SPnorm & SPbloc Self Priming Centrifugal Pumps

Similar documents
KIRLOSKAR HORIZONTAL AXIALLY SPLIT CASING PUMPS - TYPE DSM

KIRLOSKAR END SUCTION PUMPS-TYPE DB/DBHS. Description. Cut-sectional View. Shaft :

HORIZONTAL SPLIT CASING PUMP

VACUUM PUMP. Material of Construction: Applications:

GENERAL DIMENSIONS OF SMF PUMPS. Capacity upto 7,000 m /hr Head upto 45 m. Range :

HORIZONTAL SPLIT CASING PUMPS TYPE : UP / UPL / UPH

Catalog. Low voltage General performance IE3 efficiency cast iron motors

SUBMERSIBLE SEWAGE AND EFFLUENT PUMPS

Ni-HARD SUBMERSIBLE PUMP

H 2. O Series CENTRIFUGAL End-suction Pumps. Versatile, really robust and definitely reliable

Design Characteristics. Aplicaciones

DC MOTORS. Crompton Greaves EVERYDAY SOLUTIONS

WORM GEARS STIRRER UNITS

SUBMERSIBLE SEWAGE PUMPS TYPE : NS

POLDER PUMPSET. ISO 9001:2008 Certified Company. A Mark of Quality

Heat Transfer Fluid / Hot Water Pump HPK-L. Type Series Booklet

OPERATION & MAINTENANCE MANUAL PORTABLE SUBMERSIBLE PUMP

SMN Double-Suction Axially Split Pump

S M A R T P U M P I N G HORIZONTAL MULTISTAGE CENTRIFUGAL PUMP

NATIONAL HOUSING BANK. Press Release

CENTRIFUGAL PUMPS SAE ENGINE DRIVE 10" FEATURES

Non Return Valve Swing Check

CENTRIFUGAL PUMPS CLOSE-COUPLED 9" FEATURES SPECIFICATIONS APPLICATIONS

Etanorm SYT Type Series Booklet

CENTRIFUGAL PUMPS 7.5" FRAME MOUNT SERIES FEATURES

Spectronic-SP Air Circuit Breaker

DEWATERING PUMP. Instruction, Installation, Operation and Maintenance Manual. A Mark of Quality. ISO 9001 Certified Company

TKL. Hydro-Titan Heavy Duty Back Pull-out Water & Process Liquid Pump. Experience In Motion

Smart. Shiny. Solar Powered. All-in-One. Solar Street Light

Elite. KSB Australia Pty Ltd. Centrifugal Pump

HYDRO-TITAN. Heavy duty back pullout water & process liquid pumps

SUBMERSIBLE SEWAGE PUMP

Spectronic SP Air Circuit Breaker. Protecting people, property & productivity

Spectronic SP Air Circuit Breaker. Protecting people, property & productivity

Features: Applications: Irrigation. Commercial. Construction. Municipal. Mining

Goulds Small Capacity Double Suction Pump

ML 1.5 SS91851 ML 2 SS A 25 A 40 A 13.5 A 17 A 37 A 37 A. 6.3 A 15.5 A 15.5 A 12.5 A 23 A 23 A 19 A 830 V 415 V 500 V 3 kvar 120 A

Bearings. Shaft seal. Materials

abcdef EJseries Self-Priming Centrifugal Pumps where innovation flows SNG

RWCP, RWCN. Vertical pumps for tanks for loaded liquids. 1. Fields of Application. 3. Design. 4. Designation. 2. Operating Data

Ahead of the pack, always!

Contents. Identification

Axially split volute casing pumps. Applications. Bearings. Shaft seal. Operating data

Switch-Disconnector-Fuse HRC Fuse-links Bolted Type

HRC Fuse-links Bolted Type HG 2 A - 32 A HQ 2 A A

A pump via filter and the heat exchanger (oil cooler) maintains the working oil circulation.

