Overview Datasheet High Pressure 2-way 2 1/2-6 Globe Valves Designed to work with either an electronic actuator with a 3/4-inch (20 mm) or 1-1/2-inch (40 mm) stroke, the two-way globe valves are available in both ANSI Class 125 and 250 for normally open or normally closed action. Applications Recommended for chilled or hot water; or 50% water-glycol solutions. Water inlet pressures up to ANSI 125 and ANSI 250 cast iron body rating Water modulating differential pressure up to 25 psi (172 kpa) for bronze trim and 50 psi (345 kpa) for SS steel trim Steam inlet to 100 psi with modulating differential pressure up to 50 psi (345 kpa) Features & Benefits Valve flange face-to-face dimensions meet ISA 75.03 standards. Universal bonnet for direct-coupled actuators Equal percentage flow characteristic Stainless steel trim ANSI Leakage Class IV EPDM O-ring packing
Large Globe Valve and Actuator Compatibility Chart Valve Actuator (Close Off Pressure - psi) Valve Number of Ports Size (in) Flow Rate (Cv) Trim Action ANSI Class Flow Type VA-599-06610 2-Way 2-1/2 63 SS NO Equal % 125 200 VA-599-06615 2-Way 2-1/2 63 SS NC Equal % 125 200 VA-599-06620 2-Way 2-1/2 63 SS NO Equal % 250 200 VA-599-06625 2-Way 2-1/2 63 SS NC Equal % 250 200 VA-599-06611 2-Way 3 100 SS NO Equal % 125 200 VA-599-06616 2-Way 3 100 SS NC Equal % 125 200 VA-599-06621 2-Way 3 100 SS NO Equal % 250 200 VA-599-06626 2-Way 3 100 SS NC Equal % 250 200 VA-599-06612 2-Way 4 160 SS NO Equal % 125 200 VA-599-06617 2-Way 4 160 SS NC Equal % 125 200 VA-599-06622 2-Way 4 160 SS NO Equal % 250 200 VA-599-06627 2-Way 4 160 SS NC Equal % 250 200 VA-599-06613 2-Way 5 250 SS NO Equal % 125 200 VA-599-06618 2-Way 5 250 SS NC Equal % 125 200 VA-599-06623 2-Way 5 250 SS NO Equal % 250 200 VA-599-06628 2-Way 5 250 SS NC Equal % 250 200 VA-599-06614 2-Way 6 400 SS NO Equal % 125 200 VA-599-06619 2-Way 6 400 SS NC Equal % 125 200 VA-599-06624 2-Way 6 400 SS NO Equal % 250 200 VA-599-06629 2-Way 6 400 SS NC Equal % 250 200 VA-250GSX024P VA-1K0GSX024P 2/10 High Pressure 2-way 2 1/2-6 Globe Valves
Product Specifications Valve size 2-1/2 to 6-inch (65 to 150 mm) Capacity See Tables 2 and 3, and Figure 1 Body style Flanged Seat style Single seat, metal-to-metal Action Normally Open (NO) Normally Closed (NC) Stem travel (stroke) 2-1/2 and 3-inch 3/4-inch (20 mm) 4, 5, and 6-inch 1-1/2-inch (40 mm) Valve body rating ANSI Class 125 and 250; see Table 1 Material Body Cast iron ASTM A126 Class B Body trim Stainless steel Stem Stainless steel ASTM A582 Type 303 Packing EPDM O-ring Controlled medium Water, 50% water-glycol solutions Medium temperature range 20 F to 250 F (-7 C to 120 C) Operating Maximum recommended differential Pressure for modulating service 50 psi (345 kpa) Rangeability >100:1 Close-off pressures See Table 4 Close-off ratings According to ANSI/FCI 70-2 Leakage rate Class IV (0.01% of Cv) Flow characteristic Equal Percentage Miscellaneous Canadian Registration Numbers 0H7645.5... and 0C0838.9... Mounting location NEMA 1 (interior only) Dimensions See Figure 5 Face-to-face dimensions ANSI/ISA S75.03 Valve weight See Table 7 Service Kits Packing kit VA-599-08020 Rebuild/repack kits See Table 5 Stem retainer kit: 2-1/2-inch and 3-inch valves VA-599-10048 4-inch, 5-inch, and 6-inch valves VA-599-10049 High Pressure 2-way 2 1/2-6 Globe Valves 3/10
