MIL OWN N OPRT SIN 1933 ou an t uy etter Reel azmat Situations Vehicular xtrications t-the-scene mergencies reathing and Utility ir pplications www.hannay.com Pride in workmanship Reels built to order onsistent quality Service with integrity Value for your dollar
Our uarantee and Service Policy quipment manufactured by annay Reels, Inc. is guaranteed for two years from date of shipment when installed according to our instructions, given proper care, and used for the purpose for which it is designed. quipment which proves to be defective upon our inspection will be replaced free of charge, including freight to the customer. Our responsibility ceases upon delivery to any common carrier and we do not, unless previously instructed, insure shipments beyond point of delivery to such carrier. No material will be accepted for return without a return goods authorization. No allowance will be made for labor charges incurred in making exchanges, replacements or repairs. omponents (including hose and cable) which are manufactured by other vendors will be subject to the warranty terms of their own manufacturers. lso excluded from the general guarantee are normal wear items (including seals, motor brushes, and paint finish). We reserve the right to modify or alter materials, dimensions, design and construction when necessary to improve the performance of the reel and/or accessories, or to meet delivery requirements. ailure to use a properly sized circuit breaker with any electric rewind motor will void warranty on motor. ailure to use a flexible connector with any live hose reel will void warranty on swivel joint. We expressly disclaim any liability for damage or injuries resulting from the use, operation, service, maintenance or failure of equipment. Paint Notice Standard finish on annay reels is a high performance modified acrylic enamel paint. Standard color is metallic graphite. Other colors available at no additional cost include red, white, black, and primer. Most of the major components on standard reels are e-coated prior to receiving final topcoat paint finish. This combination of e-coat and enamel topcoat will meet the finish requirements of most customer applications and environments. In cases where requirements cannot be met with the standard finish, annay Reels can coat any model reel with an automotive primer, allowing application of final coating at your facility. lternatively, annay Reels can provide a quote for matching a customer-provided paint specification. or further information, please contact your annay Reels sales engineer and a special paint request form will be sent to you. or environments where no paint finish is suitable, we offer both aluminum and stainless steel (304 grade) construction on most reel models. Return oods Policy ll annay Reels are built to order. The parts and components are ordered or placed into production as soon as the order is written. In order to keep the number of returned goods at a minimum, we ask you use the annay Reels Order Worksheet and /or ccessories Order orm when specifying reels with us. These forms can be found on pages 8 and 16 of this catalog. e sure to include any size and /or weight limitations for your installation. In the event that an item does need to be returned for credit, repair or replacement, prior approval must be obtained from annay Reels, Inc. Upon your request, we will fax a Return oods uthorization form. signed copy of this form must accompany the material when returned to us. ll material must be returned prepaid, unless otherwise noted on our Return oods uthorization. No return will be accepted that has been damaged due to improper return packaging, tampered with or altered from its original condition. quipment specially built to customer specifications and requirements is not subject to cancellation or returnable for credit under any conditions. Our restocking and handling fee is a MINIMUM of 25% for standard catalog reels and parts. No material will be accepted for credit when returned without permission. Orders for equipment incorporating variations from catalog listed items are special and are not subject to return. No allowance will be made for labor or mileage charges incurred in making exchanges, replacements, or repairs. 1-800-RLIN (733-5464) US or 518-797-3259 (International) www.hannay.com reels@hannay.com
