Sizes: 3, 4, 5, 6 ADJUSTABLE LED/HALOGEN HOUSING AIRTIGHT NEW CONSTRUCTION (IC/NON-IC)

Similar documents
Reflectors are compatible with respective Marquise II series housings manufactured by Nora Lighting.

HR-led418-n Invisible Trim

2000 LUMENS A3-LED. Submittal form is Tel: Fax:

NRM-411 / NRM-412 / NRM-413 / NRM-418 4" Marquise I Reflectors

Reflectors are compatible with respective Marquise I series housings manufactured by Nora Lighting.

NRM2-511 / NRM2-512 / NRM2-518

HALO H99ICT. 4" RECESSED DOWNLIGHTING Incandescent

NRM-511 / NRM-512 / NRM-518

HALO H1499T. 4" RECESSED DOWNLIGHTING Incandescent

HALO H5RICAT. 5" RECESSED DOWNLIGHTING Incandescent

NIOB-2 2" BWF IOLITE TRIMS

SHALLOW RECESSED & SURFACE MOUNT LED LIGHTING

LED Lamp. Halogen Lamp

HALO H7T. 6" RECESSED DOWNLIGHTING Incandescent

3" LED SPECIFICATIONS ULTRA SHALLOW FIXED DOWNLIGHT

NIO-4RTL / NIO-4STL 4" Iolite Trimless Reflectors (New Construction only)

DHFR Recessed Vertical Fluorescent Downlight General Remodel 4, 5, 6 Aperture

Open reflector, wide flange 6O1 White 65 BR30 75 PAR30. Polycarbonate lens (shower/closet) Flush 6LF1 Opal 1 6LF2 Prismatic 1

id + 4.5" Downlight mm Trim ChromaSure: Color consistency resulting in a 2-step MacAdam ellipse across the entire ID+ product line.

Catalog # Project. Comments. Prepared by

Project. Comments. Prepared by

Product highlights. Retrofit only E26 adaptor Indoor / outdoor applications 90+ CRI. 2 installation options Surface mount

LCD4 4 LED Commercial Downlight

LCD8 8 LED Commercial Downlight

LCD6 6 LED Commercial Downlight

HALO H7ICAT. 6" RECESSED DOWNLIGHTING Incandescent

Project. Comments. Prepared by

id + 4.5" x 4.5" Downlight mm Trim ChromaSure: Color consistency resulting in a 2-step MacAdam ellipse across the entire ID+ product line.

Catalog # Project. Comments. Prepared by

Line Voltage. 8" and 7" Architectural Incandescent 6" Line Voltage 5" Line Voltage 4" Line Voltage 3" GU10 Line Voltage.

SURFACE FLUSH FLUSH 5 1 / / /4 2 1 /16

Remodeler. Complete product = Frame-in kit + Light engine + Trim Order each separately. E ELV dimming 1 120V VA Version A 2 Z V

2000 LUMENS A4-LED. Submittal form is Tel: Fax:

Remodeler. Complete product = Frame-in kit + Adjustable light engine / Trim Order each separately

- Replace existing can lights in new acoustical ceiling tiles in both basement bathrooms (see above for fixture type).

LAD6 6 LED Architectural Downlight

Project: Type: USA/CAN LOUVER FINISH AP91 F - / - -

Downlighting. LyteCaster. Complete product = Frame-in kit + Light engine + Trim Order each separately

LAD8 8 LED Architectural Downlight

SERIES 4SQLBV OPEN Lumen Bridgelux LED Recessed Downlight

LED RECESSED DOWNLIGHT MODULES

LAD4 4 LED Architectural Downlight

4" LED SPECIFICATIONS LOW-PROFILE ADJUSTABLE DOWNLIGHT

Product highlights. Retrofit only E26 adaptor Indoor / outdoor applications. 2 installation options Surface mount

Project. Comments. Prepared by

MEDMASTER DOWNLIGHT Luminaires for Surgical Applications

"Quick Connect" Connectors materials.. Socket. Remodel Clips. Transformer. Support Spring

id + 6" x 6" Downlight mm Trim ChromaSure: Color consistency resulting in a 2-step MacAdam ellipse across the entire ID+ product line.

