CLASSROOM TABLES: QUATTRO SERIES TABLES QUATTRO COMPUTER TABLE In classrooms and computer labs, height-adjustable Quattro Computer Tables make the use and management of computer technology easy. Quattro Computer Tables are great for multi-purpose rooms and can be used for nearly any type of computer classroom application. Durable: Features a scratch resistant 1" thick tabletop. The tabletop and steel base are also reinforced to hold heavy equipment. All Quattro tables meet ANSI/BIFMA x5.5-2008 safety and quality standards. Stable: Glides complement steel base in preventing tip over. Perfect for stationary installations. Adjustable: Height-adjustable in one inch increments from 24" to 32" to support your specific needs. Cord Friendly: J-channel cord management bin, which doubles as a modesty panel, and grommets in tabletop organize wires when in use or stored. Power Ready: Optional Fluid down power system features a UL recognized 4-outlet power module and allows up to four tables to daisy chain off of a single wall outlet. ADA Compliant: All Quattro tables meet ADA requirements. Quattro Computer Table has achieved GREENGUARD GOLD Certification. SPECIFICATION INFORMATION 4-LEG TABLE BASE Telescoping legs are constructed from 1-1/4" 12-gauge steel and 1" 14-gauge steel tubing and attach to the top using a unique hex/tie bolt assembly. Legs are adjustable from 24" to 32" in height. Base comes standard with 1" adjustable leveling glides. 3" twin-wheel casters available as an accessory. TABLE WORK SURFACE Work surface is constructed from 1" thick 45 lb. density laminate particle board. Table top incorporates a 14-gauge steel apron around the table edge for maximum strength and durability. Each 4-leg table comes standard with grommet holes. 36"w and 48"w 4-leg tables have one center grommet. 60"w and 72"w units have two grommets. 84"w units have three grommets. Tables come with a 3mm thermoplastic elastomer (TPE) t-mold (edge detail 01). CORD MANAGEMENT BIN Cord management bin runs the width of the table, is constructed of 18-gauge steel, and is secured to the table apron and leg with (2) 10-32 screws. Each cord bin includes two 1/4" diameter holes, spaced 16-3/4" on center which support a panel mounted electrical unit. WORK SURFACE EDGE DETAIL 01 Tables with edge detail 01 have a 3mm thermoplastic elastomer (TPE) t-mold edge band, which runs the entire perimeter of the work surface. POWER COMPONENTS Tables have the option of adding the Fluid down power system or 6-outlet power strip. Power components are sold separately. Not For Use With GFCI Outlets - To avoid tripping of electrical circuits, only use daisy chain Fluid power components with non-gfci (Ground Fault Circuit Interrupter) outlets. FINISH OPTIONS Tables are offered in the following finish combinations: Grey mist (GM) powder paint Grey mist (GM) Available in cardinal (GMC), topaz (GMT), polo (GML) and quartz (GMQ). or; Black powder paint Wild cherry (CY) Available in black (CY) Tables may be ordered in any standard laminate, trim and powder paint offered by Bretford for an upcharge. RECYCLED CONTENT All steel components are constructed using prime steel that is comprised of a minimal 25% to 35% post-consumer recycled material and finished in environmentally friendly powder paint. All steel components are completely recyclable at the end of the product life cycle. Work surfaces with HPL have an MDF substrate constructed with an average of 70% recycled content. CONSTRUCTION AND ENVIRONMENTAL TESTING Using in-house or third party verification, many Bretford products are tested to meet or exceed the appropriate ANSI/BIFMA x5.5-2008 standards for durability and safety. Quattro Computer Table has achieved GREENGUARD GOLD Certification. TPE is non-toxic, additive and phthalate free, and recyclable at the end of the product life cycle. In landfill conditions TPE will break down, releasing only water and biodegradable components. TPE is a highly flexible material that consumes less energy during manufacturing and is preferable to polyvinyl chloride (PVC). PVC is constructed with chlorine and when burned omits toxic by-products such as dioxins, chlorocarbons, and hydrochloric acid. Additionally, PVC is constructed using a significant amount of lead, which is highly toxic during the product life cycle and after disposal. 158 800.521.9614 BRETFORD.COM