Record SL. Moulded Case Circuit Breaker

CENTRIFUGAL PUMPS CLOSE-COUPLED 7.5" FEATURES

General. Shaft Seal. Nozzle Orientations. Field of Application. Design. Drive. Bearings. Product Catalogue

abcdef EUseries EN733/DIN End Suction Centrifugal Pumps where innovation flows SNG

Self-priming pump «Wilo-Drain SP» Technical Presentation of the new pump Wilo-Drain SP 24/07/2013 Olivier Rieu

LABOUR CHARGES - BODYPAINT JOBS. Applicable for Group I+ Cities New GenVerna (HCi)

HORIZONTAL SPLIT CASING PUMP

Story of 3 R s. Pum pen Intel 1 ligen z

MULTISTAGE PUMPS TYPE RKB

SEMI ELECTRIC STACKERS ELECTRIC STACKERS COUNTER BALANCED STACKERS SIMPLIFYING MATERIAL HANDLING & WAREHOUSING

B/M No. B H00925 M /8-10T 3" B H00920 M /8-10T 2-1/2" Part Number. Item. No. 800B

Motor Protection Circuit Breaker

Single Phase Submersible Pump Starters

Price List. Power Factor. With effect from June 15, Correction Products. With effect from January 03, 2012

Bulletin C Dean Pump Division. Heavy Duty, High Temperature Process Pumps. R4140 Telescoping Guard. R4140 C-Face Motor Support

Jansen Pompentechniek T: +31(0) E:

Price List No.: LTD/002 Effective from Supercedes Price List No.: LTD/001 Dated (Added new Series, Options & Accessories)

ISO 2858 Back Pullout End Suction Centrifugal Pumps

High Temperature Chemical Process Inline Pumps

Catalog. Classiq range Wiring accessories

855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps

Electro Hydraulic Thrustor

PROCESS PUMPS MODEL V200 ANSI B73.2

CROMPTON GREAVES LTD. M5,Pumps Division C-19, MIDC, Ahmednagar, Maharashtra

Range : 7.5kW to 630/800kW

Domestic Pumps. Pumps. Self Priming Monoblock Pumps Open Well & Submersible Pumps

Horizontal Double Suction Volute Pump Type CN. Pipe line

Liebert GXT-MT 1-3kVA UPS. Power Protection for Business Critical Continuity

Data sheet. Page: 1 / 5 ETN GG A 11GA201502B. Operating data. Design. Requested developed head m. Efficiency 74.

Standard SO according to DIN

Materials: Parts of the pump in contact with the liquid are manufactured from the following standard

Berkeley Cast Iron Impeller B6EXQBH SAE ENGINE MOUNT. Flanged Case, Packing Construction. Table I. Page Date March 4, 2013 Supersedes 01/01/04

Capacity : 5 tons Engine Power : 79 bhp. High Performance & rugged Forklift Trucks.

Spectra SP. Range of SD & SDF 32A to 800A

Maximum retail price list. For SIBCO range of bearing housings and accessories Bearing housings, sleeves, locknuts, lock washers and locating rings

Non-clogging Pump DBS TECHNICAL DATA. Output: up to 1200 m 3 /h. depending of the pump size and material execution

Data sheet. Customer item no.: Communication dated: Number: ES Doc. no.: Item no.: 100 Quantity: 1 Date: 19/03/2015 Page: 1 / 6

FLHC SERIES DATA BOOKLET

Energy Efficient 3 Phase LV Induction Motors

Casing. Impeller. Gland. Shaft. Bearing Bracket. Support Foot RANGE APPLICATIONS

OPERATION & MAINTENANCE MANUAL POLDER PUMP. A Mark of Quality

Index - Section 14 End Suction Pump Semi-Open Impeller

VERTICAL TURBINE PUMP

Data sheet. Page: 1 / 5. ETL GGSAV11D BKSBIE3 Inline pump. Operating data. Design

Domestic Pumps. Pumps. Self Priming Monoblock Pumps Open Well & Submersible Pumps

Energy Saving HRC Fuse-Links

Pumps Motors ISO 9001 Company

Manufacturing Program: LAND APPLICATIONS. Mixed Flow Pump. type TR

Berkeley Cast Iron Impeller B4JPBH ELECTRIC MOTOR DRIVE. Flanged Case, Packing Construction. Table I. Table II

PUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps...

