# PARTS USED IN OMMON ASSEMBLY AND 1021/1022 OMPRESSORS (MODELS: 1021X, 1021P, 1022X, 1022P) 1 47 64 34 # PARTS USED IN 1022 OMPRESSORS - BOXED ITEMS REPLAE THE ORRESPONDING IRLE ITEMS (MODELS: 1022X, 1022P) 6 70 DO NOT INLUDE THIS ITEM WITH MODELS 1022X, OR 1022P 4 3 74 39 16 24 1 62 63 20 21 17 66 87 9 11 3 6 42 38 1 43 69 67 22 8 8 31 7 2 3 81 19 48 23 37 17 13 44 40 26 23 14 86 7 46 28 27 4 2 30 29 4 33 10 12 41 0 21 20 36 7 74 X:\drawings\APPROVED\10OMPRESSORS\ NOTE: (1) 1021X/1022X OVERS THE FOLLOWING MODELS: 1021P, 1021X, 1022P, 1022X (2) REFER TO MEMO IN WINMAGI FOR OLOR SPES 18 2 61 REV EO REVISION DESRIPTION BY KD 8 8 // // // // DIMENSIONS ARE IN INHES MAHINED SURFAE FINISH IS 63 MIROINHES [1.6 MIROMETERS] DO NOT SALE : SALE: 1 1:10 SIZE: B 2470 South herry Ave. Phone: (9) 26-8000 Fresno, A, USA 93706-004 Fax: (9) 26-8100 THE INFORMATION DISLOSED HEREIN WAS ORIGINATED BY AND IS THE PROPERTY OF KEISER AND ALL PATENT, PROPRIETARY, DESIGN, USE, SALE, MANUFATURING, AND REPRODUTION RIGHTS THERETO ARE RESERVED BY KEISER HEKED 9/16/09 HEKED: 11/18/10 OMPRESSOR QUIET-11V-60H & 220V-0H
ITEM NO. QTY. DS PART NO. TITLE 1 1-8000 UNION - 1/4 2 2 A 803 TUBE - INSERT-1/8 3 2 A 810 AF ME - 1/4 X 1/8 4 1-817 #10-32 ADJUSTABLE ELBOW 2-900 SREW - SFHMS 6-32 X /8 6 1-9122 SREW - RPHMS #10-32 X 1 ZP 7 4-922 NUT - HELN 1/4-20 ZP 8 6-9231 NUT - HJN 3/4-10 ZP 9 3-9238 NUT - HMSN 10-32 ZP 10 4-9246 NUT - HELN 10-24 ZP 11 2-9248 NUT - HMSN 6-32 ZP 12 4-924 SREW - HHMS #10-24 X 1-1/4 ZP 13 4-92 SREW - RPHMS 6-32 X 1/4 ZP 14 1-926 SREW - RPHMS 6-32 X /8 1 2-9261 SREW - RPHMS 10-32X3/8 SS 16 2-92 SREW - RPHMS #4-40 X /16 ZP 17 10-9274 SREW - RPHTS-TF #6-32 X 3/4 BLK 18-9279 SREW - SBHTS-TF /16-18 X 3/4 ZP 19 4-928 SREW - RPHTS 10-24 X 3/4 ZP 20 8-9286 SREW - RPHTS-TF #10-24 X 1-1/4 ZP 21 8-9349 WASHER - FW-SAE-1/4 ZP 22 6-9364 WASHER - ITLW 3/4 ZP 23 6-9366 WASHER - ITLW #6 ZP 24-9379 WASHER - ITLW 10 2 1-9389 WASHER - ITLW /16 ZP 26 2-9984 NUT - HELN #6-32 ZP 27 1 A 10083 OMP-MOTOR-120V 60HZ 28 1 A 100836 OMP-MOTOR-220V 0HZ 29 1-10087 MANIFOLD-2 OUTLET W/DRAIN 30 1-10088 MANIFOLD-3 OUTLETS 31 1 B 10089 TUBE-INLET ASSY 32 1-100860 MUFFLER ASSY 33 1 B 100900 BASE FRAME - QUIET OMP 34 1 B 100901 OMPRESSOR OVER HOUSING 3 1 A 100902 DRYER ASSY. 36 1 A 100903 TANK - IN3 37 1 B 100927 WELDT-KT BRD-OMPRESSOR 38 2 A 101809 BRKT-PREOOLER W/.188 39 1 A 101811 BRKT - SOLENOID VALVE 40 1 A 101812 PLATE - LAMP 41 1 A 10200 PLATE - TRAY 42 1 A 10009 RESTRITOR-AIR 43 1 A 10011 BUSHING - TANK DRILLED 44 1 B 10030 BRAKET - KT BRD-OMP 4 1 A 10048 TUBING-OMPRESSOR 46 1 A 1003 