BASICS PRICING DISCOUNT CLASSROOM TABLES: QUATTRO SERIES TABLES QUATTRO COMPUTER TABLE Quattro Computer Table with Glides Model # W x D x H ADA Compliant Wt Grommet Hole(s) List Price TABLES Tables are available in the following finish options: grey mist/cardinal (GMC), grey mist/topaz (GMT), grey mist/polo (GML), grey/mist/quartz (GMQ) and wild cherry/black (CY) Tables may be ordered in any standard laminate, trim and powder paint offered by Bretford for an upcharge QWTCP2436 36" x 24" x 24-32" Yes 65 lbs 1 $629 QWTCP2448 48" x 24" x 24-32" Yes 78 lbs 2 $680 QWTCP2460 60" x 24" x 24-32" Yes 92 lbs 2 $711 QWTCP2472 72" x 24" x 24-32" Yes 111 lbs 2 $770 QWTCP2484 84" x 24" x 24-32" Yes 116 lbs 3 $795 QWTCP3036 36" x 30" x 24-32" Yes 73 lbs 1 $647 QWTCP3048 48" x 30" x 24-32" Yes 89 lbs 2 $701 QWTCP3060 60" x 30" x 24-32" Yes 105 lbs 2 $731 QWTCP3072 72" x 30" x 24-32" Yes 121 lbs 2 $797 QWTCP3084 84" x 30" x 24-32" Yes 135 lbs 3 $821 24"D 30"D How to Order a Quattro Computer Table: Example: 48" x 30" Table; Grey Mist Paint; Grey Mist Laminate; Quartz Trim. * NOTE: Tables may be ordered in any standard laminate, trim and powder paint offered by Bretford for an upcharge. How to Order a Quattro Computer Table: Example: 48" x 30" Table; Black Paint; Wild Cherry Laminate; Black Trim. * NOTE: Tables may be ordered in any standard laminate, trim and powder paint offered by Bretford for an upcharge. QWTCP3048 - GM - Q QWTCP3048 - CY MODEL NUMBER MODEL NUMBER / 159
CLASSROOM TABLES: QUATTRO SERIES TABLES QUATTRO VOLTEA TABLE The height-adjustable Quattro Voltea Table features a rear flip-up door that provides easy access to the cord management bin and locks with a key when in the down position. Ideal for use with flat screen monitors. Durable: Features a sturdy 1" thick tabletop with steel skirt. Together with the reinforced steel base, this provide a sturdy work surface for the heaviest of equipment. All Quattro tables meet ANSI/BIFMA x5.5-2008 safety and quality standards. Stable: Glides complement steel base in preventing tip over. Perfect for stationary installations. Adjustable: Height-adjustable in one inch increments from 24" to 32" to support your specific needs. Cord Friendly: Rear cord bin door flips up for easy access to power and data. Cord bin door has cut outs to allow computer cables to easily pass into the cord bin without pinching. Secure: When in the down position, rear cord bin door can be key-locked for added security. Power Ready: Optional Fluid down power system features a UL recognized 4-outlet power module and allows up to four tables to daisy chain off of a single wall outlet. ADA Compliant: All Quattro tables meet ADA requirements. Quattro Voltea Table has achieved GREENGUARD GOLD Certification. SPECIFICATION INFORMATION 4-LEG TABLE BASE Telescoping legs are constructed from 1-1/4" 12-gauge steel and 1" 14-gauge steel tubing and attach to the top using a unique hex/tie bolt assembly. Legs are adjustable from 24" to 32" in height. Base comes standard with 1" adjustable leveling glides. 3" twin-wheel casters available as an accessory. TABLE WORK SURFACE Work surface, including cord bin door, is constructed from 1" thick 45 lb. density laminate particle board. The flip up door includes cut-outs to let power and data cables pass into the cord bin and a lock with two keys. Note that all Quattro Voltea tables use the same key to secure the rear flip up door. Table top incorporates a 14-gauge steel apron around the table edge for maximum strength and durability. Tables come with a 3mm thermoplastic elastomer (TPE) t-mold (edge detail 01). CORD MANAGEMENT BIN Cord management bin runs the width of the table, is constructed of 18-gauge