Sensotronic 8pp:Layout 1 20/6/08 11:53 AM Page I Intelligence Moves GRASS Sensotronic Program July 2008
Sensotronic 8pp:Layout 1 20/6/08 11:53 AM Page 2 Grass Sensotronic The Concept The beauty of ergonomics Ergonomics is the trend, just like simple handle-free furniture fronts. Grass Sensotronic supports both of these trends. Drawers, pull-outs and interior pull-outs open and close in response to a gentle tap, they move different loads of up to 70kg, uniformly open and shut at the set speed. And the drawers think with you: they sense resistance and stop, avoid collisions amongst themselves and protect against injuries. Intelligence moves. And yet it s so simple. In installation and operation alike. Sensotronic performance features The drawer can be opened by tapping or pulling; a gentle nudge is sufficient The drawer is closed by tapping Tapping determines the direction of travel, the drawer automatically performs the movement - no effort is required (in contrast, electromechanical soloutions do not have power assisted closure) Can be used with or without handle (the drawer reacts in accordance with the application) Blockage recognition over the entire distance - in both directions Anti-collision protection (no collision of drawers e.g. in the case of diagonal corners); drawers can communicate with one another Drawer follows a speed profile: Uniform opening and closing speed irrespective of drawer weight Transport-assisted solution (heavy loads are moved by a drive over the entire distance in both directions) Soft stop at end position: When opened, the drawer moves softly into its end position Cushioned closure: Drawer closes softly Optimal side stability Interior pull-out logic: Interior pull-out stops before reaching the extended pull-out and can be closed again by tapping the pull-out Position initialisation: Depth adjustment for perfectly aligned fronts The intelligence of Grass Sensotronic leads to unique convenient functions such as end-position dampening, interior drawer logics, or the load-independent travel profile. Drawers and pull-outs with Grass Sensotronic open and close electronically. Silent, harmonious, and above all: intelligent. The jam protection feature also makes Grass Sensotronic exceptional. And your furniture even more valuable. Grass Sensotronic prevents possible collisions and damage to the decor. 2 HAA GS08 www.hafele.com
Sensotronic 8pp:Layout 1 20/6/08 11:53 AM Page 3 Grass Sensotronic System Description 1 The cabinet member Each cabinet member is equipped with a drive which determines the speed profile and the opening length. In addition, the drive reacts to blockages, pressure, pulling etc. Lengths range from NL 270 to 650 mm. From nominal length 400 mm upwards, cabinet members can bear a load of 70kg. The screw position remain the same as for the standard Nova Pro cabinet member. As the drive is fitted to the rear end of the cabinet member, an additional installation depth of 79 mm is required. Inside cabinet depth: nominal length + 79 mm. The depth of the left and right-hand cabinet members can be adjusted on the respective cabinet member in order to achieve properly aligned fronts. Note: 90 mm high Nova Pro drawer sides and front hooks must be ordered separately (Sensotronic can only be used with 90 mm drawer sides.) 2 The drive shaft The drive shaft synchronises the lefthand with the right-hand cabinet member. The rigid connection ensures perfect side stability - even in the case of wide pull-out. If necessary, the drive shaft can be cut to size for special widths. Drive shaft connectors must be ordered separately. The wiring 3 Vertical cable Every drawer requires a vertical cable to supply power to the cabinet member drive. It connects a power supply unit and / or distributor with the first cabinet member and each cabinet member with the next within a cabinet. 4 Horizontal cable A horizontal cable connects one cabinet with the next. It starts from the power supply unit and runs to the adjacent distributors, then on to the next distributor in each cabinet. 