Technical specifications series 1.6-3.5 t worldwide network 24/7 support
STANDARD SPECIFICATIONS CHARACTERISTICS WEIGHTS WHEELS & TIRES DIMENSIONS PERFORMANCE DRIVE OTHERS March 2014 Counterbalance trucks Designation according VDI 3586 Manufacturers Data and Design Characteristics Data sheet for materials handling equipment 1.1 Manufacturer UniCarriers 1.2 Model name LX16 LX25 Model variation AP1F1A16DU AP1F2A25DU 1.3 Power unit Gasoline/LPG Gasoline/LPG 1.4 Operation Sit Sit 1.5 Load capacity Q (t) 1.6 2.5 1.6 Load centre c (mm) 500 500 1.8 Front overhang x (mm) 390 425 1.9 Wheel base y (mm) 1290 1500 2.1 Service weight kg 2660 3525 2.2 Axle load with load, front/rear kg 3715/545 5370/655 2.3 Axle load without load, front/rear kg 1050/1650 1330/2195 3.1 Tyres front/rear (C=Cushion,SE=superelastic, P=Pneumatic) 1 P(SE)/P(SE) 3.2 Tyre size, front 6.00-9-12PR 21x8-9-14PR 3.3 Tyre size, rear 5.00-8-8PR 18x7-8-14PR 3.5 Wheels, number front/rear (x=powered) 2x/2 2x/2 3.6 Tread, front b 10 (mm) 870 975 3.7 Tread, rear b 11 (mm) 885 930 4.1 Tilt /carriage, forward/backward a/b ( ) 5/10 5/10 4.2 Height mast fully lowered h 1 (mm) 1990 1955 4.3 Free lift h 2 (mm) 155 105 4.4 Lift height h 3 (mm) 3000 3000 4.5 Height mast fully extended h 4 (mm) 3945 4045 4.7 Overhead guard height h 6 (mm) 2105 2090 4.8 Seat height/standing height h 7 (mm) 1000 985 4.12 Towing coupler height h 10 (mm) 320 350 4.19 Overall length l 1 (mm) 3210 3425 4.20 Length to fork face l 2 (mm) 2140 2355 4.21 Overall width 1 b 1 (mm) 1035 1175 4.22 Fork dimensions s,e,l (mm) 35x100x1070 40x100x1070 4.23 Carriage DIN 15173, Class / Form A,B 2A 2A 4.24 Carriage width b 3 (mm) 920 1020 4.31 underclearance loaded m 1 (mm) 110 75 4.32 Underclearance centre wheelbase m 2 (mm) 140 130 4.33 Right angle stacking aisle with pallet 1000x1200 across forks Ast (mm) 3440 3655 4.34 Right angle stacking aisle with pallet 800x1200 across forks Ast (mm) 3235 3265 4.35 Turning radius Wa (mm) 1850 2030 4.36 Turning radius, inner b 13 (mm) 75 60 5.1 Travelling speed with/without load km/h 17/17 17/17 5.2 Lifting speed with/without load mm/s 600/630 620/650 5.3 Lowering speed with/without load mm/s 500/500 500/500 5.6 Drawbar pull, with/without load kn 13.3/10.6 16.7/9.7 5.8 Gradeability with/without load % 39/28 27/21 5.9 Acceleration with/without load s 5.1/4.6 5.2/4.5 5.10 Service brake Hydraulic 7.1 Engine manufacturer/type K21 K21 7.2 Engine rated power according ISO 1585 kw 41 41 7.3 Rated engine revolutions min-¹ 2700 2700 7.4 Number of cylinders/displacement cm³ 4/2065 4/2065 7.5 Fuel consumption according VDI cycle (60 cycles/hour) kg 3.0* 4.1* 8.1 Type of drive control Torque converter/1 8.2 Working pressure attachments bar 127 127 8.3 Oil flow attachment I/min 60 68 8.4 Noise level operator s ear according EN 12053 db(a) 77 78 VDI 2198 Registration note *LPG fuel consumption
MAST SPECIFICATIONS & RATED CAPACITIES: LX16: 1.6 TONNE type name Maximum fork height Fully lowered Overall height Fully extended Free lift Tilt angle Forward/ backward Load capacity Load center 500 mm 1.6 tonne mm 1 mm 1 mm 1 mm 1 mm 1 mm 1 degrees kg¹) 2W270 2700 1840 3280 3645 155 155 5-10 1600 2W300 3000 1990 3580 3945 155 155 5-10 1600 WIDE VIEW 2W330 3300 2140 3880 4245 155 155 5-10 1600 2W350 3500 2275 4080 4445 155 155 5-10 1600 2W370 3700 2400 4280 4645 155 155 5-10 1600 2W400 4000 2590 4580 4945 155 155 5-10 1550 2W450 4500 2840 5080 5445 155 155 5-5 1500 2W500 5000 3090 