MHL D MATERIAL HANDLER Specifications Standard Machine Weight Engine Output Reach, lbs 9 t hp kw Up to ft. m Features Fuel efficient and powerful, the hp kw turbo diesel engine enables movement of loads with speed and precision Separate large-surface oil cooler helps to keep operating temperature in an acceptable range even with high utilization Standard air conditioning and special features such as optional reversible fans and an optional pressurized cabin system for a variety of operating conditions Operator s cabin designed for excellent visibility it can be elevated to a maximum eye-level of ft. m and is fitted with large surrounding windows
SPECIFICATIONS ENGINE Manufacturer, Model Design Engine Control Type Engine Output Nominal Speed Deutz TCD L V -cylinder inline EMR III -stroke diesel, direct common rail fuel injection, turbocharged with charge air cooling hp kw rpm Displacement 6. in cm Cooling System Emission Standards Air Filter Design Fuel Tank Capacity ELECTRICAL SYSTEM Operating Voltage Batteries Lighting Set Generator TRAVEL DRIVE Liquid intercooling with temperature-controlled fan speed EPA Tier III and COM III Two-stage filter 9 gal L V x V / Ah / A (in accordance with EN) x H floodlight on upper carriage, x H floodlight on cab floor, turn signal and rear sidemarker lamps kw generator with control, driven by V-belt direct from diesel engine Hydrostatic drive through infinitely variable axial piston motor and directly mounted travel brake valves, two-speed shift gear, all-wheel drive Travel Speed st gear nd gear Maximum. mph km/h Maximum. mph km/h Gradeability Maximum % Turning Radius ft m SWING SYSTEM Ring Gear Drive Upper Carriage Swing Speed Pivot Brake UNDERCARRIAGE Internally toothed ball ring gear (double row) Two-stage planetary gear with integrated multi-disc brake - rpm Electrically operated Front Axle Planetary drive axle with integrated drum brake, rigidly mounted, maximum steering angle Rear Axle Oscillating planetary drive rear axle with integrated drum brake and selectable oscillating axle lock Stabilizers -point stabilizers, -point stabilizers with stabilizing blade (optional) Tires Solid rubber, elastic tires -fold.- ELECTRIC DRIVE Electric drive machine options are available in a variety of stationary or mobile configurations tailored according to customer requirements BRAKE SYSTEM Service Brake Parking Brake HYDRAULIC SYSTEM Hydraulic single-circuit braking system acting on all four wheel pairs (drum brakes) Electrically operated spring-loaded disc brake at transmission, acting on both front and rear axle REXROTH mobile hydraulic system with flow-on-demand control. Separate oil cooler, temperaturecontrolled fan speed. Hydraulic oil filter: Filter elements integrated in the oil tank; maintenance interval up to operating hours. Central lubrication system. Maximum Pump Capacity gal/min 9 L/min Maximum Operating Pressure 6/ psi /6 bar Hydraulic Oil Tank 9 gal L OPERATOR S CAB Cab: elastically supported, infinitely variable hydraulically height-adjustable with maximum eye-level of ft. m. Large windows for optimum all-around view, windshield with pull-down sun-blind that slides under cab roof, visibility panel in cab roof, sliding window in cab door, steering column height and tilt adjustable. Heating Infinitely variable hot water heating with -speed fan, adjustable defroster nozzles Operator s Seat: Mechanically cushioned comfort-seat with integrated headrest, safety belt and lumbar support, seat heating with integrated a/c function optional. Seat position, seat inclination and seat cushion multi-adjustable in relation to position of armrests and pilot control units, allowing low fatigue operation. Monitoring: Ergonomic instrument layout, glare resistant. Function monitoring; automatic warning and storage of deviating operating conditions, e.g. filter pressure with warning indicator and shutdown of pilot controls, warning indicator or shutdown of pilot controls if hydraulic oil temperature limits are exceeded. Air Conditioning Automatic SAFETY INSTALLATIONS For crane operations in accordance with EN -. Cab protection by close proximity range limiter.