5 Power cord The power cord is approx. 2 m in length. 6 The power supply unit The power supply unit (approval No. N17697) is required to supply Sensotronic with power. It contains the busmaster and thus the system intelligence. For up to 22 drawers you will only need one power supply unit. If you wish to use more drawers, you will need another unit. To prevent a noticeable drop in power, the greatest distance between the power supply unit and any one cabinet member should not exceed 5 metres. An installation height (must be installed in an upright position) of 23 cm is to be envisaged. 7 The distributor You will need one distributor in each cabinet where there is no power supply unit. The distributor is used on the one hand to serve all the cabinet members in the cabinet and on the other to connect the horizontal cable to the next cabinet / distributor. 8 The dongle Once the kitchen has been installed, the system has to be configured Configuration turns the standard kitchen into a convenient and intelligent kitchen. The dongle is required for this operation. It is a kind of electronic key which is provided with every kitchen and which tells the busmaster that the configuration is being performed is plugged into a vacant slot in the horizontal wiring (power supply unit or distributor) during this operation and the removed again afterwards makes configuration possible for anyone HAA GS08 www.hafele.com 3
Sensotronic 8pp:Layout 1 20/6/08 11:53 AM Page 4 Grass Sensotronic Runners Drawer Length, mm 40 kg Runners 270 553.00.627 300 553.00.630 350 553.00.635 Packing: 1 and 4 pairs Drawer Length, mm 70 kg Runners 400 553.01.640 450 553.01.645 500 553.01.650 550 553.01.655 600 553.01.660 650 553.01.665 Packing: 1 and 4 pairs Note: Can only be used with 90 mm high Nova Pro drawer sides. Drawer sides and front hooks need to be ordered separately (please refer to Grass Drawer Program catalogue for ordering details.) Driveshafts & Connectors Driveshaft Driveshaft to suit cabinet width mm (16 mm side panels) 16 mm side panels 600 553.00.105 800 553.00.106 900 553.00.107 1000 553.00.108 1200 553.00.109 Packing: 1 and 10 pieces Driveshaft connector Driveshaft Connector 553.00.100 Packing: 1 and 10 pieces Note: One driveshaft and two driveshaft connectors are required per drawer. 4 HAA GS08 www.hafele.com
Sensotronic 8pp:Layout 1 20/6/08 11:53 AM Page 5 Grass Sensotronic Wiring Vertical Wiring Cable Length, mm 200 553.00.111 250 553.00.112 350 553.00.113 450 553.00.114 650 553.00.115 Note: One vertical cable is required for each drawer. Horizontal Wiring Cable Length, mm 900 553.00.121 1200 553.00.122 1500 553.00.123 3000 553.00.125 Note: Horizontal cabling is only required to join between the power supply unit and distribution units. Additional Electrical Components Component Power Supply Unit (Approval No. N17697) 553.00.130 Note: One Power Supply Unit can operate up to 22 drawers Power Supply Unit Distributor Unit Component Distributor Unit 553.00.140 Note: One Distributor Unit required for each cabinet that does not contain a Power Supply Unit Programming Dongle Component Programming Dongle 553.00.150 Note: One Programming Dongle required per order Component Power Cable (image not shown) 553.00.199 Note: One Power Cable required for each Power Supply Unit HAA GS08 www.hafele.com 5