Table 1. Cast Iron Valve Body Ratings. Temperature Pressure psig (kpa) F C ANSI Class 125 ANSI Class 250 20 to 150 30 to 66 200 (1387) 500 (3447) 200 93 190 (1310) 460 (3171) 250 121 175 (1206) 415 (2861) 300 149 165 (1137) 375 (2585) 400 204 140 (965) 290 (1999) 450 232 125 (861) 250 (1723) Table 2. Maximum Water Capacity - U.S. Gallons Per Minute. Valve Size in Inches Pressure Differential - psi Cv/1 2 3 4 5 6 8 10 15 20 25 30 40 50 60 75 2-1/2 63 89 109 126 141 154 178 199 244 282 315 345 398 445 488 546 3 100 141 173 200 224 245 283 316 387 447 500 548 632 707 775 866 4 160 226 277 320 358 392 453 506 620 716 800 876 1012 1131 1239 1386 5 250 354 433 500 559 612 707 791 968 1118 1250 1369 1581 1768 1936 2165 6 400 566 693 800 894 980 1131 1265 1549 1789 2000 2191 2530 2828 3098 3464 Table 3. Maximum Water Capacity - Cubic Meters Per Hour (m3/hr). Valve Size in mm Pressure Differential - kpa 1 10 20 30 40 50 60 80 Kvs/ 100 150 200 300 400 500 65 5.4 17.1 24 30 34 38 42 48 54 66 76 94 108 121 80 8.5 27 38 47 54 60 66 76 85 104 120 147 170 190 100 14 43 61 75 87 97 106 123 137 168 194 237 274 306 125 21 68 96 117 135 151 166 191 214 262 303 371 428 479 150 34 108 153 187 216 242 265 306 342 419 484 592 684 765 4/10 High Pressure 2-way 2 1/2-6 Globe Valves
Selection Example Select a valve given: 1 = Required flow = 500 gpm 2 = Desired pressure drop = 5 psi 3 = Select a 5-inch (125 mm) valve, Cv 250. Figure 1. Water Capacity Graph. Table 4. Close-off Pressures for Electronic Actuators Action Valve Size In. (mm) VA-1K0GSX024P VA-250GSX024P psi (kpa) psi (kpa) Normally Open Normally Closed 2-1/2 (65) 200 (1378) 3 (80) 200 (1378) 4 (100) 200 (1378) 5 (125) 200 (1378) 6 (150) 200 (1378) 2-1/2 (65) 200 (1378) 3 (80) 200 (1378) 4 (100) 200 (1378) 5 (125) 200 (1378) 6 (150) 200 (1378) High Pressure 2-way 2 1/2-6 Globe Valves 5/10
Operation Figure 2 shows the normally open valve in the open or full flow position and the normally closed valve in the closed, or zero flow position. The actuator spring provides the necessary force to hold the stem in the raised or normal position. In the event of power failure, a spring return actuator returns the valve to its normal position. Non-spring return actuators will hold the last commanded position. Normally Open Normally Closed Figure 2. Operation. Sizing The sizing of a valve is important for correct system operation. An undersized valve will not have sufficient capacity at maximum load. An oversized valve may initiate cycling, and the seat and throttling plug may be damaged because of the restricted opening. Correct sizing of the control valve for actual expected conditions is considered essential for good control. Some variables which must be determined are: The water and 50% water-glycol solutions, are the controlled mediums. The pressure differential that will exist across the valve under maximum load demand. The maximum capacity the valve must deliver. The maximum line pressure differential that the valve actuator must close against. See Tables 2 through 3, and Figure 1 for valve capacities and sizing selection. 6/10 High Pressure 2-way 2 1/2-6 Globe Valves
