ELECTRIC SUBMERSIBLE ESP Pumping Systems franklin-energy.com
ESP Pumping Systems Franklin Electric s submersible pumps feature proven hydraulic components. Designed for marginal oil and gas wells, our patented floating stage system offers improved efficiency and performance while protecting against wear from coal fines and other debris. Our pumps are designed for use with our proven Energy Service, CBM+, and Oil Stripper motors. These motors are designed and built to withstand the harsh conditions related to marginal oil and gas wells. Pump Features Corrosion-resistant 3 Series stainless steel hub and impeller eye ring are designed to maintain a positive seal with the impeller Phenolic washer provides downthrust protection between each stage Acetal impeller, surrounded by PET diffuser cup and disc, are proven in harsh applications to run efficiently, and resistant abrasion and degradation by hydrocarbons Floating stage design allows the impeller to float independently from within the stage while minimizing the overall thrust load placed on the motor 122 F/5 C ambient temperature rating Ceramic shaft sleeves, held in place by nitrile rubber in both the top discharge and intermediate bearing sections, support and protect the shaft from vibration and abrasive wear Both the discharge head and motor bracket are cast from high quality 3 Series stainless steel then precision machined to ensure corrosion resistance, durability, and long life 2" NPT discharge connection Tall motor bracket design offers 66% more intake area over standard 4" submersible pumps Round 1/16" (1.6 mm) diameter openings in the stainless steel screen prevent the entrance of performance-robbing abrasive particles Pressure-isolating intermediate bearing allows pumps to operate at higher output pressures and greater set depths 2
ESP Models Ordering Information US GPM BPD LPM HP kw Stages Order No. Description 7 25 25 3 2.2 32 951573 25FS3S4-PE 5 3.7 52 9515735 25FS5S4-PE 3 2.2 24 951513 35FS3S4-PE 1 35 35 5 3.7 39 9515135 35FS5S4-PE 7.5 5.5 59 951514 35FS7S4-PE 1 7.5 78 9515145 35FS1S4-PE 3 2.2 19 9515153 5FS3S4-PE 15 5 5 5 3.7 52 95151535 5FS5S4-PE 7.5 5.5 32 9515154 5FS7S4-PE 1 7.5 52 95151545 5FS1S4-PE 5 3.7 26 9515235 7FS5S4-PE 2 7 7 7.5 5.5 39 951524 7FS7S4-PE 1 7.5 52 9515245 7FS1S4-PE 5 3.7 23 95152535 9FS5S4-PE 25 9 9 7.5 5.5 35 9515254 9FS7S4-PE 1 7.5 44 95152545 9FS1S4-PE Please see motor brochures for motor ordering information. ESP Nomenclature Guide 25 FS 3 S4 - PE 25 = Flow Rate (options: 25, 35, 5, 7, 9 lpm) FS = Franklin Submersible Centrifugal 3 = Motor rating in hp (options: 3, 5, 7, 1 hp) S4 = Submersible 4" PE = Pump End 3
Electric Submersible Pumps Discharge Head Bearing Insert Upper Bearing Stage Inserts Diffuser Impeller Disc Pressure Isolating Bearing Stage Seal Thrust Washer Materials of Construction Component Material Discharge head Upper bearing Bearing insert Impeller Diffuser Disc Stage inserts Stage seal/thrust washer Pressure isolating bearing Shaft Shell Motor bracket Intake screen Cable guard Screws 3 Series stainless steel Nitrile rubber Ceramic Acetal PET PET 3 Series stainless steel Carbon/phenolic 3 Series stainless steel 17-4 Series stainless steel 3 Series stainless steel 3 Series stainless steel 3 Series stainless steel 3 Series stainless steel 3 Series stainless steel By isolating each pump section the intermediate bearing protects the pump s stages from experiencing excessive hydraulic pressure differentials. This allows Franklin Electric to build electric submersible pumps with extended range and higher output pressure. Shaft Shell Cable Guard Intake Screen Screws Motor Bracket 4