EQUIPMENT MHL D ENGINE Exhaust gas turbocharger Intercooling Direct electronic fuel injection/ Common Rail Automatic idle Interface for engine diagnosis Temperature-controlled fan drive UNDERCARRIAGE -speed power-shift transmission -point stabilizers -point stabilizers and stabilizer blade -point stabilizers, individually controllable Stabilizer cylinders with integrated two-way check valves All-wheel drive UPPERCARRIAGE Electric refuelling pump Lighting protection Maintenance hood, actuated by gas strut, with mechanical locking device Lockable cleaning access openings on radiator Piston rod protection on stabilizer cylinders Rear axle oscillating lock Blade in addition to -point stabilizers Special paint Drum brakes Tool box on undercarriage Separate radiator system for ambient temperatures up to F ( C) Separate oil cooler with temperature controlled fan drive Automatic central lubrication system Special paint Quick-drain valve for fuel tank (supplied in tool box) Quick-drain valve on hydraulic oil tank Quick-drain valve on radiator Quick-drain valve on engine oil-pan Reversible fan for radiator and hydraulic oil cooler Tool box (small) in upper carriage CAB EQUIPMENT Floodlight attached to cab floor Floodlight, mounted to upper carriage Floodlight, stick mounted, left Close proximity range limiter for stick Coolant and hydraulic oil level monitoring system Hose rupture protection for lift cylinder Hose rupture protection for stick cylinder Stick shock protection Lubrication of the grab suspension by central lubrication system Overload warning / shutdown Lift-up skylight in cab roof XENON floodlight on stick Operator s seat mechanically cushioned XENON floodlight on superstructure Air cushioned operator s seat with headrest, safety belt and lumbar support FOPS protective grating (roof) Front/roof protective grating XENON floodlight on cab roof Ball-valve coupling Filter system for attachments Hinged front windshield LEXAN front window glass High strength glass, front and top Cab elevation system Air conditioning Steering column, height and tilt adjustable Multi-function color display Fire extinguisher, dry powder Radio / CD player Rotating beacon ATTACHMENTS Open-tine grapple Half-closed grapple Mag grapple combination Magnet plate Clamshell bucket Log grapple Pipe handler Load hook Sliding window in cab door Safety glass Seat heating with integrated A/C function Windscreen washer system Dust protection system Pressurized cabin system
GENERAL DIMENSIONS -POINT STABILIZERS WITH SUPPORT BLADE. ft mm. ft 6 mm. ft 96 mm. ft 99 mm 6. ft 9 mm 6. ft 9 mm. ft 9 mm.9 ft mm. ft 9 mm. ft mm. ft 99 mm. ft 6 mm.9 ft 9 mm. ft mm. ft mm with protective grating for cab roof -POINT STABILIZERS. ft mm. ft 6 mm. ft 96 mm. ft 99 mm. ft mm TRANSPORT DIMENSIONS DIMENSIONS WITH STICK. ft 9 mm.9 ft mm. ft 9 mm.9 ft mm. ft mm. ft 99 mm. ft 6 mm.9 ft. ft mm. ft mm with protective grating for cab roof DIMENSIONS WITH UNIVERSAL STICK E D E D A B C A B C Reach.9 ft mm Reach. ft 99 mm Reach. ft 9 mm Reach 6.9 ft 99 mm (Universal stick) Reach. ft 9 mm (Universal stick) A.6 ft 9 mm. ft mm 6. ft 6 mm. ft mm.6 ft mm B. ft 6 mm. ft 69 mm. ft 96 mm.6 ft mm. ft mm C. ft mm. ft mm. ft mm. ft mm. ft mm D. ft / *. ft mm / mm. ft / *. ft mm / mm. ft / *. ft mm / mm. ft / *. ft mm / mm. ft / *. ft mm / mm E. ft mm.6 ft mm.9 ft 6 mm. ft mm. ft 6 mm * with protective grating for cab roof
WORKING RANGES AND LIFTING CAPACITIES MHL D 9 Reach. ft 9. m Box-type boom. ft. m Dipperstick. ft. m Attachment options: 6 Open-tine grapple Half-closed grapple Magnet plate Clamshell bucket - Log grapple - - - 9 6 Load hook HEIGHT ft HEIGHT m.. 9. 9,* l 6.*.6.,6* l.* 9..6 9. 6. 9 9. 6,6* l.* 9,9* l.*..,99* l 6.*,* l.*,* l.6*,6 l. 9. 6,96* l.*,* l.*,* l.6*,6 l..9.,9* l.*,* l 6.* 9,9 l.,96 l.,* l.*,* l.* 9,* l.* 6,6* l.* -.9.,* l 6.*,* l.9*,9* l.6* Capacity values are stated in pounds metric tons. The pump pressure is psi 6 bar. The values, in accordance with ISO 6, amount to % of the static tipping load or % of the hydraulic lifting force (marked*). They apply to slewing operations through 6 on a firm and level surface. The weight of the attached hoisting equipment (coupler, grapple, magnet, clamshell, load hook, etc) must be deducted from the capacity values. In accordance with CE guidelines, hose-rupture protection valves on the lift cylinders and an overload warning device are required for crane operations.
