PRELIMINARY NEW! 1 kw 0 t Heavy Duty Cycle Crawler / Crane 1.1 m TIER IV
Further developed. The E-Series. The characteristics of the E-Series 0 years of experience in the design and construction of duty cycle crawler cranes Uncompromising high-performance in all areas Technology that can be mastered: High-quality components and avoidance of over-engineering Long product service life and high value retention 19: Rope-driven S33 with elevated operator cab Your most important advantages: Green Efficiency Save fuel lower operating costs Quiet work easy on the operator and on the environment Performance at the highest level Robust mechanical engineering parts subject to load are optimized High speeds high safe working loads Maximum operating comfort Maxcab comfort cab relaxed work SENCON SENNEBOGEN Control System Maximum safety Safe entry and exit non-slip step surfaces Modern cameras the entire work area is in view Maintenance and service made easy Easy fault diagnosis central measuring points Easy maintenance clear labelling Consultation and support 3 production locations subsidiaries 0 Sales Partners more than 300 service support points Dragline bucket equipment
Leader Casing oscillator Grapple equipment Crane equipment Crane equipment with fixed fly Marine equipment 3
Technical data equipment MACHINE TYPE Model (type) 0 Power Model Cooling Air filter Design ENGINE Fuel tank Electr. system Batteries 1 kw / 53 HP at 150 rpm CAT C7.1 Level IIIa or IV Direct injection, turbo-charged, charge air cooler, reduced emissions Water-cooled Dry filter with pre-separator, automatic dust discharge, main element and safety element, contamination indicator 50 l V x 150 Ah, main switch UPPERCARRIAGE Torsion-resistant box design, precision crafted, bronze bushings for boom bearing arrangement Hydraulic tank Control system Options Gearbox SLEWING DRIVE Parking brake Slewing ring Slewing speed 550 l (50 l to the middle of the sight glass) Proportional, precision hydraulic servo controllers of work movements, hydraulic servo joysticks for work functions, supplemental functions via switches and foot pedals arranged clearly and ergonomically Bio-oil filling ecologically worthwhile SENNEBOGEN HydroClean micro-filter system with water separator Potentiometer for casing machine and other attachments Grapple fill automation Supplemental hydraulic system with 1 x 0 l/min Compact planetary gear with slant axis hydraulic motor, integrated brake valves positioner slewing gear brake Spring-loaded disk brake Ball bearing rotary connection with exterior gearing 0-, rpm, 3 adjustable slewing speeds Lighting Safety Options Clear, service-friendly concept, engine installed in the longitudinal direction LED spotlights for optimal illumination of the work area Camera monitoring of the rear area and right side Maritime climate paint finish as corrosion protection Low-temperature package for work deployments at temperatures under -0 C Ballast support fixture Pinion tooth lubrication for slewing ring, outer Automatic central lubrication system for equipment and slewing ring, inner Walkways left and right on the uppercarriage HYDRAULIC SYSTEM Multi-circuit hydraulic system for optimal function and capacity, running all movements simultaneously is possible. The hydraulic pumps are variable displacement piston pumps with individual control and energy-saving flow-on-demand control. The pumps only request as much oil as is actually consumed. Pressure cut-off, load limit sensing control Delivery rate maximum 3 x 0 l/min Operating to 330 bar pressure Filtration High-performance filtration with long-term change interval, contamination level indicator Options CAB Cab type Cab equipment Options nd slewing gear for increased slewing moment Maxcab rigid Sliding door, excellent ergonomics, climate automation, seat heater, air-suspension comfort seat, fresh air filter / circulating air filter, joystick steering, V / V connections, SENCON, roof window Hydraulically elevating cab type E70 (can be elevated 70 cm) Cab can be tilted 15 Auxiliary heating system with timer Cab active-charcoal filter inside air/ outside air Sliding window in the operator door Armored glass windshield, additional safety Armored glass roof window, additional safety Safety side window and rear window Sunblind for windshield Protective roof grating FOPS protective roof grating Front protective grating Radio with speakers Subject to change.
