Marine Propulsion Systems Vertical offset, direct mount marine transmission. Description Reverse reduction marine transmission with mechanically actuated multi-disc clutches. Suitable for high performance applications in luxury sailboats, motoryachts, fishing boats, etc.. Robust design also withstands continuous duty in workboat applications. Fully works tested, reliable and simple to install. Design, manufacture and quality control standards comply with ISO 9001. Features Lightweight and robust aluminum alloy casing (sea water resistant). Case hardened and precisely ground gear teeth for long life and smooth running. Output shaft thrust bearing designed to take maximum propeller thrust. Compact, space saving design. Options Engine-matched torsional coupling. BW, SAE 4 or SAE 5 bell housings. Oil cooler. To be used when input power exceeds following values: - Pos. «A» 40 kw - Pos. «B» always. Control cable bracket for mounting of push-pull cable to the control lever. Classification by all major Classification Societies on request.
Pleasure Duty 'A' Pos 'B' Pos Nm ftlb kw hp kw hp kw hp kw hp RPM 3000 rpm 3600 rpm 3800 rpm 1.880 2.095 250 184 0.0262 0.0351 79 105 80 107 80 107 5000 2.273 2.095 206 152 0.0216 0.0289 65 87 78 104 80 107 5000 2.737 2.722 169 125 0.0177 0.0237 53 71 64 85 67 90 5000 Ratio 2.737 Max input power 80 kw
Light Duty RPM 'A' Pos 'B' Pos Nm ftlb kw hp kw hp kw hp kw hp 2800 rpm 3000 rpm 3600 rpm 1.880 2.095 226 167 0.0237 0.0317 66 89 71 95 72 97 5000 2.273 2.095 186 137 0.0195 0.0261 55 73 58 78 70 94 5000 2.737 2.722 152 112 0.0159 0.0213 45 60 48 64 57 77 5000 Ratio 2.737 Max input power 72 kw
Medium Duty RPM 'A' Pos 'B' Pos Nm ftlb kw hp kw hp kw hp kw hp 2100 rpm 2500 rpm 2800 rpm 1.880 2.095 201 148 0.0210 0.0282 44 59 53 71 59 79 5000 2.273 2.095 164 121 0.0172 0.0230 36 48 43 58 48 64 5000 2.737 2.722 136 100 0.0142 0.0191 30 40 36 48 40 53 5000 Ratio 2.737 Max input power 64 kw
Continuous Duty RPM 'A' Pos 'B' Pos Nm ftlb kw hp kw hp kw hp kw hp 1800 rpm 2300 rpm 2600 rpm 1.880 2.095 181 133 0.0190 0.0254 34 46 44 58 49 66 5000 2.273 2.095 146 108 0.0153 0.0205 28 37 35 47 40 53 5000 2.737 2.722 121 89 0.0127 0.0170 23 31 29 39 33 44 5000 Ratio 2.737 Max input power 57 kw
Dimensions mm (inches) A B1 B2 C H1 H2 L L2 L3 Bell Hsg. 85.0 (3.35) 96.0 (3.78) 149 (5.85) - 139 (5.47) 93.0 (3.66) 218 (8.56) 65.0 (2.56) 17.5 (0.69) B/W Weight kg (lb) Oil Capacity Litre (US qt) 18.5 (41.0) 0.75 (0.80) SAE Bell Housing Dimensions Bolt Holes A B C SAE No. Diameter No. mm in mm in mm in mm in 4 361.95 14.25 381.0 15.0 403.23 15.875 12 10.32 13/32 5 314.33 12.375 333.38 13.125 355.6 14.0 8 10.32 13/32 Output Coupling Dimensions Bolt Holes A B C D Diameter (E) No. mm in mm in mm in mm in mm in 102 4.02 82.5 3.25 63.5 2.50 10.0 0.39 4 10.5 0.41 Refer to the Installation Drawing for detail.
