Vacuum Breakers. Brass Construction 3/4 MHT Outlet

Similar documents
CNC DISTRIBUTION. ITEM NO Description Quantity

GENE RICH SPECIALTIES

Cast Iron Valves. Product Information. It s all at Albion

Valves for building. Y-strainers... page 204 PVC valves Ball valves... page 204 Butterfly valve... page 204 Ball check valve...

Valves for building. Y-strainers... page 272 PVC valves Ball valves... page 272 Butterfly valves... page 272 Ball check valves...

TABLE OF CONTENTS. BALL VALVE Full port Standard port...5 Gas...5 Pex...6 Long bonnet...8 T-handle...5 Balancing valve...13

PRESS SWING CHECK VALVES. UPC NSF1-8 Double O-Ring Blow Out Proof Stem 250 CWP Max Temp: 300 F

ANGLE BALL VALVES STRAIGHT BALL VALVES STRAIGHT BRASS BALL VALVES BARB BRASS BALL VALVES. Description STANDARD PORT BALL VALVES.

5015AB ECO-VALVE. Low Lead Brass Pex End Ball Valve

VES VAL NEW NEW NEW NEW NEW NEW NEW NEW NEW NEW NEW

1.2 REFERENCES.1 American National Standards Institute (ANSI)/ American Society of Mechanical Engineers (ASME)

Page Concealed Flush Valve (1976 on)

WATTS/Taras. Water Treatment Valves and Accessories. Commercial. Residential

PLUMBING VALVES TOTAL MAINTENANCE SOLUTIONS

CONTENTS. Bronze Ball Valve (Threaded) 1. Bronze NRS Gate Valve (Threaded) 2. Bronze RS Gate Valve (Threaded) 3. Bronze Swing Check Valve (Threaded) 4

ROUGH PLUMBING. premium industrial products

SECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING

KVC VALVES AND PEX FITTINGS

BRASS & BRONZE VALVES

SECTION 3 PLUMBING VALVES

flowit by Fig. FTBGW-20 Bronze Gate Valve, Non-Rising Stem BS 5154 PN20 Material Specifications Dimensions (mm)

Cast-Iron Valves G101 DI BUTTERFLY VALVE LEVER... 2 G401 CI GLOBE VALVE CL G403 CI GLOBE VALVE PN G103 DI BUTTERFLY VALVE GEAR...

Lead-free valves for potable water systems. Rev 02/17

SECTION VALVES PART 1 -GENERAL

SECTION GENERAL-DUTY VALVES FOR HVAC PIPING. A. Contents of Division 23, HVAC and Division 01, General Requirements apply to this Section.

BS 1452 Gr Gr. 420/ Gr. 420/ AB2 304 C C S S S S16. E mm


SECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING

Brass, Bronze, Iron and Stainless Steel Valves

Industrial Bronze and Iron Price List

Industrial Bronze and Iron Price List

Industrial Bronze and Iron Price List

Industrial Bronze and Iron Price List

FIP 2 Outlet Angle Valve 3/8" V1-AB M2-AB006 3/8 IPS Escutcheon. M2-AB008 1/2" IPS CP Escutcheon. Hose Bibb Celecon V2-AB /4"

Jones Stephens Corp. PlumBest LTConnections SECTION D - FITTINGS & VALVES. Brass Compression Fittings

CV-SFS4-PN16 SERIES SLIENT CHECK VALVE, GLOBE TYPE FEATURES SPECIFICATIONS PRODUCT IDENTIFICATION SYSTEM PRODUCT DATA

CATALOGUE Valves ~ Faucets ~ Specialties ~ Fittings & Nipples

Industrial Bronze and Iron Price List

UNITED BRASS WORKS, INC. 714 S. Main St., Randleman, NC Tel: Fax:

Lead-free valves for potable water systems.

Valve Selection. 1. Function and service considerations

SECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING

CATALOG C-PSP-0311 AHEAD OF THE FLOW. Plumbing Specialty Products

SECTION VALVES

TECHNICAL CATALOGUE WASHING MACHINE VALVES

STC Manual & Actuated Process Valves

2010 PRODUCT CATALOG QUALITY AND COMMITMENT TO TECHNOLOGY AND SERVICE SINCE 1954

GW MK3 DELUGE VALVE HYDRAULIC & PNEUMATIC SPARES 100mm (4 ) 150mm (6 ) 200mm (8 )

Manufacturer & Supplier of High Quality Industrial Valves. Manufacturer & Supplier of High Quality Industrial Valves

Condensed Valve Guide Gate Globe Check Ball Strainer. Warren Valve - Quality Since 1963

SECTION GENERAL-DUTY VALVES FOR HVAC. A. Section includes valves for building services piping.