Technical data equipment Design ATTACHMENTS Boom adjustment winch Safety brake Boom Options Decades of experience and the latest computer simulations guarantee the greatest degree of stability and longest service life. Drive via slant axis hydraulic motor with compact planetary gear, pulling force 5 kn, rope diameter mm, adjustment speed 30 to 0 in approx. 0 seconds. Spring-loaded disk brake Boom length 1.1 m Auxiliary jib, for safe working loads to t Fixed fly to 1 m Steel rope sheaves Jib sheaves for grapple implementation sheaves for working with optimal rope guide Boom damping, hydraulic Load moment limitation for hoisting implementation: Latest generation of load moment monitoring, Display shows all important data, lifting limit switch, pressure relief valves, rope run-out safeguard WINCH The winches are driven via high-pressure regulated adjustable hydraulic motors, thus there is always optimal pulling force speed control. Hydraulic lowering brake valves for sensitive, wear-free braking. Strong oil bath, planetary gear, lowmaintenance. Crane brake and free-fall brake are spring-loaded, maintenance-free, low-wear disc brakes running in the oil bath, oil-cooled. The individual, variably adjustable free-fall brake actively support the operator, prevents slack cable and protects the machine Series production Option Winches t 1 t Rope winch (rated load) 1st layer 0 kn 10 kn Rope diameter mm mm Rope speed 0-5 m/min 0-0 m/min Options Mass Grapple steadying winch 9 kn Grapple steadying winch 1 kn Grapple steadying winch 30 kn rope tensioning pulley OPERATING WEIGHT approximately 0,000 kg Design Drive UNDERCARRIAGE Parking brake Traveling gear Speed Options Extremely strong crawler undercarriage, type T1/30 with hydraulically extensible track width. Stable welded construction. Strong travel drive with axial piston hydraulic motor and directly attached automatically functioning brake valve and compact planetary gear per each running gear side; protected drive transmission Spring-loaded disk brake Maintenance-free tractor running gear B0 with hydraulic chain tension, 700 mm 3-grouser base plates, 0.0 km/h 700 mm flat base plates (transport width 3000 mm) 00 mm flat base plates (transport width 300 mm) 00 mm 3-grouser base plates (transport width 300 mm) Tractor running gear B with increased traction force Note 0 with x t freefall winches, basic boom.3 m, counterweight. t, 0 t bottom hook block, 700 mm 3-grouser base plates, 5 m hoisting rope The operating weight varies depending on version and equipment. Subject to change. 5
50 Main boom 0 70 0 3 0 3 3 0 3 3 30 30 0 1 1 15 1,1m 3,3m 9,9m 7,1 m 1,7m 15,9m 13,1m 0 0 3 3 3 3 30 0 1 1 0 Boom configuration Boom length.3 13.1 15.9 1.7 1.5.3 7.1 9.9 3.7 35.5 3.3 1.1 Lower boom section, type 1370. m 1 1 1 1 1 1 1 1 1 1 1 1 Intermediate boom section, type 1370 (DL) *. m 0 0 (1) 0 (1) 0 (1) 0 (1) 0 (1) 0 0 0 0 0 0 Intermediate boom section, type 1370. m 0 1 (0) (1) 1 (0) (1) 1 (0) 1 1 1 Intermediate boom section, type 1370 5. m 0 0 0 1 1 1 1 1 Intermediate boom section, type 1370 11. m 0 0 0 0 0 0 0 1 1 1 1 Boom headpiece, type 1370 5.9 m 1 1 1 1 1 1 1 1 1 1 1 1 Auxiliary jib S.5, type 1370 (option).0 t x x x x x x x x x x x x Technical data and dimension information subject to change. * The. m boom section, type 1370 (DL) is only required for dragline bucket implementation, values in ( ) apply for dragline bucket operation