PLASTI PLUG - 3/8 47 1 A 1008 PLUG - 1-LEAR 48 4 A 1010 SPAER - RUBBER PAD 49 2 A 10164 FOAM-MUFFLER-DRYER 0 1 B 1016 FOAM-OMPRESSOR 1 4-10167 FOAM - VIB DAMPER-3/4X3/8 2 1 A 10301 MALE RUN PIPE TEE 3 1-10312 HEK VALVE - #227 W/VITON 4 1 A 10321 PRESSURE RELIEF VALVE 1 A 10330 SOLENOID VALVE - ALLENAIR G-240V ITEM NO. QTY. DS PART NO. TITLE 6 1 A 10373 AP - 1/4" W/ 2 10-32 HOLES 7 2-10374 ELBOW-1/4NPT X (1) 10-32 8 3 A 10376 ELBOW W2 BARBS 9 1 A 1040 SOLENOID VALVE-ALLENAIR MODEL G-120V/60 60 3 A 10421 RING TERMINAL - #10-14 GA 61 4 A 10423 BUMPER - MOLDED GLIDE 62 1 A 10444 DEAL - SERIAL NUMBER-TUV 63 1 A 1044 DEAL - SERIAL NUMBER-E 64 1 A 10446 DEAL - KEEP VENT LEAR 6 1-1013 MANUAL - OPERATOR 1021-1022 66 1-10811 POWER ORD - NORTH AMERIA 67 A 11000 BUSHING - TANK 14 A 11019 BARBED ONNETOR - 1/4 X #10-32 69 6 A 11333 O-RING -.943 X.737 X.103 70 1 A 113 DEAL - KEISER LOGO-1 1/4" RED A 11423 TIE - 8 IN-PL BLK 20-11430 PLASTI TIE - 3" BLK 73 1-12420 PLASTI TIE - 14." BLK 74 4 A 2318 TANK - 14 U IN 7 1 A 93108 TUBING - 1/4 URETHANE BLK 76 1-93112 TUBING TEF ZEUS 020 - FEP 77 1-962036 ON - ML-2-P-TH 78 1-962037 ON - ML-3-P-TH 79 4-962038 ON - PIN-14-20 AWG-RIMP-TIN 80 1-962039 ON - PIN-GR-14-20 AWG-RIMP-TIN 81 1-962040 ON - POWER ENTRY-IE-S-3 82 1-966709 WIRE - SINGLE-1-16GA-GR/YEL 83 1-9660 WIRE-SINGLE-1-16GA-BROWN 84 1-9661 WIRE-SINGLE-1-16GA-BLUE 8 1-9013 TUBE - SHRINK-3/8 86 1-9014 TUBE - SILPAD 87 1-99373 DEAL - GROUND SYMBOL REV EO REVISION DESRIPTION BY KD 1 // // // // DIMENSIONS ARE IN INHES MAHINED SURFAE FINISH IS 63 MIROINHES [1.6 MIROMETERS] DO NOT SALE : 2 SALE: 1:8 SIZE: B 2470 South herry Ave. Phone: (9) 26-8000 Fresno, A, USA 93706-004 Fax: (9) 26-8100 THE INFORMATION DISLOSED HEREIN WAS ORIGINATED BY AND IS THE PROPERTY OF KEISER AND ALL PATENT, PROPRIETARY, DESIGN, USE, SALE, MANUFATURING, AND REPRODUTION RIGHTS THERETO ARE RESERVED BY KEISER HEKED 9/16/09 HEKED: 11/18/10 OMPRESSOR QUIET-11V-60H & 220V-0H X:\drawings\APPROVED\10OMPRESSORS\
OAT THE BOXED AREAS WITH 3M 90 SPRAY ADHESIVE 2X OAT THESE AREAS WITH 3M 90 SPRAY ADHESIVE DEAL SHOULD BE TANGENT WITH EDGE OF HOLE 2.006±0.00 7.00 3.70±0.00 4X OAT THIS SURFAE WITH 3M 90 SPRAY ADHESIVE 3.20±0.00 4.00±0.00 4X 2.000±0.00 4X 1.260±0.00 0.12±0.00 X:\drawings\APPROVED\10OMPRESSORS\ NOTE: APPLY LOTITE 242 TO ALL PIPE THREADS 4X UT LENGTH = 2.000 ± 0.100 0.12±0.00 REV EO REVISION DESRIPTION BY KD // // // // MAHINED SURFAE FINISH IS 63 MIROINHES [1.6 MIROMETERS] DO NOT SALE : DIMENSIONS ARE IN INHES 3 SALE: 1:8 SIZE: B 2470 South herry Ave. Phone: (9) 26-8000 Fresno, A, USA 93706-004 Fax: (9) 26-8100 THE INFORMATION DISLOSED HEREIN WAS ORIGINATED BY AND IS THE PROPERTY OF KEISER AND ALL PATENT, PROPRIETARY, DESIGN, USE, SALE, MANUFATURING, AND REPRODUTION RIGHTS THERETO ARE RESERVED BY KEISER HEKED 9/16/09 HEKED: 11/18/10 OMPRESSOR QUIET-11V-60H & 220V-0H