annay s Rescue Reels come to the rescue in emergency situations. In rescue operations, response time can save lives because a few seconds lost can make all the difference. With annay s rescue reels by your side, you ll be able to respond quickly, safely, and efficiently. So when every second counts, don t waste any time fighting with your hose or power cable. The rugged 1500 series hose reel is ideal for utility air (or breathing air when specified). The 1600 series reel handles live electric cable and is invaluable when you need power at the scene of an emergency. The reels from the 2000, 2200, and 2500 series are all dual hose reels unsurpassed in rescue situations that require hydraulic hose for power tools such as cutters, spreaders, or jacks. Rescue and emergency operations are never easy jobs. ou can rely on annay s rescue reels to never fail you when the pressure is on. To order any annay reel in this catalog, use the specifications listed here in conjunction with our Ordering ccessory uide. Summary of Standard and Optional eatures for Rescue Reels Series 1500 12V Motor (with switch, solenoid) 1/2 NPT outlet riser 1/2 NPT inlet swivel Utility ir Service Steel construction, raphite Paint inish ommon Options 24V Motor (with switch, solenoid) 3/8 or 1/4 outlet riser reathing ir Service (up to 6,000 psi with SST internals) Polished SST/hrome inish ose uide Rollers ose & ose Stop Installed Model Prefixes (Standard rame, Utility ir) L (Standard rame, Low-Pressure reathing ir) (Standard rame, igh-pressure reathing ir) L (Low eight, Utility ir) LL (Low eight, Low-Pressure reathing ir) L (Low eight, igh-pressure reathing ir) S (Min epth, Utility ir) SL (Min epth, Low-Pressure reathing ir) S (Min epth, igh-pressure reathing ir) Series R1600 12V Motor (with switch, solenoid) 3-conductor slip ring Steel construction, raphite Paint inish ommon Options 24V Motor (with switch, solenoid) 4-conductor or higher slip ring Polished SST/hrome inish able uide Rollers able, Plug & able Stop Installed Series 2000 12V Motor (with switch, solenoid) Outlet risers provided per specified tool manufacturer 1/4 NPT inlet swivel Steel construction, raphite Paint inish ommon Options 24V Motor (with switch, solenoid) Polished SST/hrome inish ose uide Rollers Twin ose & ose Stop Installed Model Prefixes R (Standard rame, Live ord) LR (Low eight, Live ord) SR (Min epth, Live ord) Model Prefixes 2000 (Standard rame, Twin ydraulic) L2000 (Low eight, Twin ydraulic) S2000 (Min epth, Twin ydraulic) 2200 (olmatro OR ose Only) 2500 (Narrow rame, Twin ydraulic) 1-800-RLIN (733-5464) US or 518-797-3259 (International) www.hannay.com reels@hannay.com 1
S R I S OR UTILIT OR RTIN IR OS To handle 1/4'', 3/8'' and 1/2'' I.. hose. hoose permanent crank rewind or chain & sprocket drive powered by an electric or compressed air motor. Spring actuated pinlock, adjustable cam-lock drag brake on crank rewind models. **90 ball bearing swivel joint, 1/2'' female NPT threads. **Outlet 1/2'' female NPT threads. Other sizes/threads can be furnished and must be specified. Rollers and roller mounting brackets are accessory items. Specify roller position. Standard finish is oven-cured enamel. Polished stainless steel discs and sprocket with chrome frame extra cost. and L1500 reels pressures to 3000 psi (207 bar) 1500 reels pressures up to 6000 psi (414 bar). Tem per atures from +20 to +400 ( 7 to +204 ). Parts rawing ISO 90 Model ose apacity of Reel pprox. Weight Reel imensions*** Number feet rank Rewind inches m. lb. mm. NOT 1 inch = 25.4 mm P=igh Pressure breathing air hose kg. or Power Rewind See Note 3 2 I.. (in) 1/4" 3/8" 1/2" I.. (mm) 6 10 13 O.. (in) 5/8" 1/2" P 3/4" 21/32" P 7/8" NT SIP O.. (mm) 16 13 P 19 17 P 22 RNK POWR RNK POWR 1514-17-18 175 300 125 175 75 27 53* 11 6 16.5 19 19 17.25 9.5 53 91 38 53 23 12 24 279 152 419 483 483 483 241 1516-17-18 250 400 175 250 125 28 55* 13 8 16.5 19 21 19.25 11.5 76 122 53 76 38 13 25 330 203 419 483 533 489 292 1520-17-18 350 600 275 400 175 29 65* 17 12 16.5 19 25 23.25 15.5 107 183 84 122 53 13 29 432 305 419 483 635 591 394 1. Upon request, reels can be supplied with drum lengths other than shown and with disc sizes in other diameters. 