5580 5945 155 155 5-5 1400 2F300 3000 1990 3580 3945 1445 1080 5-10 1600 2F330 3300 2140 3880 4245 1595 1230 5-10 1600 2F350 3500 2275 4080 4445 1730 1365 5-10 1600 2F370 3700 2400 4280 4645 1855 1490 5-10 1600 2F400 4000 2590 4580 4945 2045 1680 5-10 1550 3F385 3850 1840 4430 4795 1295 930 5/5 1550 3F430 4300 1990 4880 5245 1445 1080 5/5 1500 THREE STAGE 3F475 4750 2140 5330 5695 1595 1230 5/5 1400 3F515 5150 2275 5730 6100 1730 1365 5/5 1350 3F550 5500 2400 6080 6445 1855 1490 5/5 1200 3F600 6000 2590 6580 6945 2045 1680 5/5 1050 3F650 6500 2840 7080 7445 2295 1930 5/5 950 3F700 7000 3090 7580 7945 2545 2180 5/5 850 MAST SPECIFICATIONS & RATED CAPACITIES: LX25: 2.5 TONNE type name Maximum fork height Fully lowered Overall height Fully extended Free lift Tilt angle Forward/ backward Load capacity Load center 500 mm 2.5 tonne mm 1 mm 1 mm 1 mm 1 mm 1 mm 1 degrees kg¹) 2W270 2700 1805 3320 3745 105 105 5-10 2500 2W300 3000 1955 3620 4045 105 105 5-10 2500 WIDE VIEW 2W330 3300 2105 3920 4345 105 105 5-10 2500 2W350 3500 2240 4120 4545 105 105 5-10 2500 2W370 3700 2365 4320 4745 105 105 5-10 2500 2W400 4000 2555 4620 5045 105 105 5-10 2500 2W450 4500 2805 5120 5545 105 105 5-5 2350 2W500 5000 3055 5620 6045 105 105 5-5 2250 2F300 3000 1955 3620 4045 1375 950 5-10 2500 2F330 3300 2105 3920 4345 1525 1100 5-10 2500 2F350 3500 2240 4120 4545 1660 1235 5-10 2500 2F370 3700 2365 4320 4745 1785 1360 5-10 2500 2F400 4000 2555 4620 5045 1975 1550 5-10 2450 3F385 3850 1805 4470 4895 1225 800 5-5 2500 3F430 4300 1955 4920 5345 1375 950 5-5 2400 THREE STAGE 3F475 4750 2105 5370 5795 1525 1100 5-5 2200 3F515 5150 2240 5775 6200 1660 1235 5-5 1950 3F550 5500 2365 6120 6545 1785 1360 5-5 1800 3F600 6000 2555 6620 7045 1975 1550 5-5 1550 3F650 6500 2805 7120 7545 2225 1800 5-5 1350 3F700 7000 3055 7620 8045 2475 2050 5-5 1000 1) 1 inch = 25.4 mm 1kg = 0.4536 lb
STANDARD SPECIFICATIONS CHARACTERISTICS WEIGHTS WHEELS & TIRES DIMENSIONS PERFORMANCE DRIVE OTHERS March 2014 Counterbalance trucks Designation according VDI 3586 Manufacturers Data and Design Characteristics Data sheet for materials handling equipment 1.1 Manufacturer UniCarriers 1.2 Model name LX35 Model variation UG1F2A35DU 1.3 Power unit Gasoline/LPG 1.4 Operation Sit 1.5 Load capacity Q (t) 3.5 1.6 Load centre c (mm) 500 1.8 Front overhang x (mm) 485 1.9 Wheel base y (mm) 1700 2.1 Service weight kg 4605 2.2 Axle load with load, front/rear kg 7140/965 2.3 Axle load without load, front/rear kg 1615/2990 3.1 Tyres front/rear (C=Cushion,SE=superelastic, P=Pneumatic) 1 P(SE)/P(SE) 3.2 Tyre size, front 250-15-16PR(l) 3.3 Tyre size, rear 6.50-10-12PR(l) 3.5 Wheels, number front/rear (x=powered) 2x/2 3.6 Tread, front b 10 (mm) 1060 3.7 Tread, rear b 11 (mm) 980 4.1 Tilt /carriage, forward/backward a/b ( ) 6/12 4.2 Height mast fully lowered h 1 (mm) 2185 4.3 Free lift h 2 (mm) 160 4.4 Lift height h 3 (mm) 3000 4.5 Height mast fully extended h 4 (mm) 4140 4.7 Overhead guard height h 6 (mm) 2155 4.8 Seat height/standing height h 7 (mm) 1055 4.12 Towing coupler height h 10 (mm) 420 4.19 Overall length l 1 (mm) 3850 4.20 Length to fork face l 2 (mm) 2780 4.21 Overall width 1 b 1 (mm) 1280 4.22 Fork dimensions s,e,l (mm) 45x122x1070 4.23 Carriage DIN 15173, Class / Form A,B 3A 4.24 Carriage width b 3 (mm) 1020 4.31 underclearance loaded m 1 (mm) 155 4.32 Underclearance centre wheelbase m 2 (mm) 190 4.33 Right angle stacking aisle with pallet 1000x1200 across forks Ast (mm) 