Union County Vocational - Technical Schools Scotch Plains, New Jersey

Michigan State University Construction Standards. GENERAL-DUTY VALVES FOR PLUMBING PIPING Page

BOSHART INDUSTRIES BRASS GATE VALVE WITH DRAIN

SECTION VALVES. A. Extent of Valve Work is indicated on the Drawings and by the Requirements of this Section.

The GACHOT V501 gate valve offer the most possible reliability for process and critical applications

2 NPT FILTER REPLACEMENT SCREENS FOR 1 1/4 & 2 FILTERS

1 1/4 NPT FILTER 2 NPT FILTER REPLACEMENT SCREENS FOR 1 1/4 & 2 FILTERS 1 1/4 SCREENS 2 SCREENS. Hole Size Designation 150 Mesh 1M150

SECTION VALVES PART 1 - GENERAL

A. This Section includes general duty valves common to several HVAC piping systems.

Hattersley Newman Hender Ltd

A. American National Standards Institute: 1. ANSI Z Relief Valves for Hot Water Supply Systems.

Fire Protection Valves

BACKFLOW PREVENTERS DUAL-CHECK BACKFLOW PREVENTER WITH ATMOSPHERIC VENT T/S-459 Certified to ASSE Standard 1012

Brown University Revised August 3, 2012 Facilities Design & Construction Standards SECTION HVAC&R VALVES

DIVISION 23 HEATING, VENTILATING, AND AIR CONDITIONING (HVAC) SECTION HVAC VALVES

Approved. Size L H. 3" (76mm) 9-1/2" (241mm) 5-51/64" (147mm) 46. 4" (102mm) 11-1/2" (292mm) 6-45/64" (170mm) 81

CUSTOMIZE MORE AND MORE WAYS TO ABC PLUMBING FREE CUSTOMIZATION! ABC PLUMBING SEE BACK FOR DETAILS.

NON RETURN BRASS FLANGED AGA GAS APPROVED

BS 5163 Resilient Wedge Gate Valve

1 1/4 NPT FILTER SIZE DESIGNATION PRICE 2 NPT FILTER REPLACEMENT SCREENS FOR 1 1/4 & 2 FILTERS 1 1/4 SCREENS 2 SCREENS HOLE SIZE DESIGNATION PRICE

Trunnion Ball Valve Catalogue

RESILIENT SEATED BUTTERFLY VALVES. Howell Valve & Automation. Toll Free: Howellvalve.com

Condensed Valve Guide Gate Globe Check Ball Strainer. Warren Valve - Quality Since 1963

Model-1 Natural Gas Valves

Stainless Steel Valves

Henderson Engineers, Inc. SECTION GENERAL DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL REQUIREMENTS

Ball Valves. Full Port Ball Valves - Compression w/ Drain Cap - Forged Brass. Full Port Mini Ball Valve - Forged Brass 05/06/15

2 PC FULL BORE BALL VALVE

DN 3/8" Male, free nut BSP 0 C + 90 C Max Pressure : 10 Bars Specifications : For flush tank

UP-0718 Effective: July 2, 2018

UP-0318 Effective: March 1, 2018

SECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING

3-Way Brass Ball Valves L or T Port Design, 400 PSI WOG 1/4 to 3 NPT

Electrically operated valves Series MF-04 for manifold mounting, 5/2- and 5/3-way G1/8 360 Nl/min (0.366 Cv)

PASSAIC COUNTY TECHNICAL INSTITUTE CCA 1422 NEW S.T.E.M. BUILDING 2017

A. This Section includes the following domestic water piping specialties:

V A L V E S. rice List of. Controlling fluids is our expertise TERMS & CONDITIONS : An ISO:9001 Co. PRICE LIST NO. : JMW / 3 0 W.E.