SERIES 6VLFL2X Lensed LED Downlight Lumen Flex

LAD6R - Remodel 6 LED Architectural Downlight

LAD8R - Remodel 8 LED Architectural Downlight

ID+ 3.5" x 3.5" 60 cut-off reflector. 50 cut-off reflector. Less than 2.64" low profile housing available.

Catalog Number. Notes

Round or Square Type Non-IC Adjustable Housing with Toroidal Transformer for Flangeless Trims E3_L_-HANM_ 1.7

R6NC 6" LED Recessed Downlight: Universal New Construction Housing

HP-2 WW-R. Finelite, Inc Whipple Road Union City, CA / Fax: 510 /

Project. Comments. Prepared by

Round or Square Type Low-Profile Housing with Toroidal Transformer for Flangeless Trims E3_LF-HDSM-WR_ 1.0

800 TO 9000 LUMEN 8 LED SILENT CEILING DOWNLIGHT HYPERBOLIC OPEN APERTURE L8 SERIES

Project. Comments. Prepared by

10 Year LED Warranty

Project. Comments. Prepared by

Downlighting. LyteCaster. Complete product = Frame-in kit + Light engine + Trim Order each separately. 3" Accent round adjustable 800 Lumens

Catalog # Project. Comments. Prepared by

Regressed Optic. Sheetrock. Finelite, Inc Whipple Road Union City, CA (510) Fax: (510)

WARM COLOR DIMMING ARTIST SERIES 21º º º º - N/A 43º - N/A 60º K, 3000K or 3500K*** 3000K-1800K Warm Dim

Catalog Number. Notes

ECO EXT (DIMMABLE)

Downlighting. LyteCaster. Complete product = Frame-in kit + Light engine + Trim Order each separately. 3" Accent round adjustable 800 Lumens

6-1/4. Adjusts from 1/2 min. to 5/8 max. Pan size: 8 1/2 x 12 9/16 SERIES TRIM TYPE ADJUSTMENT LUMENS [1] CRI CCT DISTRIBUTION.

6BPMWHLLED40K90C 6" Led Retro 40K WHT

Downlighting. LyteCaster. Complete product = Frame-in kit + Light engine + Trim Order each separately. 3" Accent square downlight 800 Lumens

Catalog Number. Notes

Project. Type. Notes. C custom UNV universal BI bi-level dimming +NL(#) night light circuit (7) O other (6) +GTD(#) generator transfer device (7)

SURFACE ASYMMETRIC MOUNT. Project. Type. Notes

Heads. track. track heads. R20 Step Cylinder. R30 Step Cylinder. R20 Soft Square. R30 Soft Square. TH204 White TH205 Black TH303 Brushed Nickel

SERIES 4LBV-NF Flush Mount Lumen Bridgelux LED Lensed Downlight

RECESSED T-Bar & Drywall. Project. Type. Notes 23 15/16" 23 7/8" SIDE VIEW. culus Listed Type I.C.

RESIDENTIAL GRADE

2-524-TLW Wood Trimless Fixed Camber BRO

DRD1 Surface Mount or Recessed LED Downlight General New Construction 4, 5, 6 Aperture

Why Choose Twice Bright Lighting?

MULTIPLES SPECIFICATIONS 1 X 1 OPEN

Output (nominal lumens) 700 lm, 1000 lm, 1300 lm, 2000 lm, 3000 lm, 4000 lm, 5000 lm. Color and color temperature

Catalog # Project. Comments. Prepared by

BEAM SPREAD NR = Narrow (36 degree) WD = Wide (56 degree) WW 2 = Wall Wash. REFLECTOR FINISH SD = Semi- Diffused

1 Eco-Downlight IC Air-Tight Adjustable New Construction Housing Round or Square

RECESSED ASYMMETRIC MOUNT. Project. Type. Notes TECHZONE TM AND LOGIX TM COMPATIBLE

Stepdown Transformer, 277V to 120V, 300VA. 3.5 IN Length 5.75 IN Width IN Height

Catalog Number. Notes. Type 4" (10.2) 3.2" (8.1)

6DS 6 Downlight Square

LB4R / 30K Economy Line 4" Super Thin Recessed LED Soft White 11W

621 Recessed LED Downlight - 6

LED LIGHTING SECOND EDITION. Illuminating the future. Recessed. Recessed Retrofit. Lightbars. Under Cabinet. Tape Light. Step Lights. Track.