Electric Submersible Pumps 25-9 BPD Electric Submersible Pump Ends Weights and Dimensions US GPM Submersible Motor Lengths HP BPD LPM HP kw 7 25 25 1 35 35 15 5 5 2 7 7 25 9 9 Please see the individual motor brochures for full motor specifications. 4" Energy Service Submersible Motors kw Three-Phase Length (L M ) Shipping Weight in mm lbs kg 5 3.7 23.19 589 56 24.9 7.5 5.5 29.19 741 71 31.7 1 7.5 32.19 818 77 34. Note: Weights and dimensions are for estimating purposes only. 4" CBM+ Submersible Motors Lp Dimensions Discharge Head Shipping Weight Inches mm NPT Inches US lbs kg 3 2.2 35 883 2 22 1 5 3.7 53 135 2 38 17 3 2.2 3 767 2 2 9 5 3.7 44 1112 2 26 12 7.5 5.5 66 1676 2 43 2 1 7.5 85 2166 2 56 26 3 2.2 24 6 2 15 7 5 3.7 37 93 2 23 1 7.5 5.5 52 1325 2 36 16 1 7.5 68 1744 2 45 2 5 3.7 4 12 2 23 11 7.5 5.5 58 148 2 33 15 1 7.5 78 1991 2 5 23 5 3.7 37 93 2 22 1 7.5 5.5 53 136 2 31 14 1 7.5 64 1635 2 36 16 Three-Phase 9.53 cm/3.75" DIAMETER 9.53 cm/3.75" DIAMETER L P L M HP kw Length (L M ) Shipping Weight in mm lbs kg 5 3.7 22.9 582 59 26.8 7.5 5.5 27.8 77 74 33.6 1 7.5 3.9 785 8 36.3 15 11.2 47.5 128 115 52.3 Note: Weights and dimensions are for estimating purposes only. 4" Oil Stripper Submersible Motors Three-Phase HP kw Length (L M ) Shipping Weight In mm lbs kg 5 3.7 23.68 61.4 56 24.9 7.5 5.5 29.68 753.8 71 31.7 1 7.5 32.68 83 77 34. Note: Weights and dimensions are for estimating purposes only. 5
25 BPD (7 GPM, 25 LPM) ESP PERFORMANCE CURVES PERFORMANCE CURVE 25 BPD (7 GPM, 25 LPM) - 6 Hz 35 1 9 3 1 hp 8 25 7 7. 5% 4% 3% 6 5 4 2 15 3 1 3 hp 2 1 5 1 2 3 4 5 6 7 8 9 1 11 12 13 14 15 16 PERFORMANCE CURVE 1 2 3 4 5 1 2 3 4 5 25 BPD (7 GPM, 25 LPM) - 6 Hz 6 16 5.% 7 14 6 5 12 1 3 hp 4.% 3.% 4 3 8 6 2 4 1 2 1 2 3 4 5 6 7 8 9 1 5 1 15 2 25 3 35 4 5 1 15 2 25 3 35 4 45 6
PERFORMANCE CURVE 35 BPD (1 GPM, 35 LPM) - 5 Hz 35 1 1 hp 9 3 8 25 7 7. 5% 4% 3% 6 5 4 2 15 3 1 3 hp 2 1 5 1 2 3 4 5 6 7 8 9 1 11 12 13 14 15 16 1 2 3 4 5 PERFORMANCE CURVE 1 9 8 7 6 5 4 3 1 2 3 4 5 35 BPD (1 GPM, 35 LPM) - 6 Hz 25 1 hp 2 7. 15 1 3 hp 6 5.% 4.% 3.% 2 5 1 1 2 3 4 5 6 7 8 9 1 11 12 13 14 1 2 3 4 5 1 2 3 4 5 6 7
PERFORMANCE CURVE 9 3 5 BPD (15 GPM, 5 LPM) - 6 Hz 6% 8 7 6 5 4 25 2 15 1 hp 7. 5% 4% 3% 3 1 2 1 5 3 hp 5 1 15 2 25 1 2 3 4 5 6 7 8 PERFORMANCE CURVE 9 8 7 6 5 4 3 2 1 2 3 4 5 6 7 8 9 5 BPD (15 GPM, 5 LPM) - 5 Hz 2 18 1 hp 16 14 7. 12 1 8 6 3 hp 4 6.% 5.% 4.% 3.% 1 2 2 4 6 8 1 12 14 16 18 2 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 9 8
PERFORMANCE CURVE 7 BPD (2 GPM, 7 LPM) - 6 Hz 6 2 18 1 hp 7% 6& 5 4 3 16 14 12 1 8 7. 5% 4% 3% 2 6 1 4 2 5 1 15 2 25 3 2 4 6 8 1 2 4 6 8 1 PERFORMANCE CURVE 7 BPD (2 GPM, 7 LPM) - 5 Hz 6 2 7.% 18 6.% 5 4 3 2 16 14 12 1 8 6 1 hp 7. 5.% 4.% 3.% 1 4 2 5 1 15 2 25 3 2 4 6 8 1 2 4 6 8 1 9
PERFORMANCE CURVE 18 5 16 9 BPD (25 GPM, 9 LPM) - 6 Hz 1 hp 7% 6% 4 14 12 7. 5% 5% 3 1 8 3% 2 6 1 4 2 5 1 15 2 25 3 35 4 2 4 6 8 1 12 2 4 6 8 1 12 14 PERFORMANCE CURVE 12 5 1 4 8 9 BPD (25 GPM,9 LPM) - 5 Hz 1 hp 7. 7.% 6.% 5.% 4.% 3 6 3.% 2 4 1 2 5 1 15 2 25 3 35 2 4 6 8 1 12 2 4 6 8 1 12 14 1
Notes: 11
USA - Artificial Lift Franklin Electric - Headquarters 9255 Coverdale Road Fort Wayne, IN 4689 Tel: 1.888.885.9248 China - Artificial Lift Franklin Electric - Shanghai Unit 12-3 Shanghai Centra Plaza No 227, Huang Pi Bei Road Shanghai, 23, CHINA Tel: 86-21-6327-99 South Africa Franklin Electric (Pty) Ltd. 13 Engwena Road Sebenza Edenvale 161 Republic of South Africa PO Box 8136 Edenglen 1613 Republic of South Africa E-mail: info@franklin-electric.co.za Tel: +27 11 723 65 Fax: +27 11 69 2417 franklin-energy.com AL-5 4-16