Type G / ATAT-3170 3mm Micro Pencil Grinder PUMA RANGE OF AIR TOOLS Now with new Safety levers. Better quality & Lower prices! ATAT-7032 6mm Mini Die Grinder ATAT-7033 6mm Straight Die Grinder ATAT-7033L 6mm Extended Die Grinder ATAT-7034 6mm Angle Die Grinder B20 20mm Belt Sander B10 10mm Belt Sander 50mm Air Dual Action Orbital Sander PUMA Air Engraver - ATAT-6062 Air driven engraver for easy and accurate engraving Air driven engraver for easy and accurate engraving Runs as 13,000 BPM Complete With Air Hose Simple Screw On/Off PUMA Air Engraver AT6062 Air Engraver 89.00 Hardened Needles for Puma Air Engraver Medium 24.00 Fine 24.00 53
NSK-IMPULSE SERIES SUPER PRECISION AIR GRINDERS 169mm 17mm Ø IMPULSE NSP-601 60,000 rpm 165 kg 160NL/min. 4~6kg/cm2 1.5m Std.Eqpt. 3mm collet, 1 grinding stone with axis, 1 set wrenches 162mm 39mm IMPULSE NA45-230 23,000 rpm 190 kg 160NL/min. 4~6kg/cm2 1.5m Std.Eqpt. 3mm collet, 1 special grinding stone axis, 1 Topcut stone, 1 rubber pad, 8 self-adhesive discs, 1 set spanners 161mm 39mm IMPULSE NA45-400 40,000 rpm 210 kg 160NL/min. 4~6kg/cm2 1.5m Std.Eqpt. 3mm collet, 1 grinding stone with axis, 1 set wrenches 154mm 34mm IMPULSE NA90-230 23,000 rpm 190 kg 160NL/min. 4~6kg/cm2 1.5m 3mm collet, 1 special grinding stone axis, 1 Topcut stone, Std.Eqpt. 1 rubber pad, 8 self-adhesive discs, 1 set spanners 54
IMPULSE MULTI-FUNCTIONAL PRECISION AIR GRINDER DELUXE MODELS Prices Each NSP-601 Straight Pencil Grinder NA45-400 45 deg. Grinder NA45-230 45 deg. Grinder NA90-230 90 deg. Grinder 230.94 238.82 254.75 254.75 FEATURES OF IMPULSE SERIES The high-torque air motor in pursuit of maximum efficiency of air. With a special rotary vane motor, the IMPULSE allows less drop in speed caused by fluctuations in load, and maintains speed under noload at all times, to ensure stable grinding. The twist-free mechanism prevents hose twisting. Low noise levels with the use of the fitted silencer. Airline kit will relieve heat-up problem of motor at long continuous operation. Rotating speed is adjustable by the on/off ring at the end of the grip. NSPNSP-601 (60,000 rpm) Specifically shaped to allow fingertip control. The stainless steel head and anodized aluminium alloy motor housing provide the weight and balance suitable for better handling. NA45NA45-230 (23,000 rpm) 45 grinding head for surface grinding and sanding, or mounted point and carbide burr functions. The grindstone axis can be used with the Topcut stones or rubber pad with self-adhesive discs, but can be replaced with 3mm (or optional size) collet. Suitable for surface grinding with cup-shaped grindstone. NA45NA45-400 (40,000 rpm) As NA45-230, but higher speed for use with carbide burrs and mounted points. NA90NA90-230 (23,000 rpm) As NA45-230, but 90 grinding head. CHS AL-807 6101 6102 6103 6104 Collets 2.35mm, 3mm, 1/8" Other sizes 23.60 31.45 Airline Kit 188.55 Topcut Stones 30mm dia. A80R for ferrous metals 30mm dia. A80P for non-ferrous metals 30mm dia. 86A46S coarse grinding 20mm dia. A80P for non-ferrous metals 45.20 Pack 12 ALAL-807 AIRLINE KIT This unit contributes to the smooth rotation of the Impulse system air motor. Connect directly to the compressed air line for steady air flow and automatic lubrication of the air tool. An easy-to-carry and space-saving compact design for easy set up in narrow space, or can be hung on a wall. 1 Hose joint for piping 2 Control valve (airline on/off) 3 Pressure regulator knob 4 Pressure gauge 5 Air filter check window 6 Handle 7 Rack 8 Joint for motor hose See pages 6060-61 for full range of NSK equipment An ideal system for use in mobile situations, where air quality is suspect. 55