Safe working loads SH Main boom. t Boom length [m] Working radius [m].3 13.1 15.9 1.7 1.5.3 7.1 9.9 3.7 35.5 3.3 1.1. 0.0 3.0 0.0 0.0 39./3.3 3./3..0 35. 33. 31.1 9.1 7. 3.9/.3 0./.7 5.0 5.. 3.5. 1. 0. 19.3 1.5 1.3/5../5.7.0 19. 19.1 1.9 1.0 17. 1.5 15. 15...0 13.5./. 7.0 15. 15.1 15.0 15.0. 13.9 13..9..0 11.5 11.1.0.5..3.3. 11.9 11.5 11.1.7.3.0 9. 9.0..5..3...0 9.7 9. 9.1.7.5.0 9. 9.1.9.9.....3.0 7.7 7.5 11.0./.9 7.9 7. 7. 7. 7. 7.5 7.5 7. 7..9.7.0 7.1.9.9.7.7...5...0 13.0.3..1.0.0 5.9 5. 5.7 5. 5.5 5..0.0/13. 5. 5.5 5. 5. 5. 5. 5.1 5.0.9. 15.0 5.1 5.0.9..7.7..5..3 1.0.....3..1.0 3.9 3. 17.0.5/1.3..0.0 3.9 3. 3.7 3. 3.5 3.5 1.0 3.9 3.7 3.7 3.5 3.5 3. 3.3 3. 3.1 19.0 3. 3. 3. 3. 3. 3.1 3.0.9. 0.0 3. 3.1 3.0.9..7..5.0./1.7.7.5.5..3.1.1.0.3..1.0 1.9 1. 1.7.0./. 1.9 1. 1.7 1. 1.5 1..0 1.7/7.1 1. 1. 1.3 1. 1.1 30.0 1./9. 1. 1.1 1.0 0.9 3.0 1.1 0.9 0. 0.7 3.0 1.0/3.5 0. 0.7 0. 3.0 0.7/35. 0.5 0. 3.0 TABLE no. 0R-0/195/./0. SH 0. 0.3 Strand Ø mm 3 3 number Ø mm 5 5 5 3 3 3 Comments: 1. The specified safe working load values apply for level and stable stance of the machine.. The safe working load values are specified in tons (t) and apply for 30 degrees. 3. The safe working loads take the standards ISO 305 Tab. 1+, and the tilt angle method (tilt angle ) into account. Deduct the weight of the load handling devices (hook, suspension gear) from the safe working loads. 5. The safe working loads apply for the maximum undercarriage track width of 300 mm.. The safe working load values must be limited or reduced in order to take unfavorable conditions into account, such as soft or uneven ground, inclined slopes, wind, lateral forces, swinging loads, jerking or sudden stopping of the load, inexperience of the personnel or driving with a load. 7. Permissible rope winch per strand in crane operation for rope diameter at mm,000 kg at rope diameter mm 500 kg. Safe working loads apply for the SH boom (boom assembly in accordance with the operating manual) 9. Safe working loads apply for optimum boom assembly and a pulley head with plastic pulleys.. The specified safe working load values are only for orientation. See the operating manual for the respectively valid safe working loads. Auxiliary jib S.5 maximum hoisting capacity.0 t (rope diameter mm) or maximum hoisting capacity.5 t (rope diameter mm) ca. 1 3 Technical data and dimension information subject to change. 7
Fixed fly boom 5 5 50 50 0 70 0 3 0 0 3 3 3 3 30 30 15m 3,7m 15m 3,7m 0 3,7m 9m 3,7m m 3,7m 3,7m 1 1 3,7m 9,9m 7,1 m,3m 1,5m 1,7m 0 0 3 3 3 3 30 0 1 1 Technical data and dimension information subject to change.
