PDFA 64 Magnetic drive pups MX series
ithstands difficult operating conditions and offers high efficiency The MX Series represents the latest state of the art design in plastic agnetic drive pups. ith experience gained fro the previous generations of MDH pups the MX series has been designed to eet the ost severe of operating conditions. hen fitted with a carbon bearing the MX will allow for brief periods of dry running. The new self radiating structure (patent pending) in addition to the existing proven non contact principle and front and rear supported spindle greatly iproves the pups ability to withstand soe cavitation and running against closed discharge valve. MX series pups are highly recoended for use in various production processes such as filtering, spraying, washing and etching in surface treatent processes. An iproved echanical strength design allows operation under abnoral conditions and results in reduction of running cost and aintenance cost. The adoption of a volute casing divided into two raises efficiency. (patent pending) Siply constructed, it is robust and facilitates aintenance. GFRPP and available in standard odels. MX43 MX42 1
Magnetic drive pups MX Series faily 7 Thread type 1 Thread type 2 21 4 41 42 42H High head type 43 43H High head type MX GFRPP type MXF ETFE type Tube connection type for MX7 and MX1 are available. MXF42 MXF2 MXF1 MX41 MX2 MX1 2
Selfradiating structure Noncontact structure Robust structure Abnoral operation Ordinal operation Volute casing divided into two sections Illustration shows MX2 3
Magnetic drive pups Spindle Heatdispersion holes Rear thrust Bearing Magnet capsule Ipeller Selfradiating structure (International patent applied) Through heatdispersion holes provided in the fixed portions of the ipeller and the agnet capsule, the liquid around the spindle and the bearing is forced to circulate so that heat generated by sliding can be reduced effectively. Thus, theral deforation and elt are prevented. Noncontact structure By installing the driving agnet and the driven agnet in an inventive way, the oveent of the agnet capsule is controlled by agnetic force to prevent the rear thrust and the rear portion of the bearing coing into contact with each other continuously even during dry running. This structure reduces heat generation and secures lubricant routes. (Except MX7, 1) Volute casing divided into two sections (International patent applied) The MX series is the first resin agnet pup which uses the pup casing divided into the front casing and the rear casing to for a vortex chaber as an ideal for. Therefore, the internal leak phenoenon, which eans that the liquid getting out of the ipeller returns to the pup casing and is suppressed to a iniu and the liquid is efficiently guided to the discharge port to enhance overall efficiency. Robust structure All stress bearing portions, such as the front and rear casings, are reinforced by eans of ribs to iprove the pressure resistance and the echanical strength of the pup. The bearing is not only fixed by conventional press fit but is also sandwiched between the abutting portion in the depth of the agnet capsule and the rear end of the ipeller to iprove its reliability under high teperature. (Except MX7, 1) MX(F)42(H) and 43(H) odels: an unplugging preventive lock pin is adopted for ensuring ore steady securing. Front casing Rear casing Front casing of type 1 and 42/43 4