steel, and is secured to the table apron and leg with (2) 10-32 screws. Each cord bin includes two 1/4" diameter holes, spaced 16-3/4" on center which support a panel mounted electrical unit. WORK SURFACE EDGE DETAIL 01 Tables with edge detail 01 have a 3mm thermoplastic elastomer (TPE) t-mold edge band, which runs the entire perimeter of the work surface. POWER COMPONENTS Tables have the option of adding the Fluid down power system or 6-outlet power strip. Power components are sold separately. Not For Use With GFCI Outlets - To avoid tripping of electrical circuits, only use daisy chain Fluid power components with non-gfci (Ground Fault Circuit Interrupter) outlets. FINISH OPTIONS Tables are offered in the following finish combinations: Grey mist (GM) powder paint Grey mist (GM) Available in cardinal (GMC), topaz (GMT), polo (GML) and quartz (GMQ). or; Black powder paint Wild cherry (CY) Available in black (CY) RECYCLED CONTENT All steel components are constructed using prime steel that is comprised of a minimal 25% to 35% post-consumer recycled material and finished in environmentally friendly powder paint. All steel components are completely recyclable at the end of the product life cycle. Work surfaces with HPL have an MDF substrate constructed with an average of 70% recycled content. CONSTRUCTION AND ENVIRONMENTAL TESTING Using in-house or third party verification, many Bretford products are tested to meet or exceed the appropriate ANSI/BIFMA x5.5-2008 standards for durability and safety. Quattro Voltea Table has achieved GREENGUARD GOLD Certification. TPE is non-toxic, additive and phthalate free, and recyclable at the end of the product life cycle. In landfill conditions TPE will break down, releasing only water and biodegradable components. TPE is a highly flexible material that consumes less energy during manufacturing and is preferable to polyvinyl chloride (PVC). PVC is constructed with chlorine and when burned omits toxic by-products such as dioxins, chlorocarbons, and hydrochloric acid. Additionally, PVC is constructed using a significant amount of lead, which is highly toxic during the product life cycle and after disposal. Tables may be ordered in any standard laminate, trim and powder paint offered by Bretford for an upcharge. 160 800.521.9614 BRETFORD.COM
BASICS PRICING DISCOUNT CLASSROOM TABLES: QUATTRO SERIES TABLES QUATTRO VOLTEA TABLE Quattro Voltea Table with Glides Model # W x D x H ADA Compliant Wt Grommet Cutout List Price TABLES Tables are available in the following finish options: grey mist/cardinal (GMC), grey mist/topaz (GMT), grey mist/polo (GML), grey/mist/quartz (GMQ) and wild cherry/black (CY) Tables may be ordered in any standard laminate, trim and powder paint offered by Bretford for an upcharge QFT2436 36" x 24" x 24-32" Yes 65 lbs 1 $627 QFT2448 48" x 24" x 24-32" Yes 81 lbs 2 $701 QFT2460 60" x 24" x 24-32" Yes 92 lbs 2 $794 QFT2472 72" x 24" x 24-32" Yes 105 lbs 2 $887 QFT2484 84" x 24" x 24-32" Yes 118 lbs 3 $989 QFT3036 36" x 30" x 24-32" Yes 73 lbs 1 $685 QFT3048 48" x 30" x 24-32" Yes 92 lbs 2 $774 QFT3060 60" x 30" x 24-32" Yes 105 lbs 2 $886 QFT3072 72" x 30" x 24-32" Yes 121 lbs 2 $999 QFT3084 84" x 30" x 24-32" Yes 137 lbs 3 $1,115 24"D 30"D How to Order a Quattro Voltea Table: Example: 72" x 30" Table; Grey Mist Paint; Grey Mist Laminate; Quartz Trim. * NOTE: Tables may be ordered in any standard laminate, trim and powder paint offered by Bretford for an upcharge. How to Order a Quattro Voltea Table: Example: 72" x 30" Table; Black Paint; Wild Cherry Laminate; Black Trim. * NOTE: Tables may be ordered in any standard laminate, trim and powder paint offered by Bretford for an upcharge. QFT2436 - GM - Q QFT2436 - CY MODEL NUMBER MODEL NUMBER / 161