2. Weights shown in chart are for manual rewind models. dd these amounts for power rewind models. Net (lbs.) Ship (lbs.) Net (kg.) Ship (kg.) lectric 18 18 8.2 8.2 ir 15 15 6.8 6.8 3. When ordering power rewind models, prefix model number with: = ir Rewind = lectric Rewind (ir rewind reels are supplied with control valve and 18" air hose; 12V and 24V rewind reels are supplied with switch and solenoid.) 4. Model esignations: 1500 = Utility ir pplications L1500 = Low-Pressure reathing ir pplications 1500 = igh-pressure reathing ir ascade Systems for example: L1514-17-18=lectric Rewind, Low-Pressure reathing ir. 5. dd 2-1/2" to "" dim and 1/2" to "" dim with ssy "" Roller installed in top wind (TR) position. 6. Manual rewind available in RT or L configurations only. 7. e sure to check dimensions and weights prior to ordering. 8. Some roller options may prohibit the use of our molded chain guard NOTI: lexible onnector must be used between the inlet pipe and the inlet swivel joint. *imensional weight applies when shipped as a parcel package (via edx or UPS round) **Stainless steel required for breathing air applications. ***x,y indicate mounting holes 10 254 14.5 368 18.12 460 9.88 251 Optional hose package Shown Optional xternal Mounting rackets part no. 9906.0025 dd 2-1/2" to the dimension shown in the chart. 1-800-RLIN (733-5464) US or 518-797-3259 (International) www.hannay.com reels@hannay.com 6 152
S R I S L1500 shown hoose an L Model when eight of reel must be minimized S1500 shown hoose an S Model when epth of reel must be minimized Parts rawing ISO 227 (L1500); ISO 228 (S1500) OR UTILIT OR RTIN IR OS To handle 1/4'', 3/8'' and 1/2'' I.. hose. hain and sprocket drive powered by an electric gear motor. **90 swivel joint with 1/2" female NPT threads. **Outlet 1/2" female NPT thread. Other sizes/threads can be furnished and must be specified. Standard finish is oven-cured enamel. L and S1500 reels pressure to 3000 psi (207 bar). LL and SL1500 reels pressure to 3000 psi (207 bar) and use SST internals for breathing air. L and S1500 reels pressure to 6000 psi (414 bar) and use SST internals for high-pressure breathing air. Tem per atures from +20 to +400 ( 7 to +204 ). Model ose apacity of Reel pprox. Weight Reel imensions*** Number feet Power Rewind inches m. lb. mm. NOT 1 inch = 25.4 mm P=igh Pressure breathing air hose kg. I.. (in) 1/4" 3/8" 1/2" I.. (mm) 6 10 13 O.. (in) 5/8" 1/2" P 3/4" 21/32" P 7/8" NT SIP O.. (mm) 16 13 P 19 17 P 22 L1514-14-16 100 175 75 100 50 39 55* 11.5 6 6 15.5 20 15.25 14.5 7.5 5.75 11.75 31 53 23 30 15 18 25 292 152 152 394 508 386 368 191 146 298 L1516-14-16 150 250 100 150 75 41 55* 13.5 8 6 15.5 20 17.25 14.5 7.5 7.75 11.75 46 76 31 46 23 19 25 343 203 152 394 508 437 368 191 197 298 L1520-14-16 225 400 175 200 100 45 68* 17.5 12 6 15.5 20 21.25 14.5 7.5 9 11.75 69 122 53 61 31 20 31 445 305 152 394 508 538 368 191 229 298 S1514-14-16 100 175 75 100 50 42 70* 11.63 6 6 11.5 14 15.25 20.5 13.5 5.75 7.75 31 53 23 30 15 19 32 295 152 152 292 356 386 521 343 146 197 S1516-14-16 150 250 100 150 75 44 70* 13.63 8 6 11.5 14 17.25 20.5 13.5 7.75 7.75 46 76 31 46 23 20 32 346 203 152 292 356 437 521 343 197 197 S1520-14-16 225 400 175 200 100 48 70* 17.63 12 6 11.5 14 21.25 20.5 13.5 9 7.75 69 122 53 61 31 22 32 448 305 152 292 356 538 521 343 229 197 L1500 1. Upon request, reels can be supplied with drum lengths other than shown. 2. 12V and 24V rewind reels supplied with switch and circuit breaker. 3. Model esignations: L or S = Utility ir pplications LL or SL = Low-Pressure reathing ir pplications L or S = igh-pressure reathing ir ascade Systems 1-800-RLIN (733-5464) US or 518-797-3259 (International) www.hannay.com reels@hannay.com 3 S1500 4. e sure to check dimensions and weights prior to ordering. NOTI: lexible onnector must be used between the inlet pipe and the inlet swivel joint. * imensional weight applies when shipped as a parcel package (via edx or UPS round). ** Stainless steel required for breathing air applications. ***x,y indicate mounting holes