Safe working loads SHFS Fixed fly boom. t Main boom length [m] 5 1.7 1.5.3 7.1 9.9 3.7 Working radius [m] 5.0 Fly boom length [m].0 9.0.0 15.0 1.0.0 9.0.0 15.0 1.0.0 9.0.0 15.0 1.0.0 9.0.0 15.0 1.0.0 9.0.0 15.0 1.0.0 9.0.0 15.0.0/ 5..0.0 11./. 7.0.0 11.../ 7..0/ 5.5.0/ 5.9./.9.0 11.5/.5.0 11./.9 5.3/ 7.7.0 11..5/ 7.3.0.0 11.1.5. 5. 11. 11.1.. 5. 11. 11.0..3/.1.0/..5/ 7..0 11..3/ 7..0.9/ 7..0./ 7. 11..1/ 7.9 5.1/....1.1/.5.0/. 5.0/.7.5.3 7./.3 11./.9 5.9/..1.0 7./. 9.0...3. 5...0..3 5.1 9. 9.7.0. 5.0 9.5 9. 7.9.0 5.0 9. 9.1 7.7 5.9.9.9. 7.5 5.7/ 9.1.0.9 9.0.1. 5.1..9.1. 5.0.7. 7..1 5.0..3 7. 5.9.9.1.1 7. 5.9. 7.9 7. 7. 5. 11.0 7. 7.9 7..1 5.0 7.7 7. 7..1.9 7. 7.7 7.5.0.9 7.5 7. 7.3 5.9. 7.3 7. 7.1 5..7 7.0 7.0.9 5..0.9 7.0 7.0 5.9.9..9.9 5.9..7.. 5.9...7. 5..7.5.5. 5.7.7.3.3. 5.5 13.0.1..3 5...0.1. 5.. 5.9.0.1 5..7 5. 5.9.0 5.7.7 5. 5.9 5. 5.. 5.7 5.7 5. 5..0 5.5 5. 5. 5..7 5. 5.5 5.5 5.5.7 5.3 5. 5. 5.5. 5. 5.3 5. 5.. 5.1 5. 5.3 5..5 5.0 5. 5.1 5.0 15.0 5.0 5.0 5.1 5.1..9.9 5.0 5.0...9.9.9..7....5..7...5.5..7. 1.0.5....5..5.5.5.5.3...5...3.3..3...3.3.3.1... 17.0.1.....0.1.1.1.1 3.9.0.0.1.0 3. 3.9 3.9.0 3.9 3. 3. 3.9 3.9 3.9 3.7 3.7 3. 3. 1.0 3. 3. 3.9 3.9 3.9 3.7 3.7 3. 3. 3. 3. 3.7 3.7 3.7 3.7 3.5 3.5 3. 3. 3. 3. 3.5 3.5 3.5 3.5 3.3 3. 3. 3.5 19.0 3.5 3.5 3. 3. 3. 3. 3. 3.5 3.5 3.5 3.3 3.3 3. 3. 3. 3. 3. 3.3 3.3 3.3 3.1 3. 3. 3. 3. 3.0 3.1 3.1 3.1 0.0 3. 3.3 3.3 3.3 3.3 3.1 3. 3. 3. 3. 3.0 3.1 3.1 3.1 3.1.9 3.0 3.0 3.0 3.0..9.9 3.0.9.7..9.9.0.......7.7.7.7.5......5.5.5.5...5.5.5.3.3...0./ 3.0..5.5..3.3...3...3.3..1.1...1.0.1.1.1.1 1.9.0.0.0.0.1/ 5.9.1..1.0/ 5..0.0.0.0 1.9 1.9 1.9 1.9 1.9 1.7 1. 1. 1. 1. 1.7 1.7 1. 1. 1. 1. 1. 1.7 1.7.0 1.9 1.9 1.9 1.7 1. 1. 1. 7. 1./ 1. 1.7 1.7 1.7 1.5 1.5 1. 1. 1. 1. 1.5 1.5 1.5 1.5 1.3 1. 1. 1. 30.0 1./. 1.7 1. 1.7/.3 1.5 1.5 1.5 1. 1. 1. 1. 1.3 1.3 1.3 1.3 1.3 1. 1. 1.3 1.3 1.3 1.1 1.1 1. 1. 3.0 1.5/ 31.3 1. 1./ 31.1 1.3 1.3 1.3/ 30.7 1. 1. 1. 30.3 1./ 1.1 1.1 1.1 1.1 1.0 1.1 1.1 1.1 1.1 0.9 0.9 1.0 1.0 3.0 1.3/ 33.9 1./ 33.7 1. 1.1/ 33.5 1.1 1.1 1.0/ 33.1 1.0 1.0 0.9 0.9/ 3.7 0.9 0.9 0.9 0.9 0.7 0. 0. 0. 3.0 1.0 0.9 0.9 0./ 35.9 0. 0. 0.7/ 35. 0.7 0.7 0.7 0./ 35.1 0. 0. 0. 3.0 1.0/ 3.3 0.9/ 3. 0. 0.7 0.7 0. 0. 0. 0.5 0.5 0.5 0.0 0.7/ 0./ 3.7 3. 0.5 0./ 3.3 0.5 0.5 0. 0..0 0.5/ 1.1 0./ 1.0 0. 