The most widely used motors from the world leaders

Centrifugal End Suction Fire Pumps

Data sheet. Etaline GN /1852 G10 Version no.: 1 Inline pump. Operating data. Design. Requested developed head m

EN. 850 Filtrate Pumps. Technical Specification Pages

Transcription:

SPnorm & SPbloc Self Priming Centrifugal Pumps SPbloc SPbloc SPnorm

SPnorm & SPbloc Self Priming Centrifugal Pumps

SPnorm & SPbloc - Self Priming Centrifugal Pumps Design SPnorm: Horizontal self priming volute casing pumps, single stage with semi open impeller, in back pull out design. Long coupled on baseplate, suction lift up to 7 metres. Technical specifications conforms to IS 8472 & IS 8418. Performance Testing as per IS 11346. SPbloc: Horizontal self priming volute casing pumps, single stage with semi open impeller, in back pull out design. Monobloc, mono shaft design, hydraulics are assembled on extended motor shaft, suction lift up to 7 metres. Technical specifications conforms to IS 8472 & IS 8418. Performance Testing as per IS 11346. SPbloc SPnorm Applications Suitable pump for pumping 1. Muddy water, sewage, polluted liquids including solids etc. 2. Applications where priming & foot valve is to be avoided. Industry wise Applications: Industrial: Pumping petroleum products, chemicals, effluents, Sewage, ash-water etc Mobile Machinery: Cooling water for marine engines & showels. Tiles & Marble industry: for waste water. Civil Construction: De-watering foundation, trenches and pits. Public utilities: Sewage pumping. Marine: Pumping water from docks, ports, vessels. Technical Data SPbloc (monobloc) SPnorm (barepump) Head m 6 to 36 6 to 50 Capacity Power rating LPS up to 19.4 up to 71 m 3 /hr up to 70 up to 253 HP 1 to 7.5 1 to 25 kw 0.75 to 5.5 0.75 to 18.5 DN 40, 50, 80, 100, DN size DN 40, 50, 80 150 Pump body C.I. C.I., SS MOC Sealing Driver body C.I. - Impeller C.I., SS, Bronze C.I., SS, Bronze Wear plate C.I., SS C.I., SS Shaft SS 410 SS 410, 316, 304 Shaft sleeve SS 410 SS 410, 316, 304 Gland packing or mechanical seal Gland packing or mechanical seal or Engine