P15 - P44: 5-3/4 P62: 6-1/2. SCA Sloped ceiling TrimLock K K K K TW Tunable white (80 CRI, 2700K 5000K) 65 Open

4DS 4.5 Downlight Square

DRD3 Adjustable Recessed LED Downlight General New Construction 4, 5, 6 Aperture

Low Profile T-Bar Power Supply Box shown. ELECTRICAL BOX OPTIONS Mounting options for new and retrofit installations. See page 2 for more information.

622 Recessed LED Wallwash - 4

BYOM ELEMENT SPECIFICATIONS BUILD-YOUR-OWN MULTIPLES

Transcription:

ADJUSTABLE LED/HALOGEN HOUSING AIRTIGHT NEW CONSTRUCTION (IC/NON-IC) Sizes: 3, 4, 5, 6 Line voltage new construction airtight housing designed for IC and NON-IC rated ceilings. Accommodates a wide range of Halogen & LED lamps. Sizes: 3 to 6 inches. 3 GU-10 NON-IC 120V 3 GU-10 IC-RATED 120V 4 LED IC-RATED 8W GU10 4 LED NON-IC SHALLOW GU10 5 IC-RATED PAR30 5 NON-IC LINE VOLT 6 IC/NON-IC AIRTIGHT

ADJUSTABLE LED/HALOGEN HOUSING 3 AIRTIGHT NEW CONSTRUCTION (NON-IC) 3 Line Voltage Airtight Adjustable Housing for NON-IC rated ceilings. Accommodates up to 50W GU-10 Halogen & LED lamps. New applications. Low 4 1/6 profile for shallow ceilings. Pre-wired.037 steel housing adjusts up to 1 3/4 ceiling thickness. Trim is secured with torsion wing springs/standard coil springs. Designed to be installed in new applications. Non IC rated housing must be kept 3 from insulation. room into plenums in compliance to the WSEC - WA 155mm[6"] Supplied with (2) 24 adjustable bar hangers. Bar hangers equipped with (nail-less installation) 3/4 serrated barbed studs for secure mounting in wood joists. 211mm[8 1/2"] 305mm-610mm[12"-24"] Pre-wired, galvanized steel J-box with (4) knockouts. Strain clamps and ground wire. Equipped with safety standard thermal protector rated for 90 C. 88mm[3 1/2"] 115mm[4 1/2"] SKU SASH3-NONIC Bulb Watts 50 Size 3 Max Wattage 50 Material Metal Carton Quantity (PCS) 6 Finish White Rating Non-IC Color White UL NO Width 5.5 ETL YES Height 4 Airtight YES Length 13.75 Bulb Type GU10/GU10LED

ADJUSTABLE LED/HALOGEN HOUSING 3 AIRTIGHT NEW CONSTRUCTION (IC-RATED) 3 Line Voltage Airtight Adjustable Housing for IC rated ceilings. Accommodates up to 35W GU-10 Halogen & LED lamps. New applications. Low 7 3/8 profile for shallow ceilings. Pre-wired.037 steel housing adjusts up to 1-3/4 ceiling thickness. Trim is secured with torsion wing springs/standard coil springs. Designed to be installed in new applications. IC rated housing may have direct contact with insulation. room into plenums in compliance to the WSEC WA Supplied with (2) 24 adjustable bar hangers. Bar hangers equipped with (nail-less installation) 3/4 serrated barbed studs for secure mounting in wood joists. 250mm[10"] 325mm[13"] 200mm[8"] Pre-wired, galvanized steel J-box with (4) knockouts. Strain clamps and ground wire. Equipped with safety standard thermal protector rated for 90 C. 200mm[8"] 76mm[3"] 84mm[3 1/2"] SKU SASH3-IC Bulb Watts 50 Size 3 Max Wattage 50 Material Metal Carton Quantity (PCS) 4 Bulb Type GU10/GU10LED Rating IC-RATED Length 13.75 UL NO Width 8 ETL YES Height 8 Airtight YES