0.3/ 0. 0.3.0 0.3/ 3. 0./ 3..0 TABLE no. 0R-0/195/0./0. SHFS5 Number of strands 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Comments: 1. The specified safe working load values apply for level and stable stance of the machine.. The safe working load values are specified in tons (t) and apply for 30 degrees. 3. The safe working loads take the standards ISO 305 Tab. 1+, and the tilt angle method (tilt angle ) into account. Deduct the weight of the load handling devices (hook, suspension gear) from the safe working loads. 5. The safe working loads apply for the maximum undercarriage track width.. The working load values must be limited or reduced in order to take unfavorable conditions into account, such as soft or uneven ground, inclined slopes, wind, lateral forces, swinging loads, jerking or sudden stopping of the load, inexperience of the personnel or driving with a load. 7. Permissible rope winch per strand in crane operation for rope diameter at mm,000 kg at rope diameter mm,500 kg. Safe working loads apply for the SHFS boom (boom assembly in accordance with the operating manual) 9. Safe working loads apply for optimum boom assembly and a pulley head with plastic pulleys. Technical data and dimension information subject to change. 9
Safe working loads SHFS Fixed fly boom. t Main boom length [m] 5 1.7 1.5.3 7.1 9.9 3.7 Working radius [m] 5.0.0 7.0 Fly boom length [m].0 9.0.0 15.0 1.0.0 9.0.0 15.0 1.0.0 9.0.0 15.0 1.0.0 9.0.0 15.0 1.0.0 9.0.0 15.0 1.0.0 9.0.0 15.0.0/ 7..0/ 7.5 11.9/ 7..0 11.9.7/.9 11.9 11.9 9.0..7.5./ 9.../ 9. 9..5/ 9.9 9.5 9..0 9.3../. 9.../. 9.0.5.7.5.5./.3.. 7.7/ 11.0.1.3..7/ 11.7.0.3. 7.9.1.1/ 11.1 7. 7..1/ 11. 7. 7..0/ 11. 7.3 7..0 7.1 7.3.1.7 3.9/. 7.0 7.3.1. 7.0 7..1.9/../..9 7.0.1./.5 9.3/.9.5/.7..9.0..7.0/.1 13.0.3..1. 3.9.3.5.1.5 3.9/ 13.1...0.5 3./ 13..1..0.5 3./ 13..1..0.5 5.9.0 5.9.5/ 13..0 5.7 5.9.0.5 3. 5. 5..0.5 3. 5. 5. 5.9.5 3. 5.5 5.7 5.9.5 3. 5. 5.7 5.7.. 3.7/ 5. 5.5 5.5.5 15.0 5. 5.3 5.5. 3. 5.1 5.3 5.. 3. 5.0 5. 5.. 3.7.9 5.1 5.3. 3.7.9 5.1 5.3. 3.7. 5.0 5.1. 1.0.7. 5.0. 3.7...9. 3.7.5.7.9. 3.7.... 3.7.... 3.7.3.5.. 17.0.3...3 3...3.5.3 3..1.3..3 3..0...3 3..0..3. 3. 3.9.1..3 1.0 3.9.1.. 3. 3..0.1. 3. 3.7 3.9.0. 3. 3.7 3..0.1 3. 3. 3. 3.9.0 3. 3.5 3.7 3.9.0 19.0 3. 3.7 3. 