Two-Way Valve Construction Figure 3. Two-Way Normally Closed Figure 4. Two-Way Normally Open High Pressure 2-way 2 1/2-6 Globe Valves 7/10
Service Kits Table 5. Rebuild/Repack Service Kits Part Numbers. Action / Valve Size Inch (mm) ANSI Class 125 Valve No. ANSI Class 250 Valve No. Kit No. NO 2-1/2 (65), = % VA-599-06610 VA-599-06620 VA-599-09250 NO 3 (85), = % VA-599-06611 VA-599-06621 VA-599-09251 NO 4 (100), = % VA-599-06612 VA-599-06622 VA-599-09252 NO 5 (125), = % VA-599-06613 VA-599-06623 VA-599-09253 NO 6 (150), = % VA-599-06614 VA-599-06624 VA-599-09254 NC 2-1/2 (65), = % VA-599-06615 VA-599-06625 VA-599-09255 NC 3 (85), = % VA-599-06616 VA-599-06626 VA-599-09256 NC 4 (100), = % VA-599-06617 VA-599-06627 VA-599-09257 NC 5 (125), = % VA-599-06618 VA-599-06628 VA-599-09258 NC 6 (150), = % VA-599-06619 VA-599-06629 VA-599-09259 Dimensions Figure 5. Dimensions. Note: See Table 6 for actuator and recommended service envelope dimensions and Table 7 for actual valve dimensions. 8/10 High Pressure 2-way 2 1/2-6 Globe Valves
Table 6. Dimensions of the Actuator and Recommended Service Envelope. Dimensions in Inches (Millimeters) Actuator VA-1K0GSX024P with handle closed Actual Height of Actuator H1 Service Height H Actual Width or Diameter of Actuator W1 14-3/4 (375) 22-3/4 (578) 7 (178) width 8-15/16 (226) depth VA-250GSX024P 11-13/16 (300) 19-3/4 (500) 6-5 (127) width 6-5/8 (169) depth 25 (635) Service Width W 14-1/2 (360) Table 7. Valve Dimensions and Weight. Valve Action Nominal Valve Size inches (mm) ANSI Class 125 ANSI Class 250 Dimensions in Inches (mm) Weight Dimensions in Inches lbs. (kg) A B C A B C Weight lbs.(kg) Normally Open 2-1/2 (65) 11 (281) 11 (281) 4-7/8 (123) 62 (28) 11-1/2 (292) 11 (281) 5 (123) 78 (35) 3 (80) 11-3/4 (299) 12-1/4 (312) 5-5/16 (135) 76 (34) 12-1/2 (318) 12-1/4 (312) 5-5/16 (135) 102 (46) 4 (100) 13-7/8 (352) 13-9/16 (345) 6-5/16 (160) 124 (56) 14-1/2 (368) 13-5/8 (344.7) 6-5/16 (160) 165 (75) 5 (125) 15-3/4 (400) 15-3/16 (385) 7 (177) 155 (70) 16-5/8 (422) 15-3/16 (385) 7 (177) 215 (97) 6 (150) 17-3/4 (451) 16-3/4 (426) 7-7/8 (200) 212( 96) 18-5/8 (473) 16-3/4 (426) 8 (200) 312 (142) Normally Closed 2-1/2 (65) 10-7/8 (276) 10-5/8 (269) 4-7/8 (125) 58 (26) 11-1/2 (292) 11 (279) 5-3/8 (135) 76 (35) 3 (80) 11-3/4 (299) 11-15/16 (303) 5-5/8 (142) 75 (34) 12-1/2 318) 12-7/16 (315) 6 (154) 101 (45) 4 (100) 13-7/8 (352) 13-15/16 (354) 6-5/8 (168) 123 (56) 14-1/2 (368) 14-3/8 (364) 7 (178) 164 (74) 5 (125) 15-3/4 (400) 15-1/4 (388) 7-1/2 (185) 153 (69) 16-5/8 (422) 15-3/4 (399) 7-3/4 (196) 214 (97) 6 (150) 17-3/4 (451) 17-1/16 (433) 8-3/16 (207) 209 (95) 18-5/8 (473) 17-1/2 (444) 8-5/8 (218) 309 (141) High Pressure 2-way 2 1/2-6 Globe Valves 9/10
Specifications subject to change without notice. Distech Controls, and the Distech Controls logo are trademarks of Distech Controls Inc. All other trademarks are property of their respective owner., Distech Controls Inc., 2015. All rights reserved. 10/10 HP 2-Way 2.5-6 Globe Valves_DS_12_EN