Performance Data (in LPS) Self Priming Mud Mono Pumpset rotation # Discharge in LPS SPbloc-15M* 0.75 1 2900 7 ACW 5 4 3 2 2 1 SPbloc-16M 1.50 2 2900 8.5 ACW 6 6 5 5 4 3 2 2 SPbloc-17M 2.20 3 2900 10.5 ACW 9 9 8 7 6 5 4 3 1 SPbloc-18M 3.70 5 1450 15.5 CW 19 17 16 14 13 11 8 6 4 SPbloc-14M 3.70 5 2900 7 ACW 7 7 6 6 6 4 3 1 SPbloc-14SM 5.50 7.5 2900 14.5 ACW 14 14 13 13 12 11 9 6 4 Self Priming Bare Mud Pump - driven rotation# Discharge in LPS SPnorm-15 0.75 1 2850 7 ACW 5 4 4 3 2 1 SPnorm-16 1.50 2 2850 8.5 ACW 6 6 5 4 4 3 2 2 SPnorm-17 2.20 3 2850 10.5 ACW 9 9 8 8 7 6 6 5 3 1 SPnorm-18 3.70 5 1420 15.5 CW 20 19 17 16 14 12 10 6 4 SPnorm-14 3.70 5 2900 7 ACW 9 8 8 7 7 5 4 2 1 SPnorm-14S 5.50 7.5 2900 14.5 ACW 14 14 14 13 13 11 10 7 5 SPnorm-14H 9.30 12.5 2900 15.5 ACW 20 20 20 20 20 20 20 20 20 20 20 19 19 19 19 19 17 15 15 13 11 10 7 4 SPnorm- 23 7.50 10 1450 18.5 CW 32 30 28 26 25 22 21 19 14 9 7 SPnorm-23 S 9.30 12.5 1450 23 CW 38 36 33 32 30 28 27 24 22 18 15 13 5 SPnorm-60 15.00 20 1450 34 ACW 63 59 55 53 51 46 43 40 32 22 SPnorm-60 S 18.50 25 1450 40 ACW 70 68 65 63 61 55 52 49 41 32 25 19 Self Priming Bare Mud Pump - Engine driven rotation# Discharge in LPS SPnorm-18 4.50 6.00 1500 15.5 CW 20 19 17 16 14 12 10 6 4 SPnorm-18 9.00 12.00 1800 15.5 CW 20 19 17 16 14 12 10 6 4 SPnorm- 23 9.00 12.00 1500 18.5 CW 32 30 28 26 25 22 21 19 14 9 7 SPnorm-23 S 10.50 14.00 1500 23 CW 38 36 33 32 30 28 27 24 22 18 15 13 5 SPnorm-60 16.50 22.00 1500 34 ACW 63 59 55 53 51 46 43 40 32 22 SPnorm-60 S 19.50 26.00 1500 40 ACW 70 68 65 63 61 55 52 49 41 32 25 19 * SPbloc 15M is available in both single as well as 3 phase. As a standard, 15M is supplied with mechanical seal arrangement, however can also be supplied with gland packing. All other sizes are standard gland packed & optionally available in mechanical seal arrangement. # as viewed from suction side CW - clockwise ACW - Anticlockwise Note: Performance applicable to liquid of specific gravity 1 & viscosity same as water.