A 7 1/4" BLAK URETHANE TUBE UT LENGTH = 9.00±0.2 76 1/4" TEFLON TUBE 86 16 GA GRN/YLW WIRE 87 88 16 GA BRWN WIRE 16 GA BLUE WIRE 2 TOP PORT ON SOLENOID VALVE HEK VALVE PORTS INSTALL ORIFIE TO THE TOP PORT BOTTOM PORT ON SOLENOID VALVE TO PORT ON IRUITBOARD LABELED "TANK" UT LENGTH = 6.00±0.2 TO TOP PORT ON SOLENOID VALVE (USE PN 803 WITH OMPRESSION FITTING) UT LENGTH = 2.00±0.12 UT LENGTH = 22.0±0.2 A TO TOP PORT ON HEK VALVE, L = 2.0±0.2 TO BOTTOM PORT ON SOLENOID VALVE, L = 8.0±0.2 (USE PN 803 WITH OMPRESSION FITTING) 0.20±0.12 TO BOTTOM PORT ON HEK VALVE, L = 2.0±0.2 TO OPPER OIL, L = 17.2±0.2 0.00±0.12 ROUTE TUBES THROUGH TOP HOLE IN TUBE SETION A-A BRASS TEE PORTS SEE PN 10083 FOR MOTOR WIRING 84 MOTOR UT LENGTH = 2.00±0.12 TO TOP OF TANK TO SOLENOID VAVLE UT LENGTH = 1.0±0.2 UT LENGTH =.7±0.2 YLW/GRN WIRE TO MOTOR FRAME L = 11.00±0.2 82 83 81 9 64 24 6 LINE VALVE YLW/GRN, L =.0±0.2 BRWN, L = 1.00±0.2 BLUE, L = 1.00±0.2 YLW/GRN, L = 13.0±0.2 3X SOLDER TERMINALS AND PROTET WITH SHRINK TUBE 89 X:\drawings\APPROVED\10OMPRESSORS\ 32 49 UT LENGTH =.7±0.2 ROUTE HOSES THROUGH TOP HOLE IN TUBE TO PORT ON IRUITBOARD LABELED "DRIER", L = 27.0±0.2 TO PORT ON BRASS TEE UT LENGTH = 6.00±0.2 SREW INTO MAIN FRAME REV EO REVISION DESRIPTION BY KD // // // // MAHINED SURFAE FINISH IS 63 MIROINHES [1.6 MIROMETERS] DO NOT SALE : DIMENSIONS ARE IN INHES 4 SALE: 1:4 SIZE: B 2470 South herry Ave. Phone: (9) 26-8000 Fresno, A, USA 93706-004 Fax: (9) 26-8100 THE INFORMATION DISLOSED HEREIN WAS ORIGINATED BY AND IS THE PROPERTY OF KEISER AND ALL PATENT, PROPRIETARY, DESIGN, USE, SALE, MANUFATURING, AND REPRODUTION RIGHTS THERETO ARE RESERVED BY KEISER HEKED 9/16/09 HEKED: 11/18/10 OMPRESSOR QUIET-11V-60H & 220V-0H
USE ONE PLASTI TIE FOR EAH BARB, BOTH SIDES X:\drawings\APPROVED\10OMPRESSORS\ 73 DIMENSIONS ARE IN INHES MAHINED SURFAE FINISH IS 63 MIROINHES [1.6 MIROMETERS] DO NOT SALE : // // // // REV EO SHEET REVISION DESRIPTION BY KD 2470 South herry Ave. Phone: (9) 26-8000 Fresno, A, USA 93706-004 Fax: (9) 26-8100 THE INFORMATION DISLOSED HEREIN WAS ORIGINATED BY AND IS THE PROPERTY OF KEISER AND ALL PATENT, PROPRIETARY, DESIGN, USE, SALE, MANUFATURING, AND REPRODUTION RIGHTS THERETO ARE RESERVED BY KEISER HEKED 9/16/09 HEKED: 11/18/10 OMPRESSOR QUIET-11V-60H & 220V-0H OF SALE: 1:4 SIZE: B