TABLE OF CONTENTS IND0610 EFFECTIVE SUPERCEDES 1109 BRONZE GATE VALVES PAGE 1 BRONZE GLOBE/ANGLE VALVES PAGE 2 SIMILARITY CHART-PART 2 PAGE 12

JHawk Instrument Inc. warrants the

SECTION (15110) - GENERAL DUTY VALVES FOR PLUMBING PIPING

UP-0515 Effective: 05/18/15

2/2 ) % ) % ) Assemblies. Solenoid and Piloted Piston Valve Series Condensate Drain Valve Assemblies. Brass or Stainless Steel Bodies 1/4" to 1" NPT

Rigid/Swivel Optional Spouts

IN-LINE DISC & PISTON VALVES

catalog C-NPS-1014 NIBCO Press System

Quarter Turn Ball Valve Systems 2 Pcs Body Design with Threaded Ends

3 PC FULL BORE BALL VALVE

S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR

Approved Branded Traceable Fire Protection & Waterworks Valves

Transcription:

Vacuum Breakers Brass Construction 3/4 MHT Outlet MASTER ITEM # DESCRIPTION INNER CAR- TON QTY CARTON QTY HPVVBRB 3/4 FHT x 3/4 MHT Rough Brass 20 200 HPVVBCP 3/4 FHT x 3/4 MHT Chrome Plated 20 200 1 Body Brass 2 Washer Neoprene 3 Diaphram POM 4 Diaphram Nitrile Rubber 5 Piston POM 6 Spring 304 Stainless Steel 7 Set Screw Steel Brass Construction 3/4 MHT Outlet MASTER ITEM # DESCRIPTION INNER CAR- TON QTY CARTON QTY HPVVBRBLF 3/4 FHT x 3/4 MHT Rough Brass 20 200 HPVVBCPLF 3/4 FHT x 3/4 MHT Chrome Plated 20 200 1 Body Brass 2 Washer Neoprene 3 Diaphram POM 4 Diaphram Nitrile Rubber 5 Piston POM 6 Spring 304 Stainless Steel 7 Set Screw Steel

Brass Silcocks Sweat connection 3/4 MHT Outlet Valves are NOT LEAD FREE ITEM # DESCRIPTION D D1 D2 L H HPVSCS12 1/2 Ø2.087 Ø.512 Ø.630 0.512 2.303 1 Body Brass 2 Screw Brass 3 Gasket NBR 4 Cap Brass 5 Stem Brass 6 Stuffing NBR 7 Gland Nut Brass 10 Nut Steel

Brass Silcocks FIP connection 3/4 MHT Outlet Valves are NOT LEAD FREE ITEM # DESCRIPTION D D1 L H HPVSCF12 1/2 Ø2.087 Ø.512 0.512 2.303 1 Body Brass 2 Screw Brass 3 Gasket NBR 4 Cap Brass 5 Stem Brass 6 Stuffing NBR 7 Gland Nut Brass 10 Nut Steel

Swing Check Valves Sweat connection Straight pattern 200 PSI / WOG ITEM # DESCRIPTION D H L L1 d HPSCHS12LF 1/2 Ø.5118 1.390 2.413 0.5709 0.6299 HPSCHS34LF 3/4 Ø.7087 1.496 3.189 0.7283 0.878 HPSCHS1LF 1 Ø.9055 1.681 3.563 0.9055 1.13 HPSCHS114LF 1-1/4 Ø1.26 2.059 4.280 0.9646 1.378 HPSCHS112LF 1-1/2 Ø1.476 2.272 4.748 1.102 1.63 HPSCHS2LF 2 Ø1.732 2.665 5.413 1.417 2.126 1 Body Lead Free Brass 2 Bonnet Lead Free Brass 3 Disc Lead Free Brass 4 Pin Stainless Steel 5 Nut Lead Free Brass

Swing Check Valves IPS connection Straight pattern 200 PSI / WOG ITEM # DESCRIPTION D H L L1 d HPSCHF12LF 1/2 Ø.5118 1.378 2.067 0.5512 0.5118 HPSCHF34LF 3/4 Ø.7087 1.496 2.382 0.6496 0.5512 HPSCHF1LF 1 Ø.9252 1.681 2.913 0.7087 0.6299 HPSCHF114LF 1-1/4 Ø1.22 2.059 3.248 0.8268 0.7283 HPSCHF112LF 1-1/2 Ø1.496 2.272 3.799 0.8661 0.7874 HPSCHF2LF 2 Ø1.732 2.665 4.291 0.9252 0.8661 1 Body Lead Free Brass 2 Bonnet Lead Free Brass 3 Disc Lead Free Brass 4 Pin Stainless Steel 5 Nut Lead Free Brass

Spring Check Valves IPS connection 125 PSI / 200 WOG ITEM # DESCRIPTION L L1 HPSPCFLF12 1/2 2.44.43 HPSPCFLF34 3/4 2.72.47 HPSPCFLF1 1 3.23.55 1 Body C46500 Brass 2 Check Module C46500 Brass 3 O-Ring Neoprene 4 Gasket ABS 5 Spring Stainless Steel 6 Gasket Stainless Steel 7 Nut Stainless Steel