CLASSROOM TABLES: QUATTRO SERIES TABLES QUATTRO SCALE-UP TABLE SCALE-UP stands for Student-Centered Active Learning Environment for Undergraduate Programs. Classrooms are redesigned to accommodate up to 100 students and encourage interactions between teams of students. A decade of research has proven significant improvements in learning with this concept. The basic idea is that you give students something interesting to investigate. While they work in teams, the instructor is free to roam around the classroom asking questions, sending one team to help another, or asking why someone else got a different answer. Groups are carefully structured to give them many opportunities to interact. Students problem solving has improved, their conceptual understanding has increased, attitudes are better and failure rates have drastically decreased. Accomodating: 84" circular tables fit the preferred sizes specified by the SCALE-UP teaching model. Adjustable: Work surface is adjustable in one inch increments from 24" to 32" high. Tables come with adjustable floor glides. Sturdy: 1" thick laminate top with steel skirt and 8-legged cross base provide a sturdy work surface for the heaviest of equipment. Stable: Reinforced leg design is constructed from 12- and 14-gauge steel providing superior strength. Powered: 16" shelf attached 12" below center of the table to secure power strip and/or data switch; Optional 12-unit electrical unit can be set on lower shelf to power laptops and peripherals and 3" grommet hole in center of table allows user to run power and data down to power/data unit on lower shelf. Quattro Scale-Up Table has achieved GREENGUARD GOLD Certification. SPECIFICATION INFORMATION TABLE BASE Telescoping legs are constructed from 1-1/4" 12-gauge steel and 1" 14-gauge steel tubing and attach to the top using a unique hex/tie bolt assembly. Legs are adjustable from 24" to 32" in height. Base comes standard with 1" adjustable leveling glides only. TABLE WORK SURFACE The work surface comes in two pieces and is constructed from 1" thick 45 lb. density laminate particle board. Table top incorporates a 14-gauge steel apron around the table edge for maximum strength and durability. Each table comes standard with 3" grommet hole. Tables come with a 3mm thermoplastic elastomer (TPE) t-mold (edge detail 01). WORK SURFACE EDGE DETAIL 01 Tables with edge detail 01 have a 3mm thermoplastic elastomer (TPE) t-mold edge band, which runs the entire perimeter of the work surface. POWER COMPONENTS Tables have the option of adding a 12-outlet power strip. Power components are sold separately. FINISH OPTIONS Tables can be ordered in any standard laminate, trim, and powder paint offered by Bretford. RECYCLED CONTENT All steel components are constructed using prime steel that is comprised of a minimal 25% to 35% post-consumer recycled material and finished in environmentally friendly powder paint. All steel components are completely recyclable at the end of the product life cycle. CONSTRUCTION AND ENVIRONMENTAL TESTING Using in-house or third party verification, many Bretford products are tested to meet or exceed the appropriate ANSI/BIFMA x5.5-2008 standards for durability and safety. TPE is non-toxic, additive and phthalate free, and recyclable at the end of the product life cycle. In landfill conditions TPE will break down, releasing only water and biodegradable components. TPE is a highly flexible material that consumes less energy during manufacturing and is preferable to polyvinyl chloride (PVC). PVC is constructed with chlorine and when burned omits toxic by-products such as dioxins, chlorocarbons, and hydrochloric acid. Additionally, PVC is constructed using a significant amount of lead, which is highly toxic during the product life cycle and after disposal. 162 800.521.9614 BRETFORD.COM
COLLECTIONS PRICING DISCOUNT CLASSROOM TABLES: QUATTRO SERIES TABLES QUATTRO SCALE-UP TABLE Quattro SCALE-UP Table with Glides Model # W x D x H ADA Compliant Wt Grommet Hole(s) List Price TABLES PSU84 84" x 84" x 24-32" No 250 lbs 1 $2,768 Tables may be ordered in any standard laminate, trim and powder paint offered by Bretford How to Order a Quattro Scale-Up Table: Example: 84" Table; Anthracite Paint; Grey Mist Laminate; Quartz Trim. PSU84 - AN - GM - Q MODEL NUMBER PAINT 163