4 AIRTIGHT NEW CONSTRUCTION (IC-RATED) 4 Line Voltage Airtight Adjustable Housing for IC rated ceilings. Accommodates up to 8W GU-10 Halogen & LED lamps. New applications. Low 5 1/2 profile for shallow ceilings. Pre-wired.037 steel housing adjusts up to 1-3/4 ceiling thickness. Trim is secured with torsion springs or standard coil springs. Designed to be installed in existing sheet rock ceilings via ceiling cut out (above ceiling access is not required). The IC-rated housing is designed for having direct contact with insulation. room into plenums in compliance to the WSEC - WA Supplied with (2) 24 adjustable bar hangers, equipped with (nail-less installation) 3/4 serrated barbed studs for secure mounting in wood joists. Pre-wired, galvanized steel J-box with (4) knockouts. Strain clamps and ground wire. Equipped with safety standard thermal protector rated for 90 C. 200mm[8"] 102mm[4"] 135mm[5 1/2"] 138mm[5 1/2"] SKU SASH4-IC Bulb Watts 8 Size 4 Max Wattage 9.8 Material Metal Carton Quantity (PCS) 6 Finish Aluminum Rating IC-RATED Color n/a UL NO Width 8.27 ETL YES Height 5.5 Airtight YES Length 14.18 Bulb Type GU10LED

4 AIRTIGHT NEW CONSTRUCTION (NON-IC) 4 Line Voltage Airtight Shallow Housing for new construction, NON-IC rated ceilings. For up to 50W GU-10 lamp, 18W LED GU10 (120V). Die-formed iron for maximum heat dissipation & rust protection. Intended for New Construction installation. Suitable for using in non-insulation covered ceilings. Housing can be installed in 1/2 to 1-3/8 thick ceilings. Non-IC rated housing must be kept 3 from insulation. Listed for through branch wiring 4 in/4 out J-box. Designed for straight through conduit runs 1/2 and 3/4 romex wiring knockouts. Pre-wired junction box provided with removable access plate. Knockouts equipped with pry out slots. All leads are #18AWG wire, ground wire is connected to the bottom, quick connectors supplied on all leads. ETL listed for damp locations with feed through. BULB & SOCKET: GU10 Base CRI>80% PF>0.9 Color Temperature: 2700K-6500K SKU SASH4-NONIC Bulb Watts 50/18(LED) Size 4 Max Wattage 50/18(LED) Material Metal Carton Quantity (PCS) 6 Finish Iron Rating Non-IC Color n/a UL NO Width 8.46 ETL YES Height 5.51 Airtight YES Length 14.21 Bulb Type GU10/GU10 LED

5 AIRTIGHT NEW CONSTRUCTION (IC-RATED) 5 120V Line Voltage Adjustable Airtight Housing for IC-Rated ceilings. Accommodates up to 75W PAR30/BR30, 18W PAR30 LED and A19 bulbs. Pre-wired.042 aluminum housing adjusts up to 1-3/4 ceiling thickness. Trim is secured with torsion wing springs/standard coil springs. IC rated housing may have direct contact with insulation. room into plenums in compliance to the WSEC - WA Supplied with (2) 24 adjustable bar hangers with 900 repositioning ability. Bar hangers equipped with (nailless installation) 3/4 serrated barbed studs for secure mounting in wooden joists. Brackets may be flattened out to accommodate 27 flat bar hangers. Earthquake structural cable compatible for drop panel ceilings or any other mounting that requires direct support from structural ceilings. 305mm-610mm [12"-24"] 266mm [10 1/2"] Pre-wired, galvanized steel J-box (25 cubic-inch) with (4) 1/2, (3) 3/4, and (4) Romex knock-outs. Comes with WAGO connectors. Strain clamps and ground wire. Die-cast aluminum fitting. Equipped with safety standard thermal protector rated for 90ºC. 140mm [5 1/2"] SKU SASH5-IC Bulb Watts 75W/18W (LED) Size 5 Max Wattage 75W/18W (LED) Material Iron/Aluminum Carton Quantity (PCS) 6 Finish Aluminum Rating IC-RATED ROHS compliant YES UL NO Width 12.25 ETL YES Height 7.25 Airtight YES Length 13.75 Bulb Type PAR30/R30/PAR30LED