Duty Definitions PLEASURE DUTY DEFINITION Highly intermittent operation with very large variations in engine speed and power Average engine operating 500 hours/year hours limit: 300 hours/year for mechanical gearboxes Technical Notes Typical hull forms: Planing. Typical applications: Private, non-commercial, non-charter sport/leisure activities. LIGHT DUTY DEFINITION Intermittent operation with large variations in engine speed and power Average engine operating 2500 hours/year hours limit: (for hydraulic gearboxes smaller than the ZF 650 series, 2000 hours/year). Typical hull forms: Planing and semi-displacement. Typical applications: Private and charter, sport/leisure activities, naval and police activities. MEDIUM DUTY DEFINITION Intermittent operation with some variations in engine speed and power Average engine operating 4000 hours/year. hours limit: 3500 hours/year for gearboxes smaller than ZF 2000 series and workboat ZF W2700 series. Typical hull forms: Semi-displacement and displacement Typical applications: Charter and commercial craft (example: crew boats and fast ferries), and naval and police activities. CONTINUOUS DUTY DEFINITION Continuous operation with little or no variations in engine speed and power Average engine operating Unlimited hours limit: Typical hull forms: Displacement. Typical applications: Heavy duty commercial vessels, tugs, fishing boats. Duty apply to marine diesel engines at the indicated speeds. At other engine speeds, the respective power capacity (kw) of the transmission can be obtained by multiplying the Power/Speed ratio by the speed. Approximate conversion factors: 1 kw = 1.36 metric hp 1 kw = 1.34 U.S. hp (SAE) 1 U.S. hp = 1.014 metric hp 1 Nm = 0.74 lb.ft. apply to right hand turning engines, i.e. engines having counterclockwise rotating flywheels when viewing the flywheel end of the engine. These ratings allow full power through forward and reverse gear trains, unless otherwise stated. Contact your nearest ZF Sales and Service office for ratings applicable to gas turbines, gasoline (petrol) engines, as well as left hand turning engines, and marine transmissions for large horsepower capacity engines. apply to marine transmissions currently in production or in development and are subject to change without prior notice. NOTE: THE MAXIMUM RATED INPUT POWER MUST NOT BE EXCEEDED (SEE RESPECTIVE RATINGS IN THE TECHNICAL DATA SHEETS) Safe Operating Notice The safe operation of ZF products depends upon adherence to technical data presented in our brochures. Safe operation also depends upon proper installation, operation and routine maintenance and inspection under prevailing conditions and recommendations set forth by ZF. Damage to transmission caused by repeated or continuous emergency manoeuvres or abnormal operation is not covered under warranty. It is the responsibility of users and not ZF to provide and install guards and safety devices, which may be required by recognized safety standards of the respective country (e.g. for U.S.A. the Occupational Safety Act of 1970 and its subsequent provisions). Monitoring Notice The safe operation of ZF products depends upon adherence to ZF monitoring recommendations presented in our operating manuals, etc. It is the responsibility of users and not ZF to provide and install monitoring devices and safety interlock systems as may be deemed prudent by ZF. Consult ZF for details and recommendations. Torsional Responsibility and Torsional Couplings The responsibility for ensuring torsional compatibility rests with the assembler of the drive and driven equipment. ZF can accept no liability for gearbox noise caused by vibrations or for damage to the gearbox, the flexible coupling or to other parts of the drive unit caused by this kind of vibration. Contact ZF for further information and assistance. ZF recommends the use of a torsional limit stop for single engine powered boats, wherein loss of propulsion power can result in loss of control. It is the buyer's responsibility to specify this option, which can result in additional cost and a possible increase in installation length. ZF can accept no liability for personal injury, loss of life, or damage or loss of property due to the failure of the buyer to specify a torsional limit stop. ZF selects torsional couplings on the basis of nominal input torque ratings and commonly accepted rated engine governed speeds. Consult ZF for details concerning speed limits of standard offering torsional couplings, which can be less than the transmission limit. Special torsional couplings may be required for Survey Society Ice Classification requirements. 02:14 PM GMT - 01-Jun-12 Driveline and Chasis Technology