BIAX PNEUMATIC FILING MACHINE FR 3-8 Rear Exhaust * Lever Valve * Air Hose included * Adjustable 3,000 8,000 strokes per minute OTHER SPECIFICATIONS Size (Dia x Length) 38 x 155 mm Weight 0.72 kg Air Hose Diameter 7 mm Inlet Thread R 1/8 Max. Collet Size 4 mm Stroke Length - 3 mm Part No: 150-322-730 PRICE 597.07 ADVANTAGES * Ideal for machining small radii, holes and inaccessible areas. * High power with low air consumption. * Small dimensions. * Insensitive to dust and moisture. * Low noise level. APPLICATIONS In the manufacture of tools and moulds, jigs and fixtures and diemaking. For filing, grinding, lapping, de-burring, polishing with files, honing sticks, diamond files and pads, felt polishing sticks and diamond riffler files. See also DIPROFIL (page 67) + CONTOUR KING (page 69) BIAX PNEUMATIC STRAIGHT GRINDER HANDY & POWERFUL FOR FINE MACHINING, TRIMMING & DEBURRING OTHER SPECIFICATIONS SIZE - Diameter x Length : 32 x 145mm WEIGHT - 0.093 kg POWER - 100 watt AIR HOSE DIAMETER - 4.5mm THREADED CONNECTION - M6 PART NO: 150-000-925 ** Spanners for SRD3-55/2 (003-001-150) ** PRICE 3.78 each ** Rotor Blades for SRD3-55/2 (003-003-438) ** PRICE 15.12 per set 3 ** Quick-release one hand Coupling (311-366-706)** Threaded connector. Type 6 N 3667 male thread R 1/4 PRICE 6.93 each SRD3-55/2 55,000 RPM Rear Exhaust Twist Valve on/off Low noise level Includes 1.5 metre Air Hose & 1 metre Exhaust Hose Complete with 3mm or 1/8 collet PRICE 316.50 ZG5 COLLETS SIZE PRICE EACH 1.0 mm 23.50 1.5 mm 23.50 2.0 mm 23.50 2.5 mm 23.50 3.0 mm 24.80 3/32" 23.50 1/8" 26.70 56
SA-2001 FILTER/REGULATOR LUBRICATOR A MUST FOR THE LONG LIFE AND EFFICIENT RUNNING OF HIGH SPEED GRINDERS SA-2001 69.96 Price Each Precision high speed die grinders require dry/clean and lubricated air to enhance the life of your tool and prevent erosion. A daily check should be carried out to ensure water container is empty and the Lubricator is topped up with tool oil. NORGREN BL72-201G Features: Filter/Regulator and micro-fog lubricator c/w exhausting shut-off valve, pressure gauge and mounting brackets. High efficiency water and particle removal. Quick release bayonet bowls.push to lock adjusting knob with tamper resistant option. All round (360 deg) visibility of lubricator sight feed dome for ease of drip rate setting. Micro-fog lubricator for most general purpose pneumatic applications. BL72-201G 88.30 Price Each SHELL HIGH GRADE AIRLINE/TOOL OIL For all pneumatic tools Manufactured from a low pour point, low viscosity, mineral oil. Containing additives specially blended to overcome problems associated with low temperature operation and corrosive conditions in air-operated cylinders, turbines, cams and solenoid operated valves. * excellent anti-corrosive protection * excellent low temperature properties * minimises the risk of freezing 1 Litre 5 Litres 5.25 25.00 MAXIMA ELECTRIC MICRO MOTOR SYSTEM FOR DETAILED AND PRECISION WORK 1. SPEED CONTROL FROM 2,000-35,000 2. HIGH TORQUE 85W 420N/CM 3. COMES COMPLETE WITH FOOT CONTROL 4. LEFT AND RIGHT ROTATION 5. BENCH TOOL REST 6. FIXED STRAIGHT HANDPIECE WITH 3MM COLLET ALSO AVAILABLE 3.2, 2.35 AND 1.6 Great Price!! PRICE EACH 285.00 Ideal for tools up to 10mm diameter or really intricate work. 57
PROXXON HAND TOOLS Proxxon Electric Precision Drill & Grinder 28472-240V Very low vibration at tip & very light Runs from 5,000rpm so great for delicate jobs Chuck as standard so no collets to deal with Strong permanent magnet motor Super tough long lasting plastic case as standard 5,000-20,000rpm 100W, 230V Keyless chuck (0.3 to 3.2mm) Length - 185mm, Weight - 450g Complete with 40 great accessories 43.40 Proxxon Electric Precision Drill & Grinder 28481 - PROFESSIONAL Quiet powerful motor Streamlined head of die-cast aluminium for exact bearing seats and optimal stability Runs from 5,000 to 20,000rpm Super tough long lasting plastic case as standard 5,000-20,000rpm 100W, 230V 6 collets (1.0, 1.5, 2.0, 2.4, 3.0, 3.2mm) 70.13 Length - 230mm, Weight - 500g Complete with 34 great accessories Proxxon - Precision Flexishaft Power Tool & Stand Two ball bearing in the handpiece and one in the drive end prevent tool bit chatter The highly flexible shroud and core effortlessly transmit the power without heating up even when bent tightly Bench stand allows rapid fixing and can be swivelled in all directions Up to 25,000rpm 6 collets supplied 98.21 Complete with 34 great accessories Proxxon - Long Neck Angle Grinder - 28547 Also suitable for wood Special extra long neck enable control and access Fits a wide range of discs, for grinding, cutting and sanding Super tough plastic case With grinding disc, fan sander and reinforced cutting disc. S/A 50mm dia disc holder available Max Dia 50mm 220-240V, 100W, 13,000rpm Length 280mm, Weight 550g 82.74 58