Performance Data (in m 3 /hr) Self Priming Mud Mono Pumpset rotation # Discharge in m 3 /hr SPbloc-15M* 0.75 1 2900 7 ACW 18 15 12 8 5 3 SPbloc-16M 1.50 2 2900 8.5 ACW 23 22 19 17 15 11 9 6 SPbloc-17M 2.20 3 2900 10.5 ACW 32 31 28 27 22 19 15 10 2 SPbloc-18M 3.70 5 1450 15.5 CW 67 62 56 50 46 41 29 22 13 SPbloc-14M 3.70 5 2900 7 ACW 26 25 23 22 20 15 10 4 SPbloc-14SM 5.50 7.5 2900 14.5 ACW 51 50 48 47 44 39 32 23 14 Self Priming Bare Mud Pump - driven rotation# Discharge in m 3 /hr SPnorm-15 0.75 1 2850 7 ACW 17 16 14 11 7 4 SPnorm-16 1.50 2 2850 8.5 ACW 22 20 17 15 13 10 8 5 SPnorm-17 2.20 3 2850 10.5 ACW 33 32 30 28 26 23 21 18 12 4 SPnorm-18 3.70 5 1420 15.5 CW 71 67 62 56 49 43 35 21 13 SPnorm-14 3.70 5 2900 7 ACW 31 29 27 26 24 19 14 7 2 SPnorm-14S 5.50 7.5 2900 14.5 ACW 51 50 49 48 46 41 34 26 17 SPnorm-14H 9.30 12.5 2900 15.5 ACW 72 72 72 72 71 71 71 71 71 71 71 70 69 69 69 67 63 54 53 48 41 35 25 14 SPnorm- 23 7.50 10 1450 18.5 CW 114 107 99 93 89 80 75 69 52 33 25 SPnorm-23 S 9.30 12.5 1450 23 CW 137 128 119 114 109 101 95 88 78 64 55 46 20 SPnorm-60 15.00 20 1450 34 ACW 225 211 198 191 183 166 155 144 114 80 SPnorm-60 S 18.50 25 1450 40 ACW 253 246 232 225 218 199 189 177 148 115 91 67 Self Priming Bare Mud Pump - Engine driven rotation# Discharge in m 3 /hr SPnorm-18 4.50 6.00 1500 15.5 CW 71 67 62 56 49 43 35 21 13 SPnorm-18 9.00 12.00 1800 15.5 CW 71 67 62 56 49 43 35 21 13 SPnorm- 23 9.00 12.00 1500 18.5 CW 114 107 99 93 89 80 75 69 52 33 25 SPnorm-23 S 10.50 14.00 1500 23 CW 137 128 119 114 109 101 95 88 78 64 55 46 20 SPnorm-60 16.50 22.00 1500 34 ACW 225 211 198 191 183 166 155 144 114 80 SPnorm-60 S 19.50 26.00 1500 40 ACW 253 246 232 225 218 199 189 177 148 115 91 67 * SPbloc 15M is available in both single as well as 3 phase. As a standard, 15M is supplied with mechanical seal arrangement, however can also be supplied with gland packing. All other sizes are standard gland packed & optionally available in mechanical seal arrangement. # as viewed from suction side CW - clockwise ACW - Anticlockwise Note: Performance applicable to liquid of specific gravity 1 & viscosity same as water.