3.9 3.5 3.5 3. 3. 3.9 3.5 3. 3. 3.7 3. 3.5 3.3 3.5 3. 3.7 3. 3.3 3.5 3. 3.7 3.5 3. 3. 3.5 3. 0.0 3.3 3. 3. 3. 3. 3. 3. 3.5 3. 3.5 3.1 3.3 3. 3.5 3.5 3.1 3. 3.3 3. 3.5 3.0 3. 3.3 3. 3.5.9 3.1 3. 3.3.0..9 3.0 3.1 3..7.9 3.0 3.1 3.1.7..9 3.0 3.1..7..9 3.0.5.7..9.9...7..0.5/ 3.5.5..7..3..5..7.3..5....3..5.5.1....5.0..3..0..3...0.1..3.3 1.9.0.1..3 1. 1.9.0.1. 1. 1.9.0.1.1 1.7 1. 1.9.0.0.1/.5.0.1.1 1. 1.9.0.0 1.7 1.7 1. 1.9.0 1. 1.7 1.7 1. 1.9 1.5 1. 1.7 1. 1. 1. 1.5 1. 1.7 30.0 1./ 9.5 1. 1. 1.7/ 9.0 1. 1.7 1.. 1./ 1.5 1. 1. 1.7 1.3 1. 1.5 1. 1. 1.3 1. 1. 1.5 1. 1. 1.3 1. 1. 3.0 1. 1. 1. 1.5 1.5 1.3/ 31. 1.3 1. 1.5 30. 1./ 1. 1.3 1.3 1. 1.1 1.1 1. 1.3 1.3 1.0 1.0 1.1 1. 3.0 1.5/ 3.5 1. 1.3 1.3 1.1 1. 1.3 1.3/ 35. 1./ 3.9 1.1 1.1/ 1.0/ 33. 1.1 1.1 1. 0.9/ 33.3 0.9 1.0 1.1 1.1 0. 0.9 0.9 1.0 3.0 3. 1.0 1.1 0.9 0.9 1.0 0. 0. 0.9 0.9 0. 0.7 0. 0. 3.0 1.0/ 37. 0.9/ 37. 0.9 0./ 3. 0. 0. 0./ 3.3 0.7 0.7 0. 3.5 0./ 0.5 0. 0. 0.0 0. 0./ 39. 0.7 0./ 39. 0. 0. 0.5/ 3.7 0.5 0.5.0 0.7/ 0.3 0.5 0.5 0.5 0.3/ 1.7 0..0 0.5/.7 0./. 0. 0.3 0.3/.0 TABLE no.. 0R-0/195/0./0. SHFS5 5. Number of strands 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Comments: 1. The specified safe working load values apply for level and stable stance of the machine.. The safe working load values are specified in tons (t) and apply for 30 degrees. 3. The safe working loads take the standards ISO 305 Tab. 1+, and the tilt angle method (tilt angle ) into account. Deduct the weight of the load handling devices (hook, suspension gear) from the safe working loads. 5. The safe working loads apply for the maximum undercarriage track width.. The working load values must be limited or reduced in order to take unfavorable conditions into account, such as soft or uneven ground, inclined slopes, wind, lateral forces, swinging loads, jerking or sudden stopping of the load, inexperience of the personnel or driving with a load. 7. Permissible rope winch per strand in crane operation for rope diameter at mm,000 kg at rope diameter mm,500 kg. Safe working loads apply for the SHFS boom (boom assembly in accordance with the operating manual) 9. Safe working loads apply for optimum boom assembly and a pulley head with plastic pulleys. Technical data and dimension information subject to change.