et end aterials MX7,1 MXF1 MX2 to 41 MXF2 to F41 MX42 to 43H MXF42 to F43 3 2 1 1 3 4 2 1 1 11 4 3 2 1 7 9 6 9 6 7 8 9 1 6 7 8 Materials of MX series Model Mark 1 Front casing 2 Ipeller 3 Rear casing 4 Magnet capsule O ring 6 Spindle 7 Bearing 8 Rear thrust 9 Mouth ring 1 Thrust/Liner ring 11 Lock pin Note 1 Note 1: An Oring ade of AFLAS is also available Materials of MXF series Note 1 : Oring ade of AFLAS and EPDM are also available MX7 MX1 MX2 to 43H MX2 to 41 V(E) CV(CE) RV(RE) AV(AE) GFRPP GFRPP CFRPP GFRPP GFRPP GFRPP PP FKM(EPDM) FKM(EPDM) Aluina ceraic Aluina ceraic CFRPPS PTFE Carbon PTFE Aluina ceraic CFRPPS, CFRPEEK (42 to 43H only) PTFE PTFE Aluina ceraic Aluina ceraic GFRPPS (42 to 43H only) Model MXF1 MXF2 to F41 MXF42 to F43 Mark RV KV CFV RFV KKV CFV RFV KKV 1 Front casing 2 Ipeller 3 Rear casing 4 Magnet capsule O ring Note 1 FKM FKM FKM 6 Spindle aluina ceraic SiC aluina ceraic SiC aluina ceraic SiC 7 Bearing PTFE SiC High density carbon PTFE SiC High density carbon PTFE SiC 8 Rear thrust aluina ceraic SiC(Front & Rear) CFRPFA 9 Mouth ring PTFE PTFE SiC PTFE SiC 1 Thrust/Liner ring aluina ceraic aluina ceraic SiC aluina ceraic SiC 11 Lock pin
Magnetic drive pups Pup identification MX7 and 1 MXF1 Pup size 7 : G1X G1 1/18 (MX series only) 1 : G1X G1 26 Series sybol MX : Material of Casing/GFRPP MXF : Material of Casing/ Materials MX Connection No ark : Tube connection Note (Fitting diaeter:26) Note:Applied to the odels MX7 and MX1 M : Thread connection V : FKM (Oring) E : EPDM (Oring) MXF RV : PTFE/FKM (Bearing/Oring) KV : SiC/FKM (Bearing/Oring) Motor No ark : 1 phase 1V 11 : 1 phase 11V 13 : 1 phase 22V/24V 32 : 3 phase 2V/22V 33 : 3 phase 22/38V 34 : 3 phase 4/44V Connection MX No ark : Hz/6Hz MXF Y : Hz/6Hz Z : 6Hz only MX2 to 43H MXF2 to F43 Pup size 2 : 2A X 2A.4 21 : 2A X 2A.7 (MX series only) 4 : 4A X 4A.4 41 : 4A X 4A.7 42H : A X 4A (MX series only) 43H : A X 4A 2.2 (MX series only) Series sybol MX : Material of Casing/GFRPP MXF : Material of Casing/ Ipeller ark MX : Hz only 6 : 6Hz only MXF T,V, : Hz only X,Y,Z 6 : 6Hz only Motor specification No ark : TEFC indoor C : TEFC outdoor A : Increased safety type (Except 2.2 type) Material of Bearing/Spindle/Oring MX CV,CE : Carbon/Aluina ceraic/fkm(epdm) RV,RE : PTFE/Aluina ceraic/fkm(epdm) Note AV,AE : Aluina ceraic/aluina ceraic/fkm(epdm) Note:Applied to the odels MX2 to MX41 MXF CFV : High density carbon/ aluina ceraic/fkm RFV : PTFE/ aluina ceraic/fkm KKV : SiC/SiC/FKM Special specification: No ark : Standard S : Non standard specification Motor MX(F)2 to 41(Original otor 3phase) 2 : 2V, 22V(Only 6Hz) 3 : 22/38V 4 : 38/4/41(Only Hz)/44V(Only 6Hz) MX(F)42H to 43H (IEC otor 3phase) 2 : 2V, 22V(Only 6Hz) 3 : 22/38V 6 : 38V 7 : 4V, 44V(Only 6Hz) 8 : 41(Only Hz) Specifications /6Hz Model MX7M MX1M MX2 MX21 MX4 MX41 MX42 MX42H MX43 MX43H MXF1 Y MXF1 Z MXF2 T/X MXF2 V/Y MXF2 /Z MXF4 T/X MXF4 V/Y MXF4 /Z MXF41 T/X MXF41 V/Y MXF41 /Z MXF42 T/X MXF42 V/Y MXF42 /Z MXF43 T/X MXF43 V/Y MXF43 /Z Connection Suction X Discharge G1 x G1 G1 x G1 2A x 2A 2A x 2A 4A x 4A 4A x 4A A x 4A A x 4A A x 4A A x 4A G1 x G1 G1 x G1 2A x 2A 2A x 2A 2A x 2A 4A x 4A 4A x 4A 4A x 4A 4A x 4A 4A x 4A 4A x 4A A x 4A A x 4A A x 4A A x 4A A x 4A A x 4A Liit of specific gravity 1. 1. 1. 1.9 / / 1.8 1.8 to 2. 1.8 to 2. 1.8 to 2. 1.8 to 2. 1.8 to 2. Standard capacity L/in Note 1) The specific gravity liit values shown above are with axiu flow. The specific gravity liit varies with the discharge. For details, please contact us. Note 2) 26 tube connection option available on the MX7 and MX1. Note 3) AV(AE) type is different in perforance. For details, please contact us. Coon specifications Range of liquid teperature : to 8 C (1 to 8 C in case AFLAS Orings are used.) Range of abient teperature : to 4 C. 7 8 1 1 2 1 2 1 7 7 1 1 1 1 1 1 2 2 2 2 2 2.4 / 7.8 6 / 9 14 / 13. 