Gate Valves Sweat connection Non rising stem 200 PSI ITEM # DESCRIPTION D H L D1 D2 HPVSG12LF 1/2 Ø2.086 2.638 1.705 Ø0.629 Ø.512 HPVSG34LF 3/4 Ø2.086 2.913 2.205 Ø0.878 Ø.669 HPVSG1LF 1 Ø2.322 3.189 2.598 Ø1.129 Ø.768 HPVSG114LF 1-1/4 Ø3.071 3.661 2.913 Ø1.378 Ø1.102 HPVSG112LF 1-1/2 Ø3.071 4.291 3.149 Ø1.629 Ø1.339 HPVSG2LF 2 Ø3.071 5.236 3.661 Ø2.129 Ø1.713 1 Body Lead Free Brass 2 Disc Lead Free Brass 3 Stem Lead Free Brass 4 Bonnet Lead Free Brass 5 Lock Nut Lead Free Brass 6 Nut Brass 7 Gland Packing PTFE 10 Nut Q235 Steel

Gate Valves IPS connection Non rising stem 200 PSI ITEM # DESCRIPTION D H L d HPVTG12LF 1/2 Ø2.086 2.638 1.634 Ø.512 HPVTG34LF 3/4 Ø2.086 2.913 1.831 Ø.669 HPVTG1LF 1 Ø2.322 3.189 1.976 Ø.768 HPVTG114LF 1-1/4 Ø3.071 3.661 2.295 Ø1.102 HPVTG112LF 1-1/2 Ø3.071 4.291 2.362 Ø1.338 HPVTG2LF 2 Ø3.071 5.236 2.480 Ø1.713 1 Body Lead Free Brass 2 Disc Lead Free Brass 3 Stem Lead Free Brass 4 Bonnet Lead Free Brass 5 Lock Nut Lead Free Brass 6 Nut Brass 7 Gland Packing PTFE 10 Nut Q235 Steel

Lead Free Hose Bibbs 3/4 MHT Outlet ITEM # DESCRIPTION D D1 L L1 L2 H HPVHBMS12LF 1/2 0.39 0.63 2.01 0.51 0.59 1.62 HPVHBMS34LF 3/4 0.39 0.79 2.01 0.55 0.63 1.62

Extended Hose Bibbs 3/4 MHT Outlet ITEM # DESCRIPTION D D1 L L1 L2 L3 H HPVHBEMS12 1/2 0.394 0.630 3.051 2.480 0.531 0.591 1.524 HPVHBEMS34 3/4 0.394 0.748 3.170 2.480 0.670 0.709 1.524 1 Body Brass 2 Bonnet Brass 3 Seat Seal PTFE 4 Ball Brass 5 Stem Brass 6 O-Ring NBR 7 Handle Aluminum 8 Name Plate Aluminum 9 Handle Screw Brass

Compression Style Valves Sweat connection ITEM # DESCRIPTION D D1 D2 L1 L2 H HPVCSS12LF 1/2 Ø2.087 Ø.512 0.629 0.551 2.165 2.433 HPVCSS34LF 3/4 Ø2.087 Ø.512 0.878 0.748 2.717 2.433 1 Body Lead Free Brass 2 Screw Brass 3 Gasket NBR 4 Cap Lead Free Brass 5 Stem Lead Free Brass 6 Stuffing NBR 7 Gland Nut Lead FRee Brass 10 Nut Steel

Compression Style Valves IPS connection ITEM # DESCRIPTION D D1 L L1 L2 H HPVCSF12LF 1/2 Ø2.087 Ø.532 0.472 0.551 2.067 2.433 HPVCSF34LF 3/4 Ø2.087 Ø.532 0.571 0.649 2.303 2.433 1 Body Lead Free Brass 2 Screw Brass 3 Gasket NBR 4 Cap Lead Free Brass 5 Stem Lead Free Brass 6 Stuffing NBR 7 Gland Nut Lead FRee Brass 10 Nut Steel

Compression Style Stop and Waste Valves Sweat connection ITEM # DESCRIPTION D D1 D2 L1 L2 H HPVCSWS12LF 1/2 Ø2.087 Ø.512 0.629 0.551 2.165 2.433 HPVCSWS34LF 3/4 Ø2.087 Ø.512 0.878 0.748 2.717 2.433 1 Body Lead Free Brass 2 Screw Brass 3 Gasket NBR 4 Cap Lead Free Brass 5 Stem Lead Free Brass 6 Stuffing NBR 7 Gland Packing PTFE 10 Nut Q235 Steel 11 Gasket NBR 12 Cap Brass