Main boom with fixed fly SHFS Boom configuration Boom length Main boom Fixed fly jib 1.7 1.5.3 7.1 9.9 3.7.0 9.0.0 15.0 1.0 Lower boom section, type 1370. m 1 1 1 1 1 1 Intermediate boom section, type 1370. m 1 1 1 Intermediate boom section, type 1370 5. m 1 1 1 1 Intermediate boom section, type 1370 11. m 0 0 0 0 1 1 Boom headpiece, type 1370 5.9 m 1 1 1 1 1 1 Fly boom lower section, type 59 3.0 m 1 1 1 1 1 Fly boom intermediate section, type 59 3.0 m 0 1 3 Fly boom head piece, type 59 3.0 m 1 1 1 1 1 Combination possibilities SHFS Length fixed fly Boom configuration Main boom 1.7 1.5.3 7.1 9.9 3.7.0 m x x x x x x 9.0 m x x x x x x.0 m x x x x x x 15.0 m x x x x x x 1.0 m x x x x x Hooks For 0 kn winches with mm rope diameter Capacity Weight Rope strands and maximum safe working load [kg] 5 3 1 t 00 kg,500 5 t 1-pulley 0 t -pulley 300 kg 5,000 17,000,500 350 kg 0,000 3,000 5,500 17,000,500 For 10 kn winches with mm rope diameter Capacity Weight Rope strands and maximum safe working load [kg] 5 3 1 15 t 300 kg,000 0 t 1-pulley 0 t -pulley 500 kg 3,000,000,000 00 kg 0,000 3,000,000,000 Technical data and dimension information subject to change. 11
30 50 Grab equipment 0 70 0 0 1 30 1 15,3m 1,5m 1,7m 15,9m 13,1m 0 0 Comments: 1. The specified safe working load values apply for level and stable stance of the machine.. The safe working load values are specified in tons (t) and apply for 30 degrees. 3. The safe working loads apply for the maximum outrigger width undercarriage track width of 300 mm. The specified safe working loads include the grapple weight and do not exceed.7% of the tipping load 1 1 0 5. For operation with a mechanical two-rope grapple, the safe working load is limited by the permissible rope tension or the maximum winch pulling force of a winch. Winch pulling force [kn] 10 0 Rope diameter [mm] Minimum tensile strength [kn] 5 Permissible rope winch [t] 1.0.0 Boom length [m]. t 13.1 15.9 1.7 1.5.3 Boom angle R H R H R H R H R H alpha [ ] m m t m m t m m t m m t m m t 70 5. 13. 1.9. 1. 13.3 7.7 19.0.9.7 1.7 9.1 9..3 7.7 5. 13.3 13.1.0 15..3 9. 1... 0.9 7.0 11. 3. 5.9 0 7..7.7 9. 15.1.. 17..9.0 0.0 5.7 13... 55..1 9.1.. 7.1.0 1. 5. 13. 1.9. 15. 1..0 50 9.7 11.3.0 11.5 13.5. 13.3 15. 5.0 15.1 17..1 1.9 19.9 3. 5.5.5 7.1..5 5...5.5 1. 1.5 3. 1. 1. 3.0 0 11. 9..5 13.3 11. 5.0 15.5 13..0 17. 15.0 3.3 19. 1..7 35 11.9.7.0..3. 1.5 11.9 3.7 1.7 13.5 3.0 1.0 15.1. 30. 7.7 5..9 9.1.3 17.3.5 3. 19.7 11.9.7.1 13.3. 5.9.7 5. 15.5 7.9.1 1.0 9.1 3.3 0.5.. 3.1 11..1 0 13.3 5. 5.1 1.0. 3.9 1. 7.5 3.1 1..5.5 3. 9..0 15 13..5 5.0 1.3 5. 3. 19.0.0 3.0 1.7.7.. 7. 1.9 Technical data and dimension information subject to change.