S R I S OR ON-SIT US To handle live electric cable. hoose removable crank rewind or chain & sprocket drive powered by an electric or compressed air motor. djustable cam-lock brake on crank rewind models. 3 conductor 45 amp collector assembly with #8 gauge wiring. onsult factory for additional conductors available at extra cost. Rollers and roller mounting brackets are accessory items. Specify roller position. Standard finish is oven-cured enamel. Optional cable package shown Parts rawing ISO 76 Model able apacity of Reel pprox. Weight Reel imensions*** Number feet rank Rewind inches m. lb. mm. NOT 1 inch = 25.4 mm kg. or Power Rewind See Note 3./NO. O ONUTORS 12/3 10/3 12/4 10/4 O.. (in).600.690.670.750 NT SIP O.. (mm) 15 18 17 19 RNK POWR RNK POWR R1614-17-18 175 100 100 100 30 53* 11 6 16.5 19 21.75 17.5 9.5 53 30 30 30 14 24 279 152 419 483 552 445 241 R1616-17-18 200 150 150 150 32 55* 13 8 16.5 19 23.75 19.5 11.5 61 46 46 46 15 25 330 203 419 483 603 495 292 R1618-17-18 275 200 200 200 33 65* 15 10 16.5 19 25.75 21.5 13.5 84 61 61 61 15 29 381 254 419 483 654 546 343 R1620-17-18 350 250 250 225 34 65* 17 12 16.5 19 27.75 23.5 15.5 107 76 76 69 15 29 432 305 419 483 705 597 394 R1622-17-18 400 300 300 275 35 80* 19 14 16.5 19 29.75 25.5 17.5 122 91 91 84 16 36 483 356 419 483 756 648 445 1. Upon request, reels can be supplied with drum lengths other than shown and with disc sizes in other diameters. 2. Weights shown in chart are for manual crank rewind models. dd these amounts for power rewind models. Net (lbs.) Ship (lbs.) Net (kg.) Ship (kg.) lectric 18 18 8.2 8.2 ir 15 15 6.8 6.8 3. When ordering power rewind models, prefix model number with: = ir Rewind = lectric Rewind (ir rewind reels are supplied with control valve and 18" air hose; 12V and 24V rewind reels are supplied with switch and solenoid.) 4. or reels with 4 cond. 45 amp collector assy s, add 2 to dimension. 5. dd 2-1/2" to "" dim and 1/2" to "" dim with ssy "" Roller installed in top wind (TR) position. 6. e sure to check dimensions and weights prior to ordering. 7. Some roller options may prohibit the use of our molded chain guard. *imensional weight applies when shipped as a parcel package (via edx or UPS round) ***x,y indicate mounting holes Optional xternal Mounting rackets part no. 9906.0025 dd 2-1/2" to the dimension shown in the chart. 6 152 able Selections 18.12 460 9.88 251 Power/ontrol able 10 254 14.5 368 Wire Size (W)/ onductors rea (Per onductor) irc. mils sq. mm 14/3 4100 2.1 12/3 or 12/4 6500 3.3 10/3 or 10/4 10,500 5.3 onnector Options Straight lade Twist Lock (3 or 4 blade available) (3 or 4 blade available) Straight blade or twist lock connectors and plugs can be supplied. e sure to specify amperage, voltage, and NM designation. 4 1-800-RLIN (733-5464) US or 518-797-3259 (International) www.hannay.com reels@hannay.com
S R I S LR1600 shown hoose an LR Model when eight of reel must be minimized OR ON-SIT US To handle live electric cable. hain and sprocket drive powered by an electric gear motor. 3 conductor 30 amp collector assembly with #10 gauge wiring. 4 conductor can be specified as an option. Standard finish is oven-cured enamel. SR1600 shown hoose an SR Model when epth of reel must be minimized Parts rawing ISO 229 (LR1600); ISO 230 (SR1600) Model able apacity of Reel pprox. Weight Reel imensions*** Number feet Power Rewind inches m lb. mm. kg../no. O ONUTORS 12/3 10/3 12/4 10/4 O.. (in).6".69".67".75 NT SIP O.. (mm) 15 18 17 19 LR1616-14-16 150 100 100 100 42 55* 13.5 8 6 15.5 20 16.3 14.5 7.5 7.75 11.75 46 31 31 31 19 24 343 203 152 394 508 413 368 191 197 298 LR1618-14-16 200 125 125 125 43 55* 15.5 10 6 15.5 20 18.3 14.5 7.5 7 11.75 61 38 38 38 20 25 394 254 152 394 508 464 368 191 178 298 LR1620-14-16 250 175 175 150 44 68* 17.5 12 6 15.5 20 20.3 14.5 7.5 9 11.75 76 53 53 46 20 31 