Compression Style Stop and Waste Valves IPS connection ITEM # DESCRIPTION D D1 L L1 L2 H HPVCSWF12LF 1/2 Ø2.087 Ø.532 0.472 0.551 2.067 2.433 HPVCSWF34LF 3/4 Ø2.087 Ø.532 0.571 0.649 2.303 2.433 1 Body Lead Free Brass 2 Screw Brass 3 Gasket NBR 4 Cap Lead Free Brass 5 Stem Lead Free Brass 6 Stuffing NBR 7 Gland Packing PTFE 10 Nut Q235 Steel 11 Gasket NBR 12 Cap Brass

Large Diameter Gate Valves Sweat connection Non rising stem 200 PSI / WOG VALVES ARE NOT LEAD FREE! ITEM # DESCRIPTION D H L D1 D2 HPVSG212 2-1/2 Ø3.819 5.945 4.409 2.63 2.205 HPVSG3 3 Ø4.25 6.732 4.921 3.13 2.598 1 Body Brass 2 Disc Brass 3 Stem Brass 4 Bonnet Brass 5 Lock Nut Brass 6 Nut Brass 7 Gland Packing PTFE 10 Nut Q235 Steel

Large Diameter Gate Valves IPS connection Non rising stem 200 PSI / WOG VALVES ARE NOT LEAD FREE! ITEM # DESCRIPTION D H L d HPVTG212 2-1/2 Ø3.819 5.945 3.307 2.205 HPVTG3 3 Ø4.252 6.732 3.701 2.736 HPVTG4 4 Ø4.961 8.189 3.976 3.386 1 Body Brass 2 Disc Brass 3 Stem Brass 4 Bonnet Brass 5 Lock Nut Brass 6 Nut Brass 7 Gland Packing PTFE 10 Nut Q235 Steel

Frost Free Silcocks Chrome plated brass body Multi turn operation 1/2 IPS or 1/2 Sweat connection 3/4 MHT Outlet Valves are NOT LEAD FREE ITEM # DESCRIPTION A B C D E HPVFP124 4 Length 3.2 3.65 4 1.12 1.04 HPVFP126 6 Length 3.2 3.65 6 1.12 1.04 HPVFP128 8 Length 3.2 3.65 8 1.12 1.04 HPVFP1210 10 Length 3.2 3.65 10 1.12 1.04 HPVFP1212 12 Length 3.2 3.65 12 1.12 1.04

Frost Free Silcocks Chrome plated brass body Quarter turn operation 1/2 IPS or 1/2 Sweat connection 3/4 MHT Outlet Valves are NOT LEAD FREE ITEM # DESCRIPTION A B C D E HPVQFP124 4 Length 3.2 3.65 4 1.12 1.16 HPVQFP126 6 Length 3.2 3.65 6 1.12 1.16 HPVQFP128 8 Length 3.2 3.65 8 1.12 1.16 HPVQFP1210 10 Length 3.2 3.65 10 1.12 1.16 HPVQFP1212 12 Length 3.2 3.65 12 1.12 1.16

Boiler Drains 3/4 MHT Outlet ITEM # DESCRIPTION H D d d1 HPVBDU12 1/2 MIP OR 1/2 SWEAT 3.465 Ø.512 Ø.630 Ø2.087 HPVBDM34 3/4 MIP 3.465 Ø.512 Ø.780 Ø2.087 1 Body Brass 2 Gasket NBR 3 Stem Brass 4 Screw Brass 5 Cap Brass 6 Gasket PTFE 7 Gland Nut Brass 8 Stuffing NBR 9 Hand Wheel Cast Iron 10 Name Plate Aluminum 11 Nut Steel 1 Body Brass 2 Screw Brass 3 Gasket NBR 4 Cap Brass 5 Stem Brass 6 Stuffing NBR 7 Gland Nut Brass 10 Nut Steel ITEM # DESCRIPTION D D1 L L1 H HPVBDF12 1/2 FIP Ø2.087 Ø.512 0.551 0.610 3.110 HPVBDF34 3/4 FIP Ø2.087 Ø.512 0.591 0.650 3.150

2024 © autodocbox.com Privacy Policy | Terms of Service | Feedback