5 AIRTIGHT NEW CONSTRUCTION (NON-IC) 5 Line Voltage Airtight Housing intended for new construction, NON-IC rated. For 120V up to 75W PAR30/BR30; 150W PAR38/BR40 bulb, LED 18W Max. Die-formed iron for maximum heat dissipation & rust protection. Intended for New Construction installation. Suitable for using in non-insulation covered ceilings. Housing can be installed in 1/2 to 1-3/8 thick ceilings. Non-IC rated housing must be kept 3 from insulation. HANGER BAR: Allow housing to be positioned and locked at any point within a 24 joist span. Can be shortened for 12 joists. Can be positioned on long or short axis of the housing. Contains integral nail. Hanger fits onto T-bar spline for quick alignment. Listed for through branch wiring 4 in/4 out J-box. Designed for straight through conduit runs 1/2 and 3/4 romex wiring knockouts. Pre-wired junction box provided with removable access plate. Knockouts equipped with pry out slots. All leads are #18AWG wire, ground wire is connected to the bottom, quick connectors supplied on all leads. ETL listed for damp locations with feed through. BULB & SOCKET: PAR20/R20/PAR30/R40 PAR20/PAR30 LED LED 18W max. E26 Medium Base CRI>80% PF>0.9 Color Temp: 2700K-6500K SKU SASH5-NONIC Length 13.75 Size 5 Max Wattage 100W/18W (LED) Material Iron/Aluminum Carton Quantity (PCS) 6 Finish Aluminum Rating Non-IC ROHS compliant YES UL NO Width 12.25 ETL YES Height 7.25 Airtight YES

6 AIRTIGHT NEW CONSTRUCTION (NON-IC) 6 Line Voltage Airtight Housing intended for new construction, NON-IC rated. For 120V up to 150W PAR38/BR40 bulb, A19 & 18W LED. Pre-wired. 042 aluminum housing adjusts up to 1-3/4 ceiling thickness. The trim is secured with torsion wing springs/standard coil springs. NON-IC rated housing may have direct contact with insulation. Supplied with (2) 24 adjustable bar hangers with 900 repositioning ability. Bar hangers equipped with (nailless installation) 3/4 serrated barbed studs for secure mounting in wooden joists. Brackets may be flattened out to accommodate 27 flat bar hangers. Earthquake structural cable compatible for drop panel ceilings or any other mounting that requires direct support from structural ceilings. Pre-wired, galvanized steel J-box (25 cubic-inch) with (4) 1/2, (3) 3/4, and (4) romex knock-outs. Comes with all WAGO connectors, strain clamps and ground wire. Equipped with safety standard thermal protector rated for 75ºC. ETL/CETL-Listed (ETL listed number: 4005878) ETL listed for through-branch wiring (8) No. 12 AWG 90ºC 305mm-610mm [12"-24"] 240mm [9 1/2"] 160mm [6 1/2"] SKU SASH6-NONIC Length 13.75 Size 6 Max Wattage 150W/18W (LED) Material Iron Carton Quantity (PCS) 6 Finish Aluminum Rating Non-IC ROHS compliant YES UL NO Width 12.25 ETL YES Height 7.25 Airtight YES Lamp Types Supported 150W PAR38/R40/BR40, 18W PAR38LED, A-19

6 AIRTIGHT NEW CONSTRUCTION (IC-RATED) 6 120V Line Volt Adjustable Airtight Housing for IC-Rated ceilings. Intended for use with up to 75W PAR30/R30, 18W PAR30/PAR38 LED & A19. Pre-wired.042 aluminum housing adjusts up to 1-3/4 ceiling thickness. The trim is secured with torsion wing springs/standard coil springs. IC rated housing may have direct contact with insulation. room into plenums in compliance to the WSEC - WA Supplied with (2) 24 adjustable bar hangers with 900 repositioning ability. Bar hangers equipped with (nailless installation) 3/4 serrated barbed studs for secure mounting in wooden joists. Brackets may be flattened out to accommodate 27 flat bar hangers. Earthquake structural cable compatible for drop panel ceilings or any other mounting that requires direct support from structural ceilings. 305mm-610mm [12"-24"] 240mm [9 1/2"] Pre-wired, galvanized steel J-box (25 cubic-inch) with (4) 1/2, (3) 3/4, and (4) Romex knock-outs. Comes with WAGO connectors. Strain clamps and ground wire. Die-cast aluminum fitting. Equipped with safety standard thermal protector rated for 90ºC. 160mm [6 1/2"] SKU SASH6-IC Length 13.75 Size 6 Max Wattage 150W/18W (LED) Material Iron Carton Quantity (PCS) 6 Finish Aluminum Rating IC-Rated ROHS compliant YES UL NO Width 12.25 ETL YES Height 7.25 Airtight YES Lamp Types Supported 75W PAR30/R30; 18W PAR30/PAR38 LED & A19