0 50 Dragline bucket equipment R 0 1 30 1 0 15 H,3m 1,5m 1,7m 15,9m 13,1m 0 A T 30 0 1 1 0 Comments: 1. The specified safe working load values apply for level and stable stance of the machine.. The safe working load values are specified in tons (t) and apply for 30 degrees. 3. The safe working loads apply for the maximum outrigger width undercarriage track width of 300 mm.. The specified safe working loads include the grapple weight and do not exceed 75% of the tipping load. 5. Motor and winch equipment as required (the specified values apply for maximum equipment and average conditions).. The dragline bucket size must be configured in accordance with the given conditions. Dredging arc: R = Working radius A = Maximum dredging width = approximately R + 1/3 to 1/ (H-K) T = Dredging depth = approximately 0-50% of R H = Height K = Length of the dragline bucket. t Boom length [m] 13.1 15.9 1.7 1.5.3 Boom angle R H R H R H R H R H alpha [ ] m m t m m t m m t m m t m m t 50 9.7 11.3.9 11.5 13.5.9 13.3 15. 5. 15.1 17.. 1.9 19.9 3. 5.5.5 7.9..5...5.9 1. 1.5.0 1. 1. 3.3 0 11. 9. 7. 13.3 11. 5. 15.5 13..5 17. 15.0 3. 19. 1..9 35 11.9.7.7..3 5.1 1.5 11.9.1 1.7 13.5 3.3 1.0 15.1.7 30. 7.7..9 9.1. 17.3.5 3. 19.7 11.9 3.0.1 13.3. 5.9.7 5.9 15.5 7.9.5 1.0 9.1 3. 0.5.. 3.1 11..3 0 13.3 5. 5.7 1.0..3 1. 7.5 3. 1..5.7 3. 9.. 15 13..5 5.5 1.3 5.. 19.0.0 3.3 1.7.7.. 7..1 Technical data and dimension information subject to change. 13
Dimensions 0 305 35 700 300 500 30 30 50 350 5305 3990 0 with counterweight. t, telescopic undercarriage T1/30, lower boom section x t freefall winch approx 3,700 kg 350 315 70 300 3000 30 30 50 770 5305 3990 0 without counterweight, lower boom section x t freefall winch, approx. 30,500 kg Ballast installation system Technical data and dimension information subject to change. Dimension information in [mm]
Transport dimensions Lower boom section. m, type 1370 Weight: 50 kg (maximum 1,300 kg) 130 Intermediate boom section., type 1370 (DL) with deflection sheave for dragline bucket operation Weight: 7 kg (incl. holding ropes) Intermediate boom section. m, type 1370 13 5 Weight: 300 kg (incl. holding ropes) Intermediate boom section 5., type 1370 with deflection sheave for dragline bucket operation Weight: 90 kg (incl. holding ropes) Intermediate boom section 11. m, type 1370 Weight: 70 kg (incl. holding ropes) Boom head piece 5.9 m, type 1370 steel pulleys: 10 kg (incl. holding ropes) plastic pulleys: 90 kg (incl. holding ropes) Auxiliary jib S.5 70 Weight: 0 kg Counterweight 1500 5 5 300 00 Weight: 00 kg Lower boom section 3 m, type 59 Weight: 330 kg Intermediate boom section 3 m, type 59 Weight: 0 kg (incl. holding ropes) Boom headpiece 3 m, type 59 790 Weight: kg (incl. holding rope) Technical data and dimension information subject to change. Dimension information in [mm] 15
This catalog describes machine models, the scope of equipment of individual models, and configuration possibilities (standard equipment and optional equipment) of the machines delivered by SENNEBOGEN Maschinenfabrik. Machine illustrations can contain optional equipment and supplemental equipment. Depending on the country in which the machines are delivered, deviations from the equipment are possible, particularly with regard to standard equipment and optional equipment. All product designations used can be trademarks of SENNEBOGEN Maschinenfabrik GmbH, or trademarks of other supplying companies, the use of these trademarks by third parties for purposes of the third party can violate the rights of the owners. Please contact your local SENNEBOGEN sales partner for information concerning the equipment variants offered. Desired performance characteristics are only binding if they are expressly agreed when the contract is concluded. Delivery possibilities and technical features are subject to change. All information is provided without guarantee. We reserve the right to make equipment changes and further developments. SENNEBOGEN Maschinenfabrik GmbH, Straubing/Germany. Reproduction, even in part, only with written permission of SENNEBOGEN Maschinenfabrik GmbH, Straubing/Germany. SENNEBOGEN Maschinenfabrik GmbH Sennebogenstrasse 9315 Straubing, Germany Tel. +9 91 50-/ Fax +9 91 3 marketing@sennebogen.de Order no. / Item no. 1753 0-E-0315 www.sennebogen.de