Cross Sectional View - SPnorm 14 (Reference Drawing) 43 41 42 44 45 1 37 32 31 28 29 30 7 6 2 33 8 9 12 19 13 10 36 35 34 38 40 72 73 39 23 22 55 24 47 46 3 4 5 14 20 21 17 18 15 16 48 52 50 49 56 53 54 29 Stud with Nut for Suction housing 4 M.S. 28 Suction Housing 1 C.I. Gr. FG-260 24 Stud with Nut for Insp. window cover 2 M.S. 23 Packing for Insp. window cover 1 Paper 22 Insp window cover 1 C.I. Gr. FG-260 21 Gasket 1 Paper 20 Shaft Sleeve 1 S.S. Gr. AISI410 19 Grease Cup with Pipe Nipple 1 M.S. 18 Lantern ring 1 Plastic 17 Gland Packing 1 Set Graphite Asbestos 16 Hex. bolt or Stud with Nut for Gland cover 2 M.S. 15 Gland Cover 1 C.I. Gr. FG-260 14 Packing for Stuffing Box Housing 1 Paper 13 Stuffing Box Housing 1 C.I. Gr. FG-260 12 Stud with Nut for Brg. housing & St. box housing 8 M.S. 11 Packing for Bearing housing 3 Paper 10 Bearing Housing 1 C.I. Gr. FG-260 9 Counter Sunk Screw for Wearing Plate 3 S.S. Gr. AISI304 8 Wearing Plate (DE) 1 C.I. Gr. FG-260 7 Counter Sunk Screw for Wearing Plate 3 S.S. Gr. AISI304 6 Wearing Plate (NDE) 1 C.I. Gr. FG-260 5 Key for Impeller Nut 1 M.S. 4 Washer for Impeller Nut 1 M.S. 3 Impeller Nut 1 M.S. 2 Impeller 1 C.I. Gr. FG-260 1 Pump Body 1 C.I. Gr. FG-260 Part no Part Description Qty Material 73 Key for Coupling 1 M.S. 72 Bearing Lock Nut 1 M.S. 56 Rotar Shaft 1 CRNO Gr. M-47 & EN-8D 55 Cheese Head Screw for Bearing cover (DE side) 4 M.S 54 Bearing Cover (DE side) 1 C.I. Gr. FG-260 53 Bearing (DE side) 1 Steel 52 Cheese Head Screw for Bearing cover (NDE side) 3 M.S. 50 Bearing Cover (NDE side) 1 C.I. Gr. FG-260 49 Bearing (NDE side) 1 Steel 48 Water Deflector 1 Rubber 47 O-Ring for Drain Plug 1 Rubber 46 Drain Plug 1 C.I. Gr. FG-260 45 O-Ring for Water Plug 1 Rubber 44 Water Plug (for Priming) 1 C.I. Gr. FG-260 43 Stud with Nut for Delivery flange 4 M.S. 42 Packing for Delivery flange 1 Rubber 41 Delivery flange 1 C.I. Gr. FG-260 40 Stud with Nut for Suction flange 4 M.S 39 Packing Suction Flange 1 Rubber 38 Suction Flange 1 C.I. Gr. FG-260 37 Cheese Head Screw for Wt. fixing 2 M.S 36 Washer for Flap valve 1 M.S. 35 Hex. bolt with Nut for Flap valve 1 M.S. 34 Weight for Flap valve (big) 1 C.I. Gr. FG-260 33 Weight for Flap valve (medium) 1 C.I. Gr. FG-260 32 Weight for Flap valve (Small) 1 C.I. Gr. FG-260 30 Flap valve 1 Nitril Rubber Part no Part Description Qty Material