Sensotronic 8pp:Layout 1 20/6/08 11:53 AM Page 6 Grass Sensotronic Cabinet Planning Notes on the electronics The power supply unit The power supply unit should be placed near a power outlet (power cord length approx. 2 m). Please note the range of the power supply unit of approx. 5 m and the number of cabinet members which can be connected (see System Description, page 3). If separate cabinet blocks are planned (e.g. cooker island), one power supply unit per cabinet block is recommended. For safety reasons, the power supply unit must not be fitted beneath a sink. An installation height (must be fitted upright) of 23 cm is to be provided. Mains connection: Voltage supply: 90-240V Mains frequency: 50 / 60 Hz Max. output: 240W Other notes Neither the drawer nor the cabinet member is energised. All live parts are fully enclosed and inaccessible. In the event of a power outage, the drawers can be opened and closed conventionally. Needless to say, all the data entered when configuring the system are retained in the case of a power outage. Operating conditions: Temperature: +/- 0º to +50 ºC Humidity: 15% to 90% Notes for cabinet planning Provide switchable power outlets (e.g. to allow the user to switch the system off when going on holiday or cleaning the drawers). Required inside cabinet depth: NL + 79 mm. Use Sensotronic for modern furniture planning and incorporate fronts which are flush with the cabinet sides. Determine the depth of the cabinet sides on the basis of the front thickness used and the largest front gap defined for the cabinet. Front gap with Sensotronic To ensure reliable activation when opening the drawer by tapping, an activation distance of 3 mm is required. This gives a front gap (space between drawer front and front edge of cabinet) of 3 mm. The activation zone encompasses the full width of the front. Depending on the stability of the pullout and/or the rigidity of the front, it will be possible to tap at different heights with a front gap of this size. Front buffers will enlarge the front gap. The drawer The screw positions of the cabinet member are the same as on the standard Nova Pro cabinet member. Special applications where there is resistance for either the opening or closing operation cannot be used with the standard software (e.g. waste disposal pull-outs with lift-up lid, some plinth drawers, backward sloping slides, etc.). 6 3 2 7 4 1 2 3 8 5 6 HAA GS08 www.hafele.com
Sensotronic 8pp:Layout 1 20/6/08 11:53 AM Page 7 The manual push to open solution for drawers and interior pull-outs REFER TO THE HÄFELE GRASS DRAWER PROGRAM CATALOGUE FOR ORDERING DETAILS The handle free solution for hinged doors REFER TO THE COMPLETE HÄFELE 2007/2008 CATALOGUE FOR ORDERING DETAILS (CATALOGUE PAGE 3.60 ONWARDS) HAA GS08 www.hafele.com 7
Sensotronic 8pp:Layout 1 20/6/08 11:53 AM Page 8 HÄFELE AUSTRALIA PTY. LTD. STATE OFFICES DESIGN CENTRES Victoria - Head Office - 8 Monterey Road, South Australia Melbourne Design Centre Brisbane Design Centre (P.O. Box 1066) Dandenong VIC 3175 21 Chesser Street, Adelaide SA 5000 Lvl 1, 75-77 Flinders Lane, Melbourne VIC 3000 1 Breakfast Creek Road, Newstead QLD 4006 Telephone: (03) 9212 2000 Telephone: (08) 8232 9933 Telephone: (03) 9212 2000 Telephone: (07) 3344 1533 Telefax: (03) 9212 2001 Telefax: (08) 8232 9977 Telefax: (03) 9652 3701 Telefax: (07) 3253 3701 info@hafele.com.au sa@hafele.com.au info@hafele.com.au qld@hafele.com.au New South Wales 10 Forsyth Close, Wetherill Park NSW 2164 Telephone: (02) 8788 2200 Telefax: (02) 8788 2201 nsw@hafele.com.au Australian Capital Territory Unit 12, 71 Leichhardt Street, Kingston ACT 2604 Telephone: 1800 806 307 Telefax: (02) 6295 9211 act@hafele.com.au Sydney Design Centre 17-19 Pyrmont Bridge Road, Pyrmont NSW 2009 Telephone: (02) 8788 2200 Telefax: (02) 9692 0711 nsw@hafele.com.au Hobart Design Centre 309 Liverpool Street, Hobart TAS 7000 Telephone: (03) 6331 7106 Telefax: (03) 6334 6414 tas@hafele.com.au Queensland 12 Selhurst Street, Coopers Plains QLD 4108 Telephone: (07) 3344 1533 Telefax: (07) 3344 1770 qld@hafele.com.au Tasmania 262 York Street, Launceston TAS 7250 Telephone: (03) 6331 7106 Telefax: (03) 6334 6414 tas@hafele.com.au Newcastle Design Centre Unit 1, 47 Bolton Street, Newcastle NSW 2300 Telephone: (02) 8788 2200 Telefax: (02) 4921 0901 nsw@hafele.com.au Western Australia/N.T Freecall 1800 806 307 for all 29-33 Juna Drive, Malaga WA 6090 customers in country regions Telephone: (08) 9249 3833 and ACT Telefax: (08) 9249 3328 wa@hafele.com.au www.hafele.com HAA GS08