150 Unit PAK6 PT-Ring 1.8kg EXELUTOR/capacity-6 samples PT-Rod It is possible to purify samples within an hour. You can apply agarose and polyacrylamide gel slices including nucleic acide or protein on the EXELUTOR Pak6 and apply at 25~35V for 2~5min. In case of incomplete elution, a second attempt can be made by replacing the buffers. The Elution time is flexible according to the kinds and sizes of samples and in case of linear DNA, 4min is sufficient for the size up to 10kb. Eluted DNA can be extracted with phenol / chloroform once and then ethanolpreciitated according to the routine methods. High yield of more than 90%. Since disposable parafilm is used for the sample plate, you don t have to worry about contamination. 0.2~0.5ml of buffer is sufficent for elution. There is nearly no trouble. It is easy to handle. 30
magnetic STIRRER Low profile - High performance Multi-position magnetic stirrers, without heating High quality permanent DC brushless motor for quiet and powerful stirring Variable speed control form 0 to 1,300rpm Stainless steel top plate for the protection against the penetration of liquids Stable low profile body for convenient and safe experiment ST10 ST5 Model ST5 ST10 Speed Range 0 ~ 1300rpm Distance Between Stirring Point 90mm Capacity One point Maximum - 2L 250ml - 5ea 250ml - 10ea Material Plate : Stainless steel 3kg 5kg Dimensions (mm) W114 D564 H63 W197 D564 H63 15W 30W AC 110 / 220V / 230V, 50/60Hz Unit ST5, 110V ST5, 220V ST5, 230V ST10, 110V ST10, 220V ST10, 230V 5 point magnetic stirrer 5 point magnetic stirrer 5 point magnetic stirrer CE cert. 10 point magnetic stirrer 10 point magnetic stirrer 10 point magnetic stirrer CE cert. 31
Heat Sealer SK-series fits nearly everywhere for world-wide use in laboratory. Polyethylene, polypropylene films can be easily sealed. Easy to handle with convenient and reasonable structure. ful transformer and high quality circuit components guarantee years operation. SK310 SK210 Model SK210 SK310 Available Resin polyethylene, polypropylene Sealing Width 2mm Sealing Length 200mm(7.9 ) 300mm(11.8 ) 3.4kg 5kg Dimensions (mm) W320 D85 H160 W440 D85 H175 380W 390W AC 110V / 220V, 50/60Hz Teflon cloth Unit SK210, 110V SK210, 220V SK310, 110V SK310, 220V Sealing width : 200mm Sealing width : 200mm CEcert. Sealing width : 300mm Sealing width : 300mm CEcert. Heating element 32
FINEPCR have been working by triangle organization for develop, manufacturing, marketing and sales companies. Each companies specialize in their own work and support each other very closely. Therefore, We are very flexible and solve the customer`s demand without delay. WWW.FINEPCR.COM