WORKING RANGES AND LIFTING CAPACITIES Reach. ft 9. m Box-type boom. ft. m Universal stick. ft. m Reach 6.9 ft. m Box-type boom. ft. m Universal stick. ft. m 9 9 6 6 - - - - - 9 6 of rotation - - - 9 6 HEIGHT ft HEIGHT m.. 9. 9,669* l 6.*.6.,* l.9*,* l.* 9..6 9. 6. 9 9. 6,* l 6.*,* l.* 9,9 l...,* l 6.6*,6* l.* 9,9 l. 9. 6,* l.6*,* l.*, l. 6,9 l.9.9.,* l.*,* l.*,9 l.6 6,9 l.9 6,* l.6*,9* l.*, l. -.9.,* l 6.* 9,* l.* 6,6* l.* HEIGHT ft HEIGHT m 9. 9. 9,* l 6.9*.6.,9* l 6.*. 9..6. 6. 9. 6,* l.9*,6* l.*..,9* l 6.*,9* l.* 9,9 l. 9. 9,6* l.9* 6,9* l.*,66* l.* 9,9 l..9.,* l.*,9* l.*, l., l. 6,* l.*,9* l.*,66 l.,* l.* -.9.,96* l.*,* l 6.9*,* l.6* Attachment options: Sorting Grapple Demo Mag Open -tine Grapple Half-closed grapple Magnet plate Log Grapple Capacity values are stated in pounds metric tons. The pump pressure is psi 6 bar. The values, in accordance with ISO 6, amount to % of the static tipping load or % of the hydraulic lifting force (marked*). They apply to slewing operations through 6 on a firm and level surface. The weight of the attached hoisting equipment (coupler, grapple, magnet, clamshell, load hook, etc) must be deducted from the capacity values. In accordance with CE guidelines, hose-rupture protection valves on the lift cylinders and an overload warning device are required for crane operations.
MHL D Reach. ft. m Box-type boom. ft. m Dipperstick 6. ft m Reach.9 ft. m Box-type boom. ft. m Dipperstick. ft. m 9 6 9 6 - - - - - 9 6 - - - 9 6 HEIGHT ft HEIGHT m. 9..6 9.. 6. 9 9. 9,6* l.*.6. 9,9* l.* 9,9* l.* 9. 6 9,9* l.* 9,9* l.*,96 l...,* l.* 9,9* l.*, l. 9.,* l 6.*,6* l.* 9,* l.*, l..9.,6* l.*,* l.* 9, l., l.,9* l.*, l. 9,9 l., l. -.9.,96* l.*,6* l.6* 9,9* l.* 6,6* l.* -9. -,669* l 6.* 9,9* l.*,* l.*. 9..6 9. HEIGHT ft HEIGHT m. 6..6.,669* l 6.* 9,9* l.* 9. 6,9* l.*..,669* l 6.*,* l.*, l.6 9.,* l.*,* l.* 9,9 l..9. 9,6* l.*,9* l.*,669* l 6.* 9,9 l.,9* l.* 9,* l.*,* l 6.* 9,* l.* -.9.,6* l.* 6,* l.6*,6* l.*,* l.* Attachment options: Open-tine grapple Half-closed grapple Magnet plate Clamshell bucket Log grapple Load hook Capacity values are stated in pounds metric tons. The pump pressure is psi 6 bar. The values, in accordance with ISO 6, amount to % of the static tipping load or % of the hydraulic lifting force (marked*). They apply to slewing operations through 6 on a firm and level surface. The weight of the attached hoisting equipment (coupler, grapple, magnet, clamshell, load hook, etc) must be deducted from the capacity values. In accordance with CE guidelines, hose-rupture protection valves on the lift cylinders and an overload warning device are required for crane operations.
Mobile MHL MHL MHL MHL MHL MHL MHL MHL6 MHL6 MHL MHL TIER TIER i [kw] / / / /9 /9 /6 /6 6/9 6/9 / / [hp] / / / / / 99/ 99/6 9/ 9/ 66/ 66/ Electric Drive [kw] 9 9 [hp] 6 6 [m]........... 6... 6.. 6. 9..... [ft] 6.9. 6.9.. 9......9..9.. 9.. 6. 6.. 6.6. up to [t] 9... 9.... 6.. 6.. up to [lbs],,9,6 6,9 66,9,6,6,,,9 6,9 Crawler RHL RHL RHL RHL RHL RHL RHL RHL6 RHL6 RHL RHL up to [t]... 6. 6. 6. up to [lbs],9 6, 6,,6, 9.9, 9,9, 6, www.terex.com/construction Effective Date: August. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks, or trade names of Terex Corporation and/or its subsidiaries in the USA and other countries. All rights are reserved. Terex Construction. Terex, Terex Fuchs and Works For You trademarks owned or licensed by Terex Corporation or its subsidiaries. Terex Construction Rostin Road, Southaven, MS 6 USA Tel + () 9-TEREX www.terex.com /construction *Effective production date June