Cross Sectional View - SPbloc 14M (Reference Drawing) 43 41 42 45 44 33 36 35 34 1 37 32 31 28 29 30 7 6 2 8 9 12 19 13 10 52 67 65 69 68 66 55 38 40 39 23 22 24 47 46 3 4 5 14 20 21 17 18 15 16 56 48 50 49 51 57 59 60 61 58 62 51 54 63 64 37 Cheese Head Screw for Wt. fixing 2 M.S 36 Washer for Flap valve 1 M.S. 35 Hex. bolt with Nut for Flap valve 1 M.S. 34 Weight for Flap valve (big) 1 C.I. Gr. FG-260 33 Weight for Flap valve (Medium) 1 C.I. Gr. FG-260 32 Weight for Flap valve (Small) 1 C.I. Gr. FG-260 31 Packing for Flap valve 1 Paper 30 Flap valve 1 Nitril Rubber 29 Stud with Nut for Suction housing 4 M.S. 28 Suction Housing 1 C.I. Gr. FG-260 24 Stud with Nut for Insp. window cover 2 M.S. 23 Packing for Insp. window cover 1 Paper 22 Insp window cover 1 C.I. Gr. FG-260 21 Gasket 1 Paper 20 Shaft Sleeve 1 S.S. Gr. AISI410 19 Grease Cup with Pipe Nipple 1 M.S. 18 Lantern ring 1 Plastic 17 Gland Packing 1 Set Graphite Asbestos 16 Hex. bolt or Stud with Nut for Gland cover 2 M.S. 15 Gland Cover 1 C.I. Gr. FG-260 14 Packing for Stuffing Box Housing 1 Paper 13 Stuffing Box Housing 1 C.I. Gr. FG-260 12 Stud with Nut for Brg. housing & St. box housing 8 M.S. 10 Bearing Housing 1 C.I. Gr. FG-260 9 Counter Sunk Screw for Wearing Plate 1 S.S. Gr. AISI304 8 Wearing Plate (DE) 1 C.I. Gr. FG-260 7 Counter Sunk Screw for Wearing Plate 3 S.S. Gr. AISI304 6 Wearing Plate (NDE) 1 C.I. Gr. FG-260 5 Key for Impeller Nut 1 M.S. 4 Washer for Impeller Nut 1 M.S. 3 Impeller Nut 1 M.S. 2 Impeller 1 C.I. Gr. FG-260 1 Pump Body 1 C.I. Gr. FG-260 Part No. Description Qty Material 69 Cheese Head Screw for Terminal 4 M.S. 68 Terminal 1 Bakelite 67 Cheese Head Screw for Terminal Box 4 M.S. 66 Packing for Terminal Box 1 Rubber 65 Terminal Box 1 C.l. or M.S. Sheet 64 Fan Cover 1 M.S. Sheet 63 Fan 1 Plastic 62 End Cover 1 C.I. Gr. FG-260 61 Washer for Adjustment Bolt 1 M.S. 60 Adjustment Bolt 1 M.S. 59 Body 1 C.I. Gr. FG-260 58 Stator Winding 1 Copper 57 Stator 1 CRNO Gr. M-47 56 Rotar Shaft 1 CRNO Gr. M-47 & EN-8D 55 Cheese Head Screw for Bearing cover (DE side) 4 M.S 54 Bearing Cover (DE side) 1 C.I. Gr. FG-260 53 Bearing (DE side) 1 Steel 52 Cheese Head Screw for Bearing cover (NDE side) 4 M.S 51 Bearing Cover (In Side) 1 C.I. Gr. FG-260 50 Bearing Cover ( Out side) 1 C.I. Gr. FG-260 49 Bearing (NDE side) 1 Steel 48 Water Deflector 1 Rubber 47 O-Ring for Drain Plug 1 Rubber 46 Drain Plug 1 C.I. Gr. FG-260 45 O-Ring for Water Plug 1 Rubber 44 Water Plug (for Priming) 1 C.I. Gr. FG-260 43 Stud with Nut for Delivery flange 4 M.S. 42 Packing for Delivery flange 1 Rubber 41 Delivery flange 1 C.I. Gr. FG-260 40 Stud with Nut for Suction flange 4 M.S 39 Packing Suction Flange 1 Rubber 38 Suction Flange 1 C.I. Gr. FG-260 Part No. Description Qty Material