4105 4.34 Right angle stacking aisle with pallet 800x1200 across forks Ast (mm) 3905 4.35 Turning radius Wa (mm) 2420 4.36 Turning radius, inner b 13 (mm) 70 5.1 Travelling speed with/without load km/h 19/19 5.2 Lifting speed with/without load mm/s 450/470 5.3 Lowering speed with/without load mm/s 420/360 5.6 Drawbar pull, with/without load kn 17.3/11.8 5.8 Gradeability with/without load % 22/22 5.9 Acceleration with/without load s 5.1/4.2 5.10 Service brake Hydraulic 7.1 Engine manufacturer/type UniCarriers/K25 7.2 Engine rated power according ISO 1585 kw 46.9 7.3 Rated engine revolutions min-¹ 2700 7.4 Number of cylinders/displacement cm³ 4/2488 7.5 Fuel consumption according VDI cycle (60 cycles/hour) kg 6.0* 8.1 Type of drive control Torque converter/1 8.2 Working pressure attachments bar 127 8.3 Oil flow attachment I/min 70 8.4 Noise level operator s ear according EN 12053 db(a) 79 VDI 2198 Registration note *LPG fuel consumption
MAST SPECIFICATIONS & RATED CAPACITIES: LX35: 3.5 TONNE type name Maximum fork height Fully lowered Overall height Fully extended Free lift Tilt angle Forward/ backward Load capacity Load center 500 mm 3.5 tonne mm 1 mm 1 mm 1 mm 1 mm 1 mm 1 degrees kg¹) 2W300 3000 2185 3740 4140 160 160 6/12 3500 WIDE VIEW 2W330 3300 2320 4040 4440 160 160 6/12 3500 2W350 3500 2445 4240 4640 160 160 6/12 3500 2W370 3700 2635 4440 4840 160 160 6/12 3500 2W400 4000 2885 4740 5140 160 160 6/12 3450 2W450 4500 3135 5240 5640 160 160 6/6 3400 2W500 5000 3385 5740 6140 160 160 6/6 3300 2F300 3000 2185 3790 4140 1440 1090 6/12 3500 2F330 3300 2320 4090 4440 1575 1225 6/12 3500 2F350 3500 2445 4290 4640 1700 1350 6/12 3500 2F370 3700 2635 4490 4840 1890 1540 6/12 3500 2F400 4000 2885 4790 5140 2140 1790 6/12 3450 3F385 3850 2035 4670 4990 1260 940 6/6 3500 3F430 4300 2185 5120 5440 1410 1090 6/6 3450 THREE STAGE 3F475 4750 2320 5570 5890 1545 1225 6/6 3400 3F515 5150 2445 5975 6295 1670 1350 6/6 3250* 3F550 5500 2635 6320 6640 1860 1540 6/6 3200* 3F600 6000 2885 6820 7140 2110 1790 6/6 3100* 3F650 6500 3135 7320 7640 2360 2040 6/6 2500* 3F700 7000 3385 7820 8140 2610 2290 6/6 2200* 1) 1 inch = 25.4 mm 1kg = 0.4536 lb *Load capacity with double tires. Overall truck width: 1720 mm
It s all about the price. But what price? Reduce your Total Cost of Operation with UniCarriers We agree. Price is everything. Or to be more specific: your Total Cost of Operation (TCO). That s why we re so focused on cutting costs and improving your material handling. The truck and its performance play an important role, but this is even more about how we can support you in optimising your warehouse operations to give you the best value for your money. Which in the long run is what creates a winner. UNICARRIERS CORPORATION U-LX-35.S.EN/UCE-2015-10 UniCarriers Corporation reserves the right to make any changes without notice concerning colours, equipment or specifications detailed in this brochure, or to discontinue individual models. The colours of vehicles delivered may differ slightly from those in this brochure. The specifications vary for different countries depending on local market conditions. Please consult your local dealer to ensure that the vehicle delivered accords with your expectations. All values are determined based on the standard condition and may vary, due to motor and system tolerances, condition of the truck and operational conditions. Some equipment shown on photos are optional. unicarrierseurope.com