19 / 1 14. 2 3 23 / 2 3 / 36.8 / 9. /.8 11.3 / 11.8 9.1 / 9. 6.4 / 7. 1.1 / 9.3 8.1 / 7.6. / 6.3 12.8 / 12.6 1.8 / 1.4 8.1 / 6.9 18.3 / 18. 16 / 1.2 12. / 11.7 22.8 / 23.1 19.4 / 19.2 1.3 / 14.7 Maxiu capacity L/in 9 / 1 11 / 12 1 1 28 32 4 16 3 / 2 11 / 12 1 / 11 1 14 13 2 23 21 27 26 23 44 43 4 1 48 Motor.1 /.18.26.4.7.4.7 2.2 2.2.26.26.4.4.4.4.4.4.7.7.7 2.2 2.2 2.2 Mass kg 6. 8.2 13. 18. 13. 18. 3. 3. 33 33 8. 8. 14. 14. 14. 14. 14. 14. 19. 19. 19. 3 3 3 34 34 34 6
Perforance curves MX7 Hz MX7 6Hz 12. 12. 1. 1. 8. 8. 7 6. 7 INPUT 6. INPUT 4. 4 4. 4 7 2. 7 2 2. 2 2 4 6 8 1 12 14 L/in 2 4 6 8 1 12 14 L/in MX1, MXF1 Hz MX1, MXF1 6Hz 12. 12. 1 INPUT F1Y INPUT 1. 1. 8. 1 F1Y 4 8. F1Z F1Y 1 4 6. F1Y 3 6. F1Z 3 4. 1 2 4. 2 2. 1 2. 1 2 4 6 8 1 12 14 L/in 2 4 6 8 1 12 14 L/in 7
Magnetic drive pups Perforance curves MX2, MXF2 Hz MX2, MXF2 6Hz 1 2 2 F2T F2V 1 F2X F2Y 1. 1 F2Z. F2 2 F2X F2T F2V.2 2 F2Y.2 F2 F2Z 2 4 6 8 1 12 14 16 L/in 2 4 6 8 1 12 14 16 L/in MX21 Hz MX21 6Hz 2 21 21 2 1.7 1.7 21 21 1. 1..2.2 2 4 6 8 1 12 14 16 L/in 2 4 6 8 1 12 14 16 L/in 8
Perforance curves MX4, MXF4 Hz MX4, MXF4 6Hz 1 1 4 F4T F4V 1. 1 1 4 F4X 1. F4Y F4 F4Z F4T 4. F4X 4. F4V F4 F4Y F4Z 1 1 2 2 3 3 1 1 2 2 3 3 L/in L/in MX41, MXF41 Hz MX41, MXF41 6Hz 1 41 F41T 1 41 F41X F41V F41Y 1 F41 1. 1 F41Z 1. 41 41 F41X F41T F41V. F41Y F41Z. F41 1 1 2 2 3 3 1 1 2 2 3 3 L/in L/in 9
Magnetic drive pups Perforance curves MX42, MX42H, MXF42 Hz MX42, MX42H, MXF42 6Hz 42H 42H 3 3 42 2 1 F42T F42V F42 42H F42 42 F42T F42V 1. 2 1 42 F42X F42Y F42Z 42H F42Z 42 F42X F42Y 1... 1 2 3 4 6 1 2 3 4 6 L/in L/in MX43, MX43H, MXF43 43H Hz MX43, MX43H, MXF43 43H 6Hz 3 2 43 F43T F43V F43 43H F43T 43 43 3 F43X F43Y 2. 2 43H 2. F43Z 43 F43X F43Y F43V 1 F43 1. 1 F43Z 1... 1 2 3 4 6 1 2 3 4 6 L/in L/in 1
Magnetic drive pups Diensions MX7, 1 MXF1 MX2 to 41 MXF2 to F41 b MX42(H), 43(H) MXF42, F43 b f b d H e d H e d H e c L g Models MX7 MX1, MXF1 MX2, MXF2 MX21 MX4, MXF4 MX41, MXF41 a c g a c g a L L 4 4k 4øk 4 4k in H L a b c d e f g k Note 1) 13 1 28. 11 48 4 6 9 3 19. 7 11 Note 1) 1 17 319. 11 1 7 7 1 6 162 9 27 16 2 48 13 6 13 11 14 9 163 12 16 2 444 13 6 13 11 14 9 171 12 14 22 48 11 4 98 9 13 87 1 12 16 2 47 13 72 13 11 14 13 184 12 MX42 to 43, MXF42 to F43 26 28 16 28 8 2 12 16 89 17 14 36 Note 1) MX7 and MX1 shows thread type in the above diensions, Please contact us for tube connection type. Note : The diensions L ay differ with the type of otor installed. Optional accessories Iwaki dry running protector DR series Model DR is electric current sensing type dry running protector. It detects the decreased load current (lower liit) to stop the pup when it runs dry or runs with air sucking in. It can detect overload, too. Current figure to be set is indicated on LCD. Both top/botto figures can be set. Top:Overload Botto:Dry running, air suckingin operation, operation with suction side closed Builtin current transforer DIN rail ounting DR2 Specification Model Motor power Applied otor Power control V Power Input Detective current Current transforar(ct) Outer diension /6Hz DR1 DR2 2 to 24V three phase 38 to 44V three phase.7 to 1.7 to 1 1 to 24V shingle phase 1V ±1%shingle phase 2 to 24V ±1%shingle phase 3.. to 32.A Builtin D8 X 13 X H122 Union joint (Option) Special purpose union joints are available. Material : PVC/Heat resistant PVC