KSB Pumps and Valves - We are where you are Manufacturing Plants : Head Office & Pimpri : Irrigation & Process Division Mumbai-Pune Road, Pimpri, Pune - 411 018. Tel.: 020-2710 1000 Fax : 020-2742 6000 Chinchwad : Power Projects Division D-II Block, MIDC Chinchwad, Pune - 411 019. Tel.: 020-2740 9100 Fax : 020-2747 0890 Khandala : Energy Pumps Division A1, MIDC Khandala Phase II, Village Kesurdi, Tal. Khandala, Satara - 412 802. Tel. : 02169-246800 Coimbatore : Valves Division 151, Mettupalayam Road, NSN Palayam Post, Coimbatore - 641 031. Tel.: 0422-2468222, 2468547-9 Fax : 0422-2468232 Sinnar : Standard Pumps Division Plot No. E-3 & E-4, MIDC Sinnar, Nashik - 422 113. Tel.: 02551-230252 / 53, 229700 Fax : 02551-230254 Vambori : Foundry Division Vambori, Ahmednagar - 413 704. Tel.: 02426-272534, 272550, 272463 Fax : 02426-272043 Regd. Office : 126, Maker Chambers III, Nariman Point, Mumbai - 400 021. Tel.: 022-6658 8787 Fax : 022-6658 8788 Zonal Offices : East : 30, Circus Avenue, 2nd Floor, Kolkata - 700 017. Tel.: 033-2287 0473, 2290 0117 Fax : 033-2287 0588 West : 126, Maker Chambers III, Nariman Point, Mumbai - 400 021. Tel.: 022-6658 8787 Fax : 022-6658 8788 North : KSB House, A-96, Sector IV, NOIDA, Dist. Gautam Budh Nagar - 201 301. Tel.: 0120-254 1091 Fax : 0120-255 0567 South : Guindy House, II Floor, # 92 Anna Salai, Chennai - 600 032. Tel.: 044-2235 2571-2, 2235 5673 Fax : 044-2235 2749 Service Stations : Chennai : # 6, Self-help Industrial Estate, Keelkattalai, Near Keelkattalai - Pallavaram Radial Road Signal junction, Chennai 600 117 Tel. 044-22681159 Howrah : Sadananda Industrial Estate Howrah Amta Road, Balitikuri, Bakultala Howrah - 711 113, West Bengal NOIDA : KSB House, A-96, Sector IV, NOIDA, Dist. Gautam Budh Nagar - 201 301. Tel.: 0120-2471 600 Fax : 0120-255 0567 Odhav : Shed No. 22, Gujarat Vepari Mahamandal, Odhav, Ahmedabad - 382 410. Tel.: 079-2290 0372 Fax : 079-2290 0749 Branch Offices : Ahmedabad : Shed No. 22, Gujarat Vepari Mahamandal, Odhav, Ahmedabad - 382 410. Tel.: 079-2290 0707, 2290 0717 Aurangabad : Plot No. P-204, Shivshankar Colony, Near Hotel Sayli, Aurangabad - 431 005. Tel.: 0240-235 1440, 234 2447 Fax : 0240-235 1440 Bangalore : # 191, 1st Floor, West Of Chord Road, II Stage, Bangalore - 560 086. Tel.: 080-2349 1806, 2349 3925 Fax : 080-2349 6036 Baroda : 4-B, Ramkrishna Chamber, Productivity Road, Baroda - 390 005. Tel.: 0265-233 0532, 233 3226 Fax : 0265-235 0002 Bhubaneswar : N5/39,1st Floor, IRC Village, Nayapalli, Bhubaneswar - 751 015. Tel.: 0674-255 8497 Fax : 0674-255 8499 Chandigarh : SCO - 189, 2nd Floor, Sector - 7C, Chandigarh - 160 019. Tel. / Fax : 0172-279 0072, 279 0062 Indore : B-14, Ratlam Kothi, Kanchan Baug Road, Indore - 452 001. Tel.: 0731-252 9478, 252 9704 Fax : 0731-252 9704 Jaipur : Anjali Chambers, 2nd Floor, Block C, 10, Rajbhawan Road, Civil Lines, Jaipur - 302 001. Tel.: 0141-222 4554, 222 4904 Fax : 0141-222 4904 Jamshedpur : Flat No. B-1/5, 1st Floor, Gangotri House, Q Road, 1, Sura Bhawan Area, South Park, Bistupur, Jamshedpur - 831 001. Tel.: 0657-231 7129, 231 7130 Fax : 0657-231 7128 Lucknow : 309, Chintels House, 16, Station Road, Lucknow - 226 001. Tel.: 0522-263 5203, 263 5597 Fax : 0522-263 5597 Mumbai : 126, Maker Chambers III, Nariman Point, Mumbai - 400 021. Tel.: 022-6658 8787 Fax : 022-6658 8788 Nagpur : 203, Suryakiran Complex, Bajaj Nagar, Nagpur - 440 010. Tel.: 0712-223 6889, 222 9148 Fax : 0712-222 9148 Pune : Mumbai-Pune Road, Pimpri, Pune - 411 018. Tel.: 020-2710 1000 Fax : 020-2742 6000 Raipur : D-62, Sector - 2, Devendra Nagar, P.O. Pandri, Raipur - 492 001. (Chhattisgarh). Tel.: 0771-258 3658, 258 3921 Fax : 0771-258 3921 Secunderabad : D. No. 12-13-197, 198, Flat No. 103 & 104, 1st Floor, Pavani Anusuya Towers, Tarnaka, Secunderabad - 500 017. Tel.: 040-2700 1724, 2700 3696 Fax : 040-2700 1725 1229.02-EN Subject to technical modification without prior notice KSB Pumps Limited Standard Pumps Division Plot No. E-3 & E-4, MIDC Sinnar, Nashik - 422 113. Tel.: +91-2551-230252 / 253, 229700 www.ksbindia.co.in Our toll free no : 1800 233 1299 (Mon-Sat. 8am to 10pm) Mktg. Services / 04-18 / 2000