445 305 152 394 508 514 368 191 229 298 LR1622-14-16 200 200 175 45 68* 19.5 14 6 15.5 20 22.3 14.5 7.5 11 11.75 61 61 53 20 31 495 356 152 394 508 565 368 191 279 298 SR1616-14-16 150 100 100 100 44 70* 13.5 8 6 11.5 14 16.3 20.5 13.5 7.75 7.75 46 31 31 31 20 32 346 203 152 292 356 413 521 343 197 197 SR1618-14-16 200 125 125 125 46 70* 15.5 10 6 11.5 14 18.3 20.5 13.5 7 7.75 61 38 38 38 21 32 397 254 152 292 356 464 521 343 178 197 SR1620-14-16 250 175 175 150 47 70* 17.5 12 6 11.5 14 20.3 20.5 13.5 9 7.75 76 53 53 46 21 32 448 305 152 292 356 514 521 343 229 197 SR1622-14-16 200 200 175 48 70* 19.5 14 6 11.5 14 22.3 20.5 13.5 11 7.75 61 61 53 22 32 499 356 152 292 356 565 521 343 279 197 LR1600 SR1600 1. Upon request, reels can be supplied with drum lengths other than shown. 2. 12V and 24V rewind reels supplied with switch circuit breaker. 3. e sure to check dimensions and weights prior to ordering. * imensional weight applies when shipped as a parcel package (via edx or UPS round). ***x,y indicate mounting holes 1-800-RLIN (733-5464) US or 518-797-3259 (International) www.hannay.com reels@hannay.com 5
S R I S OR POWR RSU TOOLS To handle dual hydraulic 1/4'' I.. hose. hoose manual disc rewind or chain and sprocket drive powered by an electric or compressed air motor. djustable cam-lock brake on disc rewind models. 90 swivel joints with 1/4'' female NPT threads. Rescue tool manufacturer must be specified to determine threads required and to determine packing material required. Rollers and roller mounting brackets are accessory items. Specify roller position. Pressures to 10,500 psi (724 bar) Temperatures from 20 to +225 ( 29 to +107 ). Standard finish is oven-cured enamel. Polished stainless steel discs and sprocket with chrome frame are recommended for phosphate ester oil. Optional hose package shown WIT Lead-ins arrying handles extra cost. (dd 2 inches to dimension) Parts rawing ISO 101 Model ose apacity of Reel pprox. Weight Reel imensions*** Number feet isc Rewind inches m. lb. mm. NOT 1 inch = 25.4 mm kg. or Power Rewind See Note 3 I.. (in) 1/4" I.. (mm) 6 O.. (in).53 NT SIP O.. (mm) 13.5 IS POWR IS POWR 2016-17-18 2/100 32 65* 13 8 16.5 19 17.5 20.5 11.5 2/31 15 29 330 203 419 483 445 521 292 2020-17-18 2/200 34 80* 17 12 16.5 19 21.5 24.5 15.5 2/61 15 36 432 305 419 483 546 622 394 1. Upon request, reels can be supplied with drum lengths other than shown and with disc sizes in other diameters. 2. Weights (lbs.) shown in chart are for manual rewind models. dd these amounts for power rewind models. Net (lbs.) Ship (lbs.) Net (kg.) Ship (kg.) lectric 18 18 8.2 8.2 ir 15 15 6.8 6.8 3. When ordering power rewind models, prefix model number with: = ir Rewind = lectric Rewind (ir rewind reels are supplied with control valve and 18" hose; 12V and 24V rewind reels are supplied with switch and solenoid.) 4. dd 2-1/2" to "" dim and 1/2" to "" dim with ssy "" Roller installed in top wind (TR) position. 5. e sure to check dimensions and weights prior to ordering. 6. Some roller options may prohibit the use of our molded chain guard. NOTI: lexible onnector must be used between the inlet pipe and the inlet swivel joint. *imensional weight applies when shipped as a parcel package (via edx or UPS round) ***x,y indicate mounting holes 6 152 18.12 460 9.88 251 10 254 Optional xternal Mounting rackets part no. 9906.0025 dd 2-1/2" to the dimension shown in the chart. 14.5 368 6 1-800-RLIN (733-5464) US or 518-797-3259 (International) www.hannay.com reels@hannay.com
S R I S L2000 shown hoose an L Model when eight of reel must be minimized S2000 shown hoose an S Model when epth of reel must be minimized OR POWR RSU TOOLS To handle dual hydraulic 1/4'' I.. hose. hain and sprocket drive powered by an electric gear motor. 90 swivel joint with 1/4" female NPT threads. Rescue tool manufacturer must be specified to determine threads. Standard finish is oven-cured enamel. Pressures to 10,500 psi (724 bar). Tem per atures from -20 to +225 ( 29 to +107 ). Parts rawing ISO 227 (L2000); ISO 228 (S2000) Model ose apacity of Reel pprox. Weight Reel imensions*** Number feet Power Rewind inches m. lb. mm. NOT 1 inch = 25.4 mm kg. I.. (in) 1/4" I.. (mm) 6 O.. (in) 17/32" NT SIP O.. (mm) 13.5 L2016-14-16 2/100 44 55* 13.5 8 6 15.5 20 15.75 14.5 7.5 7.75 11.75 2/31 20 25 343 203 152 394 508 400 368 191 197 298 L2022-14-16 2/200 49 68* 19.5 14 6 15.5 20 21.75 14.5 7.5 11 11.75 2/61 22 31 495 356 152 394 508 552 368 191 279 298 S2016-14-16 2/100 47 70* 13.63 8 6 11.5 14 15.75 20.5 13.5 7.75 7.75 2/31 21 32 346 203 152 292 356 400 521 343 197 197 S2022-14-16 2/200 52 70* 19.63 14 6 11.5 14 21.75 20.5 13.5 11 7.75 2/61 24 32 499 356 152 292 356 552 521 343 279 198 L2000 S2000 1. Upon request, reels can be supplied with drum lengths other than shown. 2. 12V and 24V rewind reels supplied with switch and circuit breaker. 3. e sure to check dimensions and weights prior to ordering. NOTI: lexible onnector must be used between the inlet pipe and the inlet swivel joint. * imensional weight applies when shipped as a parcel package (via edx or UPS round) ***x,y indicate mounting holes 1-800-RLIN (733-5464) US or 518-797-3259 (International) www.hannay.com reels@hannay.com 7
S R I S OR OR TM RSU TOOLS To handle hydraulic olmatro OR Technology TM coaxial twin hose. Lighter weight hose and single fitting connection when compared with traditional rescue tool hose. hain and sprocket drive powered by an electric motor. djustable spring drag brake standard on all models. OR Technology TM swivel joint inlet and fluid path. Optional factory-installed 4-way roller guide available. Pressures to 10,500 psi (724 bar). Temperatures from -30 to +225 (-34 to +107 ). ivider disc separates hose from adapter block outlet. Standard finish is oven-cured enamel. Polished stainless steel discs & sprocket with chrome frame available. Left Top Shown Lead-in ose is Optional Parts rawing ISO 217 Model ose apacity of Reel pprox. Weight Reel imensions*** Number feet lb. inches m. kg. mm. NOT 1 inch = 25.4 mm ore Technology oaxial ose Optional Roller ssembly 2 Shown O.. (in) 7/8" NT SIP 1 O.. (mm) 22 POWR POWR 2216-17-18 1/60 87 122 13 8 5 19 17.62 11.5 1/18 39 55 330 203 127 483 448 292 2220-17-18 1/100 89 124 17 12 9 19 20.87 15.5 1/31 40 56 432 305 229 483 530 394 1. lectric rewind models available in either 12V or 24V. Reels supplied with switch and solenoid. 2. dd 2-1/2" to dimension and 1/2" to dimension with ssembly 2 Roller installed in top wind position. 3. e sure to check all dimensions and weights prior to ordering. Must specify right or left-hand configurations. 4. bove reels cannot be shipped via UPS or edx round. 5. Some roller options may prohibit the use of our molded chain guard. ***x,y indicate mounting holes Optional xternal Mounting rackets part no. 9906.0025 dd 2-1/2" to the dimension shown in the chart. 1 6 152 18.12 460 9.88 251 Right Top onfiguration Shown 10 254 14.5 368 8 1-800-RLIN (733-5464) US or 518-797-3259 (International) www.hannay.com reels@hannay.com
S R I S ront View OR POWR RSU TOOLS To handle dual hydraulic 1/4" I.. hose. hain and sprocket drive powered by an electric motor. 90 swivel joints with 1/4" female NPT threads. Rescue tool manufacturer must be specified to determine threads required and to determine packing material required. Pressures to 10,500 psi (724 bar). Temperatures from -20 to +225 (-29 to + 107 ). Standard finish is oven-cured enamel. Rear View Parts rawing ISO 225 Model ose apacity of Reel pprox. Weight Reel imensions*** Number feet lb. inches m. kg. mm. I.. (in) 1/4" I.. (mm) 6 O.. (in) 17/32" NT SIP O.. (mm) 13.5 2514-17-18 2/100** 57 73 9.5 6 10 4 2/31 26 33 241 152 254 102 2516-17-18 2/100 59 73 11.5 8 12 6 2/31 27 33 292 203 305 152 1. 2. lectric rewind models available in either 12V or 24V. 3. Reels supplied with switch and solenoid. 4. e sure to check dimensions and weights prior to ordering. 5. Model 2516-17-18 is the preferred model for all 100 ft. hose assemblies. The narrower model 2514-17-18 will only hold 100 ft. of urst (5,000 psi) twin hose and only when perfectly wrapped. NOTI: lexible onnector must be used between the inlet pipe and the inlet swivel joint. * imensional weight may apply when shipped as a parcel package (via edx or UPS round). ** ose capacity is a tight fit and only valid for urst hose. *** x,y indicate mounting holes. 6 152 18.12 460 9.88 251 22.25 565 10 254 14.5 368 1-800-RLIN (733-5464) US or 518-797-3259 (International) www.hannay.com reels@hannay.com 9
S R I S SPRIN RWIN RLS OR UTILIT OR RTIN IR OS To handle 3/16" through 1/2" I.. hose. eavy-duty spring motor. Non sparking ratchet assembly. eclutching arbor. 90 full flow swivel joint with 1/2" female NPT threads. Outlet is 1/2" female NPT threads. onsult factory for other sizes and/or threads. N and LN700 reels pressures to 3000 psi (207 bar). N700 reels pressures up to 6000 psi (414 bar). Temperatures from +20 to +400 (-7 to +204 ). onsult factory for other pressures and temperatures. Supplied with a 4-way roller assembly. Roller position must be specified. ose stop required, order p/n 9922.0200 (must specify hose o.d.). Parts rawing ISO 79 Roller Positions vailable Standard onfiguration Shown Optional ose Package SR (ST) VR (OPT) TR (OPT) Model ose apacity of Reel pprox. Weight Roller Reel imensions Number feet lb. ssy. inches m. kg. Supplied on mm. Std. Models N/N indicate mounting holes I.. (in) 3/16" 1/4" 3/8" 1/2" I.. (mm) 5 6 10 13 O.. (in) 0.42 0.5 0.64 0.88 NT SIP N/ N/ N/ N/ N/ N/ O.. (mm) 11 13 16 22 N716-14-16 25 25 30 25 52 87* N204 10 4 8 17.62 13 16.25 9.12 8 8 8 9 8 24 39 254 102 203 448 330 413 232 203 N716-16-17 30 35 35 30 55 90* N204 10 4 10.5 18.5 13 17 9.12 8 9 11 11 9 25 41 254 102 267 470 330 432 232 203 N716-19-20J 35 50 50 50 64 99* N204 10 4 10.5 20.75 13 20 10.62 8 11 15 15 15 29 45 254 102 267 527 330 508 270 203 N715-23-24J 75 75 75 50 79 89* N203 9 3 15.5 23.75 12 24 12.62 7 23 23 23 15 36 40 229 76 394 603 305 610 321 178 N716-23-24 100 100 100 65 94 109* N204 10 4 15.5 23.75 13 24 12.62 8 30 30 30 20 43 49 254 102 394 603 330 610 321 203 N718-25-26 100 98 133 N206 12 6 15.5 25.25 15 26 13.62 10 30 44 60 305 152 394 641 381 660 354 254 1. Reel models and capacities shown are for standard drag applications; for vertical lift or constant tension applications consult factory. 2. Other sizes, from standard components, available on request. 3. Model esignations N = Utility ir pplications. LN = Low Pressure reathing ir applications. N = igh Pressure reathing ir Systems (6000 psi). or example: N 716-14-16 - is a high pressure breathing air reel. 4. e sure to check dimensions and weights prior to ordering. NOTI: lexible onnector must be used between the inlet pipe and the inlet swivel joint. *imensional weight applies when shipped as a parcel package (via edx or UPS round) N/ N/ N/ N/ N/ N/ N/ 10 254 N/ 12 305 10 1-800-RLIN (733-5464) US or 518-797-3259 (International) www.hannay.com reels@hannay.com
S R I S PORTL LTRI L RLS ompact, lightweight. Rugged construction. Large capacity. 3-conductor collector ring assembly. 6-foot power source lead of 12/3 cable. 15 amp straight blade plug (15-amp or 20-amp twist lock optional). djustable friction brake. Permanent crank rewind handle. Optional 15-amp 3-prong straight blade receptacle recessed in drum. Part No. 9955.0090 Parts rawing ISO 156 Model able apacity of Reel pprox. Weight Reel imensions Number feet lb. inches m. kg. mm../no. O ONUTORS 16/3 14/3 12/3 O.. (in).39.53.60 NT SIP O.. (mm) 10 13 15 R16-14-16 400 200 150 24 32* 9.25 7.5 6 15.5 14 14.5 18.5 8.88 122 61 46 11 15 235 190 152 394 356 368 470 226 1. e sure to check dimensions and weights prior to ordering. *imensional weight applies when shipped as a parcel package (via edx or UPS round) 1-800-RLIN (733-5464) US or 518-797-3259 (International) www.hannay.com reels@hannay.com 11
O P T I O N S UTILIT OS ROLLRS Stainless steel rollers and cast alloy mounting blocks for use on the reel, on cabinet door openings, truck platforms and similar locations where sharp edges may cut or damage hose or cable. R L Specifications: 1-1/2 diameter SST rollers, SST rod, elrin bearings, plated mounting blocks and fasteners. To Order: If the rollers are to be mounted on a annay reel, just give the model number of the reel. If the rollers are to be mounted separately from the reel, give the horizontal and vertical roller lengths desired (dimensions Z and W), or the horizontal and vertical distances desired between mounting holes (dimensions and ). lso available factory-installed on the reel. See annay parts list ISO-115 for further information. L ssembly 2 Z W R R KITS (RL-MOUNT RL/IRUIT RKR MOULS) R kits are compact, weather-resistant kits that consist of a manual reset circuit breaker and a solid state relay (which replaces the solenoid). These kits can be factory-installed when ordering reels, leading to significant labor savings and eliminating the need to fabricate and mount a bracket. R kits are designed to work with all rescue reel models (series 1500, 1600, and 2000). If you already have a reel and would like to install an R kit yourself, call annay Reels or your local dealer for standalone pricing and part numbers. SP ONTROL SSORIS Model SR-50 This is an economical fixed speed control, offering a 50% reduction in motor rewind speed. Works on both 12V and 24V motors. Order using annay part number 9917.0082. Model M-70 This is a variable speed control, allowing the user full control over the motor speed. Works on both 12V and 24V motors. Order using annay part number 9917.0080. Model M-1225S This is variable speed control for 12V motors that also includes a pushbutton switch, manual reset 25 amp circuit breaker, and relay. Order using annay part number 9917.0082. Model SR-50 Model M-70 Model M-1225S NOT: Several other speed controls, switches, and reversing switches are available (for 12V, 24V, and 115V). onsult factory for assistance. 12 1-800-RLIN (733-5464) US or 518-797-3259 (International) www.hannay.com reels@hannay.com
omestic Inside Sales epartment arren assler Lance oehlke eorge ignor Tim ealey Keith vizdak xt. #207 xt. #208 xt. #240 xt. #210 xt. #262 Rob Motschmann Tim Preston Kim Winnie Noel Withjack xt. #230 xt. #211 xt. #230 xt. #295 International Sales epartment Sales Manager Manufacturing/ Production Scott annay arol larke enis leile Mike erguson xt. #249 xt. #241 xt. #244 xt. #234 1-800-RLIN (733-5464) US or 518-797-3259 (International) www.hannay.com reels@hannay.com
annay Reels ut Response Time, Increase Safety In rescue operations, response speed can save lives because a few seconds lost can make all the difference. mergency responders cannot waste any time fighting with hose or power cables. Rescue reels are vital for azmat situations, vehicular extrications, at-the-scene emergencies, and breathing and utility air applications. In fact, over the last five to six years, rescue reel production has increased significantly as municipalities have demanded that more fire departments have rescue, first aid, and ambulance capabilities. annay engineers have designed the Rescue Series to help rescue squads respond to emergencies quickly, safely, and efficiently. The series features the 1500, ideal for utility air or breathing air; the R1600, which handles live electric cable and is invaluable when a continuous source of power is needed; and the 2000 dual-hose reel, unsurpassed in rescue situations that require hydraulic hose for power tools. or years, rescue squads have come to depend on annay reels for their reliability, ease of use, and long life. irefighting Reels catalog also available. amily owned and operated since 1933, annay Reels is the world leader in both OM and aftermarket applications. annay offers thousands of standard hose reel and cable reel models, as well as unmatched custom capabilities. We can easily and affordably customize a reel to meet your exact specifications built to last, delivered fast. dditional catalogs are available through your local annay Reels dealer or online at www.hannay.com. 553 State Route 143 Westerlo, New ork 12193-0159 Toll ree Phone: 1-877-O-RLS Toll ree ax: 1-800-RLIN -mail: reels@hannay.com Intl. Phone: 1-518-797-3791 Intl. ax: 1-518-797-3259 www.hannay.com ll annay reels are constructed of quality eavy auge Steel (optional luminum or Stainless Steel also available on most models.) M IN U.S.. WSP